BZPEERPapers, people, evidence and research pathsDiscover
Research tools
Network
Opportunities
Account
Source author record
Paolo Saracco appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.
Catalog footprint
Research graph
Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.
BZPEER is loading the nearby papers, people, topics and institutions for this page.
Published work
We prove that a quasi-bialgebra admits a preantipode if and only if the associated free quasi-Hopf bimodule functor is Frobenius, if and only if the relative (opmonoidal) monad is a Hopf monad. The same results hold in particular for a bialgebra, tightening the connection between Hopf and Frobenius properties.
We discuss globalization for geometric partial comodules in a monoidal category with pushouts and we provide a concrete procedure to construct it, whenever it exists. The mild assumptions required by our approach make it possible to apply it in a number of contexts of interests, recovering and extending numerous ad hoc globalization constructions from the literature in some cases and providing obstruction for globalization in some other cases.
We investigate the property of being Frobenius for some functors strictly related with Hopf modules over a bialgebra and how this property reflects on the latter. In particular, we characterize one-sided Hopf algebras with anti-(co)multiplicative one-sided antipode as those for which the free Hopf module functor is Frobenius. As a by-product, this leads us to relate the property of being an FH-algebra (in the sense of Pareigis) for a given bialgebra with the property of being Frobenius for certain naturally associated functors.
Categorical aspects of the theory of modules over trusses are studied. Tensor product of modules over trusses is defined and its existence established. In particular, it is shown that bimodules over trusses form a monoidal category. Truss versions of the Eilenberg-Watts theorem and Morita equivalence are formulated. Projective and small-projective modules over trusses are defined and their properties studied.
Several sources of total cross sections for e$^+$e$^-$ pair production by photon interaction with matter, used by major Monte Carlo codes for particle transport, are quantitatively evaluated with respect to experimental measurements collected from the literature. They include data libraries deriving from theoretical calculations and analytical formulae representing empirical fits to tabulations. Although most of these sources of cross sections are based on one theoretical reference, the statistical data analysis documented in the paper highlights differences in their compatibility with experiment. The cross sections collected in the 1997 version of the Evaluated Photon Data Library (EPDL) exhibit the lowest incompatibility with experiment; the paper details the validation results for all the examined cross section sources. The scarcity of experimental data does not allow the validation process to discern pair production in the field of the nucleus and in the field of atomic electrons; nevertheless, the paper documents relevant clues regarding the contribution of the latter to reproduce experimental measurements.
We study the globalization of partial actions on sets and topological spaces and of partial coactions on algebras by applying the general theory of globalization for geometric partial comodules, as previously developed by the authors. We show that this approach does not only allow to recover all known results in these settings, but it allows to treat new cases of interest, too.
We report the discovery of MAGAZ3NE J095924+022537, a spectroscopically-confirmed protocluster at $z = 3.3665^{+0.0009}_{-0.0012}$ around a spectroscopically-confirmed $UVJ$-quiescent ultra-massive galaxy (UMG; $M_{\star}=2.34^{+0.23}_{-0.34}\times10^{11} {\rm M}_\odot$) in the COSMOS UltraVISTA field. We present a total of 38 protocluster members (14 spectroscopic and 24 photometric), including the UMG. Notably, and in marked contrast to protoclusters previously reported at this epoch which have been found to contain predominantly star-forming members, we measure an elevated fraction of quiescent galaxies relative to the coeval field ($73.3^{+26.7}_{-16.9}\%$ versus $11.6^{+7.1}_{-4.9}\%$ for galaxies with stellar mass $M_{\star} \geq 10^{11} {\rm M}_\odot$). This high quenched fraction provides a striking and important counterexample to the seeming ubiquitousness of star-forming galaxies in protoclusters at $z>2$ and suggests, rather, that protoclusters exist in a diversity of evolutionary states in the early Universe. We discuss the possibility that we might be observing either "early mass quenching" or non-classical "environmental quenching." We also present the discovery of MAGAZ3NE J100028+023349, a second spectroscopically-confirmed protocluster, at a very similar redshift of $z = 3.3801^{+0.0213}_{-0.0281}$. We present a total of 20 protocluster members, 12 of which are photometric and 8 spectroscopic including a post-starburst UMG ($M_{\star}=2.95^{+0.21}_{-0.20}\times10^{11} {\rm M}_\odot$). Protoclusters MAGAZ3NE J0959 and MAGAZ3NE J1000 are separated by 18 arcminutes on the sky (35 comoving Mpc), in good agreement with predictions from simulations for the size of "Coma"-type cluster progenitors at this epoch. It is highly likely that the two UMGs are the progenitors of Brightest Cluster Galaxies (BCGs) seen in massive virialized clusters at lower redshift.
We prove how the universal enveloping algebra constructions for Lie-Rinehart algebras and anchored Lie algebras are naturally left adjoint functors. This provides a conceptual motivation for the universal properties these constructions satisfy. As a supplement, the categorical approach offers new insights into the definitions of Lie-Rinehart algebra morphisms, of modules over Lie-Rinehart algebras and of the infinitesimal gauge algebra of a module.
This paper summarizes the current status of the electromagnetic data libraries, reviews recent experimental validation results, highlights open issues and introduces new perspectives for the future of these data libraries taking shape in the context of INFN research. Special emphasis is given to the characteristics of reliability, transparency and openness, along with opportunities for the improvement and the extension of the physics content.
This paper updates and complements a previously published evaluation of computational methods for total and partial cross sections, relevant to modeling the photoelectric effect in Monte Carlo particle transport. It examines calculation methods that have become available since the publication of the previous paper, some of which claim improvements over previous calculations; it tests them with statistical methods against the same sample of experimental data collected for the previous evaluation. No statistically significant improvements are observed with respect to the calculation method identified in the previous paper as the state of the art for the intended purpose, encoded in the EPDL97 data library. Some of the more recent computational methods exhibit significantly lower capability to reproduce experimental measurements than the existing alternatives.
Given a subgroup H of a finite group G, we begin a systematic study of the partial representations of G that restrict to global representations of H. After adapting several results from [DEP00] (which correspond to the case where H is trivial), we develop further an effective theory that allows explicit computations. As a case study, we apply our theory to the symmetric group and its subgroup of permutations fixing 1: this provides a natural extension of the classical representation theory of the symmetric group.
A differentially recursive sequence over a differential field is a sequence of elements satisfying a homogeneous differential equation with non-constant coefficients (namely, Taylor expansions of elements of the field) in the differential algebra of Hurwitz series. The main aim of this paper is to explore the space of all differentially recursive sequences over a given field with a non-zero differential. We show that these sequences form a two-sided vector space that admits, in a canonical way, a structure of Hopf algebroid over the subfield of constant elements. We prove that it is the direct limit, as a left comodule, of all spaces of formal solutions of linear differential equations and that it satisfies, as Hopf algebroid, an additional universal property. When the differential on the base field is zero, we recover the Hopf algebra structure of linearly recursive sequences.
We present spectra of the most massive quiescent galaxy yet discovered at $z>3$, spectroscopically confirmed via the detection of Balmer absorption features in the $H-$ and $K-$bands of Keck/MOSFIRE. The spectra confirm a galaxy with no significant ongoing star formation, consistent with the lack of rest-frame UV flux and overall photometric spectral energy distribution. With a stellar mass of $3.1^{+0.1}_{-0.2} \times 10^{11} ~\rm{M}_\odot$ at $z = 3.493$, this galaxy is nearly three times more massive than the highest redshift spectroscopically confirmed absorption-line identified galaxy known. The star-formation history of this quiescent galaxy implies that it formed $>1000 ~\rm{M}_\odot$/yr for almost 0.5 Gyr beginning at $z\sim7.2$, strongly suggestive that it is the descendant of massive dusty star-forming galaxies at $5<z<7$ recently observed with ALMA. While galaxies with similarly extreme stellar masses are reproduced in some simulations at early times, such a lack of ongoing star formation is not seen there. This suggests the need for a more rapid quenching process than is currently prescribed, challenging our current understanding of how ultra-massive galaxies form and evolve in the early Universe.
By a theorem of Majid, every monoidal category with a neutral quasi-monoidal functor to finitely-generated and projective $\Bbbk$-modules gives rise to a coquasi-bialgebra. We prove that if the category is also rigid, then the associated coquasi-bialgebra admits a preantipode, providing in this way an analogue for coquasi-bialgebras of Ulbrich's reconstruction theorem for Hopf algebras. When $\Bbbk$ is field, this allows us to characterize coquasi-Hopf algebras as well in terms of rigidity of finite-dimensional corepresentations.
Given a finitely generated and projective Lie-Rinehart algebra, we show that there is a continuous homomorphism of complete commutative Hopf algebroids between the completion of the finite dual of its universal enveloping Hopf algebroid and the associated convolution algebra. The topological Hopf algebroid structure of this convolution algebra is here clarified, by providing an explicit description of its topological antipode as well as of its other structure maps. Conditions under which that homomorphism becomes an homeomorphism are also discussed. These results, in particular, apply to the smooth global sections of any Lie algebroid over a smooth (connected) manifold and they lead a new formal groupoid scheme to enter into the picture. In the Appendix we develop the necessary machinery behind complete Hopf algebroid constructions, which involves also the topological tensor product of filtered bimodules over filtered rings.
In this paper we examine an alternative method for determining the neutron multiplication factor keff in fast subcritical reactors, based on the observable obtained by calculating the ratio between the ``fast`` component of the neutron flux (in this case by fast we mean neutrons with kinetic energy above 0.5 MeV) and the whole flux at all energies. The assumption behind the present study was that the above mentioned observable would be only sensitive to keff, provided a peripheral fuel rod is considered (i.e. far from the neutron source in subcritical systems) and keff is sufficiently high. Indeed, our results show that, for keff> 0.7, the ratio calculated for LFR or GFR models turns out to show a quite similar trend well approximated by a straight line, while a different slope is observed for a sodium reactor. In our opinion, the results obtained show that such observable, after appropriate calibrations on the real systems under consideration, may be used for determining keff in all operational conditions, in particular for subcritical systems with different types of neutron source and different values of the beam current.
In this paper we simulated the behavior of a simple ADS model, based on MOX fuel embedded in solid lead, in terms of multiplication coefficient keff, thermal power and absolute neutron spectra. In the first part of the paper, we report on the results obtained when modifying the reflector surrounding the fission core, by replacing pure lead with a layered graphite/lead structure. We found that, by appropriately choosing position and thickness of the graphite and lead layers, it is possible to obtain a hybrid system where the neutron spectrum in the core still exhibits a fast character, while the spectrum in the graphite layer is considerably softer, becoming thermal in the most peripheral positions. In order to obtain such a modulation of the neutron spectra from the center of the system to the periphery, a careful choice of the materials has to be made in order to avoid large variations of the local power at the core boundary. However, the smoothness of the power distribution is obtained at the expense of lower values of keff and the total power of the system. In the second part of the paper, we explored the option of adopting light water as coolant, instead of the helium gas assumed in the initial design. We found that this produces an increase in keff and thermal power, without significantly perturbing the fast character of the system and without introducing spatial power excursions in any place within the core. The characteristics obtained may allow to design a system where fast, mixed and thermal spectra can be used to expand the use of the ADS as an irradiation facility.
Evolutions of Geant4 code have affected the simulation of electron backscattering with respect to previously published results. Their effects are quantified by analyzing the compatibility of the simulated electron backscattering fraction with a large collection of experimental data for a wide set of physics configuration options available in Geant4. Special emphasis is placed on two electron scattering implementations first released in Geant4 version 10.2: the Goudsmit-Saunderson multiple scattering model and a single Coulomb scattering model based on Mott cross section calculation. The new Goudsmit-Saunderson multiple scattering model appears to perform equally or less accurately than the model implemented in previous Geant4 versions, depending on the electron energy. The new Coulomb scattering model was flawed from a physics point of view, but computationally fast in Geant4 version 10.2; the physics correction released in Geant4 version 10.2p01 severely degrades its computational performance. Evolutions in the Geant4 geometry domain have addressed physics problems observed in electron backscattering simulation in previous publications.
The adjoint equation was introduced in the early days of neutron transport and its solution, the neutron importance, has ben used for several applications in neutronics. The work presents at first a critical review of the adjoint neutron transport equation. Afterwards, the adjont model is constructed for a reference physical situation, for which an analytical approach is viable, i.e. an infinite homogeneous scattering medium. This problem leads to an equation that is the adjoint of the slowing-down equation that is well-known in nuclear reactor physics. A general closed-form analytical solution to such adjoint equation is obtained by a procedure that can be used also to derive the classical Placzek functions. This solution constitutes a benchmark for any statistical or numerical approach to the adjoint equation. A sampling technique to evaluate the adjoint flux for the transport equation is then proposed and physically interpreted as a transport model for pseudo-particles. This can be done by introducing appropriate kernels describing the transfer of the pseudo-particles in phase space. This technique allows estimating the importance function by a standard Monte Carlo approach. The sampling scheme is validated by comparison with the analytical results previously obtained.
Several total and partial photoionization cross section calculations, based on both theoretical and empirical approaches, are quantitatively evaluated with statistical analyses using a large collection of experimental data retrieved from the literature to identify the state of the art for modeling the photoelectric effect in Monte Carlo particle transport. Some of the examined cross section models are available in general purpose Monte Carlo systems, while others have been implemented and subjected to validation tests for the first time to estimate whether they could improve the accuracy of particle transport codes. The validation process identifies Scofield's 1973 non-relativistic calculations, tabulated in the Evaluated Photon Data Library(EPDL), as the one best reproducing experimental measurements of total cross sections. Specialized total cross section models, some of which derive from more recent calculations, do not provide significant improvements. Scofield's non-relativistic calculations are not surpassed regarding the compatibility with experiment of K and L shell photoionization cross sections either, although in a few test cases Ebel's parameterization produces more accurate results close to absorption edges. Modifications to Biggs and Lighthill's parameterization implemented in Geant4 significantly reduce the accuracy of total cross sections at low energies with respect to its original formulation. The scarcity of suitable experimental data hinders a similar extensive analysis for the simulation of the photoelectron angular distribution, which is limited to a qualitative appraisal.
A test of Geant4 simulation of electron backscattering recently published in this journal prompted further investigation into the causes of the observed behaviour. An interplay between features of geometry and physics algorithms implemented in Geant4 is found to significantly affect the accuracy of backscattering simulation in some physics configurations.
We present the first estimate of age, stellar metallicity and chemical abundance ratios, for an individual early-type galaxy at high-redshift (z = 1.426) in the COSMOS field. Our analysis is based on observations obtained with the X-Shooter instrument at the VLT, which cover the visual and near infrared spectrum at high (R >5000) spectral resolution. We measure the values of several spectral absorptions tracing chemical species, in particular Magnesium and Iron, besides determining the age-sensitive D4000 break. We compare the measured indices to stellar population models, finding good agreement. We find that our target is an old (t > 3 Gyr), high-metallicity ([Z/H] > 0.5) galaxy which formed its stars at z_{form} > 5 within a short time scale ~0.1 Gyr, as testified by the strong [α/Fe] ratio ( > 0.4), and has passively evolved in the first > 3-4 Gyr of its life. We have verified that this result is robust against the choice and number of fitted spectral features, and stellar population model. The result of an old age and high-metallicity has important implications for galaxy formation and evolution confirming an early and rapid formation of the most massive galaxies in the Universe.
Backscattering is a sensitive probe of the accuracy of electron scattering algorithms implemented in Monte Carlo codes. The capability of the Geant4 toolkit to describe realistically the fraction of electrons backscattered from a target volume is extensively and quantitatively evaluated in comparison with experimental data retrieved from the literature. The validation test covers the energy range between approximately 100 eV and 20 MeV, and concerns a wide set of target elements. Multiple and single electron scattering models implemented in Geant4, as well as preassembled selections of physics models distributed within Geant4, are analyzed with statistical methods. The evaluations concern Geant4 versions from 9.1 to 10.1. Significant evolutions are observed over the range of Geant4 versions, not always in the direction of better compatibility with experiment. Goodness-of-fit tests complemented by categorical analysis tests identify a configuration based on Geant4 Urban multiple scattering model in Geant4 version 9.1 and a configuration based on single Coulomb scattering in Geant4 10.0 as the physics options best reproducing experimental data above a few tens of keV. At lower energies only single scattering demonstrates some capability to reproduce data down to a few keV. Recommended preassembled physics configurations appear incapable of describing electron backscattering compatible with experiment. With the support of statistical methods, a correlation is established between the validation of Geant4-based simulation of backscattering and of energy deposition.
This extended abstract briefly summarizes ongoing research activity on the evaluation and experimental validation of physics methods for photon and electron transport. The analysis includes physics models currently implemented in Geant4 as well as modeling methods used in other Monte Carlo codes, or not yet considered in general purpose Monte Carlo simulation systems. The validation of simulation models is performed with the support of rigorous statistical methods, which involve goodness-of-fit tests followed by categorical analysis. All results are quantitative, and are fully documented.
We present a high signal to noise (S/N$>$10) medium resolution (R=2000) LBT-LUCIFER spectrum of the early-type galaxy (ETG) S2F1-142 at $z\simeq1.4$. By means of the CaT line at $8662$ Å, we measured its redshift $z=1.386\pm 0.001$ and we estimated its velocity dispersion $σ_{v}=340 ^{-60}_{+120}$ km/s. Its corresponding virial mass is 3.9$\times10^{11}$ M$_\odot$, compatible with the stellar mass estimates obtained assuming Initial Mass Functions (IMFs) less dwarf rich than the Salpeter one. S2F1-142 is a compact galaxy with $R_{e}$=3.1$\pm$0.2 kpc, i.e., an effective radius more than three times smaller than the average $R_{e}$ of early-type galaxies with the same mass in the local universe. At the same time, we found local and high redshift galaxies with a similar mass content and similar effective radius confirming that it is fully consistent with the already available measures of $R_{e}$ and $σ_{v}$ both in the local and in the distant universe. Considering the distribution of $R_{e}$ and $σ_{v}$ as a function of the stellar mass content of ETGs, both in the local and in the distant universe, we noticed that the measured velocity dispersions of the more compact galaxies are on average slightly lower than expected on the basis of their compactness and the virial theorem, suggesting that {\it i)} their dark matter content is lower than in the more diffuse galaxies and/or {\it ii)} their luminosity profiles are steeper than in the more diffuse galaxies and/or {\it iii)} their larger compactness is an apparent effect caused by the overestimate of their stellar mass content (due to bottom lighter IMF and/or systematic affecting the stellar mass estimates).
We introduce a theoretical framework for the calculation of uncertainties affecting observables produced by Monte Carlo particle transport, which derive from uncertainties in physical parameters input into simulation. The theoretical developments are complemented by a heuristic application, which illustrates the method of calculation in a streamlined simulation environment.
Several models for the Monte Carlo simulation of Compton scattering on electrons are quantitatively evaluated with respect to a large collection of experimental data retrieved from the literature. Some of these models are currently implemented in general purpose Monte Carlo systems; some have been implemented and evaluated for possible use in Monte Carlo particle transport for the first time in this study. Here we present first and preliminary results concerning total and differential Compton scattering cross sections.
In the context of Monte Carlo (MC) simulation of particle transport Uncertainty Quantification (UQ) addresses the issue of predicting non statistical errors affecting the physical results, i.e. errors deriving mainly from uncertainties in the physics data and/or in the model they embed. In the case of a single uncertainty a simple analytical relation exists among its the Probability Density Function (PDF) and the corresponding PDF for the output of the simulation: this allows a complete statistical analysis of the results of the simulation. We examine the extension of this result to the multi-variate case, when more than one of the physical input parameters are affected by uncertainties: a typical scenario is the prediction of the dependence of the simulation on input cross section tabulations.
Various issues related to the complexity of apprais- ing the capabilities of physics models implemented in Monte Carlo simulation codes and the evolution of the functional quality the associated software are considered, such as the dependence on the experimental environment where the software operates and its sensitivity to detector characteristics. The concept of software validity as relative to the environment is illustrated by means of a real-life experimental test case. Methods and techniques to mitigate the risk of deteriorating the quality of the software are critically discussed: they concern various disciplines of the software development process. Quantitative validation of physics models is advocated as a method to appraise their capabilities objectively and to monitor the evolution of their associated software behavior.
Several physics methods for the simulation of the photoelectric effect are quantitatively evaluated with respect to a large collection of experimental data retrieved from the literature. They include theoretical and empirical calculations of total and partial cross sections, and calculations of the photoelectron angular distribution. Some of these models are currently implemented in general purpose Monte Carlo systems; some have been implemented and evaluated for possible use in Monte Carlo particle transport for the first time in this study.
Geant4-based simulations of the energy deposited by electrons in various materials are quantitatively compared to high precision calorimetric measurements taken at Sandia Laboratories. The experimental data concern electron beams of energy between a few tens of keV and 1 MeV at various incidence angles. Two experimental scenarios are evaluated: the longitudinal energy deposition pattern in a finely segmented detector, and the total energy deposited in a larger size calorimeter. The simulations are produced with Geant4 versions from 9.1 to 9.6; they involve models of electron-photon interactions in the standard and low energy electromagnetic packages, and various implementations of electron multiple scattering. Significant differences in compatibility with experimental data are observed in the longitudinal energy deposition patterns produced by the examined Geant4 versions, while the total deposited energy exhibits smaller variations across the various Geant4 versions, with the exception Geant4 9.4. The validation analysis, based on statistical methods, shows that the best compatibility between simulation and experimental energy deposition profiles is achieved using electromagnetic models based on the EEDL and EPDL evaluated data libraries with Geant4 9.1. The results document the accuracy achievable in the simulation of the energy deposited by low energy electrons with Geant4; they provide guidance for application in similar experimental scenarios and for improving Geant4.
Several models for the simulation of photon elastic scattering are quantitatively evaluated with respect to a large collection of experimental data retrieved from the literature. They include models based on the form factor approximation, on S-matrix calculations and on analytical parameterizations; they exploit publicly available data libraries and tabulations of theoretical calculations. Some of these models are currently implemented in general purpose Monte Carlo systems; some have been implemented and evaluated for the first time in this paper for possible use in Monte Carlo particle transport. The analysis mainly concerns the energy range between 5 keV and a few MeV. The validation process identifies the newly implemented model based on second order S-matrix calculations as the one best reproducing experimental measurements. The validation results show that, along with Rayleigh scattering, additional processes, not yet implemented in Geant4 nor in other major Monte Carlo systems, should be taken into account to realistically describe photon elastic scattering with matter above 1 MeV. Evaluations of the computational performance of the various simulation algorithms are reported along with the analysis of their physics capabilities.
A survey of atomic binding energies used by general purpose Monte Carlo systems is reported. Various compilations of these parameters have been evaluated; their accuracy is estimated with respect to experimental data. Their effects on physics quantities relevant to Monte Carlo particle transport are highlighted: X-ray fluorescence emission, electron and proton ionization cross sections, and Doppler broadening in Compton scattering. The effects due to different binding energies are quantified with respect to experimental data. The results of the analysis provide quantitative ground for the selection of binding energies to optimize the accuracy of Monte Carlo simulation in experimental use cases. Recommendations on software design dealing with these parameters and on the improvement of data libraries for Monte Carlo simulation are discussed.
Two models for the calculation of ionization cross sections by electron impact on atoms, the Binary-Encouter-Bethe and the Deutsch-Maerk models, have been implemented; they are intended to extend and improve Geant4 simulation capabilities in the energy range below 1 keV. The physics features of the implementation of the models are described, and their differences with respect to the original formulations are discussed. Results of the verification with respect to the original theoretical sources and of extensive validation with respect to experimental data are reported. The validation process also concerns the ionization cross sections included in the Evaluated Electron Data Library used by Geant4 for low energy electron transport. Among the three cross section options, the Deutsch-Maerk model is identified as the most accurate at reproducing experimental data over the energy range subject to test.
Three software systems, ERCS08, ISICS 2011 and Šmit's code, that implement theoretical calculations of inner shell ionization cross sections by proton impact, are validated with respect to experimental data. The accuracy of the cross sections they generate is quantitatively estimated and inter-compared through statistical methods. Updates and extensions of a cross section data library relevant to PIXE simulation with Geant4 are discussed.
Recent developments and validation tests related to the simulation of X-ray fluorescence and PIXE with Geant4 are reviewed. They concern new models for PIXE, which has enabled the first Geant4-based simulation of PIXE in a concrete experimental application, and the experimental validation of the content of the EADL data library relevant to the simulation of X-ray fluorescence. Achievements and open issues in this domain are discussed.
The role of data libraries in Monte Carlo simulation is discussed. A number of data libraries currently in preparation are reviewed; their data are critically examined with respect to the state-of-the-art in the respective fields. Extensive tests with respect to experimental data have been performed for the validation of their content.
The issue of how epistemic uncertainties affect the outcome of Monte Carlo simulation is discussed by means of a concrete use case: the simulation of the longitudinal energy deposition profile of low energy protons. A variety of electromagnetic and hadronic physics models is investigated, and their effects are analyzed. Possible systematic effects are highlighted. The results identify requirements for experimental measurements capable of reducing epistemic uncertainties in the physics models.
An investigation is in progress to evaluate extensively and quantitatively the possible benefits and drawbacks of new programming paradigms in a Monte Carlo simulation environment, namely in the domain of physics modeling. The prototype design and extensive benchmarks, including a variety of rigorous quantitative metrics, are presented. The results of this research project allow the evaluation of new software techniques for their possible adoption in Monte Carlo simulation on objective, quantitative ground.
A set of physics models and parameters pertaining to the simulation of proton energy deposition in matter are evaluated in the energy range up to approximately 65 MeV, based on their implementations in the Geant4 toolkit. The analysis assesses several features of the models and the impact of their associated epistemic uncertainties, i.e. uncertainties due to lack of knowledge, on the simulation results. Possible systematic effects deriving from uncertainties of this kind are highlighted; their relevance in relation to the application environment and different experimental requirements are discussed, with emphasis on the simulation of radiotherapy set-ups. By documenting quantitatively the features of a wide set of simulation models and the related intrinsic uncertainties affecting the simulation results, this analysis provides guidance regarding the use of the concerned simulation tools in experimental applications; it also provides indications for further experimental measurements addressing the sources of such uncertainties.
The issue of how epistemic uncertainties affect the outcome of Monte Carlo simulation is discussed by means of a concrete use case: the simulation of the longitudinal energy deposition profile of low energy protons. A variety of electromagnetic and hadronic physics models is investigated, and their effects are analyzed. Possible systematic effects are highlighted. The results identify requirements for experimental measurements capable of reducing epistemic uncertainties in the simulation.
Physical parameters of galaxies (as luminosity, stellar mass, age) are often derived by means of the model templates which best fit their spectro-photometric data. We have performed a quantitative test aimed at exploring the ability of this procedure in recovering the physical parameters of early-type galaxies at 1<z<2. A wide range of simulated SEDs, reproducing those of early-type galaxies at 1<z<2 with assigned age and mass, are used to build mock photometric catalogs with wavelength coverage and photometric uncertainties similar to those of two topical surveys (i.e. VVDS and GOODS). The best fitting analysis of the simulated photometric data allows to study the differences among the recovered parameters and the input ones. Results indicate that the stellar masses measured by means of optical bands are affected by larger uncertainties with respect to those obtained from near-IR bands, and they frequently underestimate the real values. The M/L ratio in the V band results strongly underestimated, even when derived from the recently proposed recipe based on rest-frame optical colours (e.g. (B-V)).