BZPEERReading, trust and collaboration for researchDiscover
Workspaces
Network
Opportunities
Account
Researcher profile
Kevin Cook contributes to research discovery and scholarly infrastructure.
Trust snapshot
Actions
Research graph
Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.
BZPEER is loading the nearby papers, people, topics and institutions for this page.
Published work
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new milestone in optical fibre manufacture.
Optical fibre is drawn from a dual-head 3D printer fabricated preform made of two optically transparent plastics with a high index core (NA ~ 0.25, V > 60). The asymmetry observed in the fibre arises from asymmetry in the 3D printing process. The highly multi-mode optical fibre has losses measured by cut-back as low as α ~ 0.44 dB/cm in the near IR.
Large dynamic index measurement range (n = 1 to n = 1.7) using surface plasmon resonance (SPR) shifts is demonstrated with a ZnSe prism at 632.8 nm, limited by the available high index liquid hosts. In contrast to borosilicate based SPR measurements where angular limitations restrict solvent use to water and requires considerable care dealing with Fresnel reflections, the ZnSe approach allows SPR spectroscopies to be applied to a varied range of solvents An uncertainty in angular resolution between 1.5 and 6 deg, depending on the solvent and SPR angle, was estimated. The refractive index change for a given glucose concentration in water was measured to be n = (0.114 to 0.007) per precentage C6H12O6 conc. Given the transmission properties of ZnSe the processes can be readily extended into the mid infrared.
Nanoscale glass milling with mild thermal annealing is proposed and shown to occur within a tri-material composite W profile optical fibre.
Percolation diffusion into long (11.5 cm) self-assembled, ordered mesoporous microfibres is studied using optical transmission and laser ablation inductive coupled mass spectrometry (LA-ICP-MS). Optical transmission based diffusion studies reveal rapid penetration (< 5 s, D > 80 um2.s-1) of Rhodamine B with very little percolation of larger molecules such as zinc tetraphenylporphyrin (ZnTPP) observed under similar loading conditions. The failure of ZnTPP to enter the microfibre was confirmed, in higher resolution, using LA-ICP-MS. In the latter case, LA-ICP-MS was used to determine the diffusion of zinc acetate dihydrate, D ~ 3 x 10-4 nm2.s-1. The large differences between the molecules are accounted for by proposing ordered solvent and structure assisted accelerated diffusion of the Rhodamine B based on its hydrophilicity relative to the zinc compounds. The broader implications and applications for filtration, molecular sieves and a range of devices and uses are described.
The viscosity of an optical fibre over 1000 to 1150 °C is studied by inscribing an optical fibre Bragg grating that can withstand temperatures up to 1200 °C and monitoring fibre elongation under load through the Bragg wavelength shift. This optical interrogation offers high accuracy and reliability compared to direct measurements of elongation, particularly at lower temperatures, thus avoiding significant experimental error. An excellent Arrhenius fit is obtained from which an activation energy for viscous flow of Ea = 450 kJ/mol is extracted; addition of an additional temperature dependent pre-exponential does not change this value. This value is less than that idealised by some literature but consistent with other literature. The log plot of viscosity is overall found to be consistent with that reported in the literature for silica measurements on rod and beams, but substantially higher to past work reported for optical fibres. The discrepancy from an idealised activation energy Ea ~ 700 kJ/mol may be explained by noting the higher fictive temperature of the fibre. On the other hand, past optical fibre results obtained by beam bending with much lower values leave questions regarding the method of viscosity measurement and the time taken for structural equilibration. We note that because regenerated gratings already involve post-annealing to stabilise their operation at higher temperature, the structures are much more relaxed compared to normal fibres. This work highlights the need to stabilize components for operation in harsh environments before their application, despite some mechanical compromise. Given the increasing expectation of all-optical waveguide technologies operating above 1000 °C, the need to study the behaviour of glass over the long term brings added significance to the basic understanding of glass in this regime.
UV laser irradiation (lambda = 193 nm), below and above damage thresholds, is used to both alter and pattern the surface properties of borosilicate slides to tune and control the contact angle of a water drop over the surface. Large variation exceeding 25 deg using laser processing alone, spanning across both sides of the original contact angle of the surface, is reported. An asymmetric contact angle distribution, giving rise to an analogous ellipsoidal-like drop caplet, is shown to improve convective self-assembly of silica nanoparticles into straighter microwires over a spherical caplet.
Both temperature and strain characterization of seed and regenerated gratings with and without post-annealing is reported. The high temperature regeneration has significant impact to thermal characterization and mechanical strength of gratings whilst the post annealing has little effect. The observed difference is evidence of viscoelastic changes in glass structure.
Recent results confirm the presence of molecular oxygen proving that recombination of dissociated silica bonds does not occur. This combined with the observation of nanopores within the nanograting structure in silica, leads to a new interpretation of femtosecond processing based on the unusual characteristics of quenching of tetrahedral silica compared to other glasses. This new approach suggests very different directions and implications for devices, including sensors, based on femtosecond laser processing of glasses.