Source author record

Ya Cheng

Ya Cheng appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

60works
8topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

60 published item(s)

preprint2022arXiv

3D large-scale fused silica microfluidic chips enabled by hybrid laser microfabrication for continuous-flow UV photochemical synthesis

We demonstrate a hybrid laser microfabrication approach, which combines the technical merits of ultrafast laser-assisted chemical etching and carbon dioxide laser-induced in-situ melting, for centimeter-scale and bonding-free fabrication of 3D complex hollow microstructures in fused silica glass. With the developed approach, large-scale fused silica microfluidic chips with integrated 3D cascaded micromixing units can be reliably manufactured. High-performance on-chip mixing and continuous-flow photochemical synthesis under UV LEDs irradiation at ~280 nm were demonstrated using the manufactured chip, indicating a powerful capability for versatile fabrication of highly transparent all-glass microfluidic reactors for on-chip photochemical synthesis.

preprint2022arXiv

High-production-rate fabrication of low-loss lithium niobate electro-optic modulators using photolithography assisted chemo-mechanical etching (PLACE)

Integrated thin-film lithium niobate (LN) electro-optic (EO) modulators of broad bandwidth, low insertion loss, low cost and high production rate are essential elements in contemporary inter-connection industries and disruptive applications. Here, we demonstrated the design and fabri-cation of a high performance thin-film LN EO modulator using photolithography assisted chemo-mechanical etching (PLACE) technology. Our device shows a 3-dB bandwidth over 50 GHz, along with a comparable low half wave voltage-length product of 2.16 Vcm. We obtain a fiber-to-fiber insertion loss of 2.6 dB.

preprint2022arXiv

Monolithically integrated active passive waveguide array fabricated on thin film lithium niobate using a single continuous photolithography process

We demonstrate a robust low-loss optical interface by tiling passive (i.e., without doping of active ions) thin film lithium niobate (TFLN) and active (i.e., doped with rare earth ions) TFLN substrates for monolithic integration of passive/active lithium niobate photonics. The tiled substrates composed of both active and passive areas allow to pattern the mask of the integrated active passive photonic device at once using a single continuous photolithography process. The interface loss of tiled substrate is measured as low as 0.26 dB. Thanks to the stability provided by this approach, a four-channel waveguide amplifier is realized in a straightforward manner, which shows a net gain of ~5 dB at 1550-nm wavelength and that of ~8 dB at 1530-nm wavelength for each channel. The robust low-loss optical interface for passive/active photonic integration will facilitate large-scale high performance photonic devices which require on-chip light sources and amplifiers.

preprint2022arXiv

Monolithically integrated waveguide-coupled single-frequency microlaser on erbium-doped thin film lithium niobate

We overcome the difficulty in realizing a monolithic waveguide-coupled microring laser integrated on erbium-doped thin film lithium niobate (Er: TFLN) using photolithography assisted chemo-mechanical etching (PLACE) technique. We demonstrate an integrated single-frequency microring laser operating around 1531 nm wavelength. The PLACE technique, enabling integrated Er: TFLN photonics with low propagation loss, can thus be used to realize low cost mass production of monolithic on-chip microlasers with applications ranging from optical communication and photonic integrated circuit (PIC) to precision metrology and large-scale sensing.

preprint2022arXiv

On-chip integrated Yb3+-doped waveguide amplifiers on thin film lithium niobate

We report the fabrication and optical characterization of Yb3+-doped waveguide amplifiers (YDWA) on the thin film lithium niobate fabricated by photolithography assisted chemo-mechanical etching. The fabricated Yb3+-doped lithium niobate waveguides demonstrates low propagation loss of 0.13 dB/cm at 1030 nm and 0.1 dB/cm at 1060 nm. The internal net gain of 5 dB at 1030 nm and 8 dB at 1060 nm are measured on a 4.0 cm long waveguide pumped by 976nm laser diodes, indicating the gain per unit length of 1.25 dB/cm at 1030 nm and 2 dB/cm at 1060 nm, respectively. The integrated Yb3+-doped lithium niobate waveguide amplifiers will benefit the development of a powerful gain platform and are expected to contribute to the high-density integration of thin film lithium niobate based photonic chip.

preprint2022arXiv

Ultrafast modulation of the molten metal surface tension under femtosecond laser irradiation

We predict ultrafast modulation of the pure molten metal surface stress fields under the irradiation of the single femtosecond laser pulse through the two-temperature model molecular-dynamics simulations. High-resolution and precision calculations are used to resolve the ultrafast laser-induced anisotropic relaxations of the pressure components on the time-scale comparable to the intrinsic liquid density relaxation time. The magnitudes of the dynamic surface tensions are found being modulated sharply within picoseconds after the irradiation, due to the development of the nanometer scale non-hydrostatic regime behind the exterior atomic layer of the liquid surfaces. The reported novel regulation mechanism of the liquid surface stress field and the dynamic surface tension hints at levitating the manipulation of liquid surfaces, such as ultrafast steering the surface directional transport and patterning.

preprint2021arXiv

Broadband highly efficient nonlinear optical processes in on-chip integrated lithium niobate microdisk resonators of Q-factor above 10^8

We demonstrated broadband highly efficient optical nonlinear processes in on-chip integrated lithium niobate (LN) microdisk resonators. The Q factors of the micro-resonators fabricated by femtosecond laser writing and chemo-mechanical polishing are reliably above 10^8, approaching the intrinsic material absorption limit of LN. Broadband nonlinear processes, including optical parametric oscillation (OPO), second harmonic generation (SHG), third harmonic generation, and fourth harmonic generation, were observed with ultrahigh efficiencies in the same LN microdisk without introducing domain inversion, thanks to the natural quasi phase-matching and the dense spectral modes of the X-cut LN microdisk with millimeter diameter. The threshold of OPO and the absolute conversion efficiency of SHG are 19.6 microwatt and 66%, both surpass the state-of-the-art values among on-chip LN micro-resonators demonstrated so far. The broadband and highly efficient nonlinear frequency conversions achieved with the ultrahigh-Q LN microdisk resonators promise high-density integration of nonlinear photonic devices such as frequency convertors and entangled photon sources.

preprint2021arXiv

On-chip integrated waveguide amplifiers on Erbium-doped thin film lithium niobate on insulator

We demonstrate on-chip light amplification with integrated optical waveguide fabricated on erbium-doped thin film lithium niobate on insulator (TFLNOI) using the photolithography assisted chemo-mechanical etching (PLACE) technique. A maximum internal net gain of 18 dB in the small-signal-gain regime is measured at the peak emission wavelength of 1530 nm for a waveguide length of 3.6 cm, indicating a differential gain per unit length of 5 dB/cm. This work paves the way to the monolithic integration of diverse active and passive photonic components on the TFLNOI platform.

preprint2020arXiv

A spectrally bright wavelength-switchable vacuum ultraviolet source driven by quantum coherence in strong-field-ionized molecules

We report generation of spectrally bright vacuum ultraviolet (VUV) and deep UV (DUV) coherent radiations driven by quantum coherence in tunnel-ionized carbon monoxide (CO) molecules. Our technique allows us to switch between multiple wavelengths provided by the abundant energy levels of molecular ions. The DUV/VUV sources can have arbitrary polarization states by manipulating the pump laser polarization. The superior temporal and spectral properties of the developed source give rise to a broadband Raman comb in the DUV/VUV region.

preprint2020arXiv

Efficient light coupling between an ultra-low loss lithium niobate waveguide and an adiabatically tapered single mode optical fiber

A lithium niobate on insulator ridge waveguide allows constructing high-density photonic integrated circuits thanks to its small bending radius offered by the high index contrast. Meanwhile, the significant mode-field mismatch between an optical fiber and the single-mode lithium niobate waveguide leads to low coupling efficiencies. Here, we demonstrate, both numerically and experimentally, that the problem can be solved with a tapered single mode fiber of an optimized mode field profile. Numerical simulation shows that the minimum coupling losses for the TE and TM mode are 0.32 dB and 0.86 dB, respectively. Experimentally, though without anti-reflection coating, the measured coupling losses for TE and TM mode are 1.32 dB and 1.88 dB, respectively. Our technique paves a way for a broad range of on-chip lithium niobate applications.

preprint2020arXiv

High-index-contrast single-mode optical waveguides fabricated on lithium niobate by photolithography assisted chemo-mechanical etching (PLACE)

We report fabrication of low loss single mode waveguides on lithium niobate on insulator (LNOI) cladded by a layer of SiO2. Our technique, termed photolithography assisted chemo-mechanical etching (PLACE), relies on patterning of a chromium film into the mask shape by femtosecond laser micromachining and subsequent chemo-mechanical etching of the lithium niobate thin film. The high-index-contrast single mode waveguide is measured to have a propagation loss of 0.13 dB/cm. Furthermore, waveguide tapers are fabricated for boosting the coupling efficiency.

preprint2020arXiv

Incubation Induced Light Concentration Beyond the Diffraction Limit for High-Resolution Glass Printing

In the past two decades, tremendous efforts have been exerted to understand and control the delivery of ultrashort laser pulses into various types of transparent materials ranging from glass and crystal to polymer and even bio-materials. This approach opens up the route toward determinative and highly localized modification within the transparent materials, enabling three-dimensional (3D) micromachining of the materials into sophisticated structures and devices with the extreme geometrical flexibility. Owing to the linear diffraction and nonlinear self-focusing effects, the focal volume typically exhibits an asymmetric profile stretching along the longitudinal direction. This effect becomes more severe when focusing deeply into the transparent substrates for printing objects of large heights. In this work a new laser-material interaction regime is identified with the exceptional incubation effect originating from self-regulated multiple-pulse interactions with accumulated material changes. Our finding reveals a focal-volume-invariant modification deeply inside the fused silica glass, in striking contrary to the traditional believes that the geometrical shape of the laser induced modification follows the intensity distribution of the inscription laser. A macro-scale geometrically complex glass sculpture is successfully manufactured with the incubation assisted ultrashort laser inscription at uniform micrometer resolutions in all three dimensions.

preprint2020arXiv

Role of rotational coherence in femtosecond-pulse-driven nitrogen ion lasing

We experimentally investigated the rotationally resolved polarization characteristics of N$_2^+$ lasing at 391 and 428 nm using a pump-seed scheme. By varying the relative angle between the linear polarizations of the pump and seed, it is found that the polarizations of the P and R branches of 391-nm lasing are counter-rotated. By contrast, both branches of 428-nm lasing remain polarized along the pump. The origin of the puzzled abnormal polarization characteristics is found based on a complete physical model that simultaneously includes the transient photoionization and the subsequent coupling among the electronic, vibrational and rotational quantum states of ions.It suggests that the cascaded resonant Raman processes following ionization create negative coherence between the rotational states of $J$ and $J$+2 in the ionic ground state X$^2Σ_g^+(ν=0)$, which leads to mirror-symmetrical polarization for the P and R branches of 391-nm lasing. Both the experiment and theory indicate that the demonstrated rotational coherence plays an extremely pivotal role in clarifying the gain mechanism of N$_2^+$ lasing and opens up the route toward quantum optics under ultrafast strong fields.

preprint2019arXiv

A compact and efficient three-dimensional microfluidic mixer

Microfluidic mixing is a fundamental functionality in most lab on a chip (LOC) systems,whereas realization of efficient mixing is challenging in microfluidic channels due to the small Reynolds numbers. Here, we design and fabricate a compact three-dimensional (3D) micromixer to enable efficient mixing at various flow rates. The performance of the fabricated micromixer was examined using blue and red inks. The extreme flexibility in fabricating microfluidic structures of arbitrary 3D geometries using femtosecond laser micromachining allows us to tackle the major disadvantageous effects for optimizing the mixing efficiency.

preprint2019arXiv

Efficient Electro-optical Tuning of Optical Frequency Microcomb on a Monolithically Integrated High-Q Lithium Niobate Microdisk

We demonstrate efficient tuning of a monolithically integrated lithium niobate microdisk (LN) optical frequency microcomb. Utilizing the high optical quality (Q) factor (i.e., Q~7.1*10^6) of the microdisk, the microcomb spans over a spectral bandwidth of ~200 nm at a pump power as low as 20.4 mW. Combining the large eletro-optic coefficient of LN and optimum design of the geometry of microelectrodes, we demonstrate electro-optical tuning of the comb with a spectral range of 400 pm and a tuning efficiency of ~38 pm/100V.

preprint2019arXiv

Extreme nonlinear Raman interaction of an ultrashort nitrogen ion laser with an impulsively excited molecular wavepacket

We report generation of cascaded rotational Raman scattering up to 58th orders in coherently excited CO_2 molecules. The high-order Raman scattering, which produces a quasiperiodic frequency comb with more than 600 sidebands, is obtained using an intense femtosecond laser to impulsively excite rotational coherence and the femtosecond-laser-induced N_2^+ lasing to generate cascaded Raman signals. The novel configuration allows this experiment to be performed with a single femtosecond laser beam at free-space standoff locations. It is revealed that the efficient spectral extension of Raman signals is attributed to the specific spectra-temporal structures of N_2^+ lasing, the ideal spatial overlap of femtosecond laser and N2+ lasing, and the guiding effect of molecular alignment. The Raman spectrum extending above 2000 cm^-1 naturally corresponds to a femtosecond pulse train due to the periodic revivals of molecular rotational wavepackets.

preprint2019arXiv

Freeform microfluidic networks encapsulated in laser printed three-dimensional macro-scale glass objects

Large-scale microfluidic microsystems with complex three-dimensional (3D) configurations are highly in demand by both fundamental research and industrial application, holding the potentials for fostering a wide range of innovative applications such as lab-on-a-chip and organ-on-a-chip as well as continuous-flow manufacturing of fine chemicals. However, freeform fabrication of such systems remains challenging for most of the current fabrication techniques in terms of fabrication resolution, flexibility, and achievable footprint size. Here, we report ultrashort pulse laser microfabrication of freeform microfluidic circuits with high aspect ratios and tunable diameters embedded in 3D printed glass objects. We achieve uniform microfluidic channel diameter by carefully distributing a string of extra access ports along the microfluidic channels for avoiding the over-etching in the thin microfluidic channels. After the chemical etching is completed, the extra access ports are sealed using carbon dioxide laser induced localized glass melting. We demonstrate a model hand of fused silica with a size of ~3 cm * 2.7 cm * 1.1 cm in which the whole blood vessel system is encapsulated.

preprint2018arXiv

Polarization-insensitive space-selective etching in fused silica induced by picosecond laser irradiation

It is well known that when the fused silica is irradiated with focused femtosecond laser beams, space selective chemical etching can be achieved. The etching rate depends sensitively on the polarization of the laser. Surprisingly, we observe that by chirping the Fourier-transform-limited femtosecond laser pulses to picosecond pulses, the polarization dependence of the etching rate disappears, whereas an efficient etching rate can still be maintained. Observation with a scanning electron microscope reveals that the chirped pulses can induce interconnected nanocracks in the irradiated areas which facilitates efficient introduction of the etchant into the microchannel. The reported technology is of great use for fabrication of three-dimensional (3D) microfluidic systems and glass-based 3D printing.

preprint2016arXiv

Fabrication of polarization-independent single-mode waveguides in lithium niobate crystal with femtosecond laser pulses

We report on fabrication of depressed cladding optical waveguides buried in lithium niobate crystal with shaped femtosecond laser pulses. Depressed cladding waveguides of variable mode-field sizes are fabricated by forming the four sides of the cladding using a slit-beam shaping technique. We show that the waveguides fabricated by our technique allows single-mode propagation of the light polarized in both vertical and horizontal directions.

preprint2016arXiv

Fabrication of polarization-independent waveguides deeply buried in crystal using aberration-corrected femtosecond laser direct writing

Writing optical waveguides with femtosecond laser pulses provides the capability of forming three-dimensional photonic circuits for manipulating light fields in both linear and nonlinear manners. To fully explore this potential, large depths of the buried waveguides in transparent substrates are often desirable to facilitate achieving vertical integration of waveguides in a multi-layer configuration, which, however, is hampered by rapidly degraded axial resolution caused by optical aberration. Here, we show that with the correction of the spherical aberration, polarization-independent waveguides can be inscribed in a nonlinear optical crystal lithium niobate (LN) at depths up to 1.4 mm, which is more than one order of magnitude deeper than the waveguides written with aberration uncorrected femtosecond laser pulses. Our technique is beneficial for applications ranging from miniaturized nonlinear light sources to quantum information processing.

preprint2016arXiv

Harmonic-seeded resonant Raman amplification in strong-field ionized nitrogen molecules

Generation of free-space laser-like emissions of high spatiotemporal coherence and narrow bandwidth in atmosphere opens promising opportunities for remote spectroscopic sensing. Here, we report on generation of such laser-like emissions, which results from the combined contributions of perturbative and non-perturbative nonlinear optical effects in nitrogen molecules exposed to intense mid-infrared laser fields. We systematically investigate the dependence of the generated free-space laser spectrum on wavelength and power of the driver laser. It is revealed that the free-space laser is produced by resonant Raman amplification of the fifth harmonic of the driver pulses in rotational wavepacket of the molecular nitrogen ions.

preprint2016arXiv

High-throughput in-volume processing in glass with isotropic spatial resolutions in three dimensions

We report on fabrication of three dimensional (3D) microstructures in glass with isotropic spatial resolutions. To achieve high throughput fabrication, we expand the focal spot size with a low-numerical-aperture lens, which naturally results in a degraded axial resolution. We solve the problem with simultaneous spatial temporal focusing which leads to an isotropic laser-affected volume with a spatial resolution of ~100 micron.

preprint2016arXiv

Transverse writing of three-dimensional tubular optical waveguides in glass with slit-shaped femtosecond laser beams

We report on fabrication of tubular optical waveguides buried in ZBLAN glass based on transverse femtosecond laser direct writing. Irradiation in ZBLAN with focused femtosecond laser pulses leads to decrease of refractive index in the modified region. Tubular optical waveguides of variable mode areas are fabricated by forming the four sides of the cladding with slit-shaped femtosecond laser pulses, ensuring single mode waveguiding with a mode field dimension as small as ~ 4 μm.

preprint2015arXiv

Backward air lasing actions induced by femtosecond laser filamentation: influence of population inversion lifetime

We experimentally investigate generation of backward 357 nm N2 laser in a gas mixture of N2/Ar using 800-nm femtosecond laser pulses, and examine the involved gain dynamics based on pump-probe measurements. Our findings show that a minimum lifetime of population inversion in the excited N2 molecules is required for generating intense backward nitrogen lasers, which is ~0.8 ns under our experimental conditions. The results shed new light on the mechanism for generating intense backward lasers from ambient air, which are highly in demand for high sensitivity remote atmospheric sensing application.

preprint2015arXiv

Generation of elliptically polarized nitrogen-ion laser fields using two-color femtosecond laser pulses

We experimentally investigate generation of molecular nitrogen-ion lasers with two femtosecond laser pulses at different wavelengths. The first pulse serves as the pump which ionizes the nitrogen molecules and excites the molecular ions to excited electronic states. The second pulse serves as the probe which leads to stimulated emission from the excited molecular ions. We observe that changing the angle between the polarization directions of the two pulses gives rise to elliptically polarized molecular nitrogen-ion laser fields, which is interpreted as a result of strong birefringence of the gain medium near the wavelengths of the molecular nitrogen-ion laser.

preprint2015arXiv

Non-perturbative generation of above-threshold harmonics from pre-excited argon atoms in intense mid-infrared laser fields

We experimentally investigate the generation of above-threshold harmonics completely from argon atoms on an excited state using mid-infrared femtosecond laser pulses. The highly nonlinear dependences of the observed signal on the pulse energy and polarization of the driver laser pulses indicate its non-perturbative characteristic.

preprint2015arXiv

Phase matched second harmonic generation in an on-chip lithium niobate microresonator fabricated by femtosecond laser

Nonlinear optical processes in whispering gallery mode (WGM) microresonators have attracted much attention. Owing to the strong confinement of light in a small volume, a WGM microresonator can dramatically boost the strength of light field, thereby promoting the nonlinear interaction between the light and the resonator material. However, realization of efficient nonlinear parametric process in microresonators is a challenging issue. The major difficulty is to simultaneously ensure the phase matching condition and a coherent multiple resonance condition for all the waves participating in the nonlinear conversion process. Here, we demonstrate highly efficient second harmonic generation (SHG) in an on-chip lithium niobate microresonator fabricated by femtosecond laser direct writing. We overcome the difficulty of double resonance for the phase matched pump and second harmonic waves by selectively exciting high order modes in the fabricated thin-disk microresonator. Our technique opens opportunities for integrated classical and quantum photonic applications.

preprint2015arXiv

Population Redistribution among Multiple Electronic States of Molecular Nitrogen Ions in Strong Laser Fields

We carry out a combined theoretical and experimental investigation on the population distributions in the ground and excited states of tunnel ionized N2 molecules at various driver wavelengths in the near- and mid-infrared range. Our results reveal that efficient couplings (i.e., population exchanges) between the ground state and the excited states occur in strong laser fields. The couplings result in the population inversion between the ground and the excited states at the wavelengths near 800 nm, which is verified by our experiment by observing the amplification of a seed at ~391 nm. The result provides insight into the mechanism of free-space nitrogen ion lasers generated in remote air with strong femtosecond laser pulses.

preprint2015arXiv

Spatiotemporal focusing does not always improve axial intensity localization

We report on an experimental comparison on critical intensities of nonlinear self-focusing in air with conventional focusing and spatiotemporal focusing schemes. Our results show that the conventional focusing with the focal lens completely filled with the incident beam allows for the strongest axial intensity confinement against the self-focusing effect. This is because that in the high-numerical-aperture condition, the focal spot will have a compact size which results in a high focal intensity. Meanwhile, the Rayleigh length of the focused beam will be substantially shortened which efficiently postpones the onset of self-focusing.

preprint2015arXiv

Time-resolved shadowgraphs of transient plasma induced by spatiotemporally focused femtosecond laser pulses in fused silica glass

We report on experimental observations of formation and evolution of transient plasma produced in fused silica glass with spatiotemporally focused (STF) femtosecond laser pulses using a pump-probe shadow imaging technique. Surprisingly, the observation shows that the track of the plasma is significantly curved, which is attributed to an asymmetric density distribution of the transient plasma produced in the focal volume caused by the pulse front tilt of the STF laser field.

preprint2014arXiv

Enhanced electron yield from a laser-plasma accelerator using high-Z gas jet targets

An investigation of the multi-hundred MeV electron beam yield (charge) form helium, nitrogen, neon and argon gas jet plasmas in a laser-plasma wakefield acceleration experiment was carried out. The charge measurement has been made via imaging the electron beam intensity profile on a fluorescent screen into a 14-bit charge coupled device (CCD) which was cross-calibrated with nondestructive electronics-based method. Within given laser and plasma parameters, we found that laser-driven low Z- gas jet targets generate high-quality and well-collimated electron beams with reasonable yields at the level of 10-100 pC. On the other hand, filamentary electron beams which were observed from high-Z gas jets at higher densities reached much higher yield. Evidences for cluster formation were clearly observed in high-Z gases, especially in the argon gas jet target where we received the highest yield of ~ 3 nC

preprint2014arXiv

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining

We report on fabrication of a microtoroid resonator of a high-quality factor (i. e., Q-factor of ~3.24x10^6 measured under the critical coupling condition) integrated in a microfluidic channel using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO_2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21x10^5 as measured in air, which should still be sufficient for many sensing applications. We test the functionality of the integrated optofluidic sensor by performing bulk refractive index sensing of purified water doped with tiny amount of salt. It is shown that a detection limit of ~1.2x10^-4 refractive index unit can be achieved. Our result showcases the capability of integration of high-Q microresonators with complex microfluidic systems using femtosecond laser 3D micromachining.

preprint2014arXiv

Fabrication of three-dimensional microdisk resonators in calcium fluoride by femtosecond laser micromachining

We report on fabrication of on-chip calcium fluoride (CaF2) microdisk resonators using water-assisted femtosecond laser micromachining. Focused ion beam (FIB) milling is used to create ultra-smooth sidewalls. The quality (Q)-factors of the fabricated microresonators are measured to be 4.2x10^4 at wavelengths near 1550 nm. The Q factor is mainly limited by the scattering from the bottom surface of the disk whose roughness remains high due to the femtosecond laser micromachining process. This technique facilitates formation of on-chip microresonators on various kinds of bulk crystalline materials, which can benefit a wide range of applications such as nonlinear optics, quantum optics, and chip-level integration of photonic devices.

preprint2014arXiv

Gain dynamics of a free-space nitrogen laser pumped by circularly polarized femtosecond laser pulses

We experimentally demonstrate ultrafast dynamic of generation of a strong 337-nm nitrogen laser by injecting an external seed pulse into a femtosecond laser filament pumped by a circularly polarized laser pulse. In the pump-probe scheme, it is revealed that the population inversion between the excited and ground states of N2 for the free-space 337-nm laser is firstly built up on the timescale of several picoseconds, followed by a relatively slow decay on the timescale of tens of picoseconds, depending on the nitrogen gas pressure. By measuring the intensities of 337-nm signal from nitrogen gas mixed with different concentrations of oxygen gas, it is also found that oxygen molecules have a significant quenching effect on the nitrogen laser signal. Our experimental observations agree with the picture of electron-impact excitation.

preprint2014arXiv

Impulsive rotational Raman scattering of N2 by a remote "air laser" in femtosecond laser filament

We report on experimental realization of impulsive rotational Raman scattering from neutral nitrogen molecules in a femtosecond laser filament using an intense self-induced white-light seeding "air laser" generated during the filamentation of an 800 nm Ti: Sapphire laser in nitrogen gas. The impulsive rotational Raman fingerprint signals are observed with a maximum conversion efficiency of ~0.8%. Our observation provides a promising way of remote identification and location of chemical species in atmosphere by rotational Raman scattering of molecules.

preprint2014arXiv

Integration of an optical fiber taper with an optical microresonator fabricated in glass by femtosecond laser 3D micromachining

We report on fabrication of a microtoroid resonator of a high-quality factor (i. e., Q-factor of ~3.24x10^6 measured under the critical coupling condition) using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber taper to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21x10^5 as measured in air.

preprint2014arXiv

Interferometric characterization of pulse front tilt of spatiotemporally focused femtosecond laser pulses for three-dimensional micromachining application

We report on an experimental measurement of the pulse front tilt (PFT) of spatiotemporally focused femtosecond laser pulses in the focal plane in both air and bulk transparent materials, which is achieved by examination of the interference pattern between the spatiotemporally focused pulse and a conventional focused reference pulse as a function of time delay between the two pulses. Our simulation results agree well with the experimental observations.

preprint2014arXiv

On-chip tuning of the resonant wavelength in a high-Q microresonator integrated with a microheater

We report on fabrication of a microtoroid resonator of high-quality (high-Q) factor integrated with an on-chip microheater. Both the microresonator and microheater are fabricated using femtosecond laser three-dimensional (3D) micromachining. The microheater, which is located about 200 micron away from the microresonator, has a footprint size of 200 micron by 400 micron. Tuning of the resonant wavelength in the microresonator has been achieved by varying the voltage applied on the microheater. The drifting of the resonant wavelength shows a linear dependence on the square of the voltage applied on the microheater. We found that the response time of the microresonator is less than 10 secs which is significantly shorter than the time required for reaching a thermal equilibrium on conventional heating instruments such as an external electric heater.

preprint2014arXiv

Plasma waves excited at interface by femtosecond laser irradiation enabling formation of volume nanograting in glass

Irradiation of intense ultrafast laser pulses in glasses can lead to formation of nanogratings whose periods are significantly smaller than the incident irradiation wavelength. The mechanism of the exotic phenomenon is still under debate. Here, we access the snapshots of morphologies in the laser affected regions in a porous glass which reveal the evolution of the formation of nanogratings with increasing number of laser pulses. Combined with further theoretical analyses, our observation provides important clues which suggest that excitation of standing plasma waves at the interfaces between areas modified and unmodified by the femtosecond laser irradiation plays a crucial role for promoting the growth of periodic nanogratings. The finding indicates that the formation of volume nanogratings induced by irradiation of femtosecond laser pulses is initiated with a mechanism similar to the formation of surface nanoripples.

preprint2014arXiv

Quasi-monoenergetic Electron Beams from Laser-plasma Acceleration by Ionization-induced Injection in Low- density Pure Nitrogen

We report a laser wakefield acceleration of electron beams up to 130 MeV from laser-driven 4-mm long nitrogen gas jet. By using a moderate laser intensity (3.5*10^18 W.cm^(-2)) and relatively low plasma densities (0.8*10^18 cm^(-3) to 2.7*10^18 cm^(-3)) we have achieved a stable regime for laser propagation and consequently a stable generation of electron beams. We experimentally studied the dependence of the drive laser energy on the laser-plasma channel and electron beam parameters. The quality of the generated electron beams is discussed within the framework of the ionization-induced injection mechanism.

preprint2014arXiv

Real-time observation of dynamics in rotational molecular wave packets by use of "air laser" spectroscopy

Molecular rotational spectroscopy based on strong-field-ionization-induced nitrogen laser is employed to investigate the time evolution of the rotational wave packet composed by a coherent superposition of quantum rotational states created in a field-free molecular alignment. We show that this technique uniquely allows real-time observation of the ultrafast dynamics of the individual rotational states in the rotational wavepacket. Our analysis also shows that there exist two channels of generation of the nitrogen laser, shedding new light on the population inversion mechanism behind the air laser generated by intense femtosecond laser pulses.

preprint2014arXiv

Second harmonic generation in a high-Q lithium niobate microresonator fabricated by femtosecond laser micromachining

We report on fabrication of high Q lithium niobate (LN) whispering-gallery-mode (WGM) microresonators suspended on silica pedestals by femtosecond laser microfabrication. The micrometer-scale (diameter ~82 μm) LN resonator possesses a Q factor of 2.5x10^5 around 1550 nm wavelength range. Moreover, second harmonic generation with a continuous-wave tunable single-longitudinal-mode pump laser in the on-chip LN microresonator is demonstrated in the on-chip LN microresonator. A fiber taper is employed to couple the pump laser into the microresonator, showing a normalized conversion efficiency of 1.35x10^-5/mW.

preprint2013arXiv

Alignment-dependent fluorescence emission induced by tunnel ionization of carbon dioxide from lower-lying orbitals

Study on ionization process of molecules in an intense infrared laser field is of paramount interest in strong-field physics and constitutes the foundation of imaging of molecular valence orbitals and attosecond science. We show measurement of alignment-dependent ionization probabilities of the lower-lying orbitals of the molecules by experimentally detecting alignment-dependence of fluorescence emission from tunnel ionized carbon dioxide molecules. The experimental measurements are compared with the theoretical calculations of strong field approximation (SFA) and molecular ADK models. Our results demonstrate the feasibility of an all-optical approach for probing the ionization dynamics of lower-lying orbitals of molecules, which is still difficult to achieve until now by other techniques. Moreover, the deviation between the experimental and theoretical results indicates the incompleteness of current theoretical models for describing strong field ionization of molecules.

preprint2013arXiv

Low-threshold whispering-gallery-mode microlasers fabricated in a Nd: glass substrate by three-dimensional femtosecond laser micromachining

We report on fabrication of whispering-gallery-mode microlasers in a Nd:glass chip by femtosecond laser three-dimensional (3D) micromachining. Main fabrication procedures include the fabrication of freestanding microdisks supported by thin pillars by femtosecond laser ablation of the glass substrate immersed in water, followed by CO2 laser annealing for surface smoothing. Lasing is observed at a pump threshold as low as ~69 μW at room temperature with a continuous-wave laser diode operating at 780nm. This technique allows for fabrication of microcavities of high quality factors in various dielectric materials such as glasses and crystals.

preprint2013arXiv

Reconstruction of a Rotational Wavepacket of Inverted Molecular Ions in an Intense Femtosecond Laser Field

We report on generation of a rotational wavepacket in the ground vibronic state (v = 0) of excited electronic B2Σu+ state of N2+ in a femtosecond laser induced plasma spark. Decoding of the rotational wavepacket is achieved with the frequency-resolved seed-amplified air laser spectrum resulting from the population inversion between the B2Σu+-X2Σg+ states of N2+ in the plasma. We also observe that the rotational wave-packet leads to modulation of the amplified seed signals in the time domain using a pump-probe scheme, which can be well reproduced by theoretical calculation. Our results demonstrate that the air laser provides an ideal probe for remote characterization of molecular rotational states distribution in a femtosecond laser induced filament.

preprint2013arXiv

Self-induced white-light seeding laser in a femtosecond laser filament

We report, for what we believe to be the first time, on the generation of remote self-seeding laser amplification by using only one 800 nm Ti:Sapphire femtosecond laser pulse. The laser pulse (~ 40 fs) is first used to generate a filament either in pure nitrogen or in ambient air in which population inversion between ground and excited states of nitrogen molecular ions is realized. Self-induced white light inside the filament is then serving as the seed to be amplified. The self-induced narrow-band laser at 428 nm has a pulse duration of ~2.6 ps with perfect linear polarization property. This finding opens new possibilities for remote detection in the atmosphere.

preprint2013arXiv

Signature of multi-channel interference in high-order harmonic generation from N2 driven by intense mid-infrared pulses

We investigate the multi-electron dynamics in high-order harmonic generation (HHG) from N2 molecules. Clear spectral minima are observed in the cutoff region at all three mid-infrared wavelengths (i.e., 1300, 1400 and 1500 nm) chosen in our experiment. It is found that the positions of the spectral minima do not depend on the alignment angles of molecules. In addition, the spectral minima shift almost linearly with the increasing laser intensity at all three wavelengths, which provides a strong evidence on the dynamic multi-channel interference origin of these minima. The advantages of observation of dynamic multi-channel interference based on HHG driven by long wavelength lasers are discussed.

preprint2013arXiv

Signature of superradiance from a nitrogen gas plasma channel produced by strong field ionization

Recently, Yao et al. demonstrated the creation of coherent emissions in nitrogen gas with two-color (800 nm + 400 nm) ultrafast laser pulses [New J. Phys. 15, 023046 (2013)]. Based on this two-color scheme, here we report on systematic investigation of temporal characteristics of the coherent emission at 391 nm by experimentally examining its evolution with the increase of the plasma channel induced by the intense 800 nm femtosecond laser pulses at a nitrogen gas pressure of ~25 mbar. We reveal unexpected temporal profiles of the coherent emissions, which show significant superradiance signatures owing to the quantum coherence via cooperation of an ensemble of excited N2+ molecules. Our findings shed more light on the mechanisms behind the laser-like emissions induced by strong-field ionization of molecules.

preprint2013arXiv

Terahertz imaging with sub-wavelength resolution by femtosecond laser filament in air

Terahertz (THz) imaging provides cutting edge technique in biology, medical sciences and non-destructive evaluation. However, due to the long wavelength of the THz wave, the obtained resolution of THz imaging is normally a few hundred microns and is much lower than that of the traditional optical imaging. We introduce a sub-wavelength resolution THz imaging technique which uses the THz radiation generated by a femtosecond laser filament in air as the probe. This method is based on the fact that the femtosecond laser filament forms a waveguide for the THz wave in air. The diameter of the THz beam, which propagates inside the filament, varies from 20 μm to 50 μm, which is significantly smaller than the wavelength of the THz wave. Using this highly spatially confined THz beam as the probe, THz imaging with resolution as high as 20 μm (~λ/38) can be realized.

preprint2013arXiv

Terahertz Wave Guiding by Femtosecond Laser Filament in Air

Femtosecond laser filament generates strong terahertz (THz) pulse in air. In this paper, THz pulse waveform generated by femtosecond laser filament has been experimentally investigated as a function of the length of the filament. Superluminal propagation of THz pulse has been uncovered, indicating that the filament creates a THz waveguide in air. Numerical simulation has confirmed that the waveguide is formed because of the radially non-uniform refractive index distribution inside the filament. The underlying physical mechanisms and the control techniques of this type THz pulse generation method might be revisited based on our findings. It might also potentially open a new approach for long-distance propagation of THz wave in air.

preprint2012arXiv

Direct generation of intense extreme ultraviolet supercontinuum with 35 fs, 11 mJ pulses from a femtosecond laser amplifier

We report on the generation of intense extreme ultraviolet (EUV) supercontinuum with photon energies spanning from 35 eV to 50 eV (i. e., supporting an isolated attosecond pulse with a duration of ~271 as) by loosely focusing 35 fs, 11 mJ pulses from a femtosecond laser amplifier into a 10-mm long gas cell filled with krypton gas. The dramatic change of spectral and temporal properties of the driver pulses after passing through the gas cell indicates that propagation effects play a significant role in promoting the generation of the EUV supercontinuum.

preprint2012arXiv

Femtosecond laser nanostructuring in glass with sub-50nm feature sizes

We report on controllable production of nanostructures embedded in a porous glass substrate by femtosecond laser direct writing. We show that a hollow nano-void with a lateral size of ~40 nm and an axial size of ~1500 nm can be achieved by manipulating the peak intensity and polarization of the writing laser beam. Our finding enables direct construction of 3D nanofluidics inside glass.

preprint2012arXiv

Harmonic-seeded remote laser emissions in N2-Ar, N2-Xe and N2-Ne mixtures: a comparative study

We report on the investigation on harmonic-seeded remote laser emissions at 391 nm wavelength from strong-field ionized nitrogen molecules in three different gas mixtures, i.e., N2-Ar, N2-Xe and N2-Ne. We observed a decrease in the remote laser intensity in the N2-Xe mixture because of the decreased clamped intensity in the filament; whereas in the N2-Ne mixture, the remote laser intensity slightly increases because of the increased clamped intensity within the filament. Remarkably, although the clamped intensity in the filament remains nearly unchanged in the N2-Ar mixture because of the similar ionization potentials of N2 and Ar, a significant enhancement of the lasing emission is realized in the N2-Ar mixture. The enhancement is attributed to the stronger third harmonic seed, and longer gain medium due to the extended filament.

preprint2012arXiv

On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing

We report on the fabrication of three-dimensional (3D) high-Q whispering gallery microcavities on a fused silica chip by femtosecond laser microfabriction, enabled by the 3D nature of femtosecond laser direct writing. The processing mainly consists of formation of freestanding microdisks by femtosecond laser direct writing and subsequent wet chemical etching. CO2 laser annealing is followed to smooth the microcavity surface. Microcavities with arbitrary tilting angle, lateral and vertical positioning are demonstrated, and the quality (Q)-factor of a typical microcavity is measured to be up to 1.07x10^6, which is currently limited by the low spatial resolution of motion stage used during the laser patterning and can be improved with motion stages of higher resolutions.

preprint2012arXiv

Remote creation of strong and coherent emissions in air with two-color ultrafast laser pulses

We experimentally demonstrate generation of strong narrow-bandwidth emissions with excellent coherent properties at ~391 nm and ~428 nm from molecular ions of nitrogen inside a femtosecond filament in air by an orthogonally polarized two-color driver field (i. e., 800 nm laser pulse and its second harmonic). The durations of the coherent emissions at 391 nm and 428 nm are measured to be ~2.4 ps and ~7.8 ps respectively, both of which are much longer than the duration of the pump and its second harmonic pulses. Furthermore, the measured temporal decay characteristics of the excited molecular systems suggest an "instantaneous" population inversion mechanism that may be achieved in molecular nitrogen ions at an ultrafast time scale comparable to the 800 nm pump pulse.

preprint2012arXiv

Ultrafast laser-induced subwavelength structures towards nanoscale: the significant role of plasmonic effects

Nowadays, via controlling surface plasmons (SPs) on elaborate man-made structures, plasmonics aiming at manipulating light beyond the diffraction limit has aroused great interest. Here, nevertheless, we demonstrate in short-pulse laser ablation ultrafast active plasmonic structures spontaneously generate in virtue of plasmonic effects rather than human ingenuity. First, the splitting of laser-induced subwavelength gratings that is experimentally evidenced on ZnO, Si, and GaAs, is confirmed to originate in the conversion of SP modes from the resonant to the nonresonant mode and further to the inphase or antiphase asymmetric mode. Further, as pulse number increases the universal scaling-down of laser-induced structures is derived from the conversion of physical regimes of plasmonic interaction from the optical to the electrostatic regime, which may arouse quasistatic SPs with interacting scales far beyond the diffraction limit and result in the ultrafast, non-thermal ablation for extraordinary electrostatic enhancement. Generally, the plasmonic mechanisms reveal the link between the deep-subwavelength space-scale and the ultra-short timescale for ultrafast laser-induced nanostructures: basically, "nanoscale" tends to eliminate electromagnetic retardation effects and bring an instant respond to the incident field, and arouse electrostatic interactions with giant local-field enhancement facilitating ultrafast ablation driven by tremendous electrostatic forces. Thus, active plasmonic structures provided with simultaneous "nanoscale" and "ultrafast" is apt to form in ultrafast ablation. In addition, the plasmonic mechanisms can act as a powerful "evolutionary force" acting in multipulse ablation and promoting the growth of resonant nanostructures-various typical plasmonic structures may be self-generated through multipulse evolution, which can be considered as a kind of natural plasmonics.

preprint2011arXiv

Comparative investigation of third and fifth harmonic generation in atomic and molecular gases driven by mid-infrared ultrafast laser pulses

We report on the comparative experimental investigation on third and fifth harmonic generation (THG and FHG) in atomic and molecular gases driven by mid-infrared ultrafast laser pulses at a wavelength of ~1500 nm. We observe that the conversion efficiencies of both the THG and FHG processes saturate at similar peak intensities close to ~1.5\times1014 W/cm2 for argon, nitrogen, and air, whose ionization potentials are close to each other. Near the saturation intensity, the ratio of yields of the FHG and THG reaches ~10-1 for all the gases. Our results show that high-order Kerr effects do exist, whereas they are insufficient to balance the Kerr self-focusing without the assistance of plasma generation.

preprint2011arXiv

High-brightness switchable multi-wavelength remote laser in air

Remote laser in air based on amplified spontaneous emission (ASE) has produced rather well-collimated coherent beams in both backward and forward propagation directions, opening up possibilities for new remote sensing approaches. The remote ASE-based lasers were shown to enable operation either at ~391 and 337 nm using molecular nitrogen or at ~845 nm using molecular oxygen as gain medium, depending on the employed pump lasers. To date, a multi-wavelength laser in air that allows for dynamically switching the operating wavelength has not yet been achieved, although this type of laser is certainly of high importance for detecting multiple hazard gases. In this Letter, we demonstrate, for the first time to our knowledge, a harmonic-seeded switchable multi-wavelength laser in air driven by intense mid-infrared femtosecond laser pulses. Furthermore, population inversion in the multi-wavelength remote laser occurs at an ultrafast time-scale (i.e., less than ~200 fs) owing to direct formation of excited molecular nitrogen ions by strong-field ionization of inner-valence electrons, which is fundamentally different from the previously reported pumping mechanisms based either on electron recombination of ionized molecular nitrogen or on resonant two-photon excitation of atomic oxygen fragments resulting from resonant two-photon dissociation of molecular oxygen. The bright multi-wavelength laser in air opens the perspective for remote detection of multiple pollutants based on nonlinear spectroscopy.

preprint2009arXiv

Far-field Super-resolution Imaging with Dual-Dye-Doped Nanoparticles

We propose to achieve super-resolution in far-field imaging by use of dual-dye-doped nanoparticles. The nanoparticles with a diameter of a few nanometers are co-doped with two types of dye molecules, namely, Cy3 and Cy5, at a controllable ratio. Due to the short distances between the dye molecules confined in the nanoparticles, Forster resonant energy transfer can occur between the Cy3 and Cy5 molecules with high efficiency. Therefore, the Cy5 molecules can quench the fluorescence emission from the Cy3 molecules in the outer region of focal spot of the excitation beam, thereby enhancing the resolution of imaging.

preprint2009arXiv

Wavelength scaling of high-order harmonic yield from an optically prepared excited state atom

Wavelength scaling law for the yield of high-order harmonic emission is theoretically examined for excited state atoms which are optically prepared by simultaneously exposing to an extreme ultraviolet pulse at the resonant wavelength and an infrared pulse at a variable wavelength in the range of 0.8\mum-2.4\mum. Numerical simulations are performed based on the three-dimensional time-dependent Schrodinger equation (3D TDSE) for Ne and H. We confirm that the harmonic yield follows a λ^-{4-6} scaling with the single fundamental driving laser pulse; whereas for the optically prepared excited state atoms, a λ^-{2-3} scaling for the harmonic yield is revealed.