Source author record

Seung-Woo Hong

Seung-Woo Hong appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

nucl-ex nucl-th physics.ins-det astro-ph.CO physics.acc-ph physics.comp-ph physics.med-ph

Catalog footprint

What is connected

7works

7topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2024arXiv

Elastic p-12C scattering by using a cluster effective field theory

The elastic p-12C scattering at low energies is studied by using a cluster effective field theory (EFT), where the low-lying resonance states (s1/2, p3/2, d5/2) of 13N are treated as pertinent degrees of freedom. The low-energy constants of the Lagrangian are expressed in terms of the Coulomb-modified effective range parameters, which are determined to reproduce the experimental data for the differential cross-sections. The resulting theoretical predictions agree very well with the experimental data. The resulting theory is shown to give us almost identical phase shifts as obtained from the R-matrix approach. The role of the ground state of 13N below the threshold and the next-to-leading order in the EFT power counting are also discussed.

preprint2022arXiv

Semi-empirical model to determine pre- and post-neutron fission product yields and neutron multiplicity

Post-neutron emission fission product mass distributions are calculated by using pre-neutron emission fission product yields (FPYs) and neutron multiplicity. A semi-empirical model is used to calculate the pre-neutron FPY, first. Then the neutron multiplicity for each fission fragment mass is used to convert the pre-neutron FPY to the post-neutron FPY. In doing so, assumptions are made for the probability for a pre-emission fission fragment with a mass number $A^*$ to decay to a post-emission fragment with a mass number $A$. The resulting post-neutron FPYs are compared with the data available. The systems where the experimental data of not only the pre- and post-neutron FPY but also neutron multiplicity are available are the thermal neutron-induced fission of $^{233}$U, $^{235}$U and $^{239}$Pu. Thus, we applied the model calculations to these systems and compared the calculation results with those from the GEF and the data from the ENDF and the EXFOR libraries. Both the pre- and post-neutron fission product mass distributions calculated by using the semi-empirical model and the neutron multiplicity reproduce the overall features of the experimental data.

preprint2020arXiv

Effects of transient non-thermal particles on the big bang nucleosynthesis

The effects of introducing a small amount of non-thermal distribution (NTD) of elements in big bang nucleosynthesis (BBN) are studied by allowing a fraction of the NTD to be time-dependent so that it contributes only during a certain period of the BBN evolution. The fraction is modeled as a Gaussian-shaped function of $\log(T)$, where $T$ is the temperature of the cosmos, and thus the function is specified by three parameters; the central temporal position, the width and the magnitude. The change in the average nuclear reaction rates due to the presence of the NTD is assumed to be proportional to the Maxwellian reaction rates but with temperature $T_{\rm NTD} \equiv ζT$, $ζ$ being another parameter of our model. By scanning a wide four-dimensional parametric space at about half a million points, we have found about 130 points with $χ^2< 1$, at which the predicted primordial abundances of light elements are consistent with the observations. The magnitude parameter $\varepsilon_0$ of these points turns out to be scattered over a very wide range from $\varepsilon_0 \sim 10^{-19}$ to $\sim 10^{-1}$, and the $ζ$-parameter is found to be strongly correlated with the magnitude parameter $\varepsilon_0$. The temperature region with $0.3\times 10^9 \mbox{K} \lesssim T \lesssim 0.4\times 10^9 \mbox{K}$ or the temporal region $t\simeq 10^3$ s seems to play a central role in lowering $χ^2$.

preprint2016arXiv

Development of the MICROMEGAS Detector for Measuring the Energy Spectrum of Alpha Particles by using a 241-Am Source

We have developed MICROMEGAS (MICRO MEsh GASeous) detectors for detecting α particles emitted from an 241-Am standard source. The voltage applied to the ionization region of the detector is optimized for stable operation at room temperature and atmospheric pressure. The energy of α particles from the 241-Am source can be varied by changing the flight path of the α particle from the 241 Am source. The channel numbers of the experimentally-measured pulse peak positions for different energies of the α particles are associated with the energies deposited by the alpha particles in the ionization region of the detector as calculated by using GEANT4 simulations; thus, the energy calibration of the MICROMEGAS detector for α particles is done. For the energy calibration, the thickness of the ionization region is adjusted so that α particles may completely stop in the ionization region and their kinetic energies are fully deposited in the region. The efficiency of our MICROMEGAS detector for α particles under the present conditions is found to be ~ 97.3 %.

preprint2015arXiv

Yield estimation of neutron-rich rare isotopes induced by 200 MeV/u $^{132}$Sn beams by using GEANT4

A so-called "two-step reaction scheme", in which neutron-rich rare isotopes obtained from ISOL are post-accelerated and bombarded on a second target, is employed to estimate the production yields of exotic rare isotopes. The production yields of neutron-rich rare isotope fragments induced by 200 MeV/u $^{132}$Sn beams bombarded on a $^{9}$Be target are estimated with Monte Carlo code, GEANT4. To substantiate the use of GEANT4 for this study, benchmark calculations are done for 80 MeV/u $^{59}$Co, 95 MeV/u $^{72}$Zn, 500 MeV/u $^{92}$Mo, and 950 MeV/u $^{132}$Sn beams on the $^{9}$Be target. It is found that $^{132}$Sn beams can produce neutron-rich rare isotopes with 45 $\leq$ Z $\leq$ 50 more effectively than $^{238}$U beams at the same energy per nucleon.

preprint2014arXiv

GEANT4 and PHITS simulations of the shielding of neutrons from $^{252}$Cf source

Neutron shielding simulations by using GEANT4 and PHITS code are performed. As a neutron source, $^{252}$Cf is considered and the energy distribution of the neutrons emitted from $^{252}$Cf is assumed the Watt fission spectrum. The neutron dose equivalent rates with and without the shield are estimated for shielding materials such as graphite, iron, polyethylene, NS-4-FR and KRAFTON-HB. For the neutron shielding simulations by using GEANT4, high precision (G4HP) model with G4NDL 4.2 based on ENDF-VII data are used. And for PHITS simulations, JENDL-4.0 library are used for the same purpose. It is found that differences between the shielding calculations by using GEANT4 with G4NDL 4.2 and PHITS with JENDL-4.0 library are not significant for all cases considered in this work. We investigate the accuracy of the neutron dose equivalent rates obtained from GEANT4 and PHITS by comparing our simulation results with experimental data and other values calculated earlier. Calculated neutron dose equivalent rates agree well with the experimental dose equivalent rates within 20% errors except for polyethylene. For polyethylene material, discrepancy between the calculations and the experiments are up to 40% but all simulations show consistent features.

preprint2013arXiv

Percentage depth dose distributions in inhomogeneous phantoms with lung and bone equivalent media for small fields of CyberKnife

The percentage depth dose distributions in inhomogeneous phantoms with lung and bone equivalent media are studied. For lung equivalent media a Balsa wood is used, and for a soft bone equivalent media a compound material with epoxy resin, hardener and calcium carbonate is used. Polystyrene slabs put together with these materials are used as an inhomogeneous phantom. Dose measurements are performed with Gafchromic EBT film by using photon beams from 6MV CyberKnife at the Seoul Uridul Hospital. The cone sizes of the photon beams are varied from 5, 10 to 30 mm. As a simulation tool GEANT4 Monte Carlo code v9.4.p02 is used. When the Balsa wood is inserted in the phantom, the dose measured with EBT film is found to be significantly different from the dose without the EBT film in and beyond the Balsa wood region, particularly for small field sizes. On the other hand, when the soft bone equivalent material is inserted in the phantom, discrepancy between the dose measured with EBT film and the dose without EBT film can be seen only in the region of bone equivalent material. GEANT4 simulations are done with and without the EBT film to compare the simulation results with measurements. We find that the simulations including EBT film agree with the measurements for all the cases within an error of $2.2\%$. Also, we find the "doses to phantom" without the EBT film differ from the "doses to film" up to $29\%$, which shows that for accurate dose estimations for inhomogeneous phantoms with EBT film the presence of the EBT film needs to be taken into account properly in particular for small fields.