BZPEERPapers, people, evidence and research pathsDiscover
Research tools
Network
Opportunities
Account
Source author record
Lili Wang appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.
Catalog footprint
Research graph
Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.
BZPEER is loading the nearby papers, people, topics and institutions for this page.
Published work
In this paper, we introduce Steklov and Neumann isocapacitary constants for the $p$-Laplacian on compact manifolds. These constants yield two-sided bounds for the $(p,α)$-Sobolev constants, which degenerate to upper and lower bounds for the first nontrivial Steklov and Neumann eigenvalues of the $p$-Laplacian when $α= 1$.
Non-proportional hazards (NPH) have been observed recently in many immuno-oncology clinical trials. Weighted log-rank tests (WLRT) with suitably chosen weights can be used to improve the power of detecting the difference of the two survival curves in the presence of NPH. However, it is not easy to choose a proper WLRT in practice when both robustness and efficiency are considered. A versatile maxcombo test was proposed to achieve the balance of robustness and efficiency and has received increasing attentions in both methodology development and application. However, survival trials often warrant interim analyses due to its high cost and long duration. The integration and application of maxcombo tests in interim analyses often require extensive simulation studies. In this paper, we propose a simulation-free approach for group sequential design with maxcombo test in survival trials. The simulation results support that the proposed approaches successfully control both the type I error rate and offer great accuracy and flexibility in estimating sample sizes, at the expense of light computation burden. Notably, our methods display a strong robustness towards various model misspecifications, and have been implemented in an R package for free access online.
A hybrid observer is described for estimating the state of a system of the form dot x=Ax, y_i=C_ix, i=1,...,m. The system's state x is simultaneously estimated by m agents assuming agent i senses y_i and receives appropriately defined data from its neighbors. Neighbor relations are characterized by a time-varying directed graph N(t). Agent i updates its estimate x_i of x at event times t_{i1},t_{i2} ... using a local continuous-time linear observer and a local parameter estimator which iterates q times during each event time interval [t_{i(s-1)},t_{is}), s>=1, to obtain an estimate of x(t_{is}). Subject to the assumptions that N(t) is strongly connected, and the system is jointly observable, it is possible to design parameters so that x_i converges to x with a pre-assigned rate. This result holds when agents communicate asynchronously with the assumption that N(t) changes slowly. Exponential convergence is also assured if the event time sequence of the agents are slightly different, although only if the system being observed is exponentially stable; this limitation however, is a robustness issue shared by all open loop state estimators with small modeling errors. The result also holds facing abrupt changes in the number of vertices and arcs in the inter-agent communication graph upon which the algorithm depends.
Motivated by Gilbarg-Weinberger's early work on asymptotic properties of steady plane solutions of the Navier-Stokes equations on a neighborhood of infinity \cite{GW1978} , we investigate asymptotic properties of steady plane solutions of this system on a half-neighborhood of infinity with finite Dirichlet integral and Navier-slip boundary condition, and obtain that the velocity of the solution grows more slowly than $\sqrt{\log r}$, while the pressure converges to $0$ along each ray passing through the origin.
While cultural backgrounds have been shown to affect linguistic expressions, existing natural language processing (NLP) research on culture modeling is overly coarse-grained and does not examine cultural differences among speakers of the same language. To address this problem and augment NLP models with cultural background features, we collect, annotate, manually validate, and benchmark EnCBP, a finer-grained news-based cultural background prediction dataset in English. Through language modeling (LM) evaluations and manual analyses, we confirm that there are noticeable differences in linguistic expressions among five English-speaking countries and across four states in the US. Additionally, our evaluations on nine syntactic (CoNLL-2003), semantic (PAWS-Wiki, QNLI, STS-B, and RTE), and psycholinguistic tasks (SST-5, SST-2, Emotion, and Go-Emotions) show that, while introducing cultural background information does not benefit the Go-Emotions task due to text domain conflicts, it noticeably improves deep learning (DL) model performance on other tasks. Our findings strongly support the importance of cultural background modeling to a wide variety of NLP tasks and demonstrate the applicability of EnCBP in culture-related research.
Ultrathin films of intrinsic magnetic topological insulator MnBi2Te4 exhibit fascinating quantum properties such as quantum anomalous Hall effect and axion insulator state. In this work, we systematically investigate the evolution of the electronic structure of MnBi2Te4 thin films. With increasing film thickness, the electronic structure changes from an insulator-type with a large energy gap to one with in-gap topological surface states, which is, however, still drastically different from the bulk material. By surface doping of alkali-metal atoms, a Rashba split band gradually emerges and hybridizes with topological surface states, which not only reconciles the puzzling difference between the electronic structures of the bulk and thin film MnBi2Te4 but also provides an interesting platform to establish Rashba ferromagnet that is attractive for (quantum) anomalous Hall effect. Our results provide important insights into the understanding and engineering of the intriguing quantum properties of MnBi2Te4 thin films.
Determining the pairing symmetry of single-layer FeSe on SrTiO$_3$ is the key to understanding the enhanced pairing mechanism; furthermore, it guides exploring new superconductors with high transition temperatures ($T_\mathrm{c}$). Despite significant efforts, it remains controversial whether the symmetry is the sign-preserving $s$- or the sign-changed $s_{\pm}$-wave. Here, we investigate the pairing symmetry of single-layer FeSe from a topological point of view. Using low-temperature scanning tunneling microscopy/spectroscopy, we have systematically characterized the superconducting states at isolated edges and corners of single-layer FeSe. The tunneling spectra collected at edges and corners exhibit full gap and substantial dip, respectively, demonstrating the absence of topologically non-trivial edge/corner modes. According to the theoretical calculation, these spectroscopic features are strong evidence for the sign-preserving $s$-wave pairing.
State-of-the-art metal halide perovskite-based photovoltaics often employ organic ammonium salts, AX, as a surface passivator, where A is a large organic cation and X is a halide. These surface treatments passivate the perovskite by forming layered perovskites (e.g., A2PbX4) or by AX itself serving as a surface passivation agent on the perovskite photoactive film. It remains unclear whether layered perovskites or AX is the ideal passivator due to an incomplete understanding of the interfacial impact and resulting photoexcited carrier dynamics of AX treatment. In the present study, we use TRPL measurements to selectively probe the different interfaces of glass/perovskite/AX to demonstrate the vastly distinct interfacial photoexcited state dynamics with the presence of A2PbX4 or AX. Coupling the TRPL results with X-ray diffraction and nanoscale microscopy measurements, we find that the presence of AX not only passivates the traps at the surface and the grain boundaries, but also induces an α/δ-FAPbI3 phase mixing that alters the carrier dynamics near the glass/perovskite interface and enhances the photoluminescence quantum yield. In contrast, the passivation with A2PbI4 is mostly localized to the surface and grain boundaries near the top surface where the availability of PbI2 directly determines the formation of A2PbI4. Such distinct mechanisms significantly impact the corresponding solar cell performance, and we find AX passivation that has not been converted to a layered perovskite allows for a much larger processing window (e.g., larger allowed variance of AX concentration which is critical for improving the eventual manufacturing yield) and more reproducible condition to realize device performance improvements, while A2PbI4 as a passivator yields a much narrower processing window. We expect these results to enable a more rational route for developing AX for perovskite.
The surface of a three-dimensional topological insulator (TI) hosts two-dimensional massless Dirac fermions (DFs), the gapless and spin-helical nature of which yields many exotic phenomena, such as the immunity of topological surface states (TSS) to back-scattering. This leads to their high transmission through surface defects or potential barriers. Quantum corrals, previously elaborated on metal surfaces, can act as nanometer-sized electronic resonators to trap Schrödinger electrons by quantum confinement. It is thus intriguing, concerning their peculiar nature, to put the Dirac electrons of TSS to the test in similar circumstances. Here, we report the behaviors of TSS in a triangular quantum corral (TQC) fabricated by epitaxially growing Bi bilayer nanostructures on the surfaces of Bi2Te3 films. Unlike a circular corral, the TQC is supposed to be totally transparent for DFs. By mapping the electronic structure of TSS inside TQCs through a low-temperature scanning tunneling microscope in the real space, both the trapping and de-trapping behaviors of the TSS electrons are observed. The selection rules are found to be governed by the geometry and spin texture of the constant energy contour of TSS upon the strong hexagonal warping in Bi2Te3. Careful analysis of the quantum interference patterns of quasi-bound states yields the corresponding wave vectors of trapped TSS, through which two trapping mechanisms favoring momenta in different directions are uncovered. Our work indicates the extended nature of TSS and elucidates the selection rules of the trapping of TSS in the presence of a complicated surface state structure, giving insights into the effective engineering of DFs in TIs.
Fine-grained image recognition is challenging because discriminative clues are usually fragmented, whether from a single image or multiple images. Despite their significant improvements, most existing methods still focus on the most discriminative parts from a single image, ignoring informative details in other regions and lacking consideration of clues from other associated images. In this paper, we analyze the difficulties of fine-grained image recognition from a new perspective and propose a transformer architecture with the peak suppression module and knowledge guidance module, which respects the diversification of discriminative features in a single image and the aggregation of discriminative clues among multiple images. Specifically, the peak suppression module first utilizes a linear projection to convert the input image into sequential tokens. It then blocks the token based on the attention response generated by the transformer encoder. This module penalizes the attention to the most discriminative parts in the feature learning process, therefore, enhancing the information exploitation of the neglected regions. The knowledge guidance module compares the image-based representation generated from the peak suppression module with the learnable knowledge embedding set to obtain the knowledge response coefficients. Afterwards, it formalizes the knowledge learning as a classification problem using response coefficients as the classification scores. Knowledge embeddings and image-based representations are updated during training so that the knowledge embedding includes discriminative clues for different images. Finally, we incorporate the acquired knowledge embeddings into the image-based representations as comprehensive representations, leading to significantly higher performance. Extensive evaluations on the six popular datasets demonstrate the advantage of the proposed method.
A simply structured distributed observer is described for estimating the state of a continuous-time, jointly observable, input-free, linear system whose sensed outputs are distributed across a time-varying network. It is explained how to design a gain $g$ in the observer so that their state estimation errors all converge exponentially fast to zero at a fixed, but arbitrarily chosen rate provided the network's graph is strongly connected for all time. A linear inequality for $g$ is provided when the network's graph is switching according to a switching signal with a dwell time or an average dwell time, respectively. It has also been shown the existence of $g$ when the stochastic matrix of the network's graph is chosen to be doubly stochastic under arbitrarily switching signals. This is accomplished by exploiting several well-known properties of invariant subspaces and properties of perturbed systems.
Emojis are a succinct form of language which can express concrete meanings, emotions, and intentions. Emojis also carry signals that can be used to better understand communicative intent. They have become a ubiquitous part of our daily lives, making them an important part of understanding user-generated content. The emoji prediction task aims at predicting the proper set of emojis associated with a piece of text. Through emoji prediction, models can learn rich representations of the communicative intent of the written text. While existing research on the emoji prediction task focus on a small subset of emoji types closely related to certain emotions, this setting oversimplifies the task and wastes the expressive power of emojis. In this paper, we extend the existing setting of the emoji prediction task to include a richer set of emojis and to allow multi-label classification on the task. We propose novel models for multi-class and multi-label emoji prediction based on Transformer networks. We also construct multiple emoji prediction datasets from Twitter using heuristics. The BERT models achieve state-of-the-art performances on all our datasets under all the settings, with relative improvements of 27.21% to 236.36% in accuracy, 2.01% to 88.28% in top-5 accuracy and 65.19% to 346.79% in F-1 score, compared to the prior state-of-the-art. Our results demonstrate the efficacy of deep Transformer-based models on the emoji prediction task. We also release our datasets at https://github.com/hikari-NYU/Emoji_Prediction_Datasets_MMS for future researchers.
Instagram has become a great venue for amateur and professional photographers alike to showcase their work. It has, in other words, democratized photography. Generally, photographers take thousands of photos in a session, from which they pick a few to showcase their work on Instagram. Photographers trying to build a reputation on Instagram have to strike a balance between maximizing their followers' engagement with their photos, while also maintaining their artistic style. We used transfer learning to adapt Xception, which is a model for object recognition trained on the ImageNet dataset, to the task of engagement prediction and utilized Gram matrices generated from VGG19, another object recognition model trained on ImageNet, for the task of style similarity measurement on photos posted on Instagram. Our models can be trained on individual Instagram accounts to create personalized engagement prediction and style similarity models. Once trained on their accounts, users can have new photos sorted based on predicted engagement and style similarity to their previous work, thus enabling them to upload photos that not only have the potential to maximize engagement from their followers but also maintain their style of photography. We trained and validated our models on several Instagram accounts, showing it to be adept at both tasks, also outperforming several baseline models and human annotators.
Recent emergence of two-dimensional (2D) crystalline superconductors has provided a promising platform to investigate novel quantum physics and potential applications. To reveal essential quantum phenomena therein, ultralow temperature transport investigation on high quality ultrathin superconducting films is critically required, although it has been quite challenging experimentally. Here we report a systematic transport study on the ultrathin crystalline PdTe2 films grown by molecular beam epitaxy (MBE). Interestingly, a new type of Ising superconductivity in 2D centrosymmetric materials is revealed by the detection of large in-plane critical field more than 7 times Pauli limit. Remarkably, in perpendicular magnetic field, we provide solid evidence of anomalous metallic state characterized by the resistance saturation at low temperatures with high quality filters. The robust superconductivity with intriguing quantum phenomena in the macro-size ambient-stable ultrathin PdTe2 films remains almost the same for 20 months, showing great potentials in electronic and spintronic applications.
The single-layer FeSe/SrTiO3 (FeSe/STO) films have attracted much attention because of their simple crystal structure, distinct electronic structure and record high superconducting transition temperature (Tc). The origin of the dramatic Tc enhancement in single-layer FeSe/STO films and the dichotomy of superconductivity between single-layer and multiple-layer FeSe/STO films are still under debate. Here we report a comprehensive high resolution angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy measurements on the electronic structure evolution with doping in single-layer and multiple-layer FeSe/STO films. We find that the single-layer FeSe/STO films have a distinct parent phase and a route of doping evolution to superconductivity that are fundamentally different from multiple-layer FeSe/STO films. The parent phase of the single-layer FeSe/STO films is insulating, and its doping evolution is very similar to that of doping a Mott insulator in cuprate superconductors. In multiple-layer FeSe/STO films, high-Tc superconductivity occurs by suppressing the nematic order in the parent compound with electron doping. The single-layer FeSe/STO films represent the first clear case in the iron-based superconductors that the parent compound is an insulator. Our observations of the unique parent state and doping evolution in the single-layer FeSe/STO films provide key insight in understanding its record high-Tc superconductivity. They also provide a new route of realizing superconductivity in iron-based superconductors that is common in high temperature cuprate superconductors.
A distributed algorithm is described for finding a common fixed point of a family of $m>1$ nonlinear maps $M_i : \mathbb{R}^n \rightarrow \mathbb{R}^n$ assuming that each map is a paracontraction and that such a common fixed point exists. The common fixed point is simultaneously computed by $m$ agents assuming each agent $i$ knows only $M_i$, the current estimates of the fixed point generated by its neighbors, and nothing more. Each agent recursively updates its estimate of the fixed point by utilizing the current estimates generated by each of its neighbors. Neighbor relations are characterized by a time-dependent directed graph $\mathbb{N}(t)$ whose vertices correspond to agents and whose arcs depict neighbor relations. It is shown that for any family of paracontractions $M_i, i \in \{1,2,\ldots,m\}$ which has at least one common fixed point, and any sequence of strongly connected neighbor graphs $\mathbb{N}(t)$, $t=1,2,\ldots$, the algorithm causes all agent estimates to converge to a common fixed point.
By means of low-temperature scanning tunneling microscopy, we report on the electronic structures of BiO and SrO planes of Bi2Sr2CuO6+δ (Bi-2201) superconductor prepared by argon-ion bombardment and annealing. Depending on post annealing conditions, the BiO planes exhibit either pseudogap (PG) with sharp coherence peaks and an anomalously large gap of 49 meV or van Hove singularity (VHS) near the Fermi level, while the SrO is always characteristic of a PG-like feature. This contrasts with Bi2Sr2CaCu2O8+δ (Bi-2212) superconductor where VHS occurs solely on the SrO plane. We disclose the interstitial oxygen dopants (δ in the formulas) as a primary cause for the occurrence of VHS, which are located dominantly around the BiO and SrO planes, respectively, in Bi-2201 and Bi-2212. This is supported by the contrasting structural buckling amplitude of BiO and SrO planes in the two superconductors. Our findings provide solid evidence for the irrelevance of PG to the superconductivity in the two superconductors, as well as insights into why Bi-2212 can achieve a higher superconducting transition temperature than Bi-2201, and by implication, the mechanism of cuprate superconductivity.
We report on the observation of high-temperature ($T_\textrm{c}$) superconductivity and magnetic vortices in single-unit-cell FeSe films on anatase TiO$_2$(001) substrate by using scanning tunneling microscopy. A systematic study and engineering of interfacial properties has clarified the essential roles of substrate in realizing the high-$T_\textrm{c}$ superconductivity, probably via interface-induced electron-phonon coupling enhancement and charge transfer. By visualizing and tuning the oxygen vacancies at the interface, we find their very limited effect on the superconductivity, which excludes interfacial oxygen vacancies as the primary source for charge transfer between the substrate and FeSe films. Our findings have placed severe constraints on any microscopic model for the high-$T_\textrm{c}$ superconductivity in FeSe-related heterostructures.
Organometal halide perovskite has emerged as a promising material for solar cells and optoelectronics. Although the long diffusion length of photo-generated carriers is believed to be a critical factor responsible for the material's high efficiency in solar cells, a direct study of carrier transport over long distances in organometal halide perovskites is still lacking. We fabricated highly oriented crystalline CH$_3$NH$_3$PbI$_3$ (MAPbI$_3$) thin film lateral transport devices with long channel length (~ 120 $μ$m). By performing spatially scanned photocurrent imaging measurements with local illumination, we directly show that the perovskite films prepared here have very long transport lengths for photo-generated carriers, with a minority carrier (electron) diffusion length on the order of 10 $μ$m. Our approach of applying scanning photocurrent microscopy to organometal halide perovskites may be further used to elucidate the carrier transport processes and vastly different carrier diffusion lengths (~ 100 nm to 100 $μ$m) in different types of organometal halide perovskites.
Cuprate high temperature superconductors consist of two quasi-two-dimensional (2D) substructures: CuO2 superconducting layers and charge reservoir layers. The superconductivity is realized by charge transfer from the charge reservoir layers into the superconducting layers without chemical dopants and defects being introduced into the latter, similar to modulation-doping in semiconductor superlattices of AlGaAs/GaAs. Inspired by this scheme, we have been searching for high temperature superconductivity in ultrathin films of superconductors epitaxially grown on semiconductor/oxide substrates since 2008. We have observed interface enhanced superconductivity in both conventional and unconventional superconducting films, including single atomic layer films of Pb and In on Si substrates and single unit cell (UC) films of FeSe on SrTiO3 (STO) substrates. The discovery of high temperature superconductivity with a superconducting gap of ~20 meV in 1UC-FeSe/STO has stimulated tremendous interest in superconductivity community, for it opens new avenue for both raising superconducting transition temperature and understanding the pairing mechanism of unconventional high temperature superconductivity. Here, we review mainly the experimental progress on interface enhanced superconductivity in the three systems mentioned above with emphasis on 1UC-FeSe/STO, studied by scanning tunneling microscopy/spectroscopy, angle-resolved photoemission spectroscopy and transport experiments. We discuss the roles of interfaces and possible pairing mechanism inferred from those studies.
We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on STO(110) substrate by molecular beam epitaxy. By in-situ scanning tunneling spectroscopy measurement, we observed a superconducting gap as large as 17 meV. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset TC of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that the TC can be further increased by an external electric field, but the effect is smaller than that on STO(001) substrate. The study points out the important roles of interface related charge transfer and electron-phonon coupling in the high temperature superconductivity of FeSe/STO.
The pairing mechanism of high-temperature superconductivity in cuprates remains the biggest unresolved mystery in condensed matter physics. To solve the problem, one of the most effective approaches is to investigate directly the superconducting CuO2 layers. Here, by growing CuO2 monolayer films on Bi2Sr2CaCu2O8+δ substrates, we identify two distinct and spatially separated energy gaps centered at the Fermi energy, a smaller U-like gap and a larger V-like gap on the films, and study their interactions with alien atoms by low-temperature scanning tunneling microscopy. The newly discovered U-like gap exhibits strong phase coherence and is immune to scattering by K, Cs and Ag atoms, suggesting its nature as a nodeless superconducting gap in the CuO2 layers, whereas the V-like gap agrees with the well-known pseudogap state in the underdoped regime. Our results support an s-wave superconductivity in Bi2Sr2CaCu2O8+δ, which, we propose, originates from the modulation-doping resultant two-dimensional hole liquid confined in the CuO2 layers.
We report on the emergence of two disconnected superconducting domes in alkali-metal potassium (K)-doped FeSe ultra-thin films grown on graphitized SiC(0001). The superconductivity exhibits hypersensitivity to K dosage in the lower-Tc dome, whereas in the heavily electron-doped higher-Tc dome it becomes spatially homogeneous and robust against disorder, supportive of a conventional Cooper-pairing mechanism. Furthermore, the heavily K-doped multilayer FeSe films all reveal a large superconducting gap of ~ 14 meV, irrespective of film thickness, verifying the higher-Tc superconductivity only in the topmost FeSe layer. The unusual finding of a double-dome superconducting phase has stepped towards the mechanistic understanding of superconductivity in FeSe-derived superconductors.
The significant role of interfacial coupling on the superconductivity enhancement in FeSe films on SrTiO3 has been widely recognized. But the explicit origination of this coupling is yet to be identified. Here by surface phonon measurements using high resolution electron energy loss spectroscopy, we found electric field generated by Fuchs-Kliewer (F-K) phonon modes of SrTiO3 can penetrate into FeSe films and strongly interact with electrons therein. The mode-specific electron-phonon coupling (EPC) constant for the ~92 meV F-K phonon is ~0.25 in the single-layer FeSe on SrTiO3. With increasing FeSe thickness, the penetrating field intensity decays exponentially, which matches well the observed exponential decay of the superconducting gap. It is unambiguously shown that the SrTiO3 F-K phonon penetrating into FeSe is essential in the interfacial superconductivity enhancement.
We study the magnetic response of superconducting $γ$-Ga via low temperature scanning tunneling microscopy and spectroscopy. The magnetic vortex cores rely substantially on the Ga geometry, and exhibit an unexpectedly-large axial elongation with aspect ratio up to 40 in rectangular Ga nano-strips (width $l$ $<$ 100 nm). This is in stark contrast with the isotropic circular vortex core in a larger round-shaped Ga island. We suggest that the unusual elongated vortices in Ga nanostrips originate from geometric confinement effect probably via the strong repulsive interaction between the vortices and Meissner screening currents at the sample edge. Our finding provides novel conceptual insights into the geometrical confinement effect on magnetic vortices and forms the basis for the technological applications of superconductors.
Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe films on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. By combined in-situ scanning tunneling microscopy/spectroscopy (STM/STS) and ex-situ scanning transmission electron microscopy (STEM) studies, we report on atomically resolved structure including both lattice constants and actual atomic positions of the FeSe/STO interface under both non-superconducting and superconducting states. We observed TiO2 double layers (DLs) and significant atomic displacements in the top two layers of STO, lattice compression of the Se-Fe-Se triple layer, and relative shift between bottom Se and topmost Ti atoms. By imaging the interface structures under various superconducting states, we unveil a close correlation between interface structure and superconductivity. Our atomic-scale identification of FeSe/STO interface structure provides useful information on investigating the pairing mechanism of this interface-enhanced high-temperature superconducting system.
The recent observation of superconducting state at atomic scale has motivated the pursuit of exotic condensed phases in two-dimensional (2D) systems. Here we report on a superconducting phase in two-monolayer crystalline Ga films epitaxially grown on wide band-gap semiconductor GaN(0001). This phase exhibits a hexagonal structure and only 0.552 nm in thickness, nevertheless, brings about a superconducting transition temperature Tc as high as 5.4 K, confirmed by in situ scanning tunneling spectroscopy, and ex situ electrical magneto-transport and magnetization measurements. The anisotropy of critical magnetic field and Berezinski-Kosterlitz-Thouless-like transition are observed, typical for the 2D superconductivity. Our results demonstrate a novel platform for exploring atomic-scale 2D superconductor, with great potential for understanding of the interface superconductivity.
We report transport studies on (Bi,Sb)2Te3 topological insulator thin films with tunable electronic band structure. We find a doping and temperature regime in which the Hall coefficient is negative indicative of electron-type carriers, whereas the Seebeck coefficient is positive indicative of hole-type carriers. This sign anomaly is due to the distinct transport behaviors of the bulk and surface states: the surface Dirac fermions dominate magnetoelectric transport while the thermoelectric effect is mainly determined by the bulk states. These findings may inspire new ideas for designing topological insulator-based high efficiency thermoelectric devices.
Alkali-metal (potassium) adsorption on FeSe thin films with thickness from two unit cells (UC) to 4-UC on SrTiO3 grown by molecular beam epitaxy is investigated with a low-temperature scanning tunneling microscope. At appropriate potassium coverage (0.2-0.3 monolayer), the tunneling spectra of the films all exhibit a superconducting-like gap larger than 11 meV (five times the gap value of bulk FeSe), and two distinct features of characteristic phonon modes at 11 meV and 21 meV. The results reveal the critical role of the interface enhanced electron-phonon coupling for possible high temperature superconductivity in the system and is consistent with recent theories. Our study provides compelling evidence for the conventional pairing mechanism for this type of heterostructure superconducting systems.
Understanding the mechanism of high transition temperature (Tc) superconductivity in cuprates has been hindered by the apparent complexity of their multilayered crystal structure. Using a cryogenic scanning tunneling microscopy, we report on layer-by-layer probing of the electronic structures of all ingredient planes (BiO, SrO, CuO2) of Bi2Sr2CaCu2O8+δ superconductor prepared by argon-ion bombardment and annealing technique. We show that the well-known pseudogap (PG) feature observed by STM is inherently a property of the BiO planes and thus irrelevant directly to Cooper pairing. The SrO planes exhibit an unexpected Van Hove singularity near the Fermi level, while the CuO2 planes are exclusively characterized by a smaller gap inside the PG. The small gap becomes invisible near Tc, which we identify as the superconducting gap. The above results constitute severe constraints on any microscopic model for high Tc superconductivity in cuprates.
Molecular beam epitaxy is used to grow TiSe2 ultrathin films on graphitized SiC(0001) substrate. TiSe2films proceed via a nearly layer-by-layer growth mode and exhibit two dominant types of defects, identified as Se vacancy and interstitial, respectively. By means of scanning tunneling microscopy, we demonstrate that the well-established charge density waves can survive in single unit-cell (one triple layer) regime, and find a gradual reduction in their correlation length as the density of surface defects in TiSe2 ultrathin films increases. Our findings offer important insights into the nature of charge density wave in TiSe2, and also pave a material foundation for potential applications based on the collective electronic states.
The stoichiometric "111" iron-based superconductor, LiFeAs, has attacted great research interest in recent years. For the first time, we have successfully grown LiFeAs thin film by molecular beam epitaxy (MBE) on SrTiO3(001) substrate, and studied the interfacial growth behavior by reflection high energy electron diffraction (RHEED) and low-temperature scanning tunneling microscope (LT-STM). The effects of substrate temperature and Li/Fe flux ratio were investigated. Uniform LiFeAs film as thin as 3 quintuple-layer (QL) is formed. Superconducting gap appears in LiFeAs films thicker than 4 QL at 4.7 K. When the film is thicker than 13 QL, the superconducting gap determined by the distance between coherence peaks is about 7 meV, close to the value of bulk material. The ex situ transport measurement of thick LiFeAs film shows a sharp superconducting transition around 16 K. The upper critical field, Hc2(0)=13.0 T, is estimated from the temperature dependent magnetoresistance. The precise thickness and quality control of LiFeAs film paves the road of growing similar ultrathin iron arsenide films.
It is meaningful to detect outliers in traffic data for traffic management. However, this is a massive task for people from large-scale database to distinguish outliers. In this paper, we present two methods: Kernel Smoothing Naïve Bayes (NB) method and Gaussian Mixture Model (GMM) method to automatically detect any hardware errors as well as abnormal traffic events in traffic data collected at a four-arm junction in Hong Kong. Traffic data was recorded in a video format, and converted to spatial-temporal (ST) traffic signals by statistics. The ST signals are then projected to a two-dimensional (2D) (x,y)-coordinate plane by Principal Component Analysis (PCA) for dimension reduction. We assume that inlier data are normal distributed. As such, the NB and GMM methods are successfully applied in outlier detection (OD) for traffic data. The kernel smooth NB method assumes the existence of kernel distributions in traffic data and uses Bayes' Theorem to perform OD. In contrast, the GMM method believes the traffic data is formed by the mixture of Gaussian distributions and exploits confidence region for OD. This paper would address the modeling of each method and evaluate their respective performances. Experimental results show that the NB algorithm with Triangle kernel and GMM method achieve up to 93.78% and 94.50% accuracies, respectively.
Scanning tunneling microscopy and spectroscopy have been used to investigate the femtosecond dynamics of Dirac fermions in the topological insulator Bi$_2$Se$_3$ ultrathin films. At two-dimensional limit, bulk electrons becomes quantized and the quantization can be controlled by film thickness at single quintuple layer level. By studying the spatial decay of standing waves (quasiparticle interference patterns) off steps, we measure directly the energy and film thickness dependence of phase relaxation length $l_ϕ$ and inelastic scattering lifetime $τ$ of topological surface-state electrons. We find that $τ$ exhibits a remarkable $(E-E_F)^{-2}$ energy dependence and increases with film thickness. We show that the features revealed are typical for electron-electron scattering between surface and bulk states.
This article is concerned with the spectral behavior of $p$-dimensional linear processes in the moderately high-dimensional case when both dimensionality $p$ and sample size $n$ tend to infinity so that $p/n\to0$. It is shown that, under an appropriate set of assumptions, the empirical spectral distributions of the renormalized and symmetrized sample autocovariance matrices converge almost surely to a nonrandom limit distribution supported on the real line. The key assumption is that the linear process is driven by a sequence of $p$-dimensional real or complex random vectors with i.i.d. entries possessing zero mean, unit variance and finite fourth moments, and that the $p\times p$ linear process coefficient matrices are Hermitian and simultaneously diagonalizable. Several relaxations of these assumptions are discussed. The results put forth in this paper can help facilitate inference on model parameters, model diagnostics and prediction of future values of the linear process.
We report the superconductivity evolution of one unit cell (1-UC) and 2-UC FeSe films on SrTiO3(001) substrates with potassium (K) adsorption. By in situ scanning tunneling spectroscopy measurement, we find that the superconductivity in 1-UC FeSe films is continuously suppressed with increasing K coverage, whereas non-superconducting 2-UC FeSe films become superconducting with a gap of ~17 meV or ~11 meV depending on whether the underlying 1-UC films are superconducting or not. This work explicitly reveals that the interface electron-phonon coupling is strongly related to the charge transfer at FeSe/STO interface and plays vital role in enhancing Cooper pairing in both 1-UC and 2-UC FeSe films.
Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe film on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. Here, by ex situ transport measurements, we report on the superconductivity in FeSe ultra-thin films with different thickness on STO substrate. We find that the onset superconducting transition temperature (Tc) decreases with increasing film thickness of FeSe, which is opposite to the behavior usually observed in traditional superconductor films. By systematic post-annealing of 5 UC FeSe films, we observe an insulator to superconductor transition, which is accompanied with a sign change of the dominated charge carriers from holes to electrons at low temperatures according to the corresponding Hall measurement.
The recent observation of high-temperature superconductivity in one unit cell thick FeSe on SrTiO3 (1UC FeSe/STO)1 initiated a new pathway to realizing even higher transition temperature (Tc) superconductors and established a promising different paradigm to understand the mechanism of high temperature superconductivity2-10. However, independent confirmation on the high Tc value, the role of capping layer in reducing Tc, and the underlying mechanism of the novel superconductivity remain open questions11. Here we report a time-resolved study of the excited state ultrafast dynamics of 1UC FeSe/STO protected by 2UC FeTe capping layer, and identify the superconducting Tc to be 68 (-5/+2) K. We found a coherent acoustic phonon mode in the capping layer, which provides an additional decay channel to the gluing bosons and explains the reduced Tc value. Our investigation supports the phonon pairing scenario.
Charge ordering is one of the most intriguing and extensively studied phenomena in correlated electronic materials because of its strong impact on electron transport properties including superconductivity. Despite its ubiquitousness in correlated systems, the occurrence of charge ordering in iron-based superconductors is still unresolved. Here we use scanning tunneling microscopy to reveal a long-range charge-stripe order and a highly anisotropic dispersion of electronic states in the ground state of stoichiometric FeTe, the parent compound of the Fe(Te, Se, S) superconductor family. The formation of charge order in a strongly correlated electron system with integer nominal valence (here Fe$^{2+}$) is unexpected and suggests that the iron-based superconductors may exhibit more complex charge dynamics than originally expected. We show that the present observations can be attributed to the surpassing of the role of local Coulomb interaction by the poorly screened longer-range Coulomb interactions, facilitated by large Hund's rule coupling.
The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report our comparative study between the single-layer and double-layer FeSe/SrTiO3 films by performing a systematic angle-resolved photoemission study on the samples annealed in vacuum. We find that, like the single-layer FeSe/SrTiO3 film, the as-prepared double-layer FeSe/SrTiO3 film is insulating and possibly magnetic, thus establishing a universal existence of the magnetic phase in the FeSe/SrTiO3 films. In particular, the double-layer FeSe/SrTiO3 film shows a quite different doping behavior from the single-layer film in that it is hard to get doped and remains in the insulating state under an extensive annealing condition. The difference originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the origin of superconductivity and the doping mechanism in the FeSe/SrTiO3 films. The property disparity between the single-layer and double-layer FeSe/SrTiO3 films may facilitate to fabricate electronic devices by making superconducting and insulating components on the same substrate under the same condition.
Since the discovery of topological insulators (TIs)1,2, the peculiar nature of their chiral surface states has been experimentally demonstrated both in bulk and in film materials with open boundaries3,4. Closed boundary on a TI surface may intrigue more interesting phenomena such as quantum confinement of massless Dirac fermions (DFs), which is analogous to the quantum corral (QC) for massive free electrons on a metal surface5-10. To date, it keeps a highly stringent challenge to realize a true Dirac QC due to the unusual transmitting power of a massless fermion. Through heteroepitaxially growing a Bi bilayer on the Bi2Te3 surface with appropriate coverage, here we demonstrate the realization of a true Dirac QC. Specifically, spectacular maps of quantum interference in equilateral triangle-shaped QCs surrounded by Bi bilayers are directly visualized by using a low-temperature scanning tunneling microscope. The present success is ascribed to a perfect orientation matching between the QC boundary and the stationary-phase scattering of massless DFs. In addition, the quasiparticle lifetime of the confined DFs is also systematically measured and analyzed.
The Dirac-like surface states of the topological insulators (TIs) are protected by time reversal symmetry (TRS) and exhibit a host of novel properties. Introducing magnetism into TI, which breaks the TRS, is expected to create exotic topological magnetoelectric effects. A particularly intriguing phenomenon in this case is the magnetic field dependence of electrical resistance, or magnetoresistance (MR). The intricate interplay between topological protection and broken-TRS may lead to highly unconventional MR behaviour that can find unique applications in magnetic sensing and data storage. However, so far the MR of TI with spontaneously broken TRS is still poorly understood, mainly due to the lack of well-controlled experiments. In this work, we investigate the magneto transport properties of a ferromagnetic TI thin film fabricated into a field effect transistor device. We observe an unusually complex evolution of MR when the Fermi level (EF) is tuned across the Dirac point (DP) by gate voltage. In particular, MR tends to be positive when EF lies close to the DP but becomes negative at higher energies. This trend is opposite to that expected from the Berry phase picture for localization, but is intimately correlated with the gate-tuned magnetic order. We show that the underlying physics is the competition between the topology-induced weak antilocalization and magnetism-induced negative MR. The simultaneous electrical control of magnetic order and magneto transport facilitates future TI-based spintronic devices.
In high temperature cuprate superconductors, it is now generally agreed that the parent compound is a Mott insulator and superconductivity is realized by doping the antiferromagnetic Mott insulator. In the iron-based superconductors, however, the parent compound is mostly antiferromagnetic metal, raising a debate on whether an appropriate starting point should go with an itinerant picture or a localized picture. It has been proposed theoretically that the parent compound of the iron-based superconductors may be on the verge of a Mott insulator, but so far no clear experimental evidence of doping-induced Mott transition has been available. Here we report an electronic evidence of an insulator-superconductor transition observed in the single-layer FeSe films grown on the SrTiO3 substrate. By taking angle-resolved photoemission measurements on the electronic structure and energy gap, we have identified a clear evolution of an insulator to a superconductor with the increasing doping. This observation represents the first example of an insulator-superconductor transition via doping observed in the iron-based superconductors. It indicates that the parent compound of the iron-based superconductors is in proximity of a Mott insulator and strong electron correlation should be considered in describing the iron-based superconductors.
The surface of a topological crystalline insulator (TCI) carries an even number of Dirac cones protected by crystalline symmetry. We epitaxially grew high quality Pb$_{1-x}$Sn$_x$Te(111) films and investigated the TCI phase by in-situ angle-resolved photoemission spectroscopy. Pb$_{1-x}$Sn$_x$Te(111) films undergo a topological phase transition from trivial insulator to TCI via increasing the Sn/Pb ratio, accompanied by a crossover from n-type to p-type doping. In addition, a hybridization gap is opened in the surface states when the thickness of film is reduced to the two-dimensional limit. The work demonstrates an approach to manipulating the topological properties of TCI, which is of importance for future fundamental research and applications based on TCI.
Graded index microstructured polymer optical fiber incorporating a specially designed air-hole array featuring variable air-hole diameters and inter-hole separation is proposed, fabricated and characterized in view of the fiber potential applications in low-loss, low-dispersion terahertz guidance. The proposed fiber features simultaneously low chromatic and intermodal dispersions, as well as low loss in the terahertz spectral range. We then experimentally demonstrate that proposed fibers exhibit smaller pulse distortion, larger bandwidth and more reliable excitation when compared to the porous fibers of comparable geometry.
Interface enhanced superconductivity at two dimensional limit has become one of most intriguing research directions in condensed matter physics. Here, we report the superconducting properties of ultra-thin FeSe films with the thickness of one unit cell (1-UC) grown on conductive and insulating SrTiO3 (STO) substrates. For the 1-UC FeSe on conductive STO substrate (Nb-STO), the magnetization versus temperature (M-T) measurement shows a diamagnetic signal at 85 K, suggesting the possibility of superconductivity appears at this high temperature. For the FeSe films on insulating STO substrate, systematic transport measurements were carried out and the sheet resistance of FeSe films exhibits Arrhenius TAFF behavior with a crossover from a single-vortex pinning region to a collective creep region. More intriguing, sign reversal of Hall resistance with temperature is observed, demonstrating a crossover from hole conduction to electron conduction above Tc in 1-UC FeSe films.
Scanning tunneling spectroscopy has been used to reveal signatures of a bosonic mode in the local quasiparticle density of states of superconducting FeSe films. The mode appears below Tc as a 'dip-hump' feature at energy Ω~ 4.7 kBTc beyond the superconducting gap Δ. Spectra on strained regions of the FeSe films reveal simultaneous decreases in Δand Ω. This contrasts with all previous reports on other high-Tc superconductors, where Δlocally anti-correlates with Ω. A local strong coupling model is found to reconcile the discrepancy well, and to provide a unified picture of the electron-boson coupling in unconventional superconductors.
Heterostructure based interface engineering has been proved an effective method for finding new superconducting systems and raising superconductivity transition temperature (TC). In previous work on one unit-cell (UC) thick FeSe films on SrTiO3 (STO) substrate, a superconducting-like energy gap as large as 20 meV, was revealed by in situ scanning tunneling microscopy/spectroscopy (STM/STS). Angle resolved photoemission spectroscopy (ARPES) further revealed a nearly isotropic gap of above 15 meV, which closes at a temperature of ~ 65 K. If this transition is indeed the superconducting transition, then the 1-UC FeSe represents the thinnest high TC superconductor discovered so far. However, up to date direct transport measurement of the 1-UC FeSe films has not been reported, mainly because growth of large scale 1-UC FeSe films is challenging and the 1-UC FeSe films are too thin to survive in atmosphere. In this work, we successfully prepared 1-UC FeSe films on insulating STO substrates with non-superconducting FeTe protection layers. By direct transport and magnetic measurements, we provide definitive evidence for high temperature superconductivity in the 1-UC FeSe films with an onset TC above 40 K and a extremely large critical current density JC ~ 1.7*106 A/cm2 at 2 K. Our work may pave the way to enhancing and tailoring superconductivity by interface engineering.
We are concerned with the behavior of the eigenvalues of renormalized sample covariance matrices of the form C_n=\sqrt{\frac{n}{p}}\left(\frac{1}{n}A_{p}^{1/2}X_{n}B_{n}X_{n}^{*}A_{p}^{1/2}-\frac{1}{n}\tr(B_{n})A_{p}\right) as $p,n\to \infty$ and $p/n\to 0$, where $X_{n}$ is a $p\times n$ matrix with i.i.d. real or complex valued entries $X_{ij}$ satisfying $E(X_{ij})=0$, $E|X_{ij}|^2=1$ and having finite fourth moment. $A_{p}^{1/2}$ is a square-root of the nonnegative definite Hermitian matrix $A_{p}$, and $B_{n}$ is an $n\times n$ nonnegative definite Hermitian matrix. We show that the empirical spectral distribution (ESD) of $C_n$ converges a.s. to a nonrandom limiting distribution under some assumptions. The probability density function of the LSD of $C_{n}$ is derived and it is shown that it depends on the LSD of $A_{p}$ and the limiting value of $n^{-1}\tr(B_{n}^2)$. We propose a computational algorithm for evaluating this limiting density when the LSD of $A_{p}$ is a mixture of point masses. In addition, when the entries of $X_{n}$ are sub-Gaussian, we derive the limiting empirical distribution of $\{\sqrt{n/p}(λ_j(S_n) - n^{-1}\tr(B_n) λ_j(A_{p}))\}_{j=1}^p$ where $S_n := n^{-1} A_{p}^{1/2}X_{n}B_{n}X_{n}^{*}A_{p}^{1/2}$ is the sample covariance matrix and $λ_j$ denotes the $j$-th largest eigenvalue, when $F^A$ is a finite mixture of point masses. These results are utilized to propose a test for the covariance structure of the data where the null hypothesis is that the joint covariance matrix is of the form $A_{p} \otimes B_n$ for $\otimes$ denoting the Kronecker product, as well as $A_{p}$ and the first two spectral moments of $B_n$ are specified. The performance of this test is illustrated through a simulation study.
We introduce time-reversal-symmetry breaking by doping Cr atoms into the topmost quintuple layer or into the bulk of Sb2Te3 thin films. We find that even at a high Cr-doping level the Landau level spectrum keeps a good quality, enabling the first demonstration of deviation of the zero-mode Landau level, induced by the acquisition of a mass term in the surface states in the presence of surface or bulk magnetic doping. The magnitude of the mass term in the surface states increases with increasing Cr-doping level. Our observation suggests Cr-doped Sb2Te3 is a promising candidate for the realization of the proposed novel magnetoelectric effects.
The latest discovery of high temperature superconductivity signature in single-layer FeSe is significant because it is possible to break the superconducting critical temperature ceiling (maximum Tc~55 K) that has been stagnant since the discovery of Fe-based superconductivity in 2008. It also blows the superconductivity community by surprise because such a high Tc is unexpected in FeSe system with the bulk FeSe exhibiting a Tc at only 8 K at ambient pressure which can be enhanced to 38 K under high pressure. The Tc is still unusually high even considering the newly-discovered intercalated FeSe system A_xFe_{2-y}Se_2 (A=K, Cs, Rb and Tl) with a Tc at 32 K at ambient pressure and possible Tc near 48 K under high pressure. Particularly interesting is that such a high temperature superconductivity occurs in a single-layer FeSe system that is considered as a key building block of the Fe-based superconductors. Understanding the origin of high temperature superconductivity in such a strictly two-dimensional FeSe system is crucial to understanding the superconductivity mechanism in Fe-based superconductors in particular, and providing key insights on how to achieve high temperature superconductivity in general. Here we report distinct electronic structure associated with the single-layer FeSe superconductor. Its Fermi surface topology is different from other Fe-based superconductors; it consists only of electron pockets near the zone corner without indication of any Fermi surface around the zone center. Our observation of large and nearly isotropic superconducting gap in this strictly two-dimensional system rules out existence of node in the superconducting gap. These results have provided an unambiguous case that such a unique electronic structure is favorable for realizing high temperature superconductivity.
Searching for superconducting materials with high transition temperature (TC) is one of the most exciting and challenging fields in physics and materials science. Although superconductivity has been discovered for more than 100 years, the copper oxides are so far the only materials with TC above 77 K, the liquid nitrogen boiling point. Here we report an interface engineering method for dramatically raising the TC of superconducting films. We find that one unit-cell (UC) thick films of FeSe grown on SrTiO3 (STO) substrates by molecular beam epitaxy (MBE) show signatures of superconducting transition above 50 K by transport measurement. A superconducting gap as large as 20 meV of the 1 UC films observed by scanning tunneling microcopy (STM) suggests that the superconductivity could occur above 77 K. The occurrence of superconductivity is further supported by the presence of superconducting vortices under magnetic field. Our work not only demonstrates a powerful way for finding new superconductors and for raising TC, but also provides a well-defined platform for systematic study of the mechanism of unconventional superconductivity by using different superconducting materials and substrates.
We elucidate the existing controversies in the newly discovered K-doped iron selenide (KxFe2-ySe2-z) superconductors. The stoichiometric KFe2Se2 with \surd2\times\surd2 charge ordering was identified as the parent compound of KxFe2-ySe2-z superconductor using scanning tunneling microscopy and spectroscopy. The superconductivity is induced in KFe2Se2 by either Se vacancies or interacting with the anti-ferromagnetic K2Fe4Se5 compound. Totally four phases were found to exist in KxFe2-ySe2-z: parent compound KFe2Se2, superconducting KFe2Se2 with \surd2\times\surd5 charge ordering, superconducting KFe2Se2-z with Se vacancies and insulating K2Fe4Se5 with \surd5\times\surd5 Fe vacancy order. The phase separation takes place at the mesoscopic scale under standard molecular beam epitaxy condition.
Superconductivity in the cuprate superconductors and the Fe-based superconductors is realized by doping the parent compound with charge carriers, or by application of high pressure, to suppress the antiferromagnetic state. Such a rich phase diagram is important in understanding superconductivity mechanism and other physics in the Cu- and Fe-based high temperature superconductors. In this paper, we report a phase diagram in the single-layer FeSe films grown on SrTiO3 substrate by an annealing procedure to tune the charge carrier concentration over a wide range. A dramatic change of the band structure and Fermi surface is observed, with two distinct phases identified that are competing during the annealing process. Superconductivity with a record high transition temperature (Tc) at ~65 K is realized by optimizing the annealing process. The wide tunability of the system across different phases, and its high-Tc, make the single-layer FeSe film ideal not only to investigate the superconductivity physics and mechanism, but also to study novel quantum phenomena and for potential applications.
We prepare single layer potassium-doped iron selenide (110) film by molecular beam expitaxy. Such a single layer film can be viewed as a two-dimensional system composed of weakly coupled two-leg iron ladders. Scanning tunneling spectroscopy reveals that superconductivity is developed in this two-leg ladder system. The superconducting gap is similar to that of the multi-layer films. However, the Fermi surface topology given by first-principles calculation is remarkably different from that of the bulk materials. Our results suggest that superconducting pairing is very short-ranged or takes place rather locally in iron-chalcogenides. The superconductivity is most likely driven by electron-electron correlation effect and is insensitive to the change of Fermi surfaces.
Low-temperature scanning tunneling microscopy and spectroscopy are employed to investigate twin boundaries in stoichiometric FeSe films grown by molecular beam epitaxy. Twin boundaries can be unambiguously identified by imaging the 90° change in the orientation of local electronic dimers from Fe site impurities on either side. Twin boundaries run at approximately 45° to the Fe-Fe bond directions, and noticeably suppress the superconducting gap, in contrast with the recent experimental and theoretical findings in other iron pnictides. Furthermore, vortices appear to accumulate on twin boundaries, consistent with the degraded superconductivity there. The variation in superconductivity is likely caused by the increased Se height in the vicinity of twin boundaries, providing the first local evidence for the importance of this height to the mechanism of superconductivity.
Three-dimensional (3D) topological insulators (TI) are novel quantum materials with insulating bulk and topologically protected metallic surfaces with Dirac-like band structure. The spin-helical Dirac surface states are expected to host exotic topological quantum effects and find applications in spintronics and quantum computation. The experimental realization of these ideas requires fabrication of versatile devices based on bulk-insulating TIs with tunable surface states. The main challenge facing the current TI materials exemplified by Bi2Se3 and Bi2Te3 is the significant bulk conduction, which remains unsolved despite extensive efforts involving nanostructuring, chemical doping and electrical gating. Here we report a novel approach for engineering the band structure of TIs by molecular beam epitaxy (MBE) growth of (Bi1-xSbx)2Te3 ternary compounds. Angle-resolved photoemission spectroscopy (ARPES) and transport measurements show that the topological surface states exist over the entire composition range of (Bi1-xSbx)2Te3 (x = 0 to 1), indicating the robustness of bulk Z2 topology. Most remarkably, the systematic band engineering leads to ideal TIs with truly insulating bulk and tunable surface state across the Dirac point that behave like one quarter of graphene. This work demonstrates a new route to achieving intrinsic quantum transport of the topological surface states and designing conceptually new TI devices with well-established semiconductor technology.
High-quality Sb2Te3 films are obtained by molecular beam epitaxy on graphene substrate and investigated by in situ scanning tunneling microscopy/spectroscopy. Intrinsic defects responsible for the natural p-type conductivity of Sb2Te3 are identified to be the Sb vacancies and SbTe antisites in agreement with first-principles calculations. By minimizing defect densities, coupled with a transfer doping by the graphene substrate, the Fermi level of Sb2Te3 thin films can be tuned over the entire range of the bulk band gap. This establishes the necessary condition to explore topological insulator behaviors near the Dirac point.
We report the experimental observation of Landau quantization of molecular beam epitaxy grown Sb2Te3 thin films by a low-temperature scanning tunneling microscope. Different from all the reported systems, the Landau quantization in Sb2Te3 topological insulator is not sensitive to the intrinsic substitutional defects in the films. As a result, a nearly perfect linear energy dispersion of surface states as 2D massless Dirac fermion system is achieved. We demonstrate that 4 quintuple layers are the thickness limit for Sb2Te3 thin film being a 3D topological insulator. The mechanism of the Landau level broadening is discussed in terms of enhanced quasiparticle lifetime.
Alkali-doped iron selenide is the latest member of high Tc superconductor family, and its peculiar characters have immediately attracted extensive attention. We prepared high-quality potassium-doped iron selenide (KxFe2-ySe2) thin films by molecular beam epitaxy and unambiguously demonstrated the existence of phase separation, which is currently under debate, in this material using scanning tunneling microscopy and spectroscopy. The stoichiometric superconducting phase KFe2Se2 contains no iron vacancies, while the insulating phase has a \surd5\times\surd5 vacancy order. The iron vacancies are shown always destructive to superconductivity in KFe2Se2. Our study on the subgap bound states induced by the iron vacancies further reveals a magnetically-related bipartite order in the superconducting phase. These findings not only solve the existing controversies in the atomic and electronic structures in KxFe2-ySe2, but also provide valuable information on understanding the superconductivity and its interplay with magnetism in iron-based superconductors.
This paper has been withdrawn by the author
The recent theoretical prediction and experimental realization of topological insulators (TI) has generated intense interest in this new state of quantum matter. The surface states of a three-dimensional (3D) TI such as Bi_2Te_3, Bi_2Se_3 and Sb_2Te_3 consist of a single massless Dirac cones. Crossing of the two surface state branches with opposite spins in the materials is fully protected by the time reversal (TR) symmetry at the Dirac points, which cannot be destroyed by any TR invariant perturbation. Recent advances in thin-film growth have permitted this unique two-dimensional electron system (2DES) to be probed by scanning tunneling microscopy (STM) and spectroscopy (STS). The intriguing TR symmetry protected topological states were revealed in STM experiments where the backscattering induced by non-magnetic impurities was forbidden. Here we report the Landau quantization of the topological surface states in Bi_2Se_3 in magnetic field by using STM/STS. The direct observation of the discrete Landau levels (LLs) strongly supports the 2D nature of the topological states and gives direct proof of the nondegenerate structure of LLs in TI. We demonstrate the linear dispersion of the massless Dirac fermions by the square-root dependence of LLs on magnetic field. The formation of LLs implies the high mobility of the 2DES, which has been predicted to lead to topological magneto-electric effect of the TI.
We report direct imaging of standing waves of the nontrivial surface states of topological insulator Bi$_2$Te$_3$ by using a low temperature scanning tunneling microscope. The interference fringes are caused by the scattering of the topological states off Ag impurities and step edges on the Bi$_2$Te$_3$(111) surface. By studying the voltage-dependent standing wave patterns, we determine the energy dispersion $E(k)$, which confirms the Dirac cone structure of the topological states. We further show that, very different from the conventional surface states, the backscattering of the topological states by nonmagnetic impurities is completely suppressed. The absence of backscattering is a spectacular manifestation of the time-reversal symmetry, which offers a direct proof of the topological nature of the surface states.