Source author record

Alexey V. Ustinov

Alexey V. Ustinov appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

36works
8topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

36 published item(s)

preprint2022arXiv

Cavity-QED of a quantum metamaterial with tunable disorder

We explore experimentally a quantum metamaterial based on a superconducting chip with 25 frequency-tunable transmon qubits coupled to a common coplanar resonator. The collective bright and dark modes are probed via the microwave response, i.e., by measuring the transmission amplitude of an external microwave signal. All qubits have individual control and readout lines. Their frequency tunability allows to change the number N of resonantly coupled qubits and also to introduce a disorder in their excitation frequencies with preassigned distributions. While increasing N, we demonstrate the expected $N^{1/2}$ scaling law for the energy gap (Rabi splitting) between bright modes around the cavity frequency. By introducing a controllable disorder and averaging the transmission amplitude over a large number of realizations, we demonstrate a decay of mesoscopic fluctuations which mimics an approach towards the thermodynamic limit. The collective bright states survive in the presence of disorder when the strength of individual qubit coupling to the cavity dominates over the disorder strength.

preprint2022arXiv

Probing defect densities at the edges and inside Josephson junctions of superconducting qubits

Tunneling defects in disordered materials form spurious two-level systems which are a major source of decoherence for micro-fabricated quantum devices. For superconducting qubits, defects in tunnel barriers of submicrometer-sized Josephson junctions couple strongest to the qubit, which necessitates optimization of the junction fabrication to mitigate defect formation. Here, we investigate whether defects appear predominantly at the edges or deep within the amorphous tunnel barrier of a junction. For this, we compare defect densities in differently shaped Al/AlO$_x$/Al Josephson junctions that are part of a Transmon qubit. We observe that the number of detectable junction-defects is proportional to the junction area, and does not significantly scale with the junction's circumference, which proposes that defects are evenly distributed inside the tunnel barrier. Moreover, we find very similar defect densities in thermally grown tunnel barriers that were formed either directly after the base electrode was deposited, or in a separate deposition step after removal of native oxide by Argon ion milling.

preprint2021arXiv

Fluxons in high-impedance long Josephson junctions

The dynamics of fluxons in long Josephson junctions is a well-known example of soliton physics and allows for studying highly nonlinear relativistic electrodynamics on a microscopic scale. Such fluxons are supercurrent vortices that can be accelerated by a bias current up to the Swihart velocity, which is the characteristic velocity of electromagnetic waves in the junction. We experimentally demonstrate slowing down relativistic fluxons in Josephson junctions whose bulk superconducting electrodes are replaced by thin films of a high kinetic inductance superconductor. Here, the amount of magnetic flux carried by each supercurrent vortex is significantly smaller than the magnetic flux quantum $ Φ_0 $. Our data show that the Swihart velocity is reduced by about one order of magnitude compared to conventional long Josephson junctions. At the same time, the characteristic impedance is increased by an order of magnitude, which makes these junctions suitable for a variety of applications in superconducting electronics.

preprint2021arXiv

Waveguide Bandgap Engineering with an Array of Superconducting Qubits

Waveguide quantum electrodynamics offers a wide range of possibilities to effectively engineer interactions between artificial atoms via a one-dimensional open waveguide. While these interactions have been experimentally studied in the few qubit limit, the collective properties of such systems for larger arrays of qubits in a metamaterial configuration has so far not been addressed. Here, we experimentally study a metamaterial made of eight superconducting transmon qubits with local frequency control coupled to the mode continuum of a waveguide. By consecutively tuning the qubits to a common resonance frequency we observe the formation of super- and subradiant states, as well as the emergence of a polaritonic bandgap. Making use of the qubits quantum nonlinearity, we demonstrate control over the latter by inducing a transparency window in the bandgap region of the ensemble. The circuit of this work extends experiments with one and two qubits towards a full-blown quantum metamaterial, thus paving the way for large-scale applications in superconducting waveguide quantum electrodynamics.

preprint2020arXiv

Amplitude and frequency sensing of microwave fields with a superconducting transmon qudit

Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the ac Stark shifts of higher transmon levels. In our time-resolved measurements we employ Ramsey fringes, allowing us to detect the amplitude of the systems transfer function over a range of several hundreds of MHz with an energy sensitivity on the order of $10^{-4}$. Combined with similar measurements for the phase of the transfer function, our sensing method can facilitate pulse correction for high fidelity quantum gates in superconducting circuits. Additionally, the potential to characterize arbitrary microwave fields promotes applications in related areas of research, such as quantum optics or hybrid microwave systems including photonic, mechanical or magnonic subsystems.

preprint2020arXiv

Insulating, metallic and superconducting behavior in a single nanowire

In systems with reduced dimensions quantum fluctuations have a strong influence on the electronic conduction, even at very low temperature. In superconductors this is especially interesting, since the coherent state of the superconducting electrons is strongly interacting with these fluctuations and therefore is a sensitive tool to study them. In this paper, we report on comprehensive measurements of superconducting nanowires in the quantum phase slip regime. Using an intrinsic electromigration process, we have developed a method to lower the resistance of lithographically fabricated highly resistive nanowires in situ and in small consecutive steps. At low temperature we observe critical (Coulomb) blockade voltages and superconducting critical currents, depending on the nanowire's normal-state resistance, in good agreement with theoretical models. Between these two regimes, we find a continuous transition displaying a nonlinear metallic-like behavior. The reported intrinsic electromigration technique is not limited to low temperatures as we find a similar change in resistance that spans over three orders of magnitude also at room temperature. Aside from superconducting quantum circuits, such a technique to reduce the resistance may also have applications in modern electronic circuits.

preprint2020arXiv

Probing the Tavis-Cummings level splitting with intermediate-scale superconducting circuits

We demonstrate the local control of up to eight two-level systems interacting strongly with a microwave cavity. Following calibration, the frequency of each individual two-level system (qubit) is tunable without influencing the others. Bringing the qubits one by one on resonance with the cavity, we observe the collective coupling strength of the qubit ensemble. The splitting scales up with the square root of the number of the qubits, which is the hallmark of the Tavis-Cummings model. The local control circuitry causes a bypass shunting the resonator, and a Fano interference in the microwave readout, whose contribution can be calibrated away to recover the pure cavity spectrum. The simulator's attainable size of dressed states with up to five qubits is limited by reduced signal visibility, and -- if uncalibrated -- by off-resonance shifts of sub-components. Our work demonstrates control and readout of quantum coherent mesoscopic multi-qubit system of intermediate scale under conditions of noise.

preprint2020arXiv

Quantum Sensors for Microscopic Tunneling Systems

The anomalous low-temperature properties of glasses arise from intrinsic excitable entities, so-called tunneling Two-Level-Systems (TLS), whose microscopic nature has been baffling solid-state physicists for decades. TLS have become particularly important for micro-fabricated quantum devices such as superconducting qubits, where they are a major source of decoherence. Here, we present a method to characterize individual TLS in virtually arbitrary materials deposited as thin-films. The material is used as the dielectric in a capacitor that shunts the Josephson junction of a superconducting qubit. In such a hybrid quantum system the qubit serves as an interface to detect and control individual TLS. We demonstrate spectroscopic measurements of TLS resonances, evaluate their coupling to applied strain and DC-electric fields, and find evidence of strong interaction between coherent TLS in the sample material. Our approach opens avenues for quantum material spectroscopy to investigate the structure of tunneling defects and to develop low-loss dielectrics that are urgently required for the advancement of superconducting quantum computers.

preprint2020arXiv

Rabi oscillations in a superconducting nanowire circuit

We investigate the circuit quantum electrodynamics of anharmonic superconducting nanowire oscillators. The sample circuit consists of a capacitively shunted nanowire with a width of about 20 nm and a varying length up to 350 nm, capacitively coupled to an on-chip resonator. By applying microwave pulses we observe Rabi oscillations, measure coherence times and the anharmonicity of the circuit. Despite the very compact design, simple top-down fabrication and high degree of disorder in the oxidized (granular) aluminum material used, we observe lifetimes in the microsecond range.

preprint2020arXiv

Resolving the positions of defects in superconducting quantum bits

Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.

preprint2019arXiv

Introducing coherent time control to cavity-magnon-polariton modes

By connecting light to magnetism, cavity-magnon-polaritons (CMPs) can build links from quantum computation to spintronics. As a consequence, CMP-based information processing devices have thrived over the last five years, but almost exclusively been investigated with single-tone spectroscopy. However, universal computing applications will require a dynamic control of the CMP on demand and within nanoseconds. In this work, we perform fast manipulations of the different CMP modes with independent but coherent pulses to the cavity and magnon system. We change the state of the CMP from the energy exchanging beat mode to its normal modes and further demonstrate two fundamental examples of coherent manipulation: First, a dynamic control over the appearance of magnon-Rabi oscillations, i.e., energy exchange, and second, a complete energy extraction by applying an anti-phase drive to the magnon. Our results show a promising approach to control different building blocks for a quantum internet and pave the way for further magnon-based quantum computing research.

preprint2019arXiv

State preparation of a fluxonium qubit with feedback from a custom FPGA-based platform

We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the qubit into the ground state in a time much shorter than its energy relaxation time $T_1$. We show experimental results demonstrating reset of a fluxonium qubit with $99.4\,\%$ fidelity, using a readout-and-drive pulse sequence approximately $1.5 \, \mathrm{μs}$ long. Compared to passive ground state initialization through thermalization, with the time constant given by $T_1 = ~ 80 \, \mathrm{μs}$, the use of the FPGA-based platform allows us to improve both the fidelity and the time of the qubit initialization by an order of magnitude.

preprint2016arXiv

Decoherence spectroscopy with individual two-level tunneling defects

Recent progress with microfabricated quantum devices has revealed that an ubiquitous source of noise originates in tunneling material defects that give rise to a sparse bath of parasitic two-level systems (TLSs). For superconducting qubits, TLSs residing on electrode surfaces and in tunnel junctions account for a major part of decoherence and thus pose a serious roadblock to the realization of solid-state quantum processors. Here, we utilize a superconducting qubit to explore the quantum state evolution of coherently operated TLSs in order to shed new light on their individual properties and environmental interactions. We identify a frequency-dependence of TLS energy relaxation rates that can be explained by a coupling to phononic modes rather than by anticipated mutual TLS interactions. Most investigated TLSs are found to be free of pure dephasing at their energy degeneracy points, around which their Ramsey and spin-echo dephasing rates scale linearly and quadratically with asymmetry energy, respectively. We provide an explanation based on the standard tunneling model, and identify interaction with incoherent low-frequency (thermal) TLSs as the major mechanism of the pure dephasing in coherent high-frequency TLS.

preprint2015arXiv

Dispersive Response of a Disordered Superconducting Quantum Metamaterial

We consider a disordered quantum metamaterial formed by an array of superconducting flux qubits coupled to microwave photons in a cavity. We map the system on the Tavis-Cummings model accounting for the disorder in frequencies of the qubits. The complex transmittance is calculated with the parameters taken from state-of-the-art experiments. We demonstrate that photon phase shift measurements allow to distinguish individual resonances in the metamaterial with up to 100 qubits, in spite of the decoherence spectral width being remarkably larger than the effective coupling constant. Our simulations are in agreement with the results of the recently reported experiment.

preprint2015arXiv

Multi-photon dressing of an anharmonic superconducting many-level quantum circuit

We report on the investigation of a superconducting anharmonic multi-level circuit that is coupled to a harmonic readout resonator. We observe multi-photon transitions via virtual energy levels of our system up to the fifth excited state. The back-action of these higher-order excitations on our readout device is analyzed quantitatively and demonstrated to be in accordance with theoretical expectation. By applying a strong microwave drive we achieve multi-photon dressing within our anharmonic circuit which is dynamically coupled by a weak probe tone. The emerging higher-order Rabi sidebands and associated Autler-Townes splittings involving up to five levels of the investigated anharmonic circuit are observed. Experimental results are in good agreement with master equation simulations.

preprint2015arXiv

Nanoscale nonlinear effects in Erbium-implanted Yttrium Orthosilicate

Doping of substrates at desired locations is a key technology for spin-based quantum memory devices. Focused ion beam implantation is well-suited for this task due to its high spacial resolution. In this work, we investigate ion-beam implanted erbium ensembles in Yttrium Orthosilicate crystals by means of confocal photoluminescence spectroscopy. The sample temperature and the post-implantation annealing step strongly reverberate in the properties of the implanted ions. We find that hot implantation leads to a higher activation rate of the ions. At high enough fluences, the relation between the fluence and final concentration of ions becomes non-linear. Two models are developed explaining the observed behaviour.

preprint2015arXiv

Observation of directly interacting coherent two-level systems in a solid

Parasitic two-level tunneling systems originating from structural material defects affect the functionality of various microfabricated devices by acting as a source of noise. In particular, superconducting quantum bits may be sensitive to even single defects when these reside in the tunnel barrier of the qubit's Josephson junctions, and this can be exploited to observe and manipulate the quantum states of individual tunneling systems. Here, we detect and fully characterize a system of two strongly interacting defects using a novel technique for high-resolution spectroscopy. Mutual defect coupling has been conjectured to explain various anomalies of glasses, and was recently suggested as the origin of low frequency noise in superconducting devices. Our study provides conclusive evidence of defect interactions with full access to the individual constituents, demonstrating the potential of superconducting qubits for studying material defects. All our observations are consistent with the assumption that defects are generated by atomic tunneling.

preprint2015arXiv

One-dimensional Josephson junction arrays: Lifting the Coulomb blockade by depinning

Experiments with one-dimensional arrays of Josephson junctions in the regime of dominating charging energy show that the Coulomb blockade is lifted at the threshold voltage, which is proportional to the array's length and depends strongly on the Josephson energy. We explain this behavior as de-pinning of the Cooper-pair-charge-density by the applied voltage. We assume strong charge disorder and argue that physics around the de-pinning point is governed by a disordered sine-Gordon-like model. This allows us to employ the well-known theory of charge density wave de-pinning. Our model is in good agreement with the experimental data.

preprint2014arXiv

Flux Dependent Crossover Between Quantum and Classical Behavior in a dc-SQUID

In a coupled system of one classical and one quantum mechanical degree of freedom, the quantum degree of freedom can facilitate the escape of the whole system. Such unusual escape characteristics have been theoretically predicted as "Münchhausen effect". We implement such a system by shunting one of the two junctions of a dc-SQUID with an additional capacitance. In our experiments, we detect a crossover between quantum and classical escape processes related to the direction of escape. We find that, under varying external magnetic flux, macroscopic quantum tunneling periodically alternates with thermally activated escape, a hallmark of the "Münchhausen effect".

preprint2014arXiv

Fluxon readout of a superconducting qubit

Quantum computing using superconducting circuits underwent rapid development in the last decade. This field has propelled from quantum manipulation of single two-level systems to complex designs employing multiple coupled qubits allowing one to execute simple quantum algorithms. On the way to a practical quantum computer, a need for scalable interfaces between classical circuits and the quantum counterparts has arisen. Low-temperature superconducting single-flux quantum (SFQ) logic employs magnetic fluxons in Josephson transmission lines (JTLs) as basic bits for classical computation. Here, we report on an experiment implementing a direct link between SFQ electronics and a superconducting qubit. We demonstrate a readout of the state of a flux qubit through a frequency shift of a single fluxon oscillating in a JTL. The energy spectrum of the flux qubit is measured using this technique. The demonstrated approach may open ways to future full-scale integration of solid-state quantum computers with digital SFQ electronics.

preprint2014arXiv

Progress in Superconducting Metamaterials

We review progress in the development and applications of superconducting metamaterials. The review is organized in terms of several distinct advantages and unique properties brought to the metamaterials field by superconductivity. These include the low-loss nature of the meta-atoms, their compact structure, their extraordinary degree of nonlinearity and tunability, magnetic flux quantization and the Josephson effect, quantum effects in which photons interact with quantized energy levels in the meta-atom, as well as strong diamagnetism.

preprint2013arXiv

A multi-stable switchable metamaterial

The field of metamaterial research revolves around the idea of creating artificial media that interact with light in a way unknown from naturally occurring materials. This is commonly achieved by creating sub-wavelength lattices of electronic or plasmonic structures, so-called meta-atoms, that determine the interaction between light and metamaterial. One of the ultimate goals for these tailored media is the ability to control their properties in-situ which has led to a whole new branch of tunable and switchable metamaterials. Many of the present realizations rely on introducing microelectromechanical actuators or semiconductor elements into their meta-atom structures. Here we show that superconducting quantum interference devices (SQUIDs) can be used as fast, intrinsically switchable meta-atoms. We found that their intrinsic nonlinearity leads to simultaneously stable dynamic states, each of which is associated with a different value and sign of the magnetic susceptibility in the microwave domain. Moreover, we demonstrate that it is possible to switch between these states by applying a nanosecond long pulse in addition to the microwave probe signal. Apart from potential applications such as, for example, an all-optical metamaterial switch, these results suggest that multi-stability, which is a common feature in many nonlinear systems, can be utilized to create new types of meta-atoms.

preprint2013arXiv

Dissipation mechanism above the current threshold in Josephson junction chains

We present measurements on one-dimensional Josephson junction arrays formed by a chain of SQUID loops in the regime where $E_J / E_c\simeq 1$. We observe a blockaded zero current branch for small bias voltages. Above a certain voltage $V_\mathrm{sw}$ the $I$-$V$ characteristics changes discontinuously to a dissipative branch characterized by a flux dependent conductance. Three of four samples show a pronounced hysteresis for a forward and backward voltage sweep. We observe a periodic field dependence of the conductance above $V_\mathrm{sw}$ which can be described with $P(E)$ theory for cooper-pairs and therefore gives evidence of viscous dynamics of Cooper pair transport through the array.

preprint2013arXiv

Imaging the Anisotropic Nonlinear Meissner Effect in Nodal YBa$_{2}$Cu$_{3}$O$_{7-δ}$ Thin-Film Superconductors

We have directly imaged the anisotropic nonlinear Meissner effect in an unconventional superconductor through the nonlinear electrodynamic response of both (bulk) gap nodes and (surface) Andreev bound states. A superconducting thin film is patterned into a compact self-resonant spiral structure, excited near resonance in the radio-frequency range, and scanned with a focused laser beam perturbation. At low temperatures, direction-dependent nonlinearities in the reactive and resistive properties of the resonator create photoresponse that maps out the directions of nodes, or of bound states associated with these nodes, on the Fermi surface of the superconductor. The method is demonstrated on the nodal superconductor YBa$_{2}$Cu$_{3}$O$_{7-δ}$ and the results are consistent with theoretical predictions for the bulk and surface contributions.

preprint2013arXiv

Implementation of a Quantum Metamaterial

Manipulating the propagation of electromagnetic waves through sub-wavelength sized artificial structures is the core function of metamaterials. Resonant structures, such as split ring resonators, play the role of artificial "atoms" and shape the magnetic response. Superconducting metamaterials moved into the spotlight for their very low ohmic losses and the possibility to tune their resonance frequency by exploiting the Josephson inductance. Moreover, the nonlinear nature of the Josephson inductance enables the fabrication of truly artificial atoms. Arrays of such superconducting quantum two-level systems (qubits) can be used for the implementation of a quantum metamaterial. Here, we perform an experiment in which 20 superconducting flux qubits are embedded into a single microwave resonator. The phase of the signal transmitted through the resonator reveals the collective resonant coupling of up to 8 qubits. Quantum circuits of many artificial atoms based on this proof-of-principle experiment offer a wide range of prospects, from detecting single microwave photons to phase switching, quantum birefringence and superradiant phase transitions.

preprint2013arXiv

Josephson vortex coupled to a flux qubit

Experiments towards realizing a readout of superconducting qubits by using ballistic Josephson vortices are reported. We measured the microwave radiation induced by a fluxon moving in an annular Josephson junction. By coupling a flux qubit as a current dipole to the annular junction, we detect periodic variations of the fluxon's oscillation frequency versus magnetic flux through the qubit. We found that the scattering of a fluxon on a current dipole can lead to the acceleration of a fluxon regardless of a dipole polarity. We use the perturbation theory and numerical simulations of the perturbed sine-Gordon equation to analyze our results.

preprint2013arXiv

Low-loss tunable metamaterials using superconducting circuits with Josephson junctions

We report on experiments with superconducting metamaterials containing Josephson junctions. In these structures, split-ring resonators used in conventional metamaterials are replaced by superconducting loops that are interrupted by Josephson junctions, so called rf-SQUIDs. Like the split-ring resonators, these elements can be seen as LC-resonators that couple to the magnetic field. The advantage of superconducting thin-film metamaterials is that, due to the tunable intrinsic inductance of the Josephson junction, the resonance frequency of the rf-SQUID can be changed by applying an external dc magnetic field. We present experimental results that demonstrate the tunability of the resonance frequency of these devices.

preprint2012arXiv

Frequency Division Multiplexing Readout and Simultaneous Manipulation of an Array of Flux Qubits

An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout apparatus. Parallel readout of 6 flux qubits using a frequency division multiplexing technique is demonstrated, as well as simultaneous manipulation and time resolved measurement of 3 qubits. We discuss how this technique can be scaled up to read out hundreds of qubits on a chip.

preprint2012arXiv

Switching nonlinearity in a superconductor-enhanced metamaterial

We demonstrate a nonlinear metamaterial that can be switched between low and high transmission by controlling the power level of the incident beam. The origin of this nonlinear response is the superconducting Nb thin film employed in the metamaterial structure. We show that with moderate RF power of about 22 dBm it is possible to quench the superconducting state as a result of extremely strong current densities at the corners of the metamaterial's split-ring resonators. We measure a transmission contrast of 10 dB and a change in group delay of 70 ns between the low and high power states.

preprint2012arXiv

Unconventional rf photoresponse from a superconducting spiral resonator

Superconducting thin film resonators employing strip geometries show great promise in rf/microwave applications due to their low loss and compact nature. However, their functionality is limited by nonlinear effects at elevated rf/microwave powers. Here, we show that by using a planar spiral geometry carrying parallel currents in adjacent turns, this limitation can be minimized. We investigate the rf current distributions in spiral resonators implemented with Nb thin films via laser scanning microscopy. The rf current density profile along the width of the individual turns of the resonators reveals an unconventional trend: maximum current in the middle of the structure and decaying toward its edges. This unusual behavior is associated with the circular nature of the geometry and the cancellation of magnetic field between the turns, which is favorable for handling high powers since it allows the linear characteristics to persist at high rf current densities.

preprint2011arXiv

Classical Analogue of Electromagnetically Induced Transparency with a Metal-Superconductor Hybrid Metamaterial

Metamaterials are engineered materials composed of small electrical circuits producing novel interactions with electromagnetic waves. Recently, a new class of metamaterials has been created to mimic the behavior of media displaying electromagnetically induced transparency (EIT). Here we introduce a planar EIT metamaterial that creates a very large loss contrast between the dark and radiative resonators by employing a superconducting Nb film in the dark element and a normal-metal Au film in the radiative element. Below the critical temperature of Nb, the resistance contrast opens up a transparency window along with a large enhancement in group delay, enabling a significant slowdown of waves. We further demonstrate precise control of the EIT response through changes in the superfluid density. Such tunable metamaterials may be useful for telecommunication because of their large delay-bandwidth products.

preprint2011arXiv

Microscopic examination of hot spots giving rise to nonlinearity in superconducting resonators

We investigate the microscopic origins of nonlinear rf response in superconducting electromagnetic resonators. Strong nonlinearity appearing in the transmission spectra at high input powers manifests itself through the emergence of jumplike features near the resonant frequency that evolve toward lower quality factor with higher insertion loss as the rf input power is increased. We directly relate these characteristics to the dynamics of localized normal regions (hot spots) caused by microscopic features in the superconducting material making up the resonator. A clear observation of hot-spot formation inside a Nb thin film self-resonant structure is presented by employing the microwave laser scanning microscope, and a direct link between microscopic and macroscopic manifestations of nonlinearity is established.

preprint2010arXiv

Multi-photon spectroscopy of a hybrid quantum system

We report on experimental multi-photon spectroscopy of a hybrid quantum system consisting of a superconducting phase qubit coherently coupled to an intrinsic two-level defect. We directly probe hybridized states of the combined qubit-defect system in the strongly interacting regime, where both the qubit-defect coupling and the driving cannot be considered as weak perturbations. This regime is described by a theoretical model which incorporates anharmonic corrections, multi-photon processes and decoherence. We present a detailed comparison between experiment and theory and find excellent agreement over a wide range of parameters.

preprint2010arXiv

Rabi spectroscopy of a strongly driven qubit-fluctuator system

Superconducting qubits often show signatures of coherent coupling to microscopic two-level fluctuators (TLFs), which manifest themselves as avoided level crossings in spectroscopic data. In this work we study a phase qubit, in which we induce Rabi oscillations by resonant microwave driving. When the qubit is tuned close to the resonance with an individual TLF and the Rabi driving is strong enough (Rabi frequency of order of the qubit-TLF coupling), interesting 4-level dynamics are observed. The experimental data shows a clear asymmetry between biasing the qubit above or below the fluctuator's level-splitting. Theoretical analysis indicates that this asymmetry is due to an effective coupling of the TLF to the external microwave field induced by the higher qubit levels.

preprint2010arXiv

Spatial and frequency dependencies of local photoresponse of HTS strip-line resonator in regime of two-tone microwave intermodulation excitation

A new phenomenological approach to spatially-resolved research of nonlinear (NL) microwave properties of operating thin-film superconducting resonators is proposed. The approach is based on frequency and spatial singularity of Laser Scanning Microscopy (LSM) images that can be extracted from a set of 2-D patterns representing x-y distribution of the LSM photoresponse, PR(x, y), at fixed third-order intermodulation (IMD) frequencies 2f1-f2 and 2f2-f1 as a result of two-tone resonator microwave excitation at equidistant frequencies f1 and f2 relative to the fundamental resonance, f0. It was shown by us earlier that the total LSM PR(x, y) originates from two independent (resistive, PRR(x, y), and inductive, PRX(x, y)) contributions which can be extracted directly from the LSM images acquired at f1 and f2 by using a method of spatially-resolved complex impedance partition [1]. Here, we show that practically the same manipulation of LSM images at 2f1-f2 and 2f2-f1 can be used to present NL components of IMD LSM PR(x, y) in terms of its independent spatial variations of (i) inductive IMD_IND(x, y) and (ii) resistive IMD_RES(x, y) contributions reflecting the origin of the local sources of microwave NL. [1] A.P. Zhuravel, S.M. Anlage, and A.V. Ustinov, Appl. Phys. Lett., vol. 88, p. 212503, 2006.