Catalog footprint

What is connected

37works
18topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

37 published item(s)

preprint2022arXiv

Adam-based Augmented Random Search for Control Policies for Distributed Energy Resource Cyber Attack Mitigation

Volt-VAR and Volt-Watt control functions are mechanisms that are included in distributed energy resource (DER) power electronic inverters to mitigate excessively high or low voltages in distribution systems. In the event that a subset of DER have had their Volt-VAR and Volt-Watt settings compromised as part of a cyber-attack, we propose a mechanism to control the remaining set of non-compromised DER to ameliorate large oscillations in system voltages and large voltage imbalances in real time. To do so, we construct control policies for individual non-compromised DER, directly searching the policy space using an Adam-based augmented random search (ARS). In this paper we show that, compared to previous efforts aimed at training policies for DER cybersecurity using deep reinforcement learning (DRL), the proposed approach is able to learn optimal (and sometimes linear) policies an order of magnitude faster than conventional DRL techniques (e.g., Proximal Policy Optimization).

preprint2022arXiv

Adaptive Control of Distributed Energy Resources for Distribution Grid Voltage Stability

Volt-VAR and Volt-Watt functionality in photovoltaic (PV) smart inverters provide mechanisms to ensure system voltage magnitudes and power factors remain within acceptable limits. However, these control functions can become unstable, introducing oscillations in system voltages when not appropriately configured or maliciously altered during a cyberattack. In the event that Volt-VAR and Volt-Watt control functions in a portion of PV smart inverters in a distribution grid are unstable, the proposed adaptation scheme utilizes the remaining and stably-behaving PV smart inverters and other Distributed Energy Resources to mitigate the effect of the instability. The adaptation mechanism is entirely decentralized, model-free, communication-free, and requires virtually no external configuration. We provide a derivation of the adaptive control approach and validate the algorithm in experiments on the IEEE 37 and 8500 node test feeders.

preprint2022arXiv

Differentially Private $K$-means Clustering Applied to Meter Data Analysis and Synthesis

The proliferation of smart meters has resulted in a large amount of data being generated. It is increasingly apparent that methods are required for allowing a variety of stakeholders to leverage the data in a manner that preserves the privacy of the consumers. The sector is scrambling to define policies, such as the so called `15/15 rule', to respond to the need. However, the current policies fail to adequately guarantee privacy. In this paper, we address the problem of allowing third parties to apply $K$-means clustering, obtaining customer labels and centroids for a set of load time series by applying the framework of differential privacy. We leverage the method to design an algorithm that generates differentially private synthetic load data consistent with the labeled data. We test our algorithm's utility by answering summary statistics such as average daily load profiles for a 2-dimensional synthetic dataset and a real-world power load dataset.

preprint2021arXiv

Federated Block Coordinate Descent Scheme for Learning Global and Personalized Models

In federated learning, models are learned from users' data that are held private in their edge devices, by aggregating them in the service provider's "cloud" to obtain a global model. Such global model is of great commercial value in, e.g., improving the customers' experience. In this paper we focus on two possible areas of improvement of the state of the art. First, we take the difference between user habits into account and propose a quadratic penalty-based formulation, for efficient learning of the global model that allows to personalize local models. Second, we address the latency issue associated with the heterogeneous training time on edge devices, by exploiting a hierarchical structure modeling communication not only between the cloud and edge devices, but also within the cloud. Specifically, we devise a tailored block coordinate descent-based computation scheme, accompanied with communication protocols for both the synchronous and asynchronous cloud settings. We characterize the theoretical convergence rate of the algorithm, and provide a variant that performs empirically better. We also prove that the asynchronous protocol, inspired by multi-agent consensus technique, has the potential for large gains in latency compared to a synchronous setting when the edge-device updates are intermittent. Finally, experimental results are provided that corroborate not only the theory, but also show that the system leads to faster convergence for personalized models on the edge devices, compared to the state of the art.

preprint2020arXiv

Accelerating Incremental Gradient Optimization with Curvature Information

This paper studies an acceleration technique for incremental aggregated gradient ({\sf IAG}) method through the use of \emph{curvature} information for solving strongly convex finite sum optimization problems. These optimization problems of interest arise in large-scale learning applications. Our technique utilizes a curvature-aided gradient tracking step to produce accurate gradient estimates incrementally using Hessian information. We propose and analyze two methods utilizing the new technique, the curvature-aided IAG ({\sf CIAG}) method and the accelerated CIAG ({\sf A-CIAG}) method, which are analogous to gradient method and Nesterov's accelerated gradient method, respectively. Setting $κ$ to be the condition number of the objective function, we prove the $R$ linear convergence rates of $1 - \frac{4c_0 κ}{(κ+1)^2}$ for the {\sf CIAG} method, and $1 - \sqrt{\frac{c_1}{2κ}}$ for the {\sf A-CIAG} method, where $c_0,c_1 \leq 1$ are constants inversely proportional to the distance between the initial point and the optimal solution. When the initial iterate is close to the optimal solution, the $R$ linear convergence rates match with the gradient and accelerated gradient method, albeit {\sf CIAG} and {\sf A-CIAG} operate in an incremental setting with strictly lower computation complexity. Numerical experiments confirm our findings. The source codes used for this paper can be found on \url{http://github.com/hoitowai/ciag/}.

preprint2020arXiv

Integrating Hardware Security into a Blockchain-Based Transactive Energy Platform

This applied research paper introduces a novel framework for integrating hardware security and blockchain functionality with grid-edge devices to establish a distributed cyber-security mechanism that verifies the provenance of messages to and from the devices. Expanding the idea of Two Factor Authentication and Hardware Root of Trust, this work describes the development of a Cryptographic Trust Center(TM) (CTC(TM)) chip integrated into grid-edge devices to create uniform cryptographic key management. Product managers, energy system designers, and security architects can utilize this modular framework as a unified approach to manage distributed devices of various vendors, vintages, and sizes. Results demonstrate the application of CTC(TM) to a blockchain-based Transactive Energy (TE) platform for provisioning of cryptographic keys and improved uniformity of the operational network and data management. This process of configuring, installing, and maintaining keys is described as Eco-Secure Provisioning(TM) (ESP(TM)). Laboratory test results show the approach can resolve several cyber-security gaps in common blockchain frameworks such as Hyperledger Fabric.

preprint2020arXiv

Physical Education and English Language Arts Based K-12 Engineering Outreach in Software Defined Networking (Extended Version)

K-12 engineering outreach has typically focused on elementary electrical and mechanical engineering or robot experiments integrated in science or math classes. In contrast, we propose a novel outreach program focusing on communication network principles that enable the ubiquitous web and smart-phone applications. We design outreach activities that illustrate the communication network principles through activities and team competitions in physical education (PE) as well as story writing and cartooning in English Language Arts (ELA) classes. The PE activities cover the principles of store-and-forward packet switching, Hypertext Transfer Protocol (HTTP) web page download, connection establishment in cellular wireless networks, as well as packet routing in Software-Defined Networking (SDN). The proposed outreach program has been formatively evaluated by K-12 teachers. A survey for the evaluation of the impact of the outreach program on the student perceptions, specifically, the students' interest, self-efficacy, utility, and negative stereotype perceptions towards communication network engineering, is also presented.

preprint2016arXiv

Continuous-time Marginal Pricing of Power Trajectories in Power Systems

In this paper we formulate of the Economic Dispatch (ED) problem in Power Systems in continuous time and include in it ramping constraints to derive an expression of the price that reflects some important inter-temporal constraints of the power units. The motivation for looking at this problem is the scarcity of ramping resources and their increasing importance motivated by the variability of power resources, particularly due to the addition of solar power, which exacerbates the need of fast ramping units in the early morning and early evening hours. We show that the solution for the marginal price can be found through Euler-Lagrange equations and we argue that this price signal better reflects the market value of power in the presence of significant ramps in net-load.

preprint2016arXiv

Distributed Estimation of the Operating State of a Single-Bus DC MicroGrid without an External Communication Interface

We propose a decentralized Maximum Likelihood solution for estimating the stochastic renewable power generation and demand in single bus Direct Current (DC) MicroGrids (MGs), with high penetration of droop controlled power electronic converters. The solution relies on the fact that the primary control parameters are set in accordance with the local power generation status of the generators. Therefore, the steady state voltage is inherently dependent on the generation capacities and the load, through a non-linear parametric model, which can be estimated. To have a well conditioned estimation problem, our solution avoids the use of an external communication interface and utilizes controlled voltage disturbances to perform distributed training. Using this tool, we develop an efficient, decentralized Maximum Likelihood Estimator (MLE) and formulate the sufficient condition for the existence of the globally optimal solution. The numerical results illustrate the promising performance of our MLE algorithm.

preprint2016arXiv

Dynamic Formulation for Multistage Stochastic Unit Commitment Problem

As net-load becomes less predictable there is a lot of pressure in changing decision models for power markets such that they account explicitly for future scenarios in making commitment decisions. This paper proposes to make commitment decisions using a dynamic multistage stochastic unit commitment formulation over a cohesive horizon that leverages a state-space model for the commitment variables. We study the problem of constructing scenario tree approximations for both original and residual stochastic process and evaluate our algorithms on scenario tree libraries derived from real net-load data.

preprint2016arXiv

Modeling Group Dynamics Using Probabilistic Tensor Decompositions

We propose a probabilistic modeling framework for learning the dynamic patterns in the collective behaviors of social agents and developing profiles for different behavioral groups, using data collected from multiple information sources. The proposed model is based on a hierarchical Bayesian process, in which each observation is a finite mixture of an set of latent groups and the mixture proportions (i.e., group probabilities) are drawn randomly. Each group is associated with some distributions over a finite set of outcomes. Moreover, as time evolves, the structure of these groups also changes; we model the change in the group structure by a hidden Markov model (HMM) with a fixed transition probability. We present an efficient inference method based on tensor decompositions and the expectation-maximization (EM) algorithm for parameter estimation.

preprint2016arXiv

Optimal Pricing to Manage Electric Vehicles in Coupled Power and Transportation Networks

We study the system-level effects of the introduction of large populations of Electric Vehicles on the power and transportation networks. We assume that each EV owner solves a decision problem to pick a cost-minimizing charge and travel plan. This individual decision takes into account traffic congestion in the transportation network, affecting travel times, as well as as congestion in the power grid, resulting in spatial variations in electricity prices for battery charging. We show that this decision problem is equivalent to finding the shortest path on an "extended" transportation graph, with virtual arcs that represent charging options. Using this extended graph, we study the collective effects of a large number of EV owners individually solving this path planning problem. We propose a scheme in which independent power and transportation system operators can collaborate to manage each network towards a socially optimum operating point while keeping the operational data of each system private. We further study the optimal reserve capacity requirements for pricing in the absence of such collaboration. We showcase numerically that a lack of attention to interdependencies between the two infrastructures can have adverse operational effects.

preprint2016arXiv

RIDS: Robust Identification of Sparse Gene Regulatory Networks from Perturbation Experiments

Reconstructing the causal network in a complex dynamical system plays a crucial role in many applications, from sub-cellular biology to economic systems. Here we focus on inferring gene regulation networks (GRNs) from perturbation or gene deletion experiments. Despite their scientific merit, such perturbation experiments are not often used for such inference due to their costly experimental procedure, requiring significant resources to complete the measurement of every single experiment. To overcome this challenge, we develop the Robust IDentification of Sparse networks (RIDS) method that reconstructs the GRN from a small number of perturbation experiments. Our method uses the gene expression data observed in each experiment and translates that into a steady state condition of the system's nonlinear interaction dynamics. Applying a sparse optimization criterion, we are able to extract the parameters of the underlying weighted network, even from very few experiments. In fact, we demonstrate analytically that, under certain conditions, the GRN can be perfectly reconstructed using $K = Ω(d_{max})$ perturbation experiments, where $d_{max}$ is the maximum in-degree of the GRN, a small value for realistic sparse networks, indicating that RIDS can achieve high performance with a scalable number of experiments. We test our method on both synthetic and experimental data extracted from the DREAM5 network inference challenge. We show that the RIDS achieves superior performance compared to the state-of-the-art methods, while requiring as few as ~60% less experimental data. Moreover, as opposed to almost all competing methods, RIDS allows us to infer the directionality of the GRN links, allowing us to infer empirical GRNs, without relying on the commonly provided list of transcription factors.

preprint2015arXiv

The Social System Identification Problem

The focus of this paper is modeling what we call a Social Radar, i.e. a method to estimate the relative influence between social agents, by sampling their opinions and as they evolve, after injecting in the network stubborn agents. The stubborn agents opinion is not influenced by the peers they seek to sway, and their opinion bias is the known input to the social network system. The novelty is in the model presented to probe a social network and the solution of the associated regression problem. The model allows to map the observed opinion onto system equations that can be used to infer the social graph and the amount of trust that characterizes the links.

preprint2014arXiv

Capturing Aggregate Flexibility in Demand Response

Flexibility in electric power consumption can be leveraged by Demand Response (DR) programs. The goal of this paper is to systematically capture the inherent aggregate flexibility of a population of appliances. We do so by clustering individual loads based on their characteristics and service constraints. We highlight the challenges associated with learning the customer response to economic incentives while applying demand side management to heterogeneous appliances. We also develop a framework to quantify customer privacy in direct load scheduling programs.

preprint2014arXiv

Generation bidding game with flexible demand

For a simple model of price-responsive demand, we consider a deregulated electricity marketplace wherein the grid (ISO, retailer-distributor) accepts bids per-unit supply from generators (simplified herein neither to consider start-up/ramp-up expenses nor day-ahead or shorter-term load following) which are then averaged (by supply allocations via an economic dispatch) to a common "clearing" price borne by customers (irrespective of variations in transmission/distribution or generation prices), i.e., the ISO does not compensate generators based on their marginal costs. Rather, the ISO provides sufficient information for generators to sensibly adjust their bids. Notwithstanding our idealizations, the dispatch dynamics are complex. For a simple benchmark power system, we find a price-symmetric Nash equilibrium through numerical experiments.

preprint2014arXiv

Scalable and Anonymous Modeling of Large Populations of Flexible Appliances

To respond to volatility and congestion in the power grid, demand response (DR) mechanisms allow for shaping the load compared to a base load profile. When tapping on a large population of heterogeneous appliances as a DR resource, the challenge is in modeling the dimensions available for control. Such models need to strike the right balance between accuracy of the model and tractability. The goal of this paper is to provide a medium-grained stochastic hybrid model to represent a population of appliances that belong to two classes: deferrable or thermostatically controlled loads. We preserve quantized information regarding individual load constraints, while discarding information about the identity of appliance owners. The advantages of our proposed population model are 1) it allows us to model and control load in a scalable fashion, useful for ex-ante planning by an aggregator or for real-time load control; 2) it allows for the preservation of the privacy of end-use customers that own submetered or directly controlled appliances.

preprint2014arXiv

The Cognitive Compressive Sensing Problem

In the Cognitive Compressive Sensing (CCS) problem, a Cognitive Receiver (CR) seeks to optimize the reward obtained by sensing an underlying $N$ dimensional random vector, by collecting at most $K$ arbitrary projections of it. The $N$ components of the latent vector represent sub-channels states, that change dynamically from "busy" to "idle" and vice versa, as a Markov chain that is biased towards producing sparse vectors. To identify the optimal strategy we formulate the Multi-Armed Bandit Compressive Sensing (MAB-CS) problem, generalizing the popular Cognitive Spectrum Sensing model, in which the CR can sense $K$ out of the $N$ sub-channels, as well as the typical static setting of Compressive Sensing, in which the CR observes $K$ linear combinations of the $N$ dimensional sparse vector. The CR opportunistic choice of the sensing matrix should balance the desire of revealing the state of as many dimensions of the latent vector as possible, while not exceeding the limits beyond which the vector support is no longer uniquely identifiable.

preprint2013arXiv

A Framework for Phasor Measurement Placement in Hybrid State Estimation via Gauss-Newton

In this paper, we study the placement of Phasor Measurement Units (PMU) for enhancing hybrid state estimation via the traditional Gauss-Newton method, which uses measurements from both PMU devices and Supervisory Control and Data Acquisition (SCADA) systems. To compare the impact of PMU placements, we introduce a useful metric which accounts for three important requirements in power system state estimation: {\it convergence}, {\it observability} and {\it performance} (COP). Our COP metric can be used to evaluate the estimation performance and numerical stability of the state estimator, which is later used to optimize the PMU locations. In particular, we cast the optimal placement problem in a unified formulation as a semi-definite program (SDP) with integer variables and constraints that guarantee observability in case of measurements loss. Last but not least, we propose a relaxation scheme of the original integer-constrained SDP with randomization techniques, which closely approximates the optimum deployment. Simulations of the IEEE-30 and 118 systems corroborate our analysis, showing that the proposed scheme improves the convergence of the state estimator, while maintaining optimal asymptotic performance.

preprint2013arXiv

Clustering Consumption in Queues: A Scalable Model for Electric Vehicle Scheduling

In this paper, we introduce a scalable model for the aggregate electricity demand of a fleet of electric vehicles, which can provide the right balance between model simplicity and accuracy. The model is based on classification of tasks with similar energy consumption characteristics into a finite number of clusters. The aggregator responsible for scheduling the charge of the vehicles has two goals: 1) to provide a hard QoS guarantee to the vehicles at the lowest possible cost; 2) to offer load or generation following services to the wholesale market. In order to achieve these goals, we combine the scalable demand model we propose with two scheduling mechanisms, a near-optimal and a heuristic technique. The performance of the two mechanisms is compared under a realistic setting in our numerical experiments.

preprint2013arXiv

Compressive Link Acquisition in Multiuser Communications

An important receiver operation is to detect the presence specific preamble signals with unknown delays in the presence of scattering, Doppler effects and carrier offsets. This task, referred to as "link acquisition", is typically a sequential search over the transmitted signal space. Recently, many authors have suggested applying sparse recovery algorithms in the context of similar estimation or detection problems. These works typically focus on the benefits of sparse recovery, but not generally on the cost brought by compressive sensing. Thus, our goal is to examine the trade-off in complexity and performance that is possible when using sparse recovery. To do so, we propose a sequential sparsity-aware compressive sampling (C-SA) acquisition scheme, where a compressive multi-channel sampling (CMS) front-end is followed by a sparsity regularized likelihood ratio test (SR-LRT) module. The proposed C-SA acquisition scheme borrows insights from the models studied in the context of sub-Nyquist sampling, where a minimal amount of samples is captured to reconstruct signals with Finite Rate of Innovation (FRI). In particular, we propose an A/D conversion front-end that maximizes a well-known probability divergence measure, the average Kullback-Leibler distance, of all the hypotheses of the SR-LRT performed on the samples. We compare the proposed acquisition scheme vis-à-vis conventional alternatives with relatively low computational cost, such as the Matched Filter (MF), in terms of performance and complexity.

preprint2013arXiv

Convergence and Applications of a Gossip-based Gauss-Newton Algorithm

The Gauss-Newton algorithm is a popular and efficient centralized method for solving non-linear least squares problems. In this paper, we propose a multi-agent distributed version of this algorithm, named Gossip-based Gauss-Newton (GGN) algorithm, which can be applied in general problems with non-convex objectives. Furthermore, we analyze and present sufficient conditions for its convergence and show numerically that the GGN algorithm achieves performance comparable to the centralized algorithm, with graceful degradation in case of network failures. More importantly, the GGN algorithm provides significant performance gains compared to other distributed first order methods.

preprint2013arXiv

Distributed Constrained Optimization by Consensus-Based Primal-Dual Perturbation Method

Various distributed optimization methods have been developed for solving problems which have simple local constraint sets and whose objective function is the sum of local cost functions of distributed agents in a network. Motivated by emerging applications in smart grid and distributed sparse regression, this paper studies distributed optimization methods for solving general problems which have a coupled global cost function and have inequality constraints. We consider a network scenario where each agent has no global knowledge and can access only its local mapping and constraint functions. To solve this problem in a distributed manner, we propose a consensus-based distributed primal-dual perturbation (PDP) algorithm. In the algorithm, agents employ the average consensus technique to estimate the global cost and constraint functions via exchanging messages with neighbors, and meanwhile use a local primal-dual perturbed subgradient method to approach a global optimum. The proposed PDP method not only can handle smooth inequality constraints but also non-smooth constraints such as some sparsity promoting constraints arising in sparse optimization. We prove that the proposed PDP algorithm converges to an optimal primal-dual solution of the original problem, under standard problem and network assumptions. Numerical results illustrating the performance of the proposed algorithm for a distributed demand response control problem in smart grid are also presented.

preprint2013arXiv

Incentive Design for Direct Load Control Programs

We study the problem of optimal incentive design for voluntary participation of electricity customers in a Direct Load Scheduling (DLS) program, a new form of Direct Load Control (DLC) based on a three way communication protocol between customers, embedded controls in flexible appliances, and the central entity in charge of the program. Participation decisions are made in real-time on an event-based basis, with every customer that needs to use a flexible appliance considering whether to join the program given current incentives. Customers have different interpretations of the level of risk associated with committing to pass over the control over the consumption schedule of their devices to an operator, and these risk levels are only privately known. The operator maximizes his expected profit of operating the DLS program by posting the right participation incentives for different appliance types, in a publicly available and dynamically updated table. Customers are then faced with the dynamic decision making problem of whether to take the incentives and participate or not. We define an optimization framework to determine the profit-maximizing incentives for the operator. In doing so, we also investigate the utility that the operator expects to gain from recruiting different types of devices. These utilities also provide an upper-bound on the benefits that can be attained from any type of demand response program.

preprint2013arXiv

Real-Time Power Balancing via Decentralized Coordinated Home Energy Scheduling

It is anticipated that an uncoordinated operation of individual home energy management (HEM) systems in a neighborhood would have a rebound effect on the aggregate demand profile. To address this issue, this paper proposes a coordinated home energy management (CoHEM) architecture in which distributed HEM units collaborate with each other in order to keep the demand and supply balanced in their neighborhood. Assuming the energy requests by customers are random in time, we formulate the proposed CoHEM design as a multi-stage stochastic optimization problem. We propose novel models to describe the deferrable appliance load (e.g., Plug-in (Hybrid) Electric Vehicles (PHEV)), and apply approximation and decomposition techniques to handle the considered design problem in a decentralized fashion. The developed decentralized CoHEM algorithm allow the customers to locally compute their scheduling solutions using domestic user information and with message exchange between their neighbors only. Extensive simulation results demonstrate that the proposed CoHEM architecture can effectively improve real-time power balancing. Extensions to joint power procurement and real-time CoHEM scheduling are also presented.

preprint2013arXiv

Robust Decentralized State Estimation and Tracking for Power Systems via Network Gossiping

This paper proposes a fully decentralized adaptive re-weighted state estimation (DARSE) scheme for power systems via network gossiping. The enabling technique is the proposed Gossip-based Gauss-Newton (GGN) algorithm, which allows to harness the computation capability of each area (i.e. a database server that accrues data from local sensors) to collaboratively solve for an accurate global state. The DARSE scheme mitigates the influence of bad data by updating their error variances online and re-weighting their contributions adaptively for state estimation. Thus, the global state can be estimated and tracked robustly using near-neighbor communications in each area. Compared to other distributed state estimation techniques, our communication model is flexible with respect to reconfigurations and resilient to random failures as long as the communication network is connected. Furthermore, we prove that the Jacobian of the power flow equations satisfies the Lipschitz condition that is essential for the GGN algorithm to converge to the desired solution. Simulations of the IEEE-118 system show that the DARSE scheme can estimate and track online the global power system state accurately, and degrades gracefully when there are random failures and bad data.

preprint2013arXiv

Spatial-Spectral Sensing using the Shrink & Match Algorithm in Asynchronous MIMO OFDM Signals

Spectrum sensing (SS) in cognitive radio (CR) systems is of paramount importance to approach the capacity limits for the Secondary Users (SU), while ensuring the undisturbed transmission of Primary Users (PU). In this paper, we formulate a cognitive radio (CR)systems spectrum sensing (SS) problem in which Secondary Users (SU), with multiple receive antennae, sense a channel shared among multiple asynchronous Primary Users (PU) transmitting Multiple Input Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) signals. The method we propose to estimate the opportunities available to the SUs combines advances in array processing and compressed channel sensing, and leverages on both the so called "shrinkage method" as well as on an over-complete basis expansion of the PUs interference covariance matrix to detect the occupied and idle angles of arrivals and subcarriers. The covariance "shrinkage" step and the sparse modeling step that follows, allow to resolve ambiguities that arise when the observations are scarce, reducing the sensing cost for the SU, thereby increasing its spectrum exploitation capabilities compared to competing sensing methods. Simulations corroborate that exploiting the sparse representation of the covariance matrix in CR sensing resolves the spatial and frequency spectrum of the sources.

preprint2012arXiv

Coordinated Home Energy Management for Real-Time Power Balancing

This paper proposes a coordinated home energy management system (HEMS) architecture where the distributed residential units cooperate with each other to achieve real-time power balancing. The economic benefits for the retailer and incentives for the customers to participate in the proposed coordinated HEMS program are given. We formulate the coordinated HEMS design problem as a dynamic programming (DP) and use approximate DP approaches to efficiently handle the design problem. A distributed implementation algorithm based on the convex optimization based dual decomposition technique is also presented. Our focus in the current paper is on the deferrable appliances, such as Plug-in (Hybrid) Electric Vehicles (PHEV), in view of their higher impact on the grid stability. Simulation results shows that the proposed coordinated HEMS architecture can efficiently improve the real-time power balancing.

preprint2012arXiv

Discrete Dithered Desynchronization

This paper introduces the Discrete Dithered Desynchronization (D3sync) algorithm which is a decentralized Time Division Multiple Access (TDMA) technique in which a set of network nodes computes iteratively a conflict-free schedule so that each node obtains a portion of a frame that is an integer multiple of a fixed slot size. The algorithm is inspired by the dynamics of Pulse Coupled Oscillators (PCO), but unlike its predecessors that divide arbitrarily the frame among the nodes in the network, the D3sync allocates discrete resources among the network nodes. Our paper proves the convergence of the D3sync algorithm and gives an upper bound on the convergence time of the algorithm.

preprint2012arXiv

From Packet to Power Switching: Digital Direct Load Scheduling

At present, the power grid has tight control over its dispatchable generation capacity but a very coarse control on the demand. Energy consumers are shielded from making price-aware decisions, which degrades the efficiency of the market. This state of affairs tends to favor fossil fuel generation over renewable sources. Because of the technological difficulties of storing electric energy, the quest for mechanisms that would make the demand for electricity controllable on a day-to-day basis is gaining prominence. The goal of this paper is to provide one such mechanisms, which we call Digital Direct Load Scheduling (DDLS). DDLS is a direct load control mechanism in which we unbundle individual requests for energy and digitize them so that they can be automatically scheduled in a cellular architecture. Specifically, rather than storing energy or interrupting the job of appliances, we choose to hold requests for energy in queues and optimize the service time of individual appliances belonging to a broad class which we refer to as "deferrable loads". The function of each neighborhood scheduler is to optimize the time at which these appliances start to function. This process is intended to shape the aggregate load profile of the neighborhood so as to optimize an objective function which incorporates the spot price of energy, and also allows distributed energy resources to supply part of the generation dynamically.

preprint2011arXiv

Discrete-Time Block Models for Transmission Line Channels: Static and Doubly Selective Cases

Most methodologies for modeling Transmission Line (TL) based channels define the input-output relationship in the frequency domain (FD) and handle the TL resorting to a two-port network (2PN) formalism. These techniques have not yet been formally mapped into a discrete-time (DT) block model, which is useful to simulate and estimate the channel response as well as to design optimal precoding strategies. TL methods also fall short when they are applied to Time Varying (TV) systems, such as the power line channel. The objective of this paper is to establish if and how one can introduce a DT block model for the Power Line Channel. We prove that it is possible to use Lifting and Trailing Zeros (L&TZ) techniques to derive a DT block model that maps the TL-based input-output description directly in the time domain (TD) block channel model. More specifically, we find an interesting relationship between the elements of an ABCD matrix, defined in the FD, and filtering kernels that allow an elegant representation of the channel in the TD. The same formalism is valid for both the Linear Time Invariant (LTI) and the Linear TV (LTV) cases, and bridges communications and signal processing methodologies with circuits and systems analysis tools.

preprint2011arXiv

For the Grid and Through the Grid: The Role of Power Line Communications in the Smart Grid

Is Power Line Communications (PLC) a good candidate for Smart Grid applications? The objective of this paper is to address this important question. To do so we provide an overview of what PLC can deliver today by surveying its history and describing the most recent technological advances in the area. We then address Smart Grid applications as instances of sensor networking and network control problems and discuss the main conclusion one can draw from the literature on these subjects. The application scenario of PLC within the Smart Grid is then analyzed in detail. Since a necessary ingredient of network planning is modeling, we also discuss two aspects of engineering modeling that relate to our question. The first aspect is modeling the PLC channel through fading models. The second aspect we review is the Smart Grid control and traffic modeling problem which allows us to achieve a better understanding of the communications requirements. Finally, this paper reports recent studies on the electrical and topological properties of a sample power distribution network. Power grid topological studies are very important for PLC networking as the power grid is not only the information source \textit{but also} the information delivery system - a unique feature when PLC is used for the Smart Grid.

preprint2011arXiv

GPS Signal Acquisition via Compressive Multichannel Sampling

In this paper, we propose an efficient acquisition scheme for GPS receivers. It is shown that GPS signals can be effectively sampled and detected using a bank of randomized correlators with much fewer chip-matched filters than those used in existing GPS signal acquisition algorithms. The latter use correlations with all possible shifted replicas of the satellite-specific C/A code and an exhaustive search for peaking signals over the delay-Doppler space. Our scheme is based on the recently proposed analog compressed sensing framework, and consists of a multichannel sampling structure with far fewer correlators. The compressive multichannel sampler outputs are linear combinations of a vector whose support tends to be sparse; by detecting its support one can identify the strongest satellite signals in the field of view and pinpoint the correct code-phase and Doppler shifts for finer resolution during tracking. The analysis in this paper demonstrates that GPS signals can be detected and acquired via the proposed structure at a lower cost in terms of number of correlations that need to be computed in the coarse acquisition phase, which in current GPS technology scales like the product of the number of all possible delays and Doppler shifts. In contrast, the required number of correlators in our compressive multichannel scheme scales as the number of satellites in the field of view of the device times the logarithm of number of delay-Doppler bins explored, as is typical for compressed sensing methods.

preprint2011arXiv

STiCMAC: A MAC Protocol for Robust Space-Time Coding in Cooperative Wireless LANs

Relay-assisted cooperative wireless communication has been shown to have significant performance gains over the legacy direct transmission scheme. Compared with single relay based cooperation schemes, utilizing multiple relays further improves the reliability and rate of transmissions. Distributed space-time coding (DSTC), as one of the schemes to utilize multiple relays, requires tight coordination between relays and does not perform well in a distributed environment with mobility. In this paper, a cooperative medium access control (MAC) layer protocol, called \emph{STiCMAC}, is designed to allow multiple relays to transmit at the same time in an IEEE 802.11 network. The transmission is based on a novel DSTC scheme called \emph{randomized distributed space-time coding} (\emph{R-DSTC}), which requires minimum coordination. Unlike conventional cooperation schemes that pick nodes with good links, \emph{STiCMAC} picks a \emph{transmission mode} that could most improve the end-to-end data rate. Any station that correctly receives from the source can act as a relay and participate in forwarding. The MAC protocol is implemented in a fully decentralized manner and is able to opportunistically recruit relays on the fly, thus making it \emph{robust} to channel variations and user mobility. Simulation results show that the network capacity and delay performance are greatly improved, especially in a mobile environment.

preprint2011arXiv

Transmitting important bits and sailing high radio waves: a decentralized cross-layer approach to cooperative video transmission

We investigate the impact of cooperative relaying on uplink and downlink multi-user (MU) wireless video transmissions. The objective is to maximize the long-term sum of utilities across the video terminals in a decentralized fashion, by jointly optimizing the packet scheduling, the resource allocation, and the cooperation decisions, under the assumption that some nodes are willing to act as cooperative relays. A pricing-based distributed resource allocation framework is adopted, where the price reflects the expected future congestion in the network. Specifically, we formulate the wireless video transmission problem as an MU Markov decision process (MDP) that explicitly considers the cooperation at the physical layer and the medium access control sublayer, the video users' heterogeneous traffic characteristics, the dynamically varying network conditions, and the coupling among the users' transmission strategies across time due to the shared wireless resource. Although MDPs notoriously suffer from the curse of dimensionality, our study shows that, with appropriate simplications and approximations, the complexity of the MU-MDP can be significantly mitigated. Our simulation results demonstrate that integrating cooperative decisions into the MU-MDP optimization can increase the resource price in networks that only support low transmission rates and can decrease the price in networks that support high transmission rates. Additionally, our results show that cooperation allows users with feeble direct signals to achieve improvements in video quality on the order of 5-10 dB peak signal-to-noise ratio (PSNR), with less than 0.8 dB quality loss by users with strong direct signals, and with a moderate increase in total network energy consumption that is significantly less than the energy that a distant node would require to achieve an equivalent PSNR without exploiting cooperative diversity.

preprint2010arXiv

Fast and Power Efficient Sensor Arbitration: Physical Layer Collision Recovery of Passive RFID Tags

This work concerns physical layer collision recovery for cheap sensors with allowed variations in frequency and delay of their communications. The work is presented as a generic, communication theoretic framework and demonstrated using UHF RFID tag technology. Previous work in this area has not provided recovery for more than two tags, which is shown to be possible in this work. Also presented is a novel mathematical model of the tag signal, incorporating the allowed variations in frequency and delay. The main motivation is seen in the observation that random variations in frequency and delay make the collided signals of different tags separable. The collision recovery is done by estimating the sensor specific variation in frequency and delay and using these estimates in a successive interference cancellation algorithm and a maximum likelihood sequence decoder, to iteratively reconstruct a sensor signal and remove it from the received signal. Numerical simulations show that the estimates and proposed algorithm are effective in recovering collisions. The proposed algorithm is then incorporated into a numerical simulation of the Qprotocol for UHF RFID tags and is shown to be effective in providing fast and power efficient sensor arbitration.

preprint2010arXiv

Gossip Algorithms for Distributed Signal Processing

Gossip algorithms are attractive for in-network processing in sensor networks because they do not require any specialized routing, there is no bottleneck or single point of failure, and they are robust to unreliable wireless network conditions. Recently, there has been a surge of activity in the computer science, control, signal processing, and information theory communities, developing faster and more robust gossip algorithms and deriving theoretical performance guarantees. This article presents an overview of recent work in the area. We describe convergence rate results, which are related to the number of transmitted messages and thus the amount of energy consumed in the network for gossiping. We discuss issues related to gossiping over wireless links, including the effects of quantization and noise, and we illustrate the use of gossip algorithms for canonical signal processing tasks including distributed estimation, source localization, and compression.