Source author record

Erik G. Larsson

Erik G. Larsson appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

84works
11topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

84 published item(s)

preprint2026arXiv

Decentralized Time-Varying Optimization for Streaming Data via Temporal Weighting

Classical optimization theory largely focuses on fixed objective functions, whereas many modern learning systems operate in dynamic environments where data arrive sequentially and decisions must be updated continuously. In this work, we study optimization with streaming data over a distributed network of agents. We adopt a structured, weight-based formulation that explicitly captures the streaming-data origin of the time-varying objective: at each time step, every agent receives a new sample, and the network seeks to track the minimizer of a temporally weighted objective formed from all samples observed across the network so far. We focus on decentralized gradient descent (DGD) with a limited communication/computation budget, where at each time step, only a limited number of DGD iterations can be performed before the objective changes again. For strongly convex and smooth losses, we analyze the tracking error with respect to the time-varying minimizer through a fixed-point theory lens. Our analysis reveals that the tracking error decomposes into a fixed-point tracking term and a bias term induced by data heterogeneity across agents. We specialize the analysis to two natural weighting strategies: uniform weights, which treat all samples equally, and exponentially discounted weights, which geometrically decay the influence of older data. Under uniform weighting, DGD tracks the fixed-point at a rate $\mathcal{O}(1/t)$, whereas discounted weighting yields a non-vanishing fixed-point tracking floor controlled by the discount factor. In both cases, decentralization induces an additional non-zero bias floor under a constant step size. We validate our theoretical findings through numerical simulations.

preprint2026arXiv

Drone Surveillance via Coordinated Beam Sweeping in MIMO-ISAC Networks

This paper introduces a scheme for drone surveillance coordinated with the fifth generation (5G) synchronization signal block (SSB) cell-search procedure to simultaneously detect low-altitude drones within a volumetric surveillance grid. Herein, we consider a multistatic configuration where multiple access points (APs) collaboratively illuminate the volume while independently transmitting SSB broadcast signals. Both tasks are performed through a beam sweeping. In the proposed scheme, coordinated APs send sensing beams toward a grid of voxels within the volumetric surveillance region simultaneously with the 5G SSB burst. To prevent interference between communication and sensing signals, we propose a precoder design that guarantees orthogonality of the sensing beam and the SSB in order to maximize the sensing signal-to-interference-plus-noise ratio (SINR) while ensuring a specified SINR for users, as well as minimizing the impact of the direct link. The results demonstrate that the proposed precoder outperforms the non-coordinated precoder and is minimally affected by variations in drone altitude.

preprint2026arXiv

Repeater Swarm-Assisted Cellular Systems: Interaction Stability and Performance Analysis

We consider a cellular massive MIMO system where swarms of wireless repeaters are deployed to improve coverage. These repeaters are full-duplex relays with small form factors that receive and instantaneously retransmit signals. They can be deployed in a plug-and-play manner at low cost, while being transparent to the network--conceptually they are active channel scatterers with amplification capabilities. Two fundamental questions need to be addressed in repeater deployments: (I) How can we prevent destructive effects of positive feedback caused by inter-repeater interaction (i.e., each repeater receives and amplifies signals from others)? (ii) How much performance improvement can be achieved given that repeaters also inject noise and may introduce more interference? To answer these questions, we first derive a generalized Nyquist stability criterion for the repeater swarm system, and provide an easy-to-check stability condition. Then, we study the uplink performance and develop an efficient iterative algorithm that jointly optimizes the repeater gains, user transmit powers, and receive combining weights to maximize the weighted sum rate while ensuring system stability. Numerical results corroborate our theoretical findings and show that the repeaters can significantly improve the system performance, both in sub-6 GHz and millimeter-wave bands. The results also warrant careful deployment to fully realize the benefits of repeaters, for example, by ensuring a high probability of line-of-sight links between repeaters and the base station.

preprint2023arXiv

Grant-Free Random Access of IoT devices in Massive MIMO with Partial CSI

The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing technique and blindly transmit the preamble and data. To detect the active users, we exploit partial channel state information (CSI), which could have been obtained through a previous channel estimate. For static devices, e.g., Internet of Things nodes, it is shown that CSI is less time-variant than assumed in many theoretical works. The presented iterative algorithm uses a maximum likelihood approach to estimate both the activity and a potential phase offset of each known device. The convergence of the proposed algorithm is evaluated. The performance in terms of probability of miss detection and false alarm is assessed for different qualities of partial CSI and different signal-to-noise ratio.

preprint2022arXiv

Analog MIMO Communication for One-shot Distributed Principal Component Analysis

A fundamental algorithm for data analytics at the edge of wireless networks is distributed principal component analysis (DPCA), which finds the most important information embedded in a distributed high-dimensional dataset by distributed computation of a reduced-dimension data subspace, called principal components (PCs). In this paper, to support one-shot DPCA in wireless systems, we propose a framework of analog MIMO transmission featuring the uncoded analog transmission of local PCs for estimating the global PCs. To cope with channel distortion and noise, two maximum-likelihood (global) PC estimators are presented corresponding to the cases with and without receive channel state information (CSI). The first design, termed coherent PC estimator, is derived by solving a Procrustes problem and reveals the form of regularized channel inversion where the regulation attempts to alleviate the effects of both receiver noise and data noise. The second one, termed blind PC estimator, is designed based on the subspace channel-rotation-invariance property and computes a centroid of received local PCs on a Grassmann manifold. Using the manifold-perturbation theory, tight bounds on the mean square subspace distance (MSSD) of both estimators are derived for performance evaluation. The results reveal simple scaling laws of MSSD concerning device population, data and channel signal-to-noise ratios (SNRs), and array sizes. More importantly, both estimators are found to have identical scaling laws, suggesting the dispensability of CSI to accelerate DPCA. Simulation results validate the derived results and demonstrate the promising latency performance of the proposed analog MIMO

preprint2022arXiv

Combining Reciprocity and CSI Feedback in MIMO Systems

Reciprocity-based time-division duplex (TDD) Massive MIMO (multiple-input multiple-output) systems utilize channel estimates obtained in the uplink to perform precoding in the downlink. However, this method has been criticized of breaking down, in the sense that the channel estimates are not good enough to spatially separate multiple user terminals, at low uplink reference signal signal-to-noise ratios, due to insufficient channel estimation quality. Instead, codebook-based downlink precoding has been advocated for as an alternative solution in order to bypass this problem. We analyze this problem by considering a "grid-of-beams world" with a finite number of possible downlink channel realizations. Assuming that the terminal accurately can detect the downlink channel, we show that in the case where reciprocity holds, carefully designing a mapping between the downlink channel and the uplink reference signals will perform better than both the conventional TDD Massive MIMO and frequency-division duplex (FDD) Massive MIMO approach. We derive elegant metrics for designing this mapping, and further, we propose algorithms that find good sequence mappings.

preprint2022arXiv

Data Size-Aware Downlink Massive MIMO: A Session-Based Approach

This letter considers the development of transmission strategies for the downlink of massive multiple-input multiple-output networks, with the objective of minimizing the completion time of the transmission. Specifically, we introduce a session-based scheme that splits time into sessions and allocates different rates in different sessions for the different users. In each session, one user is selected to complete its transmission and will not join subsequent sessions, which results in successively lower levels of interference when moving from one session to the next. An algorithm is developed to assign users and allocate transmit power that minimizes the completion time. Numerical results show that our proposed session-based scheme significantly outperforms conventional non-session-based schemes.

preprint2022arXiv

Energy-Efficient Power Allocation for an Underlay Spectrum Sharing RadioWeaves Network

RadioWeaves network operates a large number of distributed antennas using cell-free architecture to provide high data rates and support a large number of users. Operating this network in an energy-efficient manner in the limited available spectrum is crucial. Therefore, we consider energy efficiency (EE) maximization of a RadioWeaves network that shares spectrum with a collocated primary network in underlay mode. To simplify the problem, we lower bound the non-convex EE objective function to form a convex problem. We then propose a downlink power allocation policy that maximizes the EE of the secondary RadioWeaves network subject to power constraint at each access point and interference constraint at each primary user. Our numerical results investigate the secondary system's performance in interference, power, and EE constrained regimes with correlated fading channels. Furthermore, they show that the proposed power allocation scheme performs significantly better than the simpler equal power allocation scheme.

preprint2022arXiv

Optimal MIMO Combining for Blind Federated Edge Learning with Gradient Sparsification

We provide the optimal receive combining strategy for federated learning in multiple-input multiple-output (MIMO) systems. Our proposed algorithm allows the clients to perform individual gradient sparsification which greatly improves performance in scenarios with heterogeneous (non i.i.d.) training data. The proposed method beats the benchmark by a wide margin.

preprint2022arXiv

Participatory Sensing for Localization of a GNSS Jammer

GNSS receivers are vulnerable to jamming and spoofing attacks, and numerous such incidents have been reported worldwide in the last decade. It is important to detect attacks fast and localize attackers, which can be hard if not impossible without dedicated sensing infrastructure. The notion of participatory sensing, or crowdsensing, is that a large ensemble of voluntary contributors provides the measurements, rather than relying on dedicated sensing infrastructure. This work considers embedded GNSS receivers to provide measurements for participatory jamming detection and localization. Specifically, this work proposes a novel jamming localization algorithm, based on participatory sensing, that exploits AGC and C/N_0 estimates from commercial GNSS receivers. The proposed algorithm does not require knowledge of the jamming power nor of the channels, but automatically estimates all parameters. The algorithm is shown to outperform similar state-of-the-art localization algorithms in relevant scenarios.

preprint2022arXiv

Physical Layer Abstraction Model for RadioWeaves

RadioWeaves, in which distributed antennas with integrated radio and compute resources serve a large number of users, is envisioned to provide high data rates in next generation wireless systems. In this paper, we develop a physical layer abstraction model to evaluate the performance of different RadioWeaves deployment scenarios. This model helps speed up system-level simulators of the RadioWeaves and is made up of two blocks. The first block generates a vector of signal-to-interference-plus-noise ratios (SINRs) corresponding to each coherence block, and the second block predicts the packet error rate corresponding to the SINRs generated. The vector of SINRs generated depends on different parameters such as the number of users, user locations, antenna configurations, and precoders. We have also considered different antenna gain patterns, such as omni-directional and directional microstrip patch antennas. Our model exploits the benefits of exponential effective SINR mapping (EESM). We study the robustness and accuracy of the EESM for RadioWeaves.

preprint2021arXiv

Active Reconfigurable Intelligent Surface Aided Wireless Communications

Reconfigurable Intelligent Surface (RIS) is a promising solution to reconfigure the wireless environment in a controllable way. To compensate for the double-fading attenuation in the RIS-aided link, a large number of passive reflecting elements (REs) are conventionally deployed at the RIS, resulting in large surface size and considerable circuit power consumption. In this paper, we propose a new type of RIS, called active RIS, where each RE is assisted by active loads (negative resistance), that reflect and amplify the incident signal instead of only reflecting it with the adjustable phase shift as in the case of a passive RIS. Therefore, for a given power budget at the RIS, a strengthened RIS-aided link can be achieved by increasing the number of active REs as well as amplifying the incident signal. We consider the use of an active RIS to a single input multiple output (SIMO) system. {However, it would unintentionally amplify the RIS-correlated noise, and thus the proposed system has to balance the conflict between the received signal power maximization and the RIS-correlated noise minimization at the receiver. To achieve this goal, it has to optimize the reflecting coefficient matrix at the RIS and the receive beamforming at the receiver.} An alternating optimization algorithm is proposed to solve the problem. Specifically, the receive beamforming is obtained with a closed-form solution based on linear minimum-mean-square-error (MMSE) criterion, while the reflecting coefficient matrix is obtained by solving a series of sequential convex approximation (SCA) problems. Simulation results show that the proposed active RIS-aided system could achieve better performance over the conventional passive RIS-aided system with the same power budget.

preprint2021arXiv

Adversarial Attacks on Deep Learning Based Power Allocation in a Massive MIMO Network

Deep learning (DL) is becoming popular as a new tool for many applications in wireless communication systems. However, for many classification tasks (e.g., modulation classification) it has been shown that DL-based wireless systems are susceptible to adversarial examples; adversarial examples are well-crafted malicious inputs to the neural network (NN) with the objective to cause erroneous outputs. In this paper, we extend this to regression problems and show that adversarial attacks can break DL-based power allocation in the downlink of a massive multiple-input-multiple-output (maMIMO) network. Specifically, we extend the fast gradient sign method (FGSM), momentum iterative FGSM, and projected gradient descent adversarial attacks in the context of power allocation in a maMIMO system. We benchmark the performance of these attacks and show that with a small perturbation in the input of the NN, the white-box attacks can result in infeasible solutions up to 86%. Furthermore, we investigate the performance of black-box attacks. All the evaluations conducted in this work are based on an open dataset and NN models, which are publicly available.

preprint2021arXiv

Consensus-Based Distributed Computation of Link-Based Network Metrics

Average consensus algorithms have wide applications in distributed computing systems where all the nodes agree on the average value of their initial states by only exchanging information with their local neighbors. In this letter, we look into link-based network metrics which are polynomial functions of pair-wise node attributes defined over the links in a network. Different from node-based average consensus, such link-based metrics depend on both the distribution of node attributes and the underlying network topology. We propose a general algorithm using the weighted average consensus protocol for the distributed computation of link-based network metrics and provide the convergence conditions and convergence rate analysis.

preprint2021arXiv

Enhanced Normalized Conjugate Beamforming for Cell-Free Massive MIMO

In cell-free massive multiple-input multiple-output (MIMO) the fluctuations of the channel gain from the access points to a user are large due to the distributed topology of the system. Because of these fluctuations, data decoding schemes that treat the channel as deterministic perform inefficiently. A way to reduce the channel fluctuations is to design a precoding scheme that equalizes the effective channel gain seen by the users. Conjugate beamforming (CB) poorly contributes to harden the effective channel at the users. In this work, we propose a variant of CB dubbed enhanced normalized CB (ECB), in that the precoding vector consists of the conjugate of the channel estimate normalized by its squared norm. For this scheme, we derive an exact closed-form expression for an achievable downlink spectral efficiency (SE), accounting for channel estimation errors, pilot reuse and user's lack of channel state information (CSI), assuming independent Rayleigh fading channels. We also devise an optimal max-min fairness power allocation based only on large-scale fading quantities. ECB greatly boosts the channel hardening enabling the users to reliably decode data relying only on statistical CSI. As the provided effective channel is nearly deterministic, acquiring CSI at the users does not yield a significant gain.

preprint2021arXiv

Human and Machine Type Communications can Coexist in Uplink Massive MIMO Systems

Future cellular networks are expected to support new communication paradigms such as machine-type communication (MTC) services along with human-type communication (HTC) services. This requires base stations to serve a large number of devices in relatively short channel coherence intervals which renders allocation of orthogonal pilot sequence per-device approaches impractical. Furthermore, the stringent power constraints, place-and-play type connectivity and various data rate requirements of MTC devices make it impossible for the traditional cellular architecture to accommodate MTC and HTC services together. Massive multiple-input-multiple-output (MaMIMO) technology has the potential to allow the coexistence of HTC and MTC services, thanks to its inherent spatial multiplexing properties and low transmission power requirements. In this work, we investigate the performance of a single cell under a shared physical channel assumption for MTC and HTC services and propose a novel scheme for sharing the time-frequency resources. The analysis reveals that MaMIMO can significantly enhance the performance of such a setup and allow the inclusion of MTC services into the cellular networks without requiring additional resources.

preprint2021arXiv

Is NOMA Efficient in Multi-Antenna Networks? A Critical Look at Next Generation Multiple Access Techniques

In this paper, we take a critical and fresh look at the downlink multi-antenna NOMA literature. Instead of contrasting NOMA with OMA, we contrast NOMA with two other baselines. The first is conventional Multi-User Linear Precoding (MULP). The second is Rate-Splitting Multiple Access (RSMA) based on multi-antenna Rate-Splitting (RS) and SIC. We show that there is some confusion about the benefits of NOMA, and we dispel the associated misconceptions. First, we highlight why NOMA is inefficient in multi-antenna settings based on basic multiplexing gain analysis. We stress that the issue lies in how the NOMA literature has been hastily applied to multi-antenna setups, resulting in a misuse of spatial dimensions and therefore loss in multiplexing gains and rate. Second, we show that NOMA incurs a severe multiplexing gain loss despite an increased receiver complexity due to an inefficient use of SIC receivers. Third, we emphasize that much of the merits of NOMA are due to the constant comparison to OMA instead of comparing it to MULP and RS baselines. We then expose the pivotal design constraint that multi-antenna NOMA requires one user to fully decode the messages of the other users. This design constraint is responsible for the multiplexing gain erosion, rate loss, and inefficient use of SIC receivers in multi-antenna settings. Our results confirm that NOMA should not be applied blindly to multi-antenna settings, highlight the scenarios where MULP outperforms NOMA and vice versa, and demonstrate the inefficiency, performance loss and complexity disadvantages of NOMA compared to RS. The first takeaway message is that, while NOMA is not beneficial in most multi-antenna deployments. The second takeaway message is that other non-orthogonal transmission frameworks, such as RS, exist which fully exploit the multiplexing gain and the benefits of SIC to boost the rate in multi-antenna settings.

preprint2021arXiv

Moving Object Classification with a Sub-6 GHz Massive MIMO Array using Real Data

Classification between different activities in an indoor environment using wireless signals is an emerging technology for various applications, including intrusion detection, patient care, and smart home. Researchers have shown different methods to classify activities and their potential benefits by utilizing WiFi signals. In this paper, we analyze classification of moving objects by employing machine learning on real data from a massive multi-input-multi-output (MIMO) system in an indoor environment. We conduct measurements for different activities in both line-of-sight and non line-of-sight scenarios with a massive MIMO testbed operating at 3.7 GHz. We propose algorithms to exploit amplitude and phase-based features classification task. For the considered setup, we benchmark the classification performance and show that we can achieve up to 98% accuracy using real massive MIMO data, even with a small number of experiments. Furthermore, we demonstrate the gain in performance results with a massive MIMO system as compared with that of a limited number of antennas such as in WiFi devices.

preprint2021arXiv

MRT-based Joint Unicast and Multigroup Multicast Transmission in Massive MIMO Systems

We study joint unicast and multigroup multicast transmission in single-cell massive multiple-input-multiple-output (MIMO) systems, under maximum ratio transmission. For the unicast transmission, the objective is to maximize the weighted sum spectral efficiency (SE) of the unicast user terminals (UTs) and for the multicast transmission the objective is to maximize the minimum SE of the multicast UTs. These two problems are coupled to each other in a conflicting manner, due to their shared power resource and interference. To address this, we formulate a multiobjective optimization problem (MOOP). We derive the Pareto boundary of the MOOP analytically and determine the values of the system parameters to achieve any desired Pareto optimal point. Moreover, we prove that the Pareto region is convex, hence the system should serve the unicast and multicast UTs at the same time-frequency resource.

preprint2021arXiv

NOMA Versus Massive MIMO in Rayleigh Fading

This paper compares the sum rates and rate regions achieved by power-domain NOMA (non-orthogonal multiple access) and standard massive MIMO (multiple-input multiple-output) techniques. We prove analytically that massive MIMO always outperforms NOMA in i.i.d.~Rayleigh fading channels, if a sufficient number of antennas are used at the base stations. The simulation results show that the crossing point occurs already when having 20-30 antennas, which is far less than what is considered for the next generation cellular networks.

preprint2021arXiv

Optimizing Information Freshness in a Multiple Access Channel with Heterogeneous Devices

In this work, we study age-optimal scheduling with stability constraints in a multiple access channel with two heterogeneous source nodes transmitting to a common destination. The first node is connected to a power grid and it has randomly arriving data packets. Another energy harvesting (EH) sensor monitors a stochastic process and sends status updates to the destination. We formulate an optimization problem that aims at minimizing the average age of information (AoI) of the EH node subject to the queue stability condition of the grid-connected node. First, we consider a Probabilistic Random Access (PRA) policy where both nodes make independent transmission decisions based on some fixed probability distributions. We show that with this policy, the average AoI is equal to the average peak AoI, if the EH node only sends freshly generated samples. In addition, we derive the optimal solution in closed form, which reveals some interesting properties of the considered system. Furthermore, we consider a Drift-Plus-Penalty (DPP) policy and develop AoI-optimal and peak-AoI-optimal scheduling algorithms using the Lyapunov optimization theory. Simulation results show that the DPP policy outperforms the PRA policy in various scenarios, especially when the destination node has low multi-packet reception capabilities.

preprint2021arXiv

User Association in Scalable Cell-Free Massive MIMO Systems

In this work, we consider the uplink of a scalable cell-free massive MIMO system where the users are served only by a subset of access points (APs) in the network. The APs are physically grouped into predetermined "cell-centric clusters", which are connected to different cooperative central processing units (CPUs). Given the cooperative nature of the considered communications network, we assume that each user is associated with a "virtual cluster", that, in general, involves some APs belonging to different cell-centric clusters. Assuming the maximum-ratio-combining at the APs, we propose a user-association procedure aimed at the maximization of the sum-rate of the users in the system. The proposed procedure is based on the Hungarian Algorithm and exploits only the knowledge of the position of the APs in the network. Numerical results reveal that the performance of the proposed approach is not always better than the alternatives but it offers a considerably lower backhaul load with a negligible performance loss compared to full-cell free approaches.

preprint2020arXiv

Artificial Intelligence Enabled Wireless Networking for 5G and Beyond: Recent Advances and Future Challenges

The fifth generation (5G) wireless communication networks are currently being deployed, and beyond 5G (B5G) networks are expected to be developed over the next decade. Artificial intelligence (AI) technologies and, in particular, machine learning (ML) have the potential to efficiently solve the unstructured and seemingly intractable problems by involving large amounts of data that need to be dealt with in B5G. This article studies how AI and ML can be leveraged for the design and operation of B5G networks. We first provide a comprehensive survey of recent advances and future challenges that result from bringing AI/ML technologies into B5G wireless networks. Our survey touches different aspects of wireless network design and optimization, including channel measurements, modeling, and estimation, physical-layer research, and network management and optimization. Then, ML algorithms and applications to B5G networks are reviewed, followed by an overview of standard developments of applying AI/ML algorithms to B5G networks. We conclude this study by the future challenges on applying AI/ML to B5G networks.

preprint2020arXiv

Cell-Free Massive MIMO With Radio Stripes and Sequential Uplink Processing

Cell-free Massive MIMO (mMIMO) is envisaged to be a next-generation technology beyond 5G with its high spectral efficiency and superior spatial diversity as compared to that of conventional MIMO technology. The main principle is that many distributed access points (APs) cooperate to simultaneously serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture. We propose a novel sequential processing algorithm with normalized linear minimum mean square error (N-LMMSE) combining at every. This algorithm enables interference suppression in cell-free MMO while keeping the cost and front-haul requirements low. The spectral efficiency of the proposed algorithm is computed and analyzed. We conclude that it provides an attractive trade-off between low front-haul requirements and high spectral efficiency.

preprint2020arXiv

Joint Power Allocation and Load Balancing Optimization for Energy-Efficient Cell-Free Massive MIMO Networks

Large-scale distributed antenna systems with many access points (APs) that serve the users by coherent joint transmission is being considered for 5G-and-beyond networks. The technology is called Cell-free Massive MIMO and can provide a more uniform service level to the users than a conventional cellular topology. For a given user set, only a subset of the APs is likely needed to satisfy the users' performance demands, particularly outside the peak traffic hours. To find achieve an energy-efficient load balancing, we minimize the total downlink power consumption at the APs, considering both the transmit powers and hardware dissipation. APs can be temporarily turned off to reduce the latter part. The formulated optimization problem is non-convex but, nevertheless, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. Since the computational complexity is prohibitive for real-time implementation, we also propose two low-complexity algorithms that exploit the inherent group-sparsity and the optimized transmit powers in the problem formulation. Numerical results manifest that our optimization algorithms can greatly reduce the power consumption compared to keeping all APs turned on and only minimizing the transmit powers. Moreover, the low-complexity algorithms can effectively handle the power allocation and AP activation for large-scale networks.

preprint2020arXiv

Local Partial Zero-Forcing Precoding for Cell-Free Massive MIMO

Cell-free Massive MIMO (multiple-input multiple-output) is a promising distributed network architecture for 5G-and-beyond systems. It guarantees ubiquitous coverage at high spectral efficiency (SE) by leveraging signal co-processing at multiple access points (APs), aggressive spatial user multiplexing and extraordinary macro-diversity gain. In this study, we propose two distributed precoding schemes, referred to as \textit{local partial zero-forcing} (PZF) and \textit{local protective partial zero-forcing} (PPZF), that further improve the spectral efficiency by providing an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-hauling overhead, and implementable by APs with very few antennas. We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. PZF and PPZF can substantially outperform maximum ratio transmission and zero-forcing, and their performance is comparable to that achieved by regularized zero-forcing (RZF), which is a benchmark in the downlink. Importantly, these closed-form expressions can be employed to devise optimal (long-term) power control strategies that are also suitable for RZF, whose closed-form expression for the SE is not available.

preprint2020arXiv

Massive Access for 5G and Beyond

Massive access, also known as massive connectivity or massive machine-type communication (mMTC), is one of the main use cases of the fifth-generation (5G) and beyond 5G (B5G) wireless networks. A typical application of massive access is the cellular Internet of Things (IoT). Different from conventional human-type communication, massive access aims at realizing efficient and reliable communications for a massive number of IoT devices. Hence, the main characteristics of massive access include low power, massive connectivity, and broad coverage, which require new concepts, theories, and paradigms for the design of next-generation cellular networks. This paper presents a comprehensive survey of aspects of massive access design for B5G wireless networks. Specifically, we provide a detailed review of massive access from the perspectives of theory, protocols, techniques, coverage, energy, and security. Furthermore, several future research directions and challenges are identified.

preprint2020arXiv

Massively Distributed Antenna Systems with Non-Ideal Optical Fiber Front-hauls: A Promising Technology for 6G Wireless Communication Systems

Employing massively distributed antennas brings radio access points (RAPs) closer to users, thus enables aggressive spectrum reuse that can bridge gaps between the scarce spectrum resource and extremely high connection densities in future wireless systems. Examples include cloud radio access network (C-RAN), ultra-dense network (UDN), and cell-free massive multiple-input multiple-output (MIMO) systems. These systems are usually designed in the form of fiber-wireless communications (FWC), where distributed antennas or RAPs are connected to a central unit (CU) through optical front-hauls. A large number of densely deployed antennas or RAPs requires an extensive infrastructure of optical front-hauls. Consequently, the cost, complexity, and power consumption of the network of optical front-hauls may dominate the performance of the entire system. This article provides an overview and outlook on the architecture, modeling, design, and performance of massively distributed antenna systems with non-ideal optical front-hauls. Complex interactions between optical front-hauls and wireless access links require optimum designs across the optical and wireless domains by jointly exploiting their unique characteristics. It is demonstrated that systems with analog radio-frequency-over-fiber (RFoF) links outperform their baseband-over-fiber (BBoF) or intermediate-frequency-over-fiber (IFoF) counterparts for systems with shorter fiber length and more RAPs, which are all desired properties for future wireless communication systems.

preprint2020arXiv

Max-Min Optimal Beamforming for Cell-Free Massive MIMO

This letter develops an optimum beamforming method for downlink transmissions in cell-free massive multiple-input multiple-output (MIMO) systems, which employ a massive number of distributed access points to provide concurrent services to multiple users. The optimum design is formulated as a max-min problem that maximizes the minimum signal-to-interference-plus-noise ratio of all users. It is shown analytically that the problem is quasi-concave, and the optimum solution is obtained with the second-order cone programming. The proposed method identifies the best achievable beamforming performance in cell-free massive MIMO systems. The results can be used as benchmarks for the design of practical low complexity beamformers.

preprint2020arXiv

On the Impact of Random Actions on Opinion Dynamics

We study opinion dynamics in a social network with stubborn agents who influence their neighbors but who themselves always stick to their initial opinion. We consider first the well-known DeGroot model. While it is known in the literature that this model can lead to consensus even in the presence of a stubborn agent, we show that the same result holds under weaker assumptions than has been previously reported. We then consider a recent extension of the DeGroot model in which the opinion of each agent is a random Bernoulli distributed variable, and by leveraging on the first result we establish that this model also leads to consensus, in the sense of convergence in probability, in the presence of a stubborn agent. Moreover, all agents' opinions converge to that of the stubborn agent. We also consider a variation on this model where the stubborn agent is replaced with a drifting agent and show that herding is achieved also in this case. Finally, we offer a detailed critique of a proof regarding a claim about a closely related model in the recent literature.

preprint2020arXiv

Performance Analysis of Quantized Uplink Massive MIMO-OFDM With Oversampling Under Adjacent Channel Interference

Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resolution ADCs under frequency selective fading with orthogonal frequency division multiplexing in the perfect and imperfect receiver channel state information cases. We derive analytical expressions for the bit error rate and ergodic capacity. We show that the interfering band can be suppressed by increasing the number of antennas or the oversampling rate when a zero-forcing receiver is employed.

preprint2020arXiv

Power Control in Cellular Massive MIMO with Varying User Activity: A Deep Learning Solution

This paper considers the sum spectral efficiency (SE) optimization problem in multi-cell Massive MIMO systems with a varying number of active users. This is formulated as a joint pilot and data power control problem. Since the problem is non-convex, we first derive a novel iterative algorithm that obtains a stationary point in polynomial time. To enable real-time implementation, we also develop a deep learning solution. The proposed neural network, PowerNet, only uses the large-scale fading information to predict both the pilot and data powers. The main novelty is that we exploit the problem structure to design a single neural network that can handle a dynamically varying number of active users; hence, PowerNet is simultaneously approximating many different power control functions with varying number inputs and outputs. This is not the case in prior works and thus makes PowerNet an important step towards a practically useful solution. Numerical results demonstrate that PowerNet only loses $2\%$ in sum SE, compared to the iterative algorithm, in a nine-cell system with up to $90$ active users per in each coherence interval, and the runtime was only $0.03$ ms on a graphics processing unit (GPU). When good data labels are selected for the training phase, PowerNet can yield better sum SE than by solving the optimization problem with one initial point.

preprint2020arXiv

RadioWeaves for efficient connectivity: analysis andimpact of constraints in actual deployments

We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the environment. Technologically, RadioWeaves will deploy distributed arrays to create both favorable propagation and antenna array interaction. The technology leverages on the ideas of large-scale intelligent surfaces and cell-free wireless access. Offering close to the service connectivity and computing, new grades in energy efficiency,reliability, and low latency can be reached. The new concept moreover can be scaled up easily to offer a very high capacity inspecific areas demanding so. In this paper we anticipate how two different demanding use cases can be served well by a dedicated RadioWeaves deployment: a crowd scenario and a highly reflective factory environment. A practical approach towards a RadioWeaves prototype, integrating dispersed electronics invisibly in a room environment, is introduced. We outline diverse R\&D challenges that need to be addressed to realize the great potential of the RadioWeaves technology.

preprint2020arXiv

Reconfigurable Intelligent Surfaces: Three Myths and Two Critical Questions

The search for physical-layer technologies that can play a key role in beyond-5G systems has started. One option is reconfigurable intelligent surfaces (RIS), which can collect wireless signals from a transmitter and passively beamform them towards the receiver. The technology has exciting prospects and is quickly gaining traction in the communication community, but in the current hype we have witnessed how several myths and overstatements are spreading in the literature. In this article, we take a neutral look at the RIS technology. We first review the fundamentals and then explain specific features that can be easily misinterpreted. In particular, we debunk three myths: 1) Current network technology can only control the transmitter and receiver, not the environment in between; 2) A better asymptotic array gain is achieved than with conventional beamforming; 3) The pathloss is the same as with anomalous mirrors. To inspire further research, we conclude by identifying two critical questions that must be answered for RIS to become a successful technology: 1) What is a convincing use case for RIS?; 2) How can we estimate channels and control an RIS in real time?

preprint2020arXiv

Self-Learning Detector for the Cell-Free Massive MIMO Uplink: The Line-of-Sight Case

The precoding in cell-free massive multiple-input multiple-output (MIMO) technology relies on accurate knowledge of channel responses between users (UEs) and access points (APs). Obtaining high-quality channel estimates in turn requires the path losses between pairs of UEs and APs to be known. These path losses may change rapidly especially in line-of-sight environments with moving blocking objects. A difficulty in the estimation of path losses is pilot contamination, that is, simultaneously transmitted pilots from different UEs that may add up destructively or constructively by chance, seriously affecting the estimation quality (and hence the eventual performance). A method for estimation of path losses, along with an accompanying pilot transmission scheme, is proposed that works for both Rayleigh fading and line-of-sight channels and that significantly improves performance over baseline state-of-the-art. The salient feature of the pilot transmission scheme is that pilots are structurally phase-rotated over different coherence blocks (according to a pre-determined function known to all parties), in order to create an effective statistical distribution of the received pilot signal that can be efficiently exploited by the proposed estimation algorithm.

preprint2020arXiv

Symbiotic Radio: Cognitive Backscattering Communications for Future Wireless Networks

The heterogenous wireless services and exponentially growing traffic call for novel spectrum- and energy-efficient wireless communication technologies. In this paper, a new technique, called symbiotic radio (SR), is proposed to exploit the benefits and address the drawbacks of cognitive radio (CR) and ambient backscattering communications(AmBC), leading to mutualism spectrum sharing and highly reliable backscattering communications. In particular, the secondary transmitter (STx) in SR transmits messages to the secondary receiver (SRx) over the RF signals originating from the primary transmitter (PTx) based on cognitive backscattering communications, thus the secondary system shares not only the radio spectrum, but also the power, and infrastructure with the primary system. In return, the secondary transmission provides beneficial multipath diversity to the primary system, therefore the two systems form mutualism spectrum sharing. More importantly, joint decoding is exploited at SRx to achieve highly reliable backscattering communications. To exploit the full potential of SR, in this paper, we address three fundamental tasks in SR: (1) enhancing the backscattering link via active load; (2) achieving highly reliable communications through joint decoding; and (3) capturing PTx's RF signals using reconfigurable intelligent surfaces. Emerging applications, design challenges and open research problems will also be discussed.

preprint2020arXiv

Using Intelligent Reflecting Surfaces for Rank Improvement in MIMO Communications

An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a larger impact on the channel capacity: rank improvement. One of the classical bottlenecks of point-to-point MIMO communications is that the capacity gains provided by spatial multiplexing are only large at high SNR, and high SNR channels are mainly appearing in line-of-sight (LoS) scenarios where the channel matrix has low rank and therefore does not support spatial multiplexing. We demonstrate how an IRS can be used and optimized in such scenarios to increase the rank of the channel matrix, leading to substantial capacity gains.

preprint2018arXiv

Downlink Power Control in Massive MIMO Networks with Distributed Antenna Arrays

In this paper, we investigate downlink power control in massive multiple-input multiple-output (MIMO) networks with distributed antenna arrays. The base station (BS) in each cell consists of multiple antenna arrays, which are deployed in arbitrary locations within the cell. Due to the spatial separation between antenna arrays, the large-scale propagation effect is different from a user to different antenna arrays in a cell, which makes power control a challenging problem as compared to conventional massive MIMO. We assume that the BS in each cell obtains the channel estimates via uplink pilots. Based on the channel estimates, the BSs perform maximum ratio transmission for the downlink. We then derive a closed-form spectral efficiency (SE) expression, where the channels are subject to correlated fading. Utilizing the derived expression, we propose a max-min power control algorithm to ensure that each user in the network receives a uniform quality of service. Numerical results demonstrate that, for the network considered in this work, optimizing for max-min SE through the max-min power control improves the sum SE of the network as compared to equal power allocation.

preprint2016arXiv

Downlink Power Control for Massive MIMO Cellular Systems with Optimal User Association

This paper aims to minimize the total transmit power consumption for Massive MIMO (multiple-input multiple-output) downlink cellular systems when each user is served by the optimized subset of the base stations (BSs). We derive a lower bound on the ergodic spectral efficiency (SE) for Rayleigh fading channels and maximum ratio transmission (MRT) when the BSs cooperate using non-coherent joint transmission. We solve the joint user association and downlink transmit power minimization problem optimally under fixed SE constraints. Furthermore, we solve a max-min fairness problem with user specific weights that maximizes the worst SE among the users. The optimal BS-user association rule is derived, which is different from maximum signal-to-noise-ratio (max-SNR) association. Simulation results manifest that the proposed methods can provide good SE for the users using less transmit power than in small-scale systems and that the optimal user association can effectively balance the load between BSs when needed.

preprint2016arXiv

Joint Beamforming and Broadcasting in Massive MIMO

The downlink of a massive MIMO system is considered for the case in which the base station must concurrently serve two categories of terminals: one group to which imperfect instantaneous channel state information (CSI) is available, and one group to which no CSI is available. Motivating applications include broadcasting of public channels and control information in wireless networks. A new technique is developed and analyzed: joint beamforming and broadcasting (JBB), by which the base station beamforms to the group of terminals to which CSI is available, and broadcasts to the other group of terminals, to which no CSI is available. The broadcast information does not interfere with the beamforming as it is placed in the nullspace of the channel matrix collectively seen by the terminals targeted by the beamforming. JBB is compared to orthogonal access (OA), by which the base station partitions the time-frequency resources into two disjunct parts, one for each group of terminals. It is shown that JBB can substantially outperform OA in terms of required total radiated power for given rate targets.

preprint2016arXiv

Joint Power Allocation and User Association Optimization for Massive MIMO Systems

This paper investigates the joint power allocation and user association problem in multi-cell Massive MIMO (multiple-input multiple-output) downlink (DL) systems. The target is to minimize the total transmit power consumption when each user is served by an optimized subset of the base stations (BSs), using non-coherent joint transmission. We first derive a lower bound on the ergodic spectral efficiency (SE), which is applicable for any channel distribution and precoding scheme. Closed-form expressions are obtained for Rayleigh fading channels with either maximum ratio transmission (MRT) or zero forcing (ZF) precoding. From these bounds, we further formulate the DL power minimization problems with fixed SE constraints for the users. These problems are proved to be solvable as linear programs, giving the optimal power allocation and BS-user association with low complexity. Furthermore, we formulate a max-min fairness problem which maximizes the worst SE among the users, and we show that it can be solved as a quasi-linear program. Simulations manifest that the proposed methods provide good SE for the users using less transmit power than in small-scale systems and the optimal user association can effectively balance the load between BSs when needed. Even though our framework allows the joint transmission from multiple BSs, there is an overwhelming probability that only one BS is associated with each user at the optimal solution.

preprint2016arXiv

Multi-Cell Massive MIMO Performance with Double Scattering Channels

This paper investigates the spectral efficiency (SE) of multi-cell Massive Multi-Input Multi-Output (MIMO) using different channel models. Prior works have derived closed-form SE bounds and approximations for Gaussian distributed channels, while we consider the double scattering model-a prime example of a non-Gaussian channel for which it is intractable to obtain closed form SE expressions. The channels are estimated using limited resources, which gives rise to pilot contamination, and the estimates are used for linear detection and to compute the SE numerically. Analytical and numerical examples are used to describe the key behaviors of the double scattering models, which differ from conventional Massive MIMO models. Finally, we provide multi-cell simulation results that compare the double scattering model with uncorrelated Rayleigh fading and explain under what conditions we can expect to achieve similar SEs.

preprint2016arXiv

No Downlink Pilots are Needed in TDD Massive MIMO

We consider the Massive Multiple-Input Multiple-Output (MIMO) downlink with maximum-ratio and zero-forcing processing and time-division duplex (TDD) operation. To decode, the terminals must know their instantaneous effective channel gain. Conventionally, it is assumed that by virtue of channel hardening, this instantaneous gain is close to its average and hence that terminals can rely on knowledge of that average (also known as statistical channel information). However, in some propagation environments, such as keyhole channels, channel hardening does not hold. We propose a blind algorithm to estimate the effective channel gain at each user, that does not require any downlink pilots. We derive a capacity lower bound of each user for our proposed scheme, applicable to any propagation channel. Compared to the case of no downlink pilots (relying on channel hardening), and compared to training-based estimation using downlink pilots, our blind algorithm performs significantly better. The difference is especially pronounced in environments that do not offer channel hardening.

preprint2016arXiv

On the Feasibility of Wireless Energy Transfer Using Massive Antenna Arrays

We illustrate potential benefits of using massive antenna arrays for wireless energy transfer (WET). Specifically, we analyze probability of outage in WET over fading channels when a base station (BS) with multiple antennas beamforms energy to a wireless sensor node (WSN). Our analytical results show that by using massive antenna arrays, the range of WET can be increased for a given target outage probability. We prove that by using multiple-antenna arrays at the BS, a lower downlink energy is required to get the same outage performance, resulting into savings of radiated energy. We show that for energy levels used in WET, the outage performance with least-squares or minimum mean-square error channel estimates is same as that obtained based on perfect channel estimates. We observe that a strong line-of-sight component between the BS and WSN lowers outage probability. Furthermore, by deploying more antennas at the BS, a larger energy can be transferred reliably to the WSN at a given target outage performance for the sensor to be able to perform its main tasks. In our numerical examples, the RF power received at the input of the sensor is assumed to be on the order of a mW, such that the rectenna operates at an efficiency in the order of 50 %.

preprint2016arXiv

Random Access for Massive MIMO Systems with Intra-Cell Pilot Contamination

Massive MIMO systems, where the base stations are equipped with hundreds of antenna elements, are an attractive way to attain unprecedented spectral efficiency in future wireless networks. In the "classical" massive MIMO setting, the terminals are assumed fully loaded and a main impairment to the performance comes from the inter-cell pilot contamination, i.e., interference from terminals in neighboring cells using the same pilots as in the home cell. However, when the terminals are active intermittently, it is viable to avoid inter-cell contamination by pre-allocation of pilots, while same-cell terminals use random access to select the allocated pilot sequences. This leads to the problem of intra-cell pilot contamination. We propose a framework for random access in massive MIMO networks and derive new uplink sum rate expressions that take intra-cell pilot collisions, intermittent terminal activity, and interference into account. We use these expressions to optimize the terminal activation probability and pilot length.

preprint2016arXiv

Random Access Protocol for Massive MIMO: Strongest-User Collision Resolution (SUCR)

Wireless networks with many antennas at the base stations and multiplexing of many users, known as Massive MIMO systems, are key to handle the rapid growth of data traffic. As the number of users increases, the random access in contemporary networks will be flooded by user collisions. In this paper, we propose a reengineered random access protocol, coined strongest-user collision resolution (SUCR). It exploits the channel hardening feature of Massive MIMO channels to enable each user to detect collisions, determine how strong the contenders' channels are, and only keep transmitting if it has the strongest channel gain. The proposed SUCR protocol can quickly and distributively resolve the vast majority of all pilot collisions.

preprint2015arXiv

A Multi-cell MMSE Detector for Massive MIMO Systems and New Large System Analysis

In this paper, a new multi-cell MMSE detector is proposed for massive MIMO systems. Let $K$ and $B$ denote the number of users in each cell and the number of available pilot sequences in the network, respectively, with $B = βK$, where $β\ge 1 $ is called the pilot reuse factor. The novelty of the multi-cell MMSE detector is that it utilizes all $B$ channel directions that can be estimated locally at a base station, so that intra-cell interference, parts of the inter-cell interference and the noise can all be actively suppressed, while conventional detectors only use the $K$ intra-cell channels. Furthermore, in the large-system limit, a deterministic equivalent expression of the uplink SINR for the proposed multi-cell MMSE is derived. The expression is easy to compute and accounts for power control for the pilot and payload, imperfect channel estimation and arbitrary pilot allocation. Numerical results show that significant sum spectral efficiency gains can be obtained by the multi-cell MMSE over the conventional single-cell MMSE and the recent multi-cell ZF, and the gains become more significant as $β$ and/or $K$ increases. Furthermore, the deterministic equivalent is shown to be very accurate even for relatively small system dimensions.

preprint2015arXiv

A Multi-cell MMSE Precoder for Massive MIMO Systems and New Large System Analysis

In this paper, a new multi-cell MMSE precoder is proposed for massive MIMO systems. We consider a multi-cell network where each cell has $K$ users and $B$ orthogonal pilot sequences are available, with $B = βK$ and $β\ge 1$ being the pilot reuse factor over the network. In comparison with conventional single-cell precoding which only uses the $K$ intra-cell channel estimates, the proposed multi-cell MMSE precoder utilizes all $B$ channel directions that can be estimated locally at a base station, so that the transmission is designed spatially to suppress both parts of the inter-cell and intra-cell interference. To evaluate the performance, a large-scale approximation of the downlink SINR for the proposed multi-cell MMSE precoder is derived and the approximation is tight in the large-system limit. Power control for the pilot and payload, imperfect channel estimation and arbitrary pilot allocation are accounted for in our precoder. Numerical results show that the proposed multi-cell MMSE precoder achieves a significant sum spectral efficiency gain over the classical single-cell MMSE precoder and the gain increases as $K$ or $β$ grows. Compared with the recent M-ZF precoder, whose performance degrades drastically for a large $K$, our M-MMSE can always guarantee a high and stable performance. Moreover, the large-scale approximation is easy to compute and shown to be accurate even for small system dimensions.

preprint2015arXiv

Blind Estimation of Effective Downlink Channel Gains in Massive MIMO

We consider the massive MIMO downlink with time-division duplex (TDD) operation and conjugate beamforming transmission. To reliably decode the desired signals, the users need to know the effective channel gain. In this paper, we propose a blind channel estimation method which can be applied at the users and which does not require any downlink pilots. We show that our proposed scheme can substantially outperform the case where each user has only statistical channel knowledge, and that the difference in performance is particularly large in certain types of channel, most notably keyhole channels. Compared to schemes that rely on downlink pilots, our proposed scheme yields more accurate channel estimates for a wide range of signal-to-noise ratios and avoid spending time-frequency resources on pilots.

preprint2015arXiv

Cell-Free Massive MIMO: Uniformly Great Service For Everyone

We consider the downlink of Cell-Free Massive MIMO systems, where a very large number of distributed access points (APs) simultaneously serve a much smaller number of users. Each AP uses local channel estimates obtained from received uplink pilots and applies conjugate beamforming to transmit data to the users. We derive a closed-form expression for the achievable rate. This expression enables us to design an optimal max-min power control scheme that gives equal quality of service to all users. We further compare the performance of the Cell-Free Massive MIMO system to that of a conventional small-cell network and show that the throughput of the Cell-Free system is much more concentrated around its median compared to that of the small-cell system. The Cell-Free Massive MIMO system can provide an almost $20-$fold increase in 95%-likely per-user throughput, compared with the small-cell system. Furthermore, Cell-Free systems are more robust to shadow fading correlation than small-cell systems.

preprint2015arXiv

Distributed Massive MIMO in Cellular Networks: Impact of Imperfect Hardware and Number of Oscillators

Distributed massive multiple-input multiple-output (MIMO) combines the array gain of coherent MIMO processing with the proximity gains of distributed antenna setups. In this paper, we analyze how transceiver hardware impairments affect the downlink with maximum ratio transmission. We derive closed-form spectral efficiencies expressions and study their asymptotic behavior as the number of the antennas increases. We prove a scaling law on the hardware quality, which reveals that massive MIMO is resilient to additive distortions, while multiplicative phase noise is a limiting factor. It is also better to have separate oscillators at each antenna than one per BS.

preprint2015arXiv

Fingerprinting-Based Positioning in Distributed Massive MIMO Systems

Location awareness in wireless networks may enable many applications such as emergency services, autonomous driving and geographic routing. Although there are many available positioning techniques, none of them is adapted to work with massive multiple-in-multiple-out (MIMO) systems, which represent a leading 5G technology candidate. In this paper, we discuss possible solutions for positioning of mobile stations using a vector of signals at the base station, equipped with many antennas distributed over deployment area. Our main proposal is to use fingerprinting techniques based on a vector of received signal strengths. This kind of methods are able to work in highly-cluttered multipath environments, and require just one base station, in contrast to standard range-based and angle-based techniques. We also provide a solution for fingerprinting-based positioning based on Gaussian process regression, and discuss main applications and challenges.

preprint2015arXiv

Kernel Methods for Accurate UWB-Based Ranging with Reduced Complexity

Accurate and robust positioning in multipath environments can enable many applications, such as search-and-rescue and asset tracking. For this problem, ultra-wideband (UWB) technology can provide the most accurate range estimates, which are required for range-based positioning. However, UWB still faces a problem with non-line-of-sight (NLOS) measurements, in which the range estimates based on time-of-arrival (TOA) will typically be positively biased. There are many techniques that address this problem, mainly based on NLOS identification and NLOS error mitigation algorithms. However, these techniques do not exploit all available information in the UWB channel impulse response. Kernel-based machine learning methods, such as Gaussian Process Regression (GPR), are able to make use of all information, but they may be too complex in their original form. In this paper, we propose novel ranging methods based on kernel principal component analysis (kPCA), in which the selected channel parameters are projected onto a nonlinear orthogonal high-dimensional space, and a subset of these projections is then used as an input for ranging. We evaluate the proposed methods using real UWB measurements obtained in a basement tunnel, and found that one of the proposed methods is able to outperform state-of-the-art, even if little training samples are available.

preprint2015arXiv

Massive MIMO for Maximal Spectral Efficiency: How Many Users and Pilots Should Be Allocated?

Massive MIMO is a promising technique to increase the spectral efficiency (SE) of cellular networks, by deploying antenna arrays with hundreds or thousands of active elements at the base stations and performing coherent transceiver processing. A common rule-of-thumb is that these systems should have an order of magnitude more antennas, $M$, than scheduled users, $K$, because the users' channels are likely to be near-orthogonal when $M/K > 10$. However, it has not been proved that this rule-of-thumb actually maximizes the SE. In this paper, we analyze how the optimal number of scheduled users, $K^\star$, depends on $M$ and other system parameters. To this end, new SE expressions are derived to enable efficient system-level analysis with power control, arbitrary pilot reuse, and random user locations. The value of $K^\star$ in the large-$M$ regime is derived in closed form, while simulations are used to show what happens at finite $M$, in different interference scenarios, with different pilot reuse factors, and for different processing schemes. Up to half the coherence block should be dedicated to pilots and the optimal $M/K$ is less than 10 in many cases of practical relevance. Interestingly, $K^\star$ depends strongly on the processing scheme and hence it is unfair to compare different schemes using the same $K$.

preprint2015arXiv

Massive MIMO in Real Propagation Environments: Do All Antennas Contribute Equally?

Massive MIMO can greatly increase both spectral and transmit-energy efficiency. This is achieved by allowing the number of antennas and RF chains to grow very large. However, the challenges include high system complexity and hardware energy consumption. Here we investigate the possibilities to reduce the required number of RF chains, by performing antenna selection. While this approach is not a very effective strategy for theoretical independent Rayleigh fading channels, a substantial reduction in the number of RF chains can be achieved for real massive MIMO channels, without significant performance loss. We evaluate antenna selection performance on measured channels at 2.6 GHz, using a linear and a cylindrical array, both having 128 elements. Sum-rate maximization is used as the criterion for antenna selection. A selection scheme based on convex optimization is nearly optimal and used as a benchmark. The achieved sum-rate is compared with that of a very simple scheme that selects the antennas with the highest received power. The power-based scheme gives performance close to the convex optimization scheme, for the measured channels. This observation indicates a potential for significant reductions of massive MIMO implementation complexity, by reducing the number of RF chains and performing antenna selection using simple algorithms.

preprint2015arXiv

Massive MIMO with Multi-cell MMSE Processing: Exploiting All Pilots for Interference Suppression

In this paper, a new state-of-the-art multi-cell MMSE scheme is proposed for massive MIMO networks, which includes an uplink MMSE detector and a downlink MMSE precoder. The main novelty is that it exploits all available pilots for interference suppression. Specifically, let $K$ and $B$ denote the number of users per cell and the number of orthogonal pilot sequences in the network, respectively, where $β= B/K$ is the pilot reuse factor. Then our multi-cell MMSE scheme utilizes all $B$ channel directions, that can be estimated locally at each base station, to actively suppress both intra-cell and inter-cell interference. The proposed scheme is particularly practical and general, since power control for the pilot and payload, imperfect channel estimation and arbitrary pilot allocation are all accounted for. Simulations show that significant spectral efficiency (SE) gains are obtained over the single-cell MMSE scheme and the multi-cell ZF, particularly for large $β$ and/or $K$. Furthermore, large-scale approximations of the uplink and downlink SINRs are derived, which are asymptotically tight in the large-system limit. The approximations are easy to compute and very accurate even for small system dimensions. Using these SINR approximations, a low-complexity power control algorithm is also proposed to maximize the sum SE.

preprint2015arXiv

Massive MIMO with Optimal Power and Training Duration Allocation

We consider the uplink of massive multicell multiple-input multiple-output systems, where the base stations (BSs), equipped with massive arrays, serve simultaneously several terminals in the same frequency band. We assume that the BS estimates the channel from uplink training, and then uses the maximum ratio combining technique to detect the signals transmitted from all terminals in its own cell. We propose an optimal resource allocation scheme which jointly selects the training duration, training signal power, and data signal power in order to maximize the sum spectral efficiency, for a given total energy budget spent in a coherence interval. Numerical results verify the benefits of the optimal resource allocation scheme. Furthermore, we show that more training signal power should be used at low signal-to-noise ratio (SNRs), and vice versa at high SNRs. Interestingly, for the entire SNR regime, the optimal training duration is equal to the number of terminals.

preprint2015arXiv

Massive MIMO: Ten Myths and One Critical Question

Wireless communications is one of the most successful technologies in modern years, given that an exponential growth rate in wireless traffic has been sustained for over a century (known as Cooper's law). This trend will certainly continue driven by new innovative applications; for example, augmented reality and internet-of-things. Massive MIMO (multiple-input multiple-output) has been identified as a key technology to handle orders of magnitude more data traffic. Despite the attention it is receiving from the communication community, we have personally witnessed that Massive MIMO is subject to several widespread misunderstandings, as epitomized by following (fictional) abstract: "The Massive MIMO technology uses a nearly infinite number of high-quality antennas at the base stations. By having at least an order of magnitude more antennas than active terminals, one can exploit asymptotic behaviors that some special kinds of wireless channels have. This technology looks great at first sight, but unfortunately the signal processing complexity is off the charts and the antenna arrays would be so huge that it can only be implemented in millimeter wave bands." The statements above are, in fact, completely false. In this overview article, we identify ten myths and explain why they are not true. We also ask a question that is critical for the practical adoption of the technology and which will require intense future research activities to answer properly. We provide references to key technical papers that support our claims, while a further list of related overview and technical papers can be found at the Massive MIMO Info Point: http://massivemimo.eu

preprint2015arXiv

ML Detection in Phase Noise Impaired SIMO Channels with Uplink Training

The problem of maximum likelihood (ML) detection in training-assisted single-input multiple-output (SIMO) systems with phase noise impairments is studied for two different scenarios, i.e. the case when the channel is deterministic and known (constant channel) and the case when the channel is stochastic and unknown (fading channel). Further, two different operations with respect to the phase noise sources are considered, namely, the case of identical phase noise sources and the case of independent phase noise sources over the antennas. In all scenarios the optimal detector is derived for a very general parametrization of the phase noise distribution. Further, a high signal-to-noise-ratio (SNR) analysis is performed to show that symbol-error-rate (SER) floors appear in all cases. The SER floor in the case of identical phase noise sources (for both constant and fading channels) is independent of the number of antenna elements. In contrast, the SER floor in the case of independent phase noise sources is reduced when increasing the number of antenna elements (for both constant and fading channels). Finally, the system model is extended to multiple data channel uses and it is shown that the conclusions are valid for these setups, as well.

preprint2015arXiv

Optimal Detection in Training Assisted SIMO Systems with Phase Noise Impairments

In this paper, the problem of optimal maximum likelihood detection in a single user single-input multiple-output (SIMO) channel with phase noise at the receiver is considered. The optimal detection rules under training are derived for two operation modes, namely when the phase increments are fully correlated among the $M$ receiver antennas (synchronous operation) and when they are independent (non-synchronous operation). The phase noise increments are parameterized by a very general distribution, which includes the Wiener phase noise model as a special case. It is proven that phase noise creates a symbol-error-rate (SER) floor for both operation modes. In the synchronous operation this error floor is independent of $M$, while it goes to zero exponentially with $M$ in the non-synchronous operation.

preprint2015arXiv

Target Tracking in Confined Environments with Uncertain Sensor Positions

To ensure safety in confined environments such as mines or subway tunnels, a (wireless) sensor network can be deployed to monitor various environmental conditions. One of its most important applications is to track personnel, mobile equipment and vehicles. However, the state-of-the-art algorithms assume that the positions of the sensors are perfectly known, which is not necessarily true due to imprecise placement and/or dropping of sensors. Therefore, we propose an automatic approach for simultaneous refinement of sensors' positions and target tracking. We divide the considered area in a finite number of cells, define dynamic and measurement models, and apply a discrete variant of belief propagation which can efficiently solve this high-dimensional problem, and handle all non-Gaussian uncertainties expected in this kind of environments. Finally, we use ray-tracing simulation to generate an artificial mine-like environment and generate synthetic measurement data. According to our extensive simulation study, the proposed approach performs significantly better than standard Bayesian target tracking and localization algorithms, and provides robustness against outliers.

preprint2015arXiv

Three Practical Aspects of Massive MIMO: Intermittent User Activity, Pilot Synchronism, and Asymmetric Deployment

This paper considers three aspects of Massive MIMO (multiple-input multiple-output) communication networks that have received little attention in previous works, but are important to understand when designing and implementing this promising wireless technology. First, we analyze how bursty data traffic behaviors affect the system. Using a probabilistic model for intermittent user activity, we show that the spectral efficiency (SE) scales gracefully with reduced user activity. Then, we make an analytic comparison between synchronous and asynchronous pilot signaling, and prove that the choice between these has no impact on the SE. Finally, we provide an analytical and numerical study of the SE achieved with random network deployment.

preprint2014arXiv

Aspects of Favorable Propagation in Massive MIMO

Favorable propagation, defined as mutual orthogonality among the vector-valued channels to the terminals, is one of the key properties of the radio channel that is exploited in Massive MIMO. However, there has been little work that studies this topic in detail. In this paper, we first show that favorable propagation offers the most desirable scenario in terms of maximizing the sum-capacity. One useful proxy for whether propagation is favorable or not is the channel condition number. However, this proxy is not good for the case where the norms of the channel vectors may not be equal. For this case, to evaluate how favorable the propagation offered by the channel is, we propose a ``distance from favorable propagation'' measure, which is the gap between the sum-capacity and the maximum capacity obtained under favorable propagation. Secondly, we examine how favorable the channels can be for two extreme scenarios: i.i.d. Rayleigh fading and uniform random line-of-sight (UR-LoS). Both environments offer (nearly) favorable propagation. Furthermore, to analyze the UR-LoS model, we propose an urns-and-balls model. This model is simple and explains the singular value spread characteristic of the UR-LoS model well.

preprint2014arXiv

Improving the Performance of the Zero-Forcing Multiuser MISO Downlink Precoder through User Grouping

We consider the Multiple Input Single Output (MISO) Gaussian Broadcast channel with $N_t$ antennas at the base station (BS) and $N_u$ single-antenna users in the downlink. We propose a novel user grouping precoder which improves the sum rate performance of the Zero-Forcing (ZF) precoder specially when the channel is ill-conditioned. The proposed precoder partitions all the users into small groups of equal size. Downlink beamforming is then done in such a way that, at each user's receiver the interference from the signal intended for users not in its group is nulled out. Intra-group interference still remains, and is cancelled through successive interference pre-subtraction at the BS using Dirty Paper Coding (DPC). The proposed user grouping method is different from user selection, since it is a method for precoding of information to the selected (scheduled) users, and not for selecting which users are to be scheduled. Through analysis and simulations, the proposed user grouping based precoder is shown to achieve significant improvement in the achievable sum rate when compared to the ZF precoder. When users are paired (i.e., each group has two users), the complexity of the proposed precoder is $O(N_u^3) + O(N_u^2 N_t)$ which is the same as that of the ZF precoder.

preprint2014arXiv

Massive MIMO for Next Generation Wireless Systems

Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over conventional point-to-point MIMO: it works with cheap single-antenna terminals, a rich scattering environment is not required, and resource allocation is simplified because every active terminal utilizes all of the time-frequency bins. However, multi-user MIMO, as originally envisioned with roughly equal numbers of service-antennas and terminals and frequency division duplex operation, is not a scalable technology. Massive MIMO (also known as "Large-Scale Antenna Systems", "Very Large MIMO", "Hyper MIMO", "Full-Dimension MIMO" & "ARGOS") makes a clean break with current practice through the use of a large excess of service-antennas over active terminals and time division duplex operation. Extra antennas help by focusing energy into ever-smaller regions of space to bring huge improvements in throughput and radiated energy efficiency. Other benefits of massive MIMO include the extensive use of inexpensive low-power components, reduced latency, simplification of the media access control (MAC) layer, and robustness to intentional jamming. The anticipated throughput depend on the propagation environment providing asymptotically orthogonal channels to the terminals, but so far experiments have not disclosed any limitations in this regard. While massive MIMO renders many traditional research problems irrelevant, it uncovers entirely new problems that urgently need attention: the challenge of making many low-cost low-precision components that work effectively together, acquisition and synchronization for newly-joined terminals, the exploitation of extra degrees of freedom provided by the excess of service-antennas, reducing internal power consumption to achieve total energy efficiency reductions, and finding new deployment scenarios. This paper presents an overview of the massive MIMO concept and contemporary research.

preprint2014arXiv

Massive MIMO with 1-bit ADC

We investigate massive multiple-input-multiple output (MIMO) uplink systems with 1-bit analog-to-digital converters (ADCs) on each receiver antenna. Receivers that rely on 1-bit ADC do not need energy-consuming interfaces such as automatic gain control (AGC). This decreases both ADC building and operational costs. Our design is based on maximal ratio combining (MRC), zero-forcing (ZF), and least squares (LS) detection, taking into account the effects of the 1-bit ADC on channel estimation. Through numerical results, we show good performance of the system in terms of mutual information and symbol error rate (SER). Furthermore, we provide an analytical approach to calculate the mutual information and SER of the MRC receiver. The analytical approach reduces complexity in the sense that a symbol and channel noise vectors Monte Carlo simulation is avoided.

preprint2014arXiv

Multipair Full-Duplex Relaying with Massive Arrays and Linear Processing

We consider a multipair decode-and-forward relay channel, where multiple sources transmit simultaneously their signals to multiple destinations with the help of a full-duplex relay station. We assume that the relay station is equipped with massive arrays, while all sources and destinations have a single antenna. The relay station uses channel estimates obtained from received pilots and zero-forcing (ZF) or maximum-ratio combining/maximum-ratio transmission (MRC/MRT) to process the signals. To reduce significantly the loop interference effect, we propose two techniques: i) using a massive receive antenna array; or ii) using a massive transmit antenna array together with very low transmit power at the relay station. We derive an exact achievable rate in closed-form for MRC/MRT processing and an analytical approximation of the achievable rate for ZF processing. This approximation is very tight, especially for large number of relay station antennas. These closed-form expressions enable us to determine the regions where the full-duplex mode outperforms the half-duplex mode, as well as, to design an optimal power allocation scheme. This optimal power allocation scheme aims to maximize the energy efficiency for a given sum spectral efficiency and under peak power constraints at the relay station and sources. Numerical results verify the effectiveness of the optimal power allocation scheme. Furthermore, we show that, by doubling the number of transmit/receive antennas at the relay station, the transmit power of each source and of the relay station can be reduced by 1.5dB if the pilot power is equal to the signal power, and by 3dB if the pilot power is kept fixed, while maintaining a given quality-of-service.

preprint2014arXiv

Optimizing Multi-Cell Massive MIMO for Spectral Efficiency: How Many Users Should Be Scheduled?

Massive MIMO is a promising technique to increase the spectral efficiency of cellular networks, by deploying antenna arrays with hundreds or thousands of active elements at the base stations and performing coherent beamforming. A common rule-of-thumb is that these systems should have an order of magnitude more antennas, $N$, than scheduled users, $K$, because the users' channels are then likely to be quasi-orthogonal. However, it has not been proved that this rule-of-thumb actually maximizes the spectral efficiency. In this paper, we analyze how the optimal number of scheduled users, $K^\star$, depends on $N$ and other system parameters. The value of $K^\star$ in the large-$N$ regime is derived in closed form, while simulations are used to show what happens at finite $N$, in different interference scenarios, and for different beamforming.

preprint2014arXiv

SUMIS: Near-Optimal Soft-In Soft-Out MIMO Detection With Low and Fixed Complexity

The fundamental problem of our interest here is soft-input soft-output multiple-input multiple-output (MIMO) detection. We propose a method, referred to as subspace marginalization with interference suppression (SUMIS), that yields unprecedented performance at low and fixed (deterministic) complexity. Our method provides a well-defined tradeoff between computational complexity and performance. Apart from an initial sorting step consisting of selecting channel-matrix columns, the algorithm involves no searching nor algorithmic branching; hence the algorithm has a completely predictable run-time and allows for a highly parallel implementation. We numerically assess the performance of SUMIS in different practical settings: full/partial channel state information, sequential/iterative decoding, and low/high rate outer codes. We also comment on how the SUMIS method performs in systems with a large number of transmit antennas.

preprint2014arXiv

Uplink Performance of Time-Reversal MRC in Massive MIMO Systems Subject to Phase Noise

Multi-user multiple-input multiple-output (MU-MIMO) cellular systems with an excess of base station (BS) antennas (Massive MIMO) offer unprecedented multiplexing gains and radiated energy efficiency. Oscillator phase noise is introduced in the transmitter and receiver radio frequency chains and severely degrades the performance of communication systems. We study the effect of oscillator phase noise in frequency-selective Massive MIMO systems with imperfect channel state information (CSI). In particular, we consider two distinct operation modes, namely when the phase noise processes at the $M$ BS antennas are identical (synchronous operation) and when they are independent (non-synchronous operation). We analyze a linear and low-complexity time-reversal maximum-ratio combining (TR-MRC) reception strategy. For both operation modes we derive a lower bound on the sum-capacity and we compare their performance. Based on the derived achievable sum-rates, we show that with the proposed receive processing an $O(\sqrt{M})$ array gain is achievable. Due to the phase noise drift the estimated effective channel becomes progressively outdated. Therefore, phase noise effectively limits the length of the interval used for data transmission and the number of scheduled users. The derived achievable rates provide insights into the optimum choice of the data interval length and the number of scheduled users.

preprint2013arXiv

Achievable Outage Rate Regions for the MISO Interference Channel

We consider the slow-fading two-user multiple-input single-output (MISO) interference channel. We want to understand which rate points can be achieved, allowing a non-zero outage probability. We do so by defining four different outage rate regions. The definitions differ on whether the rates are declared in outage jointly or individually and whether the transmitters have instantaneous or statistical channel state information (CSI). The focus is on the instantaneous CSI case with individual outage, where we propose a stochastic mapping from the rate point and the channel realization to the beamforming vectors. A major contribution is that we prove that the stochastic component of this mapping is independent of the actual channel realization.

preprint2013arXiv

Constant-Envelope Multi-User Precoding for Frequency-Selective Massive MIMO Systems

We consider downlink precoding in a frequency-selective multi-user Massive MIMO system with highly efficient but non-linear power amplifiers at the base station (BS). A low-complexity precoding algorithm is proposed, which generates constant-envelope (CE) signals at each BS antenna. To achieve a desired per-user information rate, the extra total transmit power required under the per-antenna CE constraint when compared to the commonly used less stringent total average transmit power constraint, is small.

preprint2013arXiv

Efficient Computation of Pareto Optimal Beamforming Vectors for the MISO Interference Channel with Successive Interference Cancellation

We study the two-user multiple-input single-output (MISO) Gaussian interference channel where the transmitters have perfect channel state information and employ single-stream beamforming. The receivers are capable of performing successive interference cancellation, so when the interfering signal is strong enough, it can be decoded, treating the desired signal as noise, and subtracted from the received signal, before the desired signal is decoded. We propose efficient methods to compute the Pareto-optimal rate points and corresponding beamforming vector pairs, by maximizing the rate of one link given the rate of the other link. We do so by splitting the original problem into four subproblems corresponding to the combinations of the receivers' decoding strategies - either decode the interference or treat it as additive noise. We utilize recently proposed parameterizations of the optimal beamforming vectors to equivalently reformulate each subproblem as a quasi-concave problem, which we solve very efficiently either analytically or via scalar numerical optimization. The computational complexity of the proposed methods is several orders-of-magnitude less than the complexity of the state-of-the-art methods. We use the proposed methods to illustrate the effect of the strength and spatial correlation of the channels on the shape of the rate region.

preprint2013arXiv

Massive MU-MIMO Downlink TDD Systems with Linear Precoding and Downlink Pilots

We consider a massive MU-MIMO downlink time-division duplex system where a base station (BS) equipped with many antennas serves several single-antenna users in the same time-frequency resource. We assume that the BS uses linear precoding for the transmission. To reliably decode the signals transmitted from the BS, each user should have an estimate of its channel. In this work, we consider an efficient channel estimation scheme to acquire CSI at each user, called beamforming training scheme. With the beamforming training scheme, the BS precodes the pilot sequences and forwards to all users. Then, based on the received pilots, each user uses minimum mean-square error channel estimation to estimate the effective channel gains. The channel estimation overhead of this scheme does not depend on the number of BS antennas, and is only proportional to the number of users. We then derive a lower bound on the capacity for maximum-ratio transmission and zero-forcing precoding techniques which enables us to evaluate the spectral efficiency taking into account the spectral efficiency loss associated with the transmission of the downlink pilots. Comparing with previous work where each user uses only the statistical channel properties to decode the transmitted signals, we see that the proposed beamforming training scheme is preferable for moderate and low-mobility environments.

preprint2013arXiv

Multi-Pair Amplify-and-Forward Relaying with Very Large Antenna Arrays

We consider a multi-pair relay channel where multiple sources simultaneously communicate with destinations using a relay. Each source or destination has only a single antenna, while the relay is equipped with a very large antenna array. We investigate the power efficiency of this system when maximum ratio combining/maximal ratio transmission (MRC/MRT) or zero-forcing (ZF) processing is used at the relay. Using a very large array, the transmit power of each source or relay (or both) can be made inversely proportional to the number of relay antennas while maintaining a given quality-of-service. At the same time, the achievable sum rate can be increased by a factor of the number of source-destination pairs. We show that when the number of antennas grows to infinity, the asymptotic achievable rates of MRC/MRT and ZF are the same if we scale the power at the sources. Depending on the large scale fading effect, MRC/MRT can outperform ZF or vice versa if we scale the power at the relay.

preprint2013arXiv

Simultaneous Information and Power Transfer for Broadband Wireless Systems

Far-field microwave power transfer (MPT) will free wireless sensors and other mobile devices from the constraints imposed by finite battery capacities. Integrating MPT with wireless communications to support simultaneous information and power transfer (SIPT) allows the same spectrum to be used for dual purposes without compromising the quality of service. A novel approach is presented in this paper for realizing SIPT in a broadband system where orthogonal frequency division multiplexing and transmit beamforming are deployed to create a set of parallel sub-channels for SIPT, which simplifies resource allocation. Supported by a proposed reconfigurable mobile architecture, different system configurations are considered by combining single-user/multiuser systems, downlink/uplink information transfer, and variable/fixed coding rates. Optimizing the power control for these configurations results in a new class of multiuser power-control problems featuring circuit-power constraints, specifying that the transferred power must be sufficiently large to support the operation of the receiver circuitry. Solving these problems gives a set of power-control algorithms that exploit channel diversity in frequency for simultaneously enhancing the throughput and the MPT efficiency. For the system configurations with variable coding rates, the algorithms are variants of water-filling that account for the circuit-power constraints. The optimal algorithms for those configurations with fixed coding rates are shown to sequentially allocate mobiles their required power for decoding in the ascending order until the entire budgeted power is spent. The required power for a mobile is derived as simple functions of the minimum signal-to-noise ratio for correct decoding, the circuit power and sub-channel gains.

preprint2012arXiv

Energy and Spectral Efficiency of Very Large Multiuser MIMO Systems

A multiplicity of autonomous terminals simultaneously transmits data streams to a compact array of antennas. The array uses imperfect channel-state information derived from transmitted pilots to extract the individual data streams. The power radiated by the terminals can be made inversely proportional to the square-root of the number of base station antennas with no reduction in performance. In contrast if perfect channel-state information were available the power could be made inversely proportional to the number of antennas. Lower capacity bounds for maximum-ratio combining (MRC), zero-forcing (ZF) and minimum mean-square error (MMSE) detection are derived. A MRC receiver normally performs worse than ZF and MMSE. However as power levels are reduced, the cross-talk introduced by the inferior maximum-ratio receiver eventually falls below the noise level and this simple receiver becomes a viable option. The tradeoff between the energy efficiency (as measured in bits/J) and spectral efficiency (as measured in bits/channel use/terminal) is quantified. It is shown that the use of moderately large antenna arrays can improve the spectral and energy efficiency with orders of magnitude compared to a single-antenna system.

preprint2012arXiv

On Optimal Link Activation with Interference Cancellation in Wireless Networking

A fundamental aspect in performance engineering of wireless networks is optimizing the set of links that can be concurrently activated to meet given signal-to-interference-and-noise ratio (SINR) thresholds. The solution of this combinatorial problem is the key element in scheduling and cross-layer resource management. Previous works on link activation assume single-user decoding receivers, that treat interference in the same way as noise. In this paper, we assume multiuser decoding receivers, which can cancel strongly interfering signals. As a result, in contrast to classical spatial reuse, links being close to each other are more likely to be active simultaneously. Our goal here is to deliver a comprehensive theoretical and numerical study on optimal link activation under this novel setup, in order to provide insight into the gains from adopting interference cancellation. We therefore consider the optimal problem setting of successive interference cancellation (SIC), as well as the simpler, yet instructive, case of parallel interference cancellation (PIC). We prove that both problems are NP-hard and develop compact integer linear programming formulations that enable us to approach the global optimum solutions. We provide an extensive numerical performance evaluation, indicating that for low to medium SINR thresholds the improvement is quite substantial, especially with SIC, whereas for high SINR thresholds the improvement diminishes and both schemes perform equally well.

preprint2012arXiv

PAR-Aware Large-Scale Multi-User MIMO-OFDM Downlink

We investigate an orthogonal frequency-division multiplexing (OFDM)-based downlink transmission scheme for large-scale multi-user (MU) multiple-input multiple-output (MIMO) wireless systems. The use of OFDM causes a high peak-to-average (power) ratio (PAR), which necessitates expensive and power-inefficient radio-frequency (RF) components at the base station. In this paper, we present a novel downlink transmission scheme, which exploits the massive degrees-of-freedom available in large-scale MU-MIMO-OFDM systems to achieve low PAR. Specifically, we propose to jointly perform MU precoding, OFDM modulation, and PAR reduction by solving a convex optimization problem. We develop a corresponding fast iterative truncation algorithm (FITRA) and show numerical results to demonstrate tremendous PAR-reduction capabilities. The significantly reduced linearity requirements eventually enable the use of low-cost RF components for the large-scale MU-MIMO-OFDM downlink.

preprint2012arXiv

Per-antenna Constant Envelope Precoding for Large Multi-User MIMO Systems

We consider the multi-user MIMO broadcast channel with $M$ single-antenna users and $N$ transmit antennas under the constraint that each antenna emits signals having constant envelope (CE). The motivation for this is that CE signals facilitate the use of power-efficient RF power amplifiers. Analytical and numerical results show that, under certain mild conditions on the channel gains, for a fixed $M$, array gain is achievable even under the stringent per-antenna CE constraint (essentially, for a fixed $M$, at sufficiently large $N$ the total transmitted power can be reduced with increasing $N$ while maintaining a fixed information rate to each user). Simulations for the i.i.d. Rayleigh fading channel show that the total transmit power can be reduced linearly with increasing $N$ (i.e., an O(N) array gain). We also propose a precoding scheme which finds near-optimal CE signals to be transmitted, and has O(MN) complexity. Also, in terms of the total transmit power required to achieve a fixed desired information sum-rate, despite the stringent per-antenna CE constraint, the proposed CE precoding scheme performs close to the sum-capacity achieving scheme for an average-only total transmit power constrained channel.

preprint2012arXiv

Scaling up MIMO: Opportunities and Challenges with Very Large Arrays

This paper surveys recent advances in the area of very large MIMO systems. With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.

preprint2012arXiv

Single-User Beamforming in Large-Scale MISO Systems with Per-Antenna Constant-Envelope Constraints: The Doughnut Channel

Large antenna arrays at the base station (BS) has recently been shown to achieve remarkable intra-cell interference suppression at low complexity. However, building large arrays in practice, would require the use of power-efficient RF amplifiers, which generally have poor linearity characteristics and hence would require the use of input signals with a very small peak-to-average power ratio (PAPR). In this paper, we consider the single-user Multiple-Input Single-Output (MISO) downlink channel for the case where the BS antennas are constrained to transmit signals having constant envelope (CE). We show that, with per-antenna CE transmission the effective channel seen by the receiver is a SISO AWGN channel with its input constrained to lie in a doughnut-shaped region. For single-path direct-line-of-sight (DLOS) and general i.i.d. fading channels, analysis of the effective doughnut channel shows that under a per-antenna CE input constraint, i) compared to an average-only total transmit power constrained MISO channel, the extra total transmit power required to achieve a desired information rate is small and bounded, ii) with N base station antennas an O(N) array power gain is achievable, and iii) for a desired information rate, using power-efficient amplifiers with CE inputs would require significantly less total transmit power when compared to using highly linear (power-inefficient) amplifiers with high PAPR inputs.

preprint2012arXiv

Uplink Performance Analysis of Multicell MU-MIMO Systems with ZF Receivers

We consider the uplink of a multicell multiuser multiple-input multiple-output system where the channel experiences both small and large-scale fading. The data detection is done by using the linear zero-forcing technique, assuming the base station (BS) has perfect channel state information. We derive new, exact closed-form expressions for the uplink rate, symbol error rate, and outage probability per user, as well as a lower bound on the achievable rate. This bound is very tight and becomes exact in the large-number-of-antennas limit. We further study the asymptotic system performance in the regimes of high signal-to-noise ratio (SNR), large number of antennas, and large number of users per cell. We show that at high SNRs, the system is interference-limited and hence, we cannot improve the system performance by increasing the transmit power of each user. Instead, by increasing the number of BS antennas, the effects of interference and noise can be reduced, thereby improving the system performance. We demonstrate that, with very large antenna arrays at the BS, the transmit power of each user can be made inversely proportional to the number of BS antennas while maintaining a desired quality-of-service. Numerical results are presented to verify our analysis.

preprint2011arXiv

Constant Envelope Precoding for Power-Efficient Downlink Wireless Communication in Multi-User MIMO Systems Using Large Antenna Arrays

We consider downlink cellular multi-user communication between a base station (BS) having N antennas and M single-antenna users, i.e., an N X M Gaussian Broadcast Channel (GBC). Under an average only total transmit power constraint (APC), large antenna arrays at the BS (having tens to a few hundred antennas) have been recently shown to achieve remarkable multi-user interference (MUI) suppression with simple precoding techniques. However, building large arrays in practice, would require cheap/power-efficient Radio-Frequency(RF) electronic components. The type of transmitted signal that facilitates the use of most power-efficient RF components is a constant envelope (CE) signal. Under certain mild channel conditions (including i.i.d. fading), we analytically show that, even under the stringent per-antenna CE transmission constraint (compared to APC), MUI suppression can still be achieved with large antenna arrays. Our analysis also reveals that, with a fixed M and increasing N, the total transmitted power can be reduced while maintaining a constant signal-to-interference-noise-ratio (SINR) level at each user. We also propose a novel low-complexity CE precoding scheme, using which, we confirm our analytical observations for the i.i.d. Rayleigh fading channel, through Monte-Carlo simulations. Simulation of the information sum-rate under the per-antenna CE constraint, shows that, for a fixed M and a fixed desired sum-rate, the required total transmit power decreases linearly with increasing N, i.e., an O(N) array power gain. Also, in terms of the total transmit power required to achieve a fixed desired information sum-rate, despite the stringent per-antenna CE constraint, the proposed CE precoding scheme performs close to the GBC sum-capacity (under APC) achieving scheme.