Source author record

Michael J. Thorpe

Michael J. Thorpe appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

physics.atom-ph physics.optics physics.chem-ph physics.ins-det

Catalog footprint

What is connected

7works

4topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2013arXiv

Absolute and relative stability of an optical frequency reference based on spectral hole burning in Eu$^{3+}$:Y$_2$SiO$_5$

We present and analyze four frequency measurements designed to characterize the performance of an optical frequency reference based on spectral hole burning in \EuYSO. The first frequency comparison, between a single unperturbed spectral hole and a hydrogen maser, demonstrates a fractional frequency drift rate of $5 \times 10^{-18}$ s$^{-1}$. Optical-frequency comparisons between a pattern of spectral holes, a Fabry-Pérot cavity, and an Al$^+$ optical atomic clock show a short-term fractional frequency stability of $1 \times10^{-15} τ^{-1/2}$ that averages down to $2.5^{+1.1}_{-0.5} \times 10^{-16}$ at $τ= 540~s$ (with linear frequency drift removed). Finally, spectral hole patterns in two different \EuYSO crystals located in the same cryogenic vessel are compared, yielding a short-term stability of $7 \times10^{-16} τ^{-1/2}$ that averages down to $5.5^{+1.8}_{-0.9} \times 10^{-17}$ at $τ= 204$~s (with quadratic frequency drift removed).

preprint2013arXiv

Shifts of optical frequency references based on spectral-hole burning in Eu:Y2SiO5

Several properties of Eu:Y2SiO5 spectral holes are measured, to assess the suitability of broad-band hole-patterns for use as laser-frequency references. We measure frequency shifts due to magnetic fields, side-features of neighboring spectral holes, and changing optical probe power. A precise calibration of a temperature insensitive point is also performed, where the temperature-induced frequency shift is canceled to first order by the pressure-induced shift from the crystal's helium-gas environment.

preprint2011arXiv

Field-test of a robust, portable, frequency-stable laser

We operate a frequency-stable laser in a non-laboratory environment where the test platform is a passenger vehicle. We measure the acceleration experienced by the laser and actively correct for it to achieve a system acceleration sensitivity of $Δf / f$ = $11(2) \times 10^{-12}$/g, $6(2) \times 10^{-12}$/g, and $4(1) \times 10^{-12}$/g for accelerations in three orthogonal directions at 1 Hz. The acceleration spectrum and laser performance are evaluated with the vehicle both stationary and moving. The laser linewidth in the stationary vehicle with engine idling is 1.7(1) Hz.

preprint2011arXiv

Frequency-stabilization to 6x10^-16 via spectral-hole burning

We demonstrate two-stage laser stabilization based on a combination of Fabry- Perot and spectral-hole burning techniques. The laser is first pre-stabilized by the Fabry-Perot cavity to a fractional-frequency stability of sigma_y(tau) < 10^-13. A pattern of spectral holes written in the absorption spectrum of Eu3+:Y2SiO5 serves to further stabilize the laser to sigma_y(tau) = 6x10^-16 for 2 s < tau < 8 s. Measurements characterizing the frequency sensitivity of Eu3+:Y2SiO5 spectral holes to environmental perturbations suggest that they can be more frequency stable than Fabry-Perot cavities.

preprint2010arXiv

Analysis of Trace Impurities in Semiconductor Gas via Cavity-Enhanced Direct Frequency Comb Spectroscopy

Cavity-enhanced direct frequency comb spectroscopy (CE-DFCS) has demonstrated powerful potential for trace gas detection based on its unique combination of high bandwidth, rapid data acquisition, high sensitivity, and high resolution, which is unavailable with conventional systems. However, previous demonstrations have been limited to proof-of-principle experiments or studies of fundamental laboratory science. Here we present the development of CE-DFCS towards an industrial application -- measuring impurities in arsine, an important process gas used in III-V semiconductor compound manufacturing. A strongly absorbing background gas with an extremely complex, congested, and broadband spectrum renders trace detection exceptionally difficult, but the capabilities of CE-DFCS overcome this challenge and make it possible to identify and quantify multiple spectral lines associated with water impurities. Further, frequency combs allow easy access to new spectral regions via efficient nonlinear optical processes. Here, we demonstrate detection of multiple potential impurities across 1.75-1.95 um (5710-5130 cm-1) with single-channel detection sensitivities of ~1 x 10-7 cm-1 Hz-1/2 in nitrogen and identify water doped in arsine with a sensitivity of ~1 x 10-6 cm-1 Hz-1/2.

preprint2009arXiv

Phase-stabilized, 1.5-W frequency comb at 2.8 to 4.8 micron

We present a high-power optical parametric oscillator-based frequency comb in the mid-infrared wavelength region using periodically poled lithium niobate. The system is synchronously pumped by a 10-W femtosecond Yb:fiber laser centered at 1.07 um and is singly resonant for the signal. The idler (signal) wavelength can be continuously tuned from 2.8 to 4.8 um (1.76 to 1.37 um) with a simultaneous bandwidth as high as 0.3 um and a maximum average idler output power of 1.50 W. We also demonstrate the performance of the stabilized comb by recording the heterodyne beat with a narrow-linewidth diode laser. This OPO is an ideal source for frequency comb spectroscopy in the mid-IR.

preprint2007arXiv

Human breath analysis via cavity-enhanced optical frequency comb spectroscopy

To date, researchers have identified over 1000 different compounds contained in human breath. These molecules have both endogenous and exogenous origins and provide information about physiological processes occurring in the body as well as environment-related ingestion or absorption of contaminants1,2. While the presence and concentration of many of these molecules are poorly understood, many 'biomarker' molecules have been correlated to specific diseases and metabolic processes. Such correlations can result in non-invasive methods of health screening for a wide variety of medical conditions. In this article we present human breath analysis using an optical-frequency-comb-based trace detection system with excellent performance in all criteria: detection sensitivity, ability to identify and distinguish a large number of biomarkers, and measurement time. We demonstrate a minimum detectable absorption of 8 x 10-10 cm-1, a spectral resolution of 800 MHz, and 200 nm of spectral coverage from 1.5 to 1.7 micron where strong and unique molecular fingerprints exist for many biomarkers. We present a series of breath measurements including stable isotope ratios of CO2, breath concentrations of CO, and the presence of trace concentrations of NH3 in high concentrations of H2O.