Source author record

Huili Grace Xing

Huili Grace Xing appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

22works
6topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

22 published item(s)

preprint2026arXiv

Shubnikov-de Haas oscillations of two-dimensional electron gases in AlYN/GaN and AlScN/GaN heterostructures

AlYN and AlScN have recently emerged as promising nitride materials that can be integrated with GaN to form two-dimensional electron gases (2DEGs) at heterojunctions. Electron transport properties in these heterostructures have been enhanced through careful design and optimization of epitaxial growth conditions. In this work, we report for the first time Shubnikov-de Haas (SdH) oscillations of 2DEGs in AlYN/GaN and AlScN/GaN heterostructures, grown by metal-organic chemical vapor deposition. SdH oscillations provide direct access to key 2DEG parameters at the Fermi level: (1) carrier density, (2) electron effective mass (m* ~ 0.24 me for AlYN/GaN and m* ~ 0.25 me for AlScN/GaN), and (3) quantum scattering time (~ 68 fs for AlYN/GaN and ~ 70 fs for AlScN/GaN). These measurements of fundamental transport properties provide critical insights for advancing emerging nitride semiconductors for future high-frequency and power electronics.

preprint2025arXiv

Edge emission from 265~nm UV-C LEDs grown by MBE on bulk AlN

UV-C LEDs pseudomorphically grown by MBE on bulk AlN substrates emitting at 265 nm are demonstrated. High current density up to 800 A/cm$^2$, 5 orders of on/off ratio, and low differential on-resistance of 2.6 m$Ω\cdot$cm$^2$ at the highest current density is achieved. The LED heterostructure has a high refractive index waveguide core surrounded by n- and p-cladding layers similar to a laser diode designed for mode confinement at 270 nm to facilitate edge emission and collection of photons. Edge-emitting devices are made by cleaving the fabricated LEDs along the $m$-plane of the wurtzite crystal. Electrical injection results in emission of high energy 4.7 eV photons that are collected from the cleaved edge of the LEDs corresponding to the optical bandgap of the AlGaN active region. The contribution of power dissipation across the n- and p-regions of the diode is discussed. The n-contact resistance to n-AlGaN is identified as the largest contributor to the series resistance of the LED in the present generation of devices.

preprint2022arXiv

Molecular beam homoepitaxy of N-polar AlN: enabling role of Al-assisted surface cleaning

N-polar aluminum nitride (AlN) is an important building block for next-generation high-power RF electronics. We report successful homoepitaxial growth of N-polar AlN by molecular beam epitaxy (MBE) on large-area cost-effective N-polar AlN templates. Direct growth without any in-situ surface cleaning leads to films with inverted Al-polarity. It is found that Al-assisted cleaning before growth enables the epitaxial film to maintain N-polarity. The grown N-polar AlN epilayer with its smooth, pit-free surface duplicates the structural quality of the substrate as evidenced by a clean and smooth growth interface with no noticeable extended defects generation. Near band-edge photoluminescence peaks are observed at room temperature on samples with MBE-grown layers but not on the bare AlN substrates, implying the suppression of non-radiative recombination centers in the epitaxial N-polar AlN. These results are pivotal steps towards future high-power RF electronics and deep ultraviolet photonics based on the N-polar AlN platform.

preprint2022arXiv

N-polar GaN p-n junction diodes with low ideality factors

High-quality N-polar GaN p-n diodes are realized on single-crystal N-polar GaN bulk substrate by plasma-assisted molecular beam epitaxy. The room-temperature current-voltage characteristics reveal a high on/off current ratio of 10^11 at 4 V and an ideality factor of 1.6. As the temperature increases to 200 C, the apparent ideality factor gradually approaches 2. At such high temperatures, Shockley-Read-Hall recombination times of 0.32-0.46 ns are estimated. The measured electroluminescence spectrum is dominated by a strong near-band edge emission, while deep level and acceptor-related luminescence is greatly suppressed. A relatively high reverse breakdown field of 2.4 MV/cm without field-plates is achieved. This work indicates that the quality of N-polar GaN diodes is now approaching to that of their state-of-the-art Ga-polar counterparts.

preprint2021arXiv

Anisotropic dielectric functions, band-to-band transitions, and critical points in α-Ga2O3

We use a combined generalized spectroscopic ellipsometry and density functional theory approach to determine and analyze the anisotropic dielectric functions of an $α$-Ga$_2$O$_3$ thin film. The sample is grown epitaxially by plasma-assisted molecular beam epitaxy on $m$-plane sapphire. Generalized spectroscopic ellipsometry data from multiple sample azimuths in the spectral range from 0.73 eV to 8.75 eV are simultaneously analyzed. Density functional theory is used to calculate the valence and conduction band structure. We identify, for the indirect-bandgap material, two direct band-to-band transitions with $M_0$-type van Hove singularities for polarization perpendicular to the $c$ axis, $E_{0,\perp}=5.46(6)$ eV and $E_{0,\perp}=6.04(1)$ eV, and one direct band-to-band transition with $M_1$-type van Hove singularity for polarization parallel with $E_{0,||}=5.44(2)$ eV. We further identify excitonic contributions with small binding energy of 7 meV associated with the lowest ordinary transition, and a hyperbolic exciton at the $M_1$-type critical point with large binding energy of 178 meV.

preprint2020arXiv

Spin-Orbit-Torque Field-Effect Transistor (SOTFET): Proposal for a New Magnetoelectric Memory

Spin-based memories are attractive for their non-volatility and high durability but provide modest resistance changes, whereas semiconductor logic transistors are capable of large resistance changes, but lack memory function with high durability. The recent availability of multiferroic materials provides an opportunity to directly couple the change in spin states of a magnetic memory to a charge change in a semiconductor transistor. In this work, we propose and analyze the spin-orbit torque field-effect transistor (SOTFET), a device with the potential to significantly boost the energy efficiency of spin-based memories, and to simultaneously offer a palette of new functionalities.

preprint2019arXiv

Molecular Beam Epitaxy Growth of Scandium Nitride on Hexagonal SiC, GaN, and AlN

RF plasma assisted MBE growth of Scandium Nitride (ScN) thin films on GaN (0001)/SiC, AlN (0001)/Al2O3 and on 6H-SiC (0001) hexagonal substrates is found to lead to a face centered cubic (rock-salt) crystal structure with (111) out-of-plane orientation instead of hexagonal orientation. For the first time, cubic (111) twinned patterns in ScN are observed by in-situ electron diffraction during epitaxy, and the twin domains in ScN are detected by electron backscattered diffraction, and further corroborated with X-ray diffraction. The epitaxial ScN films display very smooth, sub nanometer surface roughness at a growth temperature of 750C. Temperature-dependent Hall-effect measurements indicate a constant high n-type carrier concentration of ~1x1020/cm3 and electron mobilities of ~ 20 cm2/Vs.

preprint2019arXiv

Oxygen Incorporation in the MBE growth of ScxGa1-xN and ScxAl1-xN

Secondary-ion Mass Spectrometry (SIMS) is used to determine impurity concentrations of carbon and oxygen in two scandium containing nitride semiconductor multilayer heterostructures: ScxGa1-xN/GaN and ScxAl1-xN/AlN grown by molecular beam epitaxy (MBE). In the ScxGa1-xN/GaN heterostructure grown in metal rich conditions on GaN-SiC template substrates with Sc contents up to 28 atomic percent, the oxygen concentration is found to be below 1x1019/cm3, with an increase directly correlated with the Scandium content. In the ScxAl1-xN-AlN heterostructure grown in nitrogen rich conditions on AlN-Al2O3 template substrates with Sc contents up to 26 atomic percent, the oxygen concentration is found to be between 1019 to 1021/cm3, again directly correlated with the Sc content. The increased oxygen and carbon arises during the deposition of scandium alloyed layers.

preprint2015arXiv

Dual Optical Marker Raman Characterization of Strained GaN-channels on AlN Using AlN/GaN/AlN Quantum Wells and 15N Isotopes

This work shows that the combination of ultrathin highly strained GaN quantum wells embedded in an AlN matrix, with controlled isotopic concentrations of Nitrogen enables a dual marker method for Raman spectroscopy. By combining these techniques, we demonstrate the effectiveness in studying strain in the vertical direction. This technique will enable the precise probing of properties of buried active layers in heterostructures, and can be extended in the future to vertical devices such as those used for optical emitters, and for power electronics.

preprint2015arXiv

Esaki diodes in van der Waals heterojunctions with broken-gap energy band alignment

Van der Waals (vdW) heterojunctions composed of 2-dimensional (2D) layered materials are emerging as a solid-state materials family that exhibit novel physics phenomena that can power high performance electronic and photonic applications. Here, we present the first demonstration of an important building block in vdW solids: room temperature (RT) Esaki tunnel diodes. The Esaki diodes were realized in vdW heterostructures made of black phosphorus (BP) and tin diselenide (SnSe2), two layered semiconductors that possess a broken-gap energy band offset. The presence of a thin insulating barrier between BP and SnSe2 enabled the observation of a prominent negative differential resistance (NDR) region in the forward-bias current-voltage characteristics, with a peak to valley ratio of 1.8 at 300 K and 2.8 at 80 K. A weak temperature dependence of the NDR indicates electron tunneling being the dominant transport mechanism, and a theoretical model shows excellent agreement with the experimental results. Furthermore, the broken-gap band alignment is confirmed by the junction photoresponse and the phosphorus double planes in a single layer of BP are resolved in transmission electron microscopy (TEM) for the first time. Our results represent a significant advance in the fundamental understanding of vdW heterojunctions, and widen the potential applications base of 2D layered materials.

preprint2015arXiv

Layered transition metal dichalcogenides: promising near-lattice-matched substrates for GaN growth

Most III-nitride semiconductors are grown on non-lattice-matched substrates like sapphire or silicon due to the extreme difficulty of obtaining a native GaN substrate. We show that several layered transition-metal dichalcogenides are closely lattice matched to GaN and report the growth of GaN on a range of such layered materials. We report detailed studies of the growth of GaN on mechanically-exfoliated flakes WS$_2$ and MoS$_2$ by metalorganic vapour phase epitaxy. Structural and optical characterization show that strain-free, single-crystal islands of GaN are obtained on the underlying chalcogenide flakes. We obtain strong near-band-edge emission from these layers, and analyse their temperature-dependent photoluminescence properties. We also report a proof-of-concept demonstration of large-area epitaxial growth of GaN on CVD MoS$_2$. Our results show that the transition-metal dichalcogenides can serve as novel near-lattice-matched substrates for nitride growth.

preprint2015arXiv

Unique opportunity to harness polarization in GaN to override the conventional power electronics figure-of-merits

Owing to the large breakdown electric field, wide bandgap semiconductors such as SiC, GaN, Ga2O3 and diamond based power devices are the focus for next generation power switching applications. The unipolar trade-off relationship between the area specific-on resistance and breakdown voltage is often employed to compare the performance limitation among various materials. The GaN material system has a unique advantage due to its prominent spontaneous and piezoelectric polarization effects in GaN, AlN, InN, AlxInyGaN alloys and flexibility in inserting appropriate heterojunctions thus dramatically broaden the device design space.

preprint2014arXiv

Molecular beam epitaxial growth of MoSe2 on graphite, CaF2 and graphene

We report the structural and optical properties of molecular beam epitaxy (MBE) grown 2-dimensional (2D) material molybdenum diselenide (MoSe2) on graphite, CaF2 and epitaxial graphene. Extensive characterizations reveal that 2H- MoSe2 grows by van-der-Waals epitaxy on all 3 substrates with a preferred crystallographic orientation and a Mo:Se ratio of 1:2. Photoluminescence at room temperature (~1.56 eV) is observed in monolayer MoSe2 on both CaF2 and epitaxial graphene. The band edge absorption is very sharp, <60 meV over 3 decades. Overcoming the observed small grains by promoting mobility of Mo atoms would make MBE a powerful technique to achieve high quality 2D materials and heterostructures.

preprint2014arXiv

Self-Assembled Ge QDs Formed by High Temperature Annealing on GaAs and AlxGa1-xAs (001)

This work studies the spontaneous self-assembly of Ge QDs on AlAs, GaAs, and AlGaAs by high temperature in-situ annealing in molecular beam epitaxy (MBE). The morphology of Ge dots formed on AlAs are observed by atom probe tomography, which revealed nearly spherical QDs with diameters approaching 10 nm and confirmed the complete absence of a wetting layer. Reflection high-energy electron diffraction (RHEED) and atomic force microscopy (AFM) of Ge annealed under similar conditions on GaAs and Al0.3Ga0.7As surfaces reveal the gradual suppression of QD formation with decreasing Al-content of the buffer. To investigate the prospects of using encapsulated Ge dots for upconverting photovoltaics, in which photocurrent can still be generated from photons with energy less than the host bandgap, Ge QDs are embedded into the active region of III-V PIN diodes by MBE. It is observed that orders of magnitude higher short-circuit current is obtained at photon energies below the GaAs bandgap compared with a reference PIN diode without Ge QDs. These results demonstrate the promise of Ge QDs for upconverting solar cells and the realization of device-quality integration of group IV and III-V semiconductors.

preprint2014arXiv

Strain Sensitivity in the Nitrogen 1s NEXAFS Spectra of Gallium Nitride

The Nitrogen 1s near edge X-ray absorption fine structure (NEXAFS) of gallium nitride (GaN) shows a strong natural linear dichroism that arises from its anisotropic wurtzite structure. An additional spectroscopic variation arises from lattice strain in epitaxially grown GaN thin films. This variation is directly proportional to the degree of strain for some spectroscopic features. This strain variation is interpreted with the aid of density functional theory calculations.

preprint2013arXiv

A New Class of Electrically Tunable Metamaterial Terahertz Modulators

Switchable metamaterials offer unique solutions for efficiently manipulating electromagnetic waves, particularly for terahertz waves, which has been difficult since naturally occurring materials rarely respond to terahertz frequencies controllably. However, few terahertz modulators demonstrated to date exhibit simultaneously low attenuation and high modulation depth. In this letter we propose a new class of electrically-tunable terahertz metamaterial modulators employing metallic frequency-selective-surfaces (FSS) in conjunction with capacitively-tunable layers of electrons, promising near 100% modulation depth and < 15% attenuation. The fundamental departure in our design from the prior art is tuning enabled by self-gated electron layers that is independent from the metallic FSS. Our proposal is applicable to all possible electrically tunable elements including graphene, Si, MoS2, oxides etc, thus opening up myriad opportunities for realizing high performance switchable metamaterials over an ultra-wide terahertz frequency range.

preprint2013arXiv

Coded-aperture imaging using photo-induced reconfigurable aperture arrays for mapping terahertz beams

We report terahertz coded-aperture imaging using photo-induced reconfigurable aperture arrays on a silicon wafer. The coded aperture was implemented using programmable illumination from a commercially available digital light processing projector. At 590 GHz, each of the array element apertures can be optically turned on and off with a modulation depth of 20 dB and a modulation rate of ~1.3 KHz. Prototype demonstrations of 4 by 4 coded-aperture imaging using Hadamard coding have been performed and this technique has been successfully applied to mapping THz beams by using a 6 by 6 aperture array at 590 GHz. The imaging results agree closely with theoretical calculations based on Gaussian beam transformation, demonstrating that this technique is promising for realizing real-time and low-cost terahertz cameras for many applications. The reported approach provides a simple but powerful means to visualize THz beams, which is highly desired in quasi-optical system alignment, quantum-cascade laser design and characterization, and THz antenna characterization.

preprint2013arXiv

Ge Quantum Dots Encapsulated by AlAs Grown by Molecular Beam Epitaxy on GaAs Without Extended Defects

We demonstrate nearly-spherical, strain-free, self-assembled Ge quantum dots (QDs) fully encapsulated by AlAs, grown on (100) GaAs by molecular beam epitaxy (MBE). The QDs were formed without a wetting layer using a high temperature, in-situ anneal. Subsequent AlAs overgrowth was free from threading dislocations and anti-phase domains. The straddling band alignment for Ge in AlAs promises strong and tunable confinement for both electrons and holes. The reflection high-energy electron diffraction (RHEED) pattern changed from 2x3 to 2x5 with anneal, which can be explained by surface reconstructions based on the electron-counting model.

preprint2013arXiv

Raman and Photoluminescence Study of Dielectric and Thermal Effects on Atomically Thin MoS2

Atomically thin two-dimensional molybdenum disulfide (MoS2) sheets have attracted much attention due to their potential for future electronic applications. They not only present the best planar electrostatic control in a device, but also lend themselves readily for dielectric engineering. In this work, we experimentally investigated the dielectric effect on the Raman and photoluminescence (PL) spectra of monolayer MoS2 by comparing samples with and without HfO2 on top by atomic layer deposition (ALD). Based on considerations of the thermal, doping, strain and dielectric screening influences, it is found that the red shift in the Raman spectrum largely stems from modulation doping of MoS2 by the ALD HfO2, and the red shift in the PL spectrum is most likely due to strain imparted on MoS2 by HfO2. Our work also suggests that due to the intricate dependence of band structure of monolayer MoS2 on strain, one must be cautious to interpret its Raman and PL spectroscopy.

preprint2013arXiv

Single Particle Transport in Two-dimensional Heterojunction Interlayer Tunneling Field Effect Transistor

The single particle tunneling in a vertical stack consisting of monolayers of two-dimensional semiconductors is studied theoretically and its application to a novel Two-dimensional Heterojunction Interlayer Tunneling Field Effect Transistor (Thin-TFET) is proposed and described. The tunneling current is calculated by using a formalism based on the Bardeen's transfer Hamiltonian, and including a semi-classical treatment of scattering and energy broadening effects. The misalignment between the two 2D materials is also studied and found to influence the magnitude of the tunneling current, but have a modest impact on its gate voltage dependence. Our simulation results suggest that the Thin-TFETs can achieve very steep subthreshold swing, whose lower limit is ultimately set by the band tails in the energy gaps of the 2D materials produced by energy broadening. The Thin-TFET is thus very promising as a low voltage, low energy solid state electronic switch.

preprint2012arXiv

Efficient terahertz electro-absorption modulation employing graphene plasmonic structures

We propose and discuss terahertz electro-absorption modulators based on graphene plasmonic structures. The active device consists of a self-gated pair of graphene layers, which are patterned to structures supporting THz plasmonic resonances. These structures allow for efficient control of the effective THz optical conductivity, thus absorption, even at frequencies much higher than the Drude roll-off in graphene where most previously proposed graphene-based devices become inefficient. Our analysis shows that reflectance-based device configurations, engineered so that the electric field is enhanced in the active graphene pair, could achieve very high modulation-depth, even ~100%, at any frequency up to tens of THz.

preprint2010arXiv

Scalability of Atomic-Thin-Body (ATB) Transistors Based on Graphene Nanoribbons

A general solution for the electrostatic potential in an atomic-thin-body (ATB) field-effect transistor geometry is presented. The effective electrostatic scaling length, λeff, is extracted from the analytical model, which cannot be approximated by the lowest order eigenmode as traditionally done in SOI-MOSFETs. An empirical equation for the scaling length that depends on the geometry parameters is proposed. It is shown that even for a thick SiO2 back oxide λeff can be improved efficiently by thinner top oxide thickness, and to some extent, with high-k dielectrics. The model is then applied to self-consistent simulation of graphene nanoribbon (GNR) Schottky-barrier field-effect transistors (SB-FETs) at the ballistic limit. In the case of GNR SB-FETs, for large λeff, the scaling is limited by the conventional electrostatic short channel effects (SCEs). On the other hand, for small λeff, the scaling is limited by direct source-to-drain tunneling. A subthreshold swing below 100mV/dec is still possible with a sub-10nm gate length in GNR SB-FETs.