Source author record

Vikram Passi

Vikram Passi appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

cond-mat.mtrl-sci cond-mat.mes-hall cond-mat.other

Catalog footprint

What is connected

3works

3topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2015arXiv

Spectral Sensitivity of Graphene/Silicon Heterojunction Photodetectors

We have studied the optical properties of two-dimensional (2D) Schottky photodiode heterojunctions made of chemical vapor deposited (CVD) graphene on n- and p-type Silicon (Si) substrates. Much better rectification behavior is observed from the diodes fabricated on n- Si substrates in comparison with the devices on p-Si substrates in dark condition. Also, graphene/n-Si photodiodes show a considerable responsivity of 270 mA/W within the silicon spectral range in DC reverse bias condition. The present results are furthermore compared with that of a molybdenum disulfide (MoS2)/p-type silicon photodiodes.

preprint2012arXiv

Anisotropic Vapor HF etching of silicon dioxide for Si microstructure release

Damages are created in a sacrificial layer of silicon dioxide by ion implantation to enhance the etch rate of silicon-dioxide in liquid and vapor phase hydrofluoric acid. The etch rate ratio between implanted and unimplanted silicon dioxide is more than 150 in vapor hydrofluoric acid (VHF). This feature is of interest to greatly reduce the underetch of microelectromechanical systems anchors. Based on the experimentally extracted etch rate of unimplanted and implanted silicon dioxide, the patterning of the sacrificial layer can be predicted by simulation.

preprint2011arXiv

A single layer hydrogen silsesquioxane (HSQ) based lift-off process for germanium and platinum

Primarily used as etch mask, single layer hydrogen silsesquioxane has never been investigated for lift-off technique. In this article, we propose a new technique where a single layer of hydrogen silsesquioxane, a negative tone electron beam resist, is used to make lift-off of germanium and platinum. Removal of exposed hydrogen silsesquioxane is tested for various concentrations of hydrofluoric acid. Ultrasonic agitation is also used to reduce the formation of flakes due to accumulation of matter (evaporated metal in our case) along the sidewalls of the lift-off narrow slots. Results demonstrate potential in applying the hydrogen silsesquioxane as a negative tone lift-off resist to pattern nanometer scale features into germanium and platinum layers.