BZPEERReading, trust and collaboration for researchDiscover
Workspaces
Network
Opportunities
Account
Researcher profile
John Canning contributes to research discovery and scholarly infrastructure.
Trust snapshot
Actions
Research graph
Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.
BZPEER is loading the nearby papers, people, topics and institutions for this page.
Published work
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new milestone in optical fibre manufacture.
Optical fibre is drawn from a dual-head 3D printer fabricated preform made of two optically transparent plastics with a high index core (NA ~ 0.25, V > 60). The asymmetry observed in the fibre arises from asymmetry in the 3D printing process. The highly multi-mode optical fibre has losses measured by cut-back as low as α ~ 0.44 dB/cm in the near IR.
Large dynamic index measurement range (n = 1 to n = 1.7) using surface plasmon resonance (SPR) shifts is demonstrated with a ZnSe prism at 632.8 nm, limited by the available high index liquid hosts. In contrast to borosilicate based SPR measurements where angular limitations restrict solvent use to water and requires considerable care dealing with Fresnel reflections, the ZnSe approach allows SPR spectroscopies to be applied to a varied range of solvents An uncertainty in angular resolution between 1.5 and 6 deg, depending on the solvent and SPR angle, was estimated. The refractive index change for a given glucose concentration in water was measured to be n = (0.114 to 0.007) per precentage C6H12O6 conc. Given the transmission properties of ZnSe the processes can be readily extended into the mid infrared.
Nanoscale glass milling with mild thermal annealing is proposed and shown to occur within a tri-material composite W profile optical fibre.
Using a field-portable, smartphone fluorometer to assess water quality based on the pH response of a designer probe, a map of pH of public tap water sites has been obtained. A custom designed Android application digitally processed and mapped the results utilizing the GPS service of the smartphone. The map generated indicates no disruption in pH for all sites measured. All the data are assessed to fall inside the upper limit of local government regulations and are consistent with authority reported measurements. The work demonstrates a new security concept: environmental forensics utilizing the advantage of real-time analysis for the detection of potential water quality disruption at any point in the city. The concept can be extended on national and global scales to a wide variety of analytes.
A novel portable fluorometer combining the attributes of a smartphone with an easy fit, simple and compact sample chamber fabricated using 3D printing has been developed for pH measurements of environmental water in the field. The results were then compared directly with those obtained using conventional electrode based measurements.
We report the excitation of a surface plasmon resonance (SPR) close to the orthogonal axis of a gold (Au) film on borosilicate glass. Direct spectroscopic measurement of SPR shifts using different liquids are made at ~5° incidence within a reflection spectrophotometer. Scattering of light that is able to penetrate across the film at the interfaces is the proposed mechanism by which coupling, and plasmon localization, is established.
Percolation diffusion into long (11.5 cm) self-assembled, ordered mesoporous microfibres is studied using optical transmission and laser ablation inductive coupled mass spectrometry (LA-ICP-MS). Optical transmission based diffusion studies reveal rapid penetration (< 5 s, D > 80 um2.s-1) of Rhodamine B with very little percolation of larger molecules such as zinc tetraphenylporphyrin (ZnTPP) observed under similar loading conditions. The failure of ZnTPP to enter the microfibre was confirmed, in higher resolution, using LA-ICP-MS. In the latter case, LA-ICP-MS was used to determine the diffusion of zinc acetate dihydrate, D ~ 3 x 10-4 nm2.s-1. The large differences between the molecules are accounted for by proposing ordered solvent and structure assisted accelerated diffusion of the Rhodamine B based on its hydrophilicity relative to the zinc compounds. The broader implications and applications for filtration, molecular sieves and a range of devices and uses are described.
The viscosity of an optical fibre over 1000 to 1150 °C is studied by inscribing an optical fibre Bragg grating that can withstand temperatures up to 1200 °C and monitoring fibre elongation under load through the Bragg wavelength shift. This optical interrogation offers high accuracy and reliability compared to direct measurements of elongation, particularly at lower temperatures, thus avoiding significant experimental error. An excellent Arrhenius fit is obtained from which an activation energy for viscous flow of Ea = 450 kJ/mol is extracted; addition of an additional temperature dependent pre-exponential does not change this value. This value is less than that idealised by some literature but consistent with other literature. The log plot of viscosity is overall found to be consistent with that reported in the literature for silica measurements on rod and beams, but substantially higher to past work reported for optical fibres. The discrepancy from an idealised activation energy Ea ~ 700 kJ/mol may be explained by noting the higher fictive temperature of the fibre. On the other hand, past optical fibre results obtained by beam bending with much lower values leave questions regarding the method of viscosity measurement and the time taken for structural equilibration. We note that because regenerated gratings already involve post-annealing to stabilise their operation at higher temperature, the structures are much more relaxed compared to normal fibres. This work highlights the need to stabilize components for operation in harsh environments before their application, despite some mechanical compromise. Given the increasing expectation of all-optical waveguide technologies operating above 1000 °C, the need to study the behaviour of glass over the long term brings added significance to the basic understanding of glass in this regime.
The ability to manufacture nanomaterials with complex and structured composition using otherwise incompatible materials increasingly underpins the next generation of technologies. This is translating into growing efforts integrating a wider range of materials onto key technology platforms1 - in photonics, one such platform is silica, a passive, low loss and robust medium crucial for efficient optical transport2. Active functionalisation, either through added gain or nonlinearity, is mostly possible through the integration of active materials3, 4. The high temperatures used in manufacturing of silica waveguides, unfortunately, make it impossible to presently integrate many organic and inorganic species critical to achieving this extended functionality. Here, we demonstrate the fabrication of novel waveguides and devices made up of complex silica based materials using the self-assembly of nanoparticles. In particular, the room temperature fabrication of silica microwires integrated with organic dyes (Rhodamine B) and single photon emitting nanodiamonds is presented.
UV laser irradiation (lambda = 193 nm), below and above damage thresholds, is used to both alter and pattern the surface properties of borosilicate slides to tune and control the contact angle of a water drop over the surface. Large variation exceeding 25 deg using laser processing alone, spanning across both sides of the original contact angle of the surface, is reported. An asymmetric contact angle distribution, giving rise to an analogous ellipsoidal-like drop caplet, is shown to improve convective self-assembly of silica nanoparticles into straighter microwires over a spherical caplet.
Both temperature and strain characterization of seed and regenerated gratings with and without post-annealing is reported. The high temperature regeneration has significant impact to thermal characterization and mechanical strength of gratings whilst the post annealing has little effect. The observed difference is evidence of viscoelastic changes in glass structure.
Recent results confirm the presence of molecular oxygen proving that recombination of dissociated silica bonds does not occur. This combined with the observation of nanopores within the nanograting structure in silica, leads to a new interpretation of femtosecond processing based on the unusual characteristics of quenching of tetrahedral silica compared to other glasses. This new approach suggests very different directions and implications for devices, including sensors, based on femtosecond laser processing of glasses.
We propose and demonstrate, through simulation and experiment, how the interaction of an optical field within a waveguide designed for chemical sensing and, more generally, evanescent field spectroscopy can be enhanced substantially by strategic deposition of high index surface layers. These layers draw out the optical field in the vicinity of probing and take advantage of field localisation through optical impedance matching. Localisation of the evanescent field to the inner layer in turn is accompanied by whispering gallery modes within the channels of a structured cylindrical waveguide, further enhancing sensitivity. A novel demonstration based on self-assembled layers made up of TiO2 within a structured optical fibre is demonstrated, using a simple porphyrin as the spectroscopic probe. This technique offers optimisation of the limitations imposed on practical waveguide sensors that are highly sensitive but nearly always at the expense of low loss. The principles have potential ramifications for nanophotonics more generally and these are discussed.