Paper detail

The discharge characteristics of the DUHOCAMIS with a high magnetic bottle-shaped field

For the purpose to produce high intensity, multiply charged metal ion beams, the DUHOCAMIS (dual hollow cathode ion source for metal ions) was derived from the hot cathode Penning ion source combined with the hollow cathode sputtering experiments in 2007. It was interesting to investigate the behavior of this discharge geometry in a stronger magnetic bottle-shaped field. So a new test bench for DUHOCAMIS with a high magnetic bottle-shaped field up to 0.6 T has been set up at Peking University, on which have been made primary experiments in connection with discharge characteristics of the source. The experiments with magnetic fields from 0.13 T to 0.52 T have shown that the magnetic flux densities are very sensitive to the discharge behavior: discharge curves and ion spectra. It has been found that the slope of discharge curves in a very wide range can be controlled by changing the magnetic field as well as regulated by adjusting cathode heating power. On the other hand, by comparison of discharge curves between dual hollow cathode discharge (DHCD) mode and PIG discharge mode, it was found a much stronger magnetic effect occurred on DHCD mode. In this paper, the new test bench with ion source structure is described in detail; and main experimental results are presented and discussed, including the effects of cathode heating power and magnetic flux density on discharge characteristics, also the ion spectra. The effects of the magnetic field on the source operating are emphasized, and a unique behavior of the DUHOCAMIS operating in the high magnetic field is expected and discussed especially.