Researcher profile

Xiaoge Zeng

Xiaoge Zeng contributes to research discovery and scholarly infrastructure.

ResearcherAffiliation not importedOpen to collaborate

physics.optics quant-ph

Trust snapshot

Quick read

Trust 19 - Baseline

5works

0followers

2topics

4close collaborators

Actions

Decide how to stay connected

Follow researcher0

Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.

Building this graph slice

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2015arXiv

Add-drop filter based on dual photonic crystal nanobeam cavities in push-pull mode

We demonstrate an add-drop filter based on a dual photonic crystal nanobeam cavity system that emulates the operation of a traveling-wave resonator and drops light on resonance to a single output port. Realized on an advanced SOI CMOS (IBM 45nm SOI) chip without any foundry process modifications, the device shows 16dB extinction in through port and 1dB loss in drop port with a 3dB bandwidth of 64GHz. To the best of our knowledge, this is the first implementation of a four-port add-drop filter based on photonic crystal nanobeam cavities.

preprint2015arXiv

Quantum-correlated photon pairs generated in a commercial 45nm complementary metal-oxide semiconductor microelectronics chip

Correlated photon pairs are a fundamental building block of quantum photonic systems. While pair sources have previously been integrated on silicon chips built using customized photonics manufacturing processes, these often take advantage of only a small fraction of the established techniques for microelectronics fabrication and have yet to be integrated in a process which also supports electronics. Here we report the first demonstration of quantum-correlated photon pair generation in a device fabricated in an unmodified advanced (sub-100nm) complementary metal-oxide-semiconductor (CMOS) process, alongside millions of working transistors. The microring resonator photon pair source is formed in the transistor layer structure, with the resonator core formed by the silicon layer typically used for the transistor body. With ultra-low continuous-wave on-chip pump powers ranging from 5 $μ$W to 400 $μ$W, we demonstrate pair generation rates between 165 Hz and 332 kHz using >80% efficient WSi superconducting nanowire single photon detectors. Coincidences-to-accidentals ratios consistently exceeding 40 were measured with a maximum of 55. In the process of characterizing this source we also accurately predict pair generation rates from the results of classical four-wave mixing measurements. This proof-of-principle device demonstrates the potential of commercial CMOS microelectronics as an advanced quantum photonics platform with capability of large volume, pristine process control, and where state-of-the-art high-speed digital circuits could interact with quantum photonic circuits.

preprint2014arXiv

Photonic Crystal Microcavities in a Microelectronics 45nm SOI CMOS Technology

We demonstrate the first monolithically integrated linear photonic crystal microcavities in an advanced SOI CMOS microelectronics process (IBM 45nm 12SOI) with no in-foundry process modifications. The cavities were integrated into a standard microelectronics design flow meeting process design rules, and fabricated alongside transistors native to the process. We demonstrate both 1520nm wavelength and 1180nm cavity designs using different cavity implementations due to design rule constraints. For the 1520nm and 1180nm designs, loaded quality factors of 2,000 and 4,000 are measured, and intrinsic quality factors of 100,000 and 60,000 are extracted. We also demonstrate an evanescent coupling geometry which decouples the cavity and waveguide-coupling design.

preprint2014arXiv

Triply-resonant micro-optical parametric oscillators based on Kerr nonlinearity: nonlinear loss, unequal resonance-port couplings, and coupled-cavity implementations

We develop a theoretical model of triply-resonant optical parametric oscillators (OPOs) based on degenerate four-wave mixing (FWM) that includes physics and degrees of freedom relevant to microphotonic (on-chip) device implementations, including nonlinear loss, a general resonant mode field structure, and mode-selective coupling to external ports. The coupled mode theory model addresses the effect of two-photon absorption and free-carrier absorption on parametric gain and oscillation thresholds, and ultimately on the optimum design for an OPO. The model goes beyond a typical free-space cavity configuration by incorporating a full modal analysis that admits distributed modes with non-uniform field distribution, relevant to photonic microcavity systems on chip. This leads to a generalization of the concept of nonlinear figure of merit (NFOM) to a vector of coefficients. In addition, by considering unconstrained signal, pump and idler resonance coupling strengths to excitation ports, not usually available in simple cavity geometry, we show that the efficiency-maximizing design will have unequal external Q for the three resonances. We arrive at generalized formulas for OPO oscillation threshold that include nonlinear absorption and free carrier lifetime, and provide a normalized solution to the design problem in the presence of nonlinear loss in terms of optimum choice of coupling. Based on the results, we suggest a family of coupled-cavity systems to implement optimum FWM, where control of resonant wavelengths can be separated from optimizing nonlinear conversion efficiency, and where furthermore pump, signal, and idler coupling to bus waveguides can be controlled independently, using interferometric cavity supermode coupling as an example. Using the generalized NFOM, we address the efficiency of single and multi-cavity geometry, as well as standing and traveling wave excitation.

preprint2013arXiv

Ultra-low-loss CMOS-Compatible Waveguide Crossing Arrays Based on Multimode Bloch Waves and Imaginary Coupling

We experimentally demonstrate broadband waveguide crossing arrays showing ultra low loss down to $0.04\,$dB/crossing ($0.9\%$), matching theory, and crosstalk suppression over $35\,$dB, in a CMOS-compatible geometry. The principle of operation is the tailored excitation of a low-loss spatial Bloch wave formed by matching the periodicity of the crossing array to the difference in propagation constants of the 1$^\text{st}$- and 3$^\text{rd}$-order TE-like modes of a multimode silicon waveguide. Radiative scattering at the crossing points acts like a periodic imaginary-permittivity perturbation that couples two supermodes, which results in imaginary (radiative) propagation-constant splitting and gives rise to a low-loss, unidirectional breathing Bloch wave. This type of crossing array provides a robust implementation of a key component enabling dense photonic integration.