Source author record

Shamim Sk

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

cond-mat.mtrl-sci cond-mat.str-el physics.ins-det

Catalog footprint

Research overview

7works

3topics

4close collaborators

Actions

Is this your work?

Open graph Browse papers

preprint2022arXiv

Density functional study of thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe $_{2}$ VAl at high temperature region

Here, we present the phonon calculations for thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe $_{2}$ VAl in the temperature range of $300-800$ K and compared with existing experiment. Phonon dispersion is computed using finite displacement method and supercell approach. The positive frequencies of all the phonon modes indicate the mechanical stability of the compound. The specific heat at constant volume and Helmholtz free energy are calculated under harmonic approximation, while calculation of thermal expansion is done under quasi-harmonic approximation. Lattice thermal conductivity ( $κ_{L}$ ) is calculated using first-principle anharmonic lattice dynamics calculations. The zero-point energy and Debye temperature are computed as $\sim$ 21 kJ/mol and 638 K, respectively. The calculated thermal expansions are found to be $\sim$ 6.3 $\times$ 10 $^{-6}$ K $^{-1}$ and $\sim$ 7.2 $\times$ 10 $^{-6}$ K $^{-1}$ at 300 and 800 K, respectively. A significant deviation between calculated ( $\sim$ 48.6 W/m-K) and experimental ( $\sim$ 22.8 W/m-K) values of $κ_{L}$ are observed at 300 K. But, as the temperature increases, the calculated and experimental $κ_{L}$ come closer with the corresponding values of $\sim$ 18.2 W/m-K and $\sim$ 11.0 W/m-K at 800. The possible reasons for the deviation of $κ_{L}$ are addressed. The temperature dependent of phonon lifetime is computed in order to understand the feature of $κ_{L}$ . Present study suggests that DFT based phononic calculations provide reasonably good explanations of available experimental phonon related properties of Fe $_{2}$ VAl in the high temperature range of $300-800$ K.

preprint2022arXiv

Thermoelectric properties of Fe $_{2}$ VAl at high temperature region: A combined experimental and theoretical study

Heusler type compounds have long been recognized as potential thermoelectric (TE) materials. Here, the experimentally observed TE properties of Fe $_{2}$ VAl are understood through electronic structure calculations in the temperature range of $300-800$ K. The observed value of $S$ is $\sim-$ 138 $μ$ V/K at 300 K. Then, the $|S|$ decreases with increase in temperature up to the highest temperature with the value of $\sim-$ 18 $μ$ V/K at 800 K. The negative sign of $S$ in the full temperature window signifies the dominating $n$ -type character of the compound. The temperature dependent of electrical conductivity, $σ$ (thermal conductivity, $κ$ ) exhibits the increasing (decreasing) trend with the values of $\sim$ 1.2 $\times$ 10 $^{5}$ $Ω^{-1}$ m $^{-1}$ ( $\sim$ 23.7 W/m-K) and $\sim$ 2.2 $\times$ 10 $^{5}$ $Ω^{-1}$ m $^{-1}$ ( $\sim$ 15.3 W/m-K) at 300 K and 800 K, respectively. In order to understand these transport properties, the DFT based semi-classical Boltzmann theory is used. The contributions of multi-band electron and hole pockets are found to be mainly responsible for the temperature dependent trend of these properties. The decrement of $|S|$ and increment of $σ/τ$ $\&$ $κ_{e}/τ$ ( $τ$ is relaxation time) with temperature is directly related with the contribution of multiple hole pockets. Present study suggests that DFT based electronic calculations provide reasonably good explanations of experimental TE properties of Fe $_{2}$ VAl in the high temperature range of $300-800$ K.

preprint2021arXiv

Experimental and computational approaches to study the high temperature thermoelectric properties of novel topological semimetal CoSi

Here, we study the thermoelectric properties of topological semimetal CoSi in the temperature range $300-800$ K by using combined experimental and density functional theory (DFT) based methods. CoSi is synthesized using arc melting technique and the Rietveld refinement gives the lattice parameters of a = b = c = 4.445 Å. The measured values of Seebeck coefficient (S) shows the non-monotonic behaviour in the studied temperature range with the value of $\sim-$ 81 $μ$ V/K at room temperature. The $|S|$ first increases till 560 K ( $\sim-$ 93 $μ$ V/K) and then decreases up to 800 K ( $\sim-$ 84 $μ$ V/K) indicating the dominating n-type behaviour in the full temperature range. The electrical conductivity, $σ$ (thermal conductivity, $κ$ ) shows the monotonic decreasing (increasing) behaviour with the values of $\sim$ 5.2 $\times 10^{5}$ (12.1 W/m-K) and $\sim$ 3.6 $\times 10^{5}$ (14.2 W/m-K) $Ω^{-1}m^{-1}$ at 300 K and 800 K, respectively. The $κ$ exhibits the temperature dependency as, $κ\propto T^{0.16}$ . The DFT based Boltzmann transport theory is used to understand these behaviour. The multi-band electron and hole pockets appear to be mainly responsible for deciding the temperature dependent transport behaviour. Specifically, the decrease in the $|S|$ above 560 K and change in the slope of $σ$ around 450 K are due to the contribution of thermally generated charge carriers from the hole pockets. The temperature dependent relaxation time is computed which shows temperature dependency of $1/T^{0.35}$ . Present study suggests that electronic band-structure obtained from DFT provides reasonably good estimate of the transport coefficients of CoSi in the high temperature region of $300-800$ K.

preprint2021arXiv

First-principles phonon calculations for lattice dynamics, thermal expansion and lattice thermal conductivity of CoSi at high temperature region

This study presents the first-principles phonon calculations to understand the experimental thermal expansion ( $α(T)$ ) and lattice thermal conductivity ( $κ_{L}$ ) of CoSi at high temperature region. Phonon dispersion is computed using finite displacement method and supercell approach by taking the equilibrium crystal structures obtained from DFT. The calculation of $α(T)$ is done under quasi-harmonic approximation. The $κ_{L}$ is calculated using first-principle anharmonic lattice dynamics calculations under single-mode relaxation time approximation. Calculated $α(T)$ in the temperature range $0-1300$ K gives the good match with existing experimental data. The calculated value of $κ_{L}$ ( $\sim$ 8.0 W/m-K) at 300 K is found to be in good agreement with the experimental value of $\sim$ 8.3 W/m-K. The temperature dependent of phonon lifetime due to phonon-phonon interaction is calculated to understand the behaviour of $κ_{L}$ . Present study suggests that ground state phonon dispersion obtained from DFT based methods gives reasonably good explanation of experimental $α(T)$ and $κ_{L}$ .

preprint2021arXiv

Instrument for simultaneous measurement of Seebeck coefficient and thermal conductivity in the temperature range 300-800 K with python interfacing

Fabrication and characterization of instrument for high-temperature simultaneous measurement of Seebeck coefficient (S) and thermal conductivity ( $κ$ ) has been carried out with python automation. The steady-state based Fourier's law of thermal conduction is employed for $κ$ measurement. The parallel thermal conductance technique is implemented for heat loss measurement. Introducing the thin heater and insulating heater base minimize the heat loss and make the way easier to arrive at high temperature. Measurement of S is carried out using differential method. Same thermocouples are used to measure temperature as well as voltage for S measurement. Care of temperature dependent S of thermocouple has also been taken. Simple design, small size, lightweightmake this instrument more robust. All the components for making sample holder are easily available in the market and can be replaced as per the user demand. This instrument can measure samples with various dimensions and shapes in the temperature range 300 $-$ 800 K. The instrument is validated using different class of samples, such as nickel, gadolinium, Fe $_{2}$ VAl and LaCoO $_{3}$ . Wide range of S from $\sim$ $-$ 20 to $\sim$ 600 $μ$ V/K and $κ$ from $\sim$ 1.1 to $\sim$ 23.5 W/m-K are studied. The measured values of S and k are in good agreement with the reported data.

preprint2021arXiv

Understanding the Seebeck coefficient of LaNiO3 compound in the temperature range 300-620 K

Transition metal oxides have been attracted much attention in thermoelectric community from the last few decades. In the present work, we have synthesized LaNiO $_{3}$ by a simple solution combustion process. To analyze the crystal structure and structural parameters we have used Rietveld refinement method wherein FullProf software is employed. The room temperature x-ray diffraction indicates the trigonal structure with space group $R \, \overline{3} \, c$ (No. 167). The refined values of lattice parameters are a = b = 5.4615 Å\, $\&$ c = 13.1777 Å. Temperature dependent Seebeck coefficient (S) of this compound has been investigated by using experimental and computational tools. The measurement of S is conducted in the temperature range $300-620$ K. The measured values of S in the entire temperature range have negative sign that indicates \textit{n}-type character of the compound. The value of S is found to be $\sim$ $-$ 8 $μ$ V/K at 300 K and at 620 K this value is $\sim$ $-$ 12 $μ$ V/K. The electronic structure calculation is carried out using DFT+\textit{U} method due to having strong correlation in LaNiO $_{3}$ . The calculation predicts the metallic ground state of the compound. Temperature dependent S is calculated using BoltzTraP package and compared with experiment. The best matching between experimental and calculated values of S is observed when self-interaction correction is employed as double counting correction in spin-polarized DFT + \textit{U} (= 1 eV) calculation. Based on the computational results maximum power factors are also calculated for \textit{p}-type and \textit{n}-type doping of this compound.

preprint2020arXiv

Exploring the possibility of enhancing the figure-of-merit ( $>$ 2) of Na $_{0.74}$ CoO $_{2}$ : A combined experimental and theoretical study

Search of new thermoelectric (TE) materials with high \textit{figure-of-merit} (ZT) is always inspired the researcher in TE field. Here, we present a combined experimental and theoretical study of TE properties of Na $_{0.74}$ CoO $_{2}$ compound in high-temperature region. The experimental Seebeck coefficient (S) is found to vary from 64 to 118 $μ$ V/K in the temperature range $300-620$ K. The positive values of S are indicating the dominating p-type behaviour of the compound. The observed value of thermal conductivity ( $κ$ ) is $\sim$ 2.2 W/m-K at 300 K. In the temperature region $300-430$ K, the value of $κ$ increases up to $\sim$ 2.6 W/m-K and then decreases slowly till 620 K with the corresponding value of $\sim$ 2.4 W/m-K. We have also carried out the theoretical calculations and the best matching between experimental and calculated values of transport properties are observed in spin-polarized calculation within DFT+\textit{U} by chosen \textit{U} = 4 eV. The maximum calculated value of ZT is found to be $\sim$ 0.67 at 1200 K for p-type conduction. Our computational study suggests that the possibility of n-type behaviour of the compound which can lead to a large value of ZT at higher temperature region. Electron doping of $\sim$ 5.1 $\times$ 10 $^{20}$ cm $^{-3}$ is expected to give rise the high ZT value of $\sim$ 2.7 at 1200 K. Using these temperature-dependent ZT values, we have calculated the maximum possible values of efficiency ( $η$ ) of thermoelectric generator (TEG) made by p and n-type Na $_{0.74}$ CoO $_{2}$ . The present study suggests that one can get the efficiency of a TE cell as high as $\sim$ 11 $\%$ when the cold and hot end temperature are fixed at 300 K and 1200 K, respectively. Such high values of ZT and efficiency suggest that Na $_{0.74}$ CoO $_{2}$ can be used as a potential candidate for high-temperature TE applications.

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Shamim Sk

Research overview

Is this your work?

7 publications

Density functional study of thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe $_{2}$ VAl at high temperature region

Thermoelectric properties of Fe $_{2}$ VAl at high temperature region: A combined experimental and theoretical study

Experimental and computational approaches to study the high temperature thermoelectric properties of novel topological semimetal CoSi

First-principles phonon calculations for lattice dynamics, thermal expansion and lattice thermal conductivity of CoSi at high temperature region

Instrument for simultaneous measurement of Seebeck coefficient and thermal conductivity in the temperature range 300-800 K with python interfacing

Understanding the Seebeck coefficient of LaNiO3 compound in the temperature range 300-620 K

Exploring the possibility of enhancing the figure-of-merit ( $>$ 2) of Na $_{0.74}$ CoO $_{2}$ : A combined experimental and theoretical study

See the researcher in context

Building this map preview

Shamim Sk

Research overview

Is this your work?

7 publications

Density functional study of thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe2_{2}2​VAl at high temperature region

Thermoelectric properties of Fe2_{2}2​VAl at high temperature region: A combined experimental and theoretical study

Experimental and computational approaches to study the high temperature thermoelectric properties of novel topological semimetal CoSi

First-principles phonon calculations for lattice dynamics, thermal expansion and lattice thermal conductivity of CoSi at high temperature region

Instrument for simultaneous measurement of Seebeck coefficient and thermal conductivity in the temperature range 300-800 K with python interfacing

Understanding the Seebeck coefficient of LaNiO3 compound in the temperature range 300-620 K

Exploring the possibility of enhancing the figure-of-merit ( >>> 2) of Na0.74_{0.74}0.74​CoO2_{2}2​: A combined experimental and theoretical study

See the researcher in context

Building this map preview

Density functional study of thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe $_{2}$ VAl at high temperature region

Thermoelectric properties of Fe $_{2}$ VAl at high temperature region: A combined experimental and theoretical study

Exploring the possibility of enhancing the figure-of-merit ( $>$ 2) of Na $_{0.74}$ CoO $_{2}$ : A combined experimental and theoretical study