Source author record

V. Cros

V. Cros appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

39works
7topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

39 published item(s)

preprint2022arXiv

Large interfacial Rashba interaction and giant spin-orbit torques in atomically thin metallic heterostructures

The ability of spin-orbit interactions to convert charge current into spin current, most often in the bulk of heavy metal thin films, has been the hallmark of spintronics in the last decade. In this study, we demonstrate how the insertion of light metal element interface profoundly affects both the nature of spin-orbit torque and its efficiency in terms of damping-like ($H_{\text{DL}}$) and field-like ($H_{\text{FL}}$) effective fields in ultrathin Co ferromagnet. Indeed, we measure unexpectedly large $H_{\text{FL}}$/$H_{\text{DL}}$ ratio ($\sim$2.5) upon inserting a 1.4 nm thin Al layer in Pt|Co|Al|Pt as compared to a similar stacking including Cu instead of Al. From our modelling, these results strongly evidence the presence of large Rashba interaction at Co|Al interface producing a giant $H_{\text{FL}}$, which was not expected from a metallic interface. The occurrence of such enhanced torques from an interfacial origin is further validated by demonstrating current-induced magnetization reversal showing a significant decrease of the critical current for switching.

preprint2021arXiv

Evidence for spin current driven Bose-Einstein condensation of magnons

The quanta of magnetic excitations - magnons - are known for their unique ability to undergo Bose-Einstein condensation at room temperature. This fascinating phenomenon reveals itself as a spontaneous formation of a macroscopic coherent state under the influence of incoherent stimuli. Spin currents have been predicted to offer electronic control of magnon Bose-Einstein condensates, but this phenomenon has not been experimentally evidenced up to now. Here we experimentally show that current-driven Bose-Einstein condensation can be achieved in nanometer-thick films of magnetic insulators with tailored dynamic magnetic nonlinearities and minimized magnon-magnon interactions. We demonstrate that, above a certain threshold, magnons injected by the spin current overpopulate the lowest-energy level forming a highly coherent spatially extended state. By accessing magnons with essentially different energies, we quantify the chemical potential of the driven magnon gas and show that, at the critical current, it reaches the energy of the lowest magnon level. Our results pave the way for implementation of integrated microscopic quantum magnonic and spintronic devices.

preprint2020arXiv

Spin-orbit-torque magnonics

The field of magnonics, which utilizes propagating spin waves for nano-scale transmission and processing of information, has been significantly advanced by the advent of the spin-orbit torque. The latter phenomenon can allow one to overcome two main drawbacks of magnonic devices - low energy efficiency of conversion of electrical signals into spin wave signals, and fast spatial decay of spin waves in thin-film waveguiding structures. At first glance, the excitation and amplification of spin waves by spin-orbit torques can seem to be straightforward. Recent research indicates, however, that the lack of the mode-selectivity in the interaction of spin currents with dynamic magnetic modes and the onset of dynamic nonlinear phenomena represent significant obstacles. Here, we discuss the possible route to overcoming these limitations, based on the suppression of nonlinear spin-wave interactions in magnetic systems with perpendicular magnetic anisotropy. We show that this approach enables efficient excitation of coherent magnetization dynamics and propagating spin waves in extended spatial regions, and is expected to enable practical implementation of complete compensation of spin-wave propagation losses.

preprint2020arXiv

Tailored flux pinning in superconductor/ferromagnet multilayers with engineered magnetic domain morphology from stripes to skyrmions

Superconductor/Ferromagnet (S/F) hybrid systems show interesting magneto-transport behaviors that result from the transfer of properties between both constituents. For instance, magnetic memory can be transferred from the F into the S through the pinning of superconducting vortices by the ferromagnetic textures. The ability to tailor this type of induced behavior is important to broaden its range of applications. Here we show that engineering the F magnetization reversal allows tuning the strength of the vortex pinning (and memory) effects, as well as the field range in which they appear. This is done by using magnetic multilayers in which Co thin films are combined with different heavy metals (Ru, Ir, Pt). By choosing the materials, thicknesses, and stacking order of the layers, we can design the characteristic domain size and morphology, from out-of-plane magnetized stripe domains to much smaller magnetic skyrmions. These changes strongly affect the magneto-transport properties. The underlying mechanisms are identified by comparing the experimental results to a magnetic pinning model.

preprint2020arXiv

The 2020 Skyrmionics Roadmap

The notion of non-trivial topological winding in condensed matter systems represents a major area of present-day theoretical and experimental research. Magnetic materials offer a versatile platform that is particularly amenable for the exploration of topological spin solitons in real space such as skyrmions. First identified in non-centrosymmetric bulk materials, the rapidly growing zoology of materials systems hosting skyrmions and related topological spin solitons includes bulk compounds, surfaces, thin films, heterostructures, nano-wires and nano-dots. This underscores an exceptional potential for major breakthroughs ranging from fundamental questions to applications as driven by an interdisciplinary exchange of ideas between areas in magnetism which traditionally have been pursued rather independently. The skyrmionics roadmap provides a review of the present state of the art and the wide range of research directions and strategies currently under way. These are, for instance, motivated by the identification of the fundamental structural properties of skyrmions and related textures, processes of nucleation and annihilation in the presence of non-trivial topological winding, an exceptionally efficient coupling to spin currents generating spin transfer torques at tiny current densities, as well as the capability to purpose-design broad-band spin dynamic and logic devices.

preprint2019arXiv

Quantitative imaging of hybrid chiral spin textures in magnetic multilayer systems by Lorentz microscopy

Chiral magnetic textures in ultrathin perpendicularly magnetised multilayer film stacks with an interfacial Dzyaloshinskii-Moriya interaction have been the focus of much research recently. The chirality associated with the broken inversion symmetry at the interface between an ultrathin ferromagnetic layer and a heavy metal with large spin-orbit coupling supports homochiral Néel domain walls and hedgehog (Néel) skyrmions. Under spin-orbit torques these Néel type magnetic structures are predicted, and have been measured, to move at high velocities. However recent studies have indicated that some multilayered systems may possess a more complex hybrid domain wall configuration, due to the competition between interfacial DMI and interlayer dipolar fields. These twisted textures are expected to have thickness dependent Néel and Bloch contributions to the domain or skyrmion walls. In this work, we use the methods of Lorentz microscopy to measure quantitatively for the first time experimentally both; i) the contributions of the Néel and Bloch contributions and ii) their spatial spin variation at high resolution. These are compared with modelled and simulated structures which are in excellent agreement with our experimental results. Our quantitative analysis provides powerful direct evidence of the Bloch wall component which exists in these hybrid walls and will be significant when exploiting such phenomena in spintronic applications.

preprint2016arXiv

A skyrmion-based spin-torque nano-oscillator

A model for a spin-torque nano-oscillator based on the self-sustained oscillation of a magnetic skyrmion is presented. The system involves a circular nanopillar geometry comprising an ultrathin film free magnetic layer with a strong Dzyaloshinkii-Moriya interaction and a polariser layer with a vortex-like spin configuration. It is shown that spin-transfer torques due to current flow perpendicular to the film plane leads to skyrmion gyration that arises from a competition between geometric confinement due to boundary edges and the vortex-like polarisation of the spin torques. A phenomenology for such oscillations is developed and quantitative analysis using micromagnetics simulations is presented. It is also shown that weak disorder due to random anisotropy variations does not influence the main characteristics of the steady-state gyration.

preprint2016arXiv

Controlling the phase locking of unstable magnetic bits for ultra-low power computation

When fabricating magnetic memories, one of the main challenges is to maintain the bit stability while downscaling. Indeed, for magnetic volumes of a few thousand nm3, the energy barrier between magnetic configurations becomes comparable to the thermal energy at room temperature. Then, switches of the magnetization spontaneously occur. These volatile, superparamagnetic nanomagnets are generally considered useless. But what if we could use them as low power computational building blocks? Remarkably, they can oscillate without the need of any external dc drive, and despite their stochastic nature, they can beat in unison with an external periodic signal. Here we show that the phase locking of superparamagnetic tunnel junctions can be induced and suppressed by electrical noise injection. We develop a comprehensive model giving the conditions for synchronization, and predict that it can be achieved with a total energy cost lower than 10-^13 J. Our results open the path to ultra-low power computation based on the controlled synchronization of oscillators.

preprint2016arXiv

Direct observation of dynamic modes excited in a magnetic insulator by pure spin current

Excitation of magnetization dynamics by pure spin currents has been recently recognized as an enabling mechanism for spintronics and magnonics, which allows implementation of spin-torque devices based on low-damping insulating magnetic materials. Here we report the first spatially-resolved study of the dynamic modes excited by pure spin current in nanometer-thick microscopic insulating Yttrium Iron Garnet disks. We show that these modes exhibit nonlinear self-broadening preventing the formation of the self-localized magnetic bullet, which plays a crucial role in the stabilization of the single-mode magnetization oscillations in all-metallic systems. This peculiarity associated with the efficient nonlinear mode coupling in low-damping materials can be among the main factors governing the interaction of pure spin currents with the dynamic magnetization in high-quality magnetic insulators.

preprint2016arXiv

Disruptive effect of Dzyaloshinskii-Moriya interaction on the MRAM cell performance

In order to increase the thermal stability of a magnetic random access memory (MRAM) cell, materials with high spin-orbit interaction are often introduced in the storage layer. As a side effect, a strong Dzyaloshinskii-Moriya interaction (DMI) may arise in such systems. Here we investigate the impact of DMI on the magnetic cell performance, using micromagnetic simulations. We find that DMI strongly promotes non-uniform magnetization states and non-uniform switching modes of the magnetic layer. It appears to be detrimental for both the thermal stability of the cell and its switching current, leading to considerable deterioration of the cell performance even for a moderate DMI amplitude.

preprint2016arXiv

Spin wave amplification using the spin Hall effect in permalloy/platinum bilayers

We investigate the effect of an electrical current on the attenuation length of a 900 nm wavelength spin-wave in a permalloy/Pt bilayer using propagating spin-wave spectroscopy. The modification of the spin-wave relaxation rate is linear in current density, reaching up to 14% for a current density of 2.3$\times10^{11} $A/m$^2$ in Pt. This change is attributed to the spin transfer torque induced by the spin Hall effect and corresponds to an effective spin Hall angle of 0.13, which is among the highest values reported so far. The spin Hall effect thus appears as an efficient way of amplifying/attenuating propagating spin waves.

preprint2015arXiv

A Dzyaloshinskii-Moriya Anisotropy in Nanomagnets with in-plane Magnetization

We report on a new source of in-plane anisotropy in nanomagnets due to the presence of Dzyaloshinskii-Moriya interaction (DMI). This anisotropy depends on the shape of the magnet, and is orthogonal to the demagnetization shape anisotropy. This effect originates from the DMI energy reduction due to an out-of-plane tilt of the spins at edges oriented perpendicular to the magnetization. Our investigation combining experimental, numerical and analytical results demonstrate that this energy reduction can compensate the demagnetization shape anisotropy energy in magnets of elongated shape, provided that their volumes is small enough and thus that their magnetization is quasi-uniform.

preprint2015arXiv

Efficient Synchronization of Dipolarly Coupled Vortex-Based Spin Transfer Nano-Oscillators

Due to their nonlinear properties, spin transfer nano-oscillators can easily adapt their frequency to external stimuli. This makes them interesting model systems to study the effects of synchronization and brings some opportunities to improve their microwave characteristics in view of their applications in information and communication technologies and to design innovative computing architectures. So far, mutual synchronization of spin transfer nano-oscillators through propagating spin-waves and exchange coupling in a common magnetic layer has been demonstrated. Here we show that the dipolar interaction is also an efficient mechanism to synchronize neighbouring oscillators. We experimentally study a pair of vortex-based spin-transfer nano-oscillators, in which mutual synchronization can be achieved despite a significant frequency mismatch between oscillators. Importantly, the coupling efficiency is controlled by the magnetic configuration of the vortices, as confirmed by an analytical model highlighting the physics at play in the synchronization process as well as by micromagnetic simulations.

preprint2015arXiv

Large amplitude vortex gyration in Permalloy/Bi$_2$Se$_3$-like heterostructures

We consider the excitation of large amplitude gyrotropic vortex core precession in a Permalloy nanodisk by the torques originating from the in-plane microwave current flowing along the interface of the Permalloy/Bi$_2$Se$_3$ heterostructures, in which the huge charge-to-spin conversion ratio is observed \cite{Mellnik-2014}. We consider analytically and by micromagnetic modelling the dependence of this excitation on the frequency and magnitude of the microwave current. The analogies of the vortex dynamics and the Landau phase transitions theory is demonstrated. These findings open the possibility to excite gyrotropic vortex motion with the current densities far lower than by any other means.

preprint2015arXiv

Optimizing magneto-dipolar interactions for synchronizing vortex based spin-torque nano-oscillators

We report on a theoretical study about the magneto-dipolar coupling and synchronization between two vortex-based spin-torque nano-oscillators. In this work we study the dependence of the coupling efficiency on the relative magnetization parameters of the vortices in the system. For that purpose, we combine micromagnetic simulations, Thiele equation approach, and analytical macro-dipole approximation model to identify the optimized configuration for achieving phase-locking between neighboring oscillators. Notably, we compare vortices configurations with parallel (P) polarities and with opposite (AP) polarities. We demonstrate that the AP core configuration exhibits a coupling strength about three times larger than in the P core configuration.

preprint2015arXiv

Self-injection locking of a vortex spin torque oscillator by delayed feedback

The self-synchronization of spin torque oscillators is investigated experimentally by re-injecting its radiofrequency (rf) current after a certain delay time. We demonstrate that the emission power and the spectral linewidth are improved for optimal delay times. Moreover by varying the phase difference between the emitted power and the re-injected one, we find a clear oscillatory dependence with a 2π periodicity of the frequency of the oscillator as well as its power and linewidth. Such periodical behavior within the self-injection regime is well described by the general model of nonlinear auto-oscillators including not only a delayed rf current but also all spin torque forces responsible for the self-synchronization. Our results reveal new approaches for controlling the non-autonomous dynamics of spin torque oscillators, a key issue for rf spintronics applications as well as for the development of neuro-inspired spin-torque oscillators based devices.

preprint2015arXiv

Spin torque resonant vortex core expulsion for an efficient radio-frequency detection scheme

Spin-polarised radio-frequency currents, whose frequency is equal to that of the gyrotropic mode, will cause an excitation of the core of a magnetic vortex confined in a magnetic tunnel junction. When the excitation radius of the vortex core is greater than that of the junction radius, vortex core expulsion is observed, leading to a large change in resistance, as the layer enters a predominantly uniform magnetisation state. Unlike the conventional spin-torque diode effect, this highly tunable resonant effect will generate a voltage which does not decrease as a function of rf power, and has the potential to form the basis of a new generation of tunable nanoscale radio-frequency detectors.

preprint2014arXiv

Electronic control of the spin-wave damping in a magnetic insulator

It is demonstrated that the decay time of spin-wave modes existing in a magnetic insulator can be reduced or enhanced by injecting an in-plane dc current, $I_\text{dc}$, in an adjacent normal metal with strong spin-orbit interaction. The demonstration rests upon the measurement of the ferromagnetic resonance linewidth as a function of $I_\text{dc}$ in a 5~$μ$m diameter YIG(20nm){\textbar}Pt(7nm) disk using a magnetic resonance force microscope (MRFM). Complete compensation of the damping of the fundamental mode is obtained for a current density of $\sim 3 \cdot 10^{11}\text{A.m}^{-2}$, in agreement with theoretical predictions. At this critical threshold the MRFM detects a small change of static magnetization, a behavior consistent with the onset of an auto-oscillation regime.

preprint2013arXiv

Inverse Spin Hall Effect in nanometer-thick YIG/Pt system

High quality nanometer-thick (20 nm, 7 nm and 4 nm) epitaxial YIG films have been grown on GGG substrates using pulsed laser deposition. The Gilbert damping coefficient for the 20 nm thick films is 2.3 x 10-4 which is the lowest value reported for sub-micrometric thick films. We demonstrate Inverse spin Hall effect (ISHE) detection of propagating spin waves using Pt. The amplitude and the lineshape of the ISHE voltage correlate well to the increase of the Gilbert damping when decreasing thickness of YIG. Spin Hall effect based loss-compensation experiments have been conducted but no change in the magnetization dynamics could be detected.

preprint2013arXiv

Non-Adlerian synchronization of dipolar coupled vortex Spin-Torque Nano-Oscillators

We investigate analytically and numerically the synchronization dynamics of dipolarly coupled vortex based Spin-Torque Nano Oscillators (STNO) with different pillar diameters. We identify the critical interpillar distances on which synchronization occurs as a function of their diameter mismatch. We obtain numerically a phase diagram showing the transition between unsynchronized and synchronized states and compare it to analytical predictions we make using Thiele approach. Our study demonstrates that for relatively small diameters differences the synchronization dynamics can be described qualitatively using Adler equation. However when the diameters difference increases significantly, the system becomes strongly non-Adlerian.

preprint2013arXiv

Parallel pumping of magnetic vortex gyrations in spin-torque nano-oscillators

We experimentally demonstrate that large magnetic vortex oscillations can be parametrically excited in a magnetic tunnel junction by the injection of radio-frequency (rf) currents at twice the natural frequency of the gyrotropic vortex core motion. The mechanism of excitation is based on the parallel pumping of vortex motion by the rf orthoradial field generated by the injected current. Theoretical analysis shows that experimental results can be interpreted as the manifestation of parametric amplification when rf current is small, and of parametric instability when rf current is above a certain threshold. By taking into account the energy nonlinearities, we succeed to describe the amplitude saturation of vortex oscillations as well as the coexistence of stable regimes.

preprint2013arXiv

Perfect and robust phase-locking of a spin transfer vortex nano-oscillator to an external microwave source

We study the synchronization of the auto-oscillation signal generated by the spin transfer driven dynamics of two coupled vortices in a spin-valve nanopillar to an external source. Phase-locking to the microwave field hrf occurs in a range larger than 10% of the oscillator frequency for drive amplitudes of only a few Oersteds. Using synchronization at the double frequency, the generation linewidth is found to decrease by more than five orders of magnitude in the phase-locked regime (down to 1 Hz, limited by the resolution bandwidth of the spectrum analyzer) in comparison to the free running regime (140 kHz). This perfect phase-locking holds for frequency detuning as large as 2 MHz, which proves its robustness. We also analyze how the free running spectral linewidth impacts the main characteristics of the synchronization regime.

preprint2013arXiv

Single spin-torque vortex oscillator using combined bottom-up approach and e-beam lithography

A combined bottom-up assembly of electrodeposited nanowires and electron beam lithography technique has been developed to investigate the spin transfer torque and microwave emission on specially designed nanowires containing a single Co/Cu/Co pseudo spin valve. Microwave signals have been obtained even at zero magnetic field. Interestingly, high frequency vs. magnetic field tunability was demonstrated, in the range 0.4 - 2 MHz/Oe, depending on the orientation of the applied magnetic field relative to the magnetic layers of the pseudo spin valve. The frequency values and the emitted signal frequency as a function of the external magnetic field are in good quantitative agreement with the analytical vortex model as well as with micromagnetic simulations.

preprint2012arXiv

Matching domain wall configuration and spin-orbit torques for very efficient domain-wall motion

In our numerical study, we identify the best conditions for efficient domain wall motion by spin-orbit torques originating from the Spin Hall effect or Rashba effect. We demonstrate that the effect depends critically on the domain wall configuration, the current injection scheme and the symmetry of the spin-orbit torque. The best identified configuration corresponds to a Néel wall driven by spin Hall Effect in a narrow strip with perpendicular magnetic anisotropy. In this case, the domain wall velocity can be a factor of 10 larger than that for the conventional current-in-plane spin-transfer torque.

preprint2012arXiv

Phase locking dynamics of dipolarly coupled vortex-based spin transfer oscillators

Phase locking dynamics of dipolarly coupled vortices excited by spin-polarized current in two identical nanopillars is studied as a function of the interpillar distance L. Numerical study and analytical model have proved the remarkable efficiency of magneto-static interaction to achieve phase locking. Investigating the dynamics in the transient regime towards phase locking, we extract the evolution of the locking time τ, the coupling strength μ and the interaction energy W. Finally, we compare this coupling energy with the one obtained by simple model.

preprint2012arXiv

Quantitative MRFM characterization of the autonomous and forced dynamics in a spin transfer nano-oscillator

Using a magnetic resonance force microscope (MRFM), the power emitted by a spin transfer nano-oscillator consisting of a normally magnetized Py$|$Cu$|$Py circular nanopillar is measured both in the autonomous and forced regimes. From the power behavior in the subcritical region of the autonomous dynamics, one obtains a quantitative measurement of the threshold current and of the noise level. Their field dependence directly yields both the spin torque efficiency acting on the thin layer and the nature of the mode which first auto-oscillates: the lowest energy, spatially most uniform spin-wave mode. From the MRFM behavior in the forced dynamics, it is then demonstrated that in order to phase-lock this auto-oscillating mode, the external source must have the same spatial symmetry as the mode profile, i.e., a uniform microwave field must be used rather than a microwave current flowing through the nanopillar.

preprint2012arXiv

Reversal process of a magnetic vortex core under the combined action of a perpendicular field and spin transfer torque

In a nanopillar with dipolarly coupled vortices, we present an experimental and simulation study to understand how the interplay between the bias field and spin transfer torque impacts reversal of the vortex cores. We find that, depending on the current values, vortex cores might experience different physical mechanisms for their reversal, namely a static or a dynamic switching. We believe that our results might be useful in the context of vortex based non volatile memories, as a current controlled selective core switching is proposed.

preprint2011arXiv

Spin-Torque Diode Measurements of MgO-Based Magnetic Tunnel Junctions with Asymmetric Electrodes

We present a detailed study of the spin-torque diode effect in CoFeB/MgO/CoFe/NiFe magnetic tunnel junctions. From the evolution of the resonance frequency with magnetic field at different angles, we clearly identify the free-layer mode and find an excellent agreement with simulations by taking into account several terms for magnetic anisotropy. Moreover, we demonstrate the large contribution of the out-of-plane torque in our junctions with asymmetric electrodes compared to the in-plane torque. Consequently, we provide a way to enhance the sensitivity of these devices for the detection of microwave frequency.

preprint2011arXiv

Temperature dependence of microwave voltage emission associated to spin-transfer induced vortex oscillation in magnetic tunnel junction

The temperature dependence of a vortex-based nano-oscillator induced by spin transfer torque (STVO) in magnetic tunnel junctions (MTJ) is considered. We obtain emitted signals with large output power and good signal coherence. Due to the reduced non-linearities compared to the uniform magnetization case, we first observe a linear decrease of linewidth with decreasing temperature. However, this expected behavior no longer applies at lower temperature and a bottom limit of the linewidth is measured.

preprint2011arXiv

Vertical current induced domain wall motion in MgO-based magnetic tunnel junction with low current densities

Shifting electrically a magnetic domain wall (DW) by the spin transfer mechanism is one of the future ways foreseen for the switching of spintronic memories or registers. The classical geometries where the current is injected in the plane of the magnetic layers suffer from a poor efficiency of the intrinsic torques acting on the DWs. A way to circumvent this problem is to use vertical current injection. In that case, theoretical calculations attribute the microscopic origin of DW displacements to the out-of-plane (field-like) spin transfer torque. Here we report experiments in which we controllably displace a DW in the planar electrode of a magnetic tunnel junction by vertical current injection. Our measurements confirm the major role of the out-of-plane spin torque for DW motion, and allow to quantify this term precisely. The involved current densities are about 100 times smaller than the one commonly observed with in-plane currents. Step by step resistance switching of the magnetic tunnel junction opens a new way for the realization of spintronic memristive devices.

preprint2010arXiv

Dynamics of two coupled vortices in a spin valve nanopillar excited by spin transfer torque

We investigate the dynamics of two coupled vortices driven by spin transfer. We are able to independently control with current and perpendicular field, and to detect, the respective chiralities and polarities of the two vortices. For current densities above $J=5.7*10^7 A/cm^2$, a highly coherent signal (linewidth down to 46 kHz) can be observed, with a strong dependence on the relative polarities of the vortices. It demonstrates the interest of using coupled dynamics in order to increase the coherence of the microwave signal. Emissions exhibit a linear frequency evolution with perpendicular field, with coherence conserved even at zero magnetic field.

preprint2010arXiv

Large microwave generation from d.c. driven magnetic vortex oscillators in magnetic tunnel junctions

Spin polarized current can excite the magnetization of a ferromagnet through the transfer of spin angular momentum to the local spin system. This pure spin-related transport phenomena leads to alluring possibilities for the achievement of a nanometer scale, CMOS compatible and tunable microwave generator operating at low bias for future wireless communications. Microwave emission generated by the persitent motion of magnetic vortices induced by spin transfer effect seems to be a unique manner to reach appropriate spectral linewidth. However, in metallic systems, where such vortex oscillations have been observed, the resulting microwave power is much too small. Here we present experimental evidences of spin-transfer induced core vortex precessions in MgO-based magnetic tunnel junctions with similar good spectral quality but an emitted power at least one order of magnitude stronger. More importantly, unlike to others spin transfer excitations, the thorough comparison between experimental results and models provide a clear textbook illustration of the mechanisms of vortex precessions induced by spin transfer.

preprint2010arXiv

Non-uniformity of a planar polarizer as a reason of spin-transfer induced vortex oscillations at zero field

We discuss a possible mechanism of the spin-transfer induced oscillations of a vortex in the free layer of spin-valve nanostructures, in which the polarizer layer has a planar magnetization. We demonstrate that if such planar polarizer is essentially non-uniform, steady gyrotropic vortex motion with large amplitude can be excited. The best excitation efficiency is obtained for a circular magnetization distribution in the polarizer. In this configuration, the conditions for the onset of the oscillations depend on the vortex chirality but not on the direction of its core.

preprint2010arXiv

Phase locking of vortex based spin transfer oscillators to a microwave current

Phase locking experiments on vortex based spin transfer oscillators with an external microwave current are performed. We present clear evidence of phase locking, frequency pulling, as well as fractional synchronization in this system, with a minimum peak linewidth of only 3 kHz in the locked state. We find that locking ranges of the order of 1/3 of the oscillator frequency are easily achievable because of the large tunability $\partial f/\partial I_{dc}$ observed in our vortex based systems. Such large locking ranges allow us to demonstrate the simultaneous phase locking of two independent oscillators connected in series with the external source.

preprint2009arXiv

Frequency converter based on nanoscale MgO magnetic tunnel junctions

We observe both dc voltage rectification and frequency conversion that occur when a reference microwave current is injected to a MgO based magnetic tunnel junction (MTJ). The rectification that is spin-transfer torque dependent is observed when the frequency of the input microwave current coincides with the resonance frequency of the magnetization of the active layer. In addition, we demonstrate that frequency conversion is the result of amplitude modulation between the reference signal and the resistance of the MTJ that is fluctuating at the resonance frequency of the magnetization of the active layer.

preprint2009arXiv

Origin of the spectral linewidth in non linear oscillators based on MgO tunnel junctions

We demonstrate the strong impact of the oscillator agility on the line broadening by studying spin transfer induced microwave emission in MgO-based tunnel junctions with current. The linewidth is almost not affected by decreasing the temperature. At very low currents, a strong enhancement of the linewidth at low temperature is attributed to an increase of the non linearity, probably due to the field-like torque. Finally we evidence that the noise is not dominated by thermal fluctuations but rather by the chaotization of the magnetization system induced by the spin transfer torque.

preprint2009arXiv

Vortex oscillations induced by a spin-polarized current in a magnetic nanopillar: Evidence for a failure of the Thiele approach

We investigate the vortex excitations induced by a spin-polarized current in a magnetic nanopillar by means of micromagnetic simulations and analytical calculations. Damped motion, stationary vortex rotation and the switching of the vortex core are successively observed for increasing values of the current. We demonstrate that even for small amplitude of the vortex motion, the analytical description based the classical Thiele approach can yield quantitatively and qualitatively unsound results. We suggest and validate a new analytical technique based on the calculation of the energy dissipation.

preprint2007arXiv

Shaped angular dependence of the spin transfer torque and microwave generation without magnetic field

The generation of oscillations in the microwave frequency range is one of the most important applications expected from spintronics devices exploiting the spin transfer phenomenon. We report transport and microwave power measurements on specially designed nanopillars for which a non-standard angular dependence of the spin transfer torque (wavy variation) is predicted by theoretical models. We observe a new kind of current-induced dynamics that is characterized by large angle precessions in the absence of any applied field, as this is also predicted by simulation with such a wavy angular dependence of the torque. This type of non-standard nanopillars can represent an interesting way for the implementation of spin transfer oscillators since they are able to generate microwave oscillations without applied magnetic field. We also emphasize the theoretical implications of our results on the angular dependence of the torque.

preprint2003arXiv

Nanolithography based on real-time electrically-controlled indentation with an atomic force microscope for nanocontacts elaboration

We report on the fabrication of nanocontacts by indentation of an ultrathin insulating photoresist layer deposited on various types of conductive structures. A modified atomic force microscope (AFM) designed for local resistance measurements is used as a nanoindenter. The nanoindentation is performed while measuring continuously the resistance between the conductive tip of the AFM and the conductive layer, which is used as the trigger parameter to stop the indentation. This allows an extremely accurate control of the indentation process. The indented hole is subsequently filled by a metal to create a contact on the underlying layer. We show that nanocontacts in the range of 1 to 10 nm2 can be created with this technique.