Source author record

P. K. Muduli

P. K. Muduli appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

15works
5topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

15 published item(s)

preprint2022arXiv

Large spin-to-charge conversion at the two-dimensional interface of transition metal dichalcogenides and permalloy

Spin-to-charge conversion is an essential requirement for the implementation of spintronic devices. Recently, monolayers of semiconducting transition metal dichalcogenides (TMDs) have attracted considerable interest for spin-to-charge conversion due to their high spin-orbit coupling and lack of inversion symmetry in their crystal structure. However, reports of direct measurement of spin-to-charge conversion at TMD-based interfaces are very much limited. Here, we report on the room temperature observation of a large spin-to-charge conversion arising from the interface of Ni$_{80}$Fe$_{20}$ (Py) and four distinct large area ($\sim 5\times2$~mm$^2$) monolayer (ML) TMDs namely, MoS$_2$, MoSe$_2$, WS$_2$, and WSe$_2$. We show that both spin mixing conductance and the Rashba efficiency parameter ($λ_{IREE}$) scales with the spin-orbit coupling strength of the ML TMD layers. The $λ_{IREE}$ parameter is found to range between $-0.54$ and $-0.76$ nm for the four monolayer TMDs, demonstrating a large spin-to-charge conversion. Our findings reveal that TMD/ferromagnet interface can be used for efficient generation and detection of spin current, opening new opportunities for novel spintronic devices.

preprint2020arXiv

Direct measurement of interfacial Dzyaloshinskii-Moriya interaction at the MoS$_{\rm 2}$/Ni$_{80}$Fe$_{20}$ interface

We report on a direct measurement of sizable interfacial Dzyaloshinskii-Moriya interaction (iDMI) at the interface of two-dimensional transition metal dichalcogenide (2D-TMD), MoS$_{\rm 2}$ and Ni$_{80}$Fe$_{20}$ (Py) using Brillouin light scattering spectroscopy. A clear asymmetry in spin-wave dispersion is measured in MoS$_{\rm 2}$/Py/Ta, while no such asymmetry is detected in the reference Py/Ta system. A linear scaling of the DMI constant with the inverse of Py thickness indicates the interfacial origin of the observed DMI. We further observe an enhancement of DMI constant in three to four layer MoS$_{\rm 2}$/Py system (by 56$\%$) as compared to 2 layer MoS$_{\rm 2}$/Py which is caused by a higher density of MoO$_{\rm 3}$ defect species in the case of three to four layer MoS$_{\rm 2}$. The results open possibilities of spin-orbitronic applications utilizing the 2D-TMD based heterostructures.

preprint2016arXiv

Spin-polarized quasiparticle tunneling in spin-filter pseudospin-valve devices

Spin selective nature of spin-filter tunnel junctions can be integrated with conventional metallic ferromagnets to regulate spin polarized quasiparticles in superconducting devices. We report fabrication of pseudo spin-valve device made with a bilayer of nitride spin-filter tunnel barrier (DyN or GdN) and a transition metal ferromagnet (Co and Gd). We show resistance switching in these devices corresponding to parallel and antiparallel configuration of their mutual magnetization direction. With optimal deposition process partial nitridation of the Co layer can be achieved. The magnetically dead native CoN$_x$ layer at the Co-DyN interface acts the role of the barrier in these devices. In pseudo spin-valve with Co, lower resistance was found for antiparallel state compared to parallel configuration. Reverse resistance switching behavior was observed for the pseudo spin-valves with Gd. Presence of resistance switching in these devices further confirm the spin-filtering nature of DyN and GdN tunnel barrier. Quasiparticle transport at different temperatures in these devices was found to be compatible with conventional N-I-S tunnelling model. These devices can be further engineered to regulate spin polarized supercurrent in superconducting spintronics devices.

preprint2015arXiv

Magnetic field-enhanced spin filtering in rare-earth mononitride tunnel junctions

Spin filter tunnel junctions are based on selective tunneling of up and down spin electrons controlled through exchange splitting of the band structure of a ferromagnetic insulator. Therefore, spin filter efficiency can be tuned by adjusting exchange strength of the tunnel barrier. We have observed that magnetic field and bias voltage (current) can be used to regulate exchange strength and consequently spin-filter efficiency in tunnel junctions with ferromagnetic DyN and GdN tunnel barrier. In tunnel junctions with DyN barrier we obtained $\sim$37$\%$ spin polarization of tunneling electrons at 11 K due to a small exchange splitting ($ E_{ex}$) $\approx$5.6 meV of the barrier height ($Φ_0$) $\approx$60 meV. Huge spin-filter efficiency $\sim$97$\%$ was found for tunnel junctions with GdN barrier due to larger $E_{ex}$ $\approx$47 meV. In the presence of an applied magnetic field, barrier height can further split due to magnetic field dependent exchange splitting $ E_{ex}(H)$. The spin filter efficiency in DyN tunnel junctions can be increased up to $\sim$87$\%$ with magnetic field. Electric and magnetic field tuned spin-filter efficiency of these tunnel junctions gives opportunity for practical application of these devices with additional functionality.

preprint2013arXiv

Generation linewidth of mode-hopping spin torque oscillators

Experiments on spin torque oscillators commonly observe multi-mode signals. Recent theoretical works have ascribed the multi-mode signal generation to coupling between energy-separated spin wave modes. Here, we analyze in detail the dynamics generated by such mode coupling. We show analytically that the mode-hopping dynamics broaden the generation linewidth and makes it generally well described by a Voigt lineshape. Furthermore, we show that the mode-hopping contribution to the linewidth can dominate in which case it provides a direct measure of the mode-hopping rate. Due to the thermal drive of mode-hopping events, the mode-hopping rate also provides information on the energy barrier separating modes and temperature-dependent linewidth broadening. Our results are in good agreement with experiments, revealing the physical mechanism behind the linewidth broadening in multi-mode spin torque oscillators.

preprint2012arXiv

Decoherence and mode-hopping in a magnetic tunnel junction-based spin-torque oscillator

We discuss the coherence of magnetic oscillations in a magnetic tunnel junction-based spin-torque oscillator as a function of external field angle. Time-frequency analysis shows mode-hopping between distinct oscillator modes, which arises from linear and nonlinear couplings in the Landau-Lifshitz-Gilbert equation, analogous to mode-hopping observed in semiconductor ring lasers. These couplings and therefore mode-hopping are minimized near the current threshold for antiparallel (AP) alignment of free layer with reference layer magnetization. Away from the AP alignment, mode-hopping limits oscillator coherence.

preprint2012arXiv

Large local Hall effect in pin-hole dominated multigraphene spin-valves

We report local and non-local measurements in pin-hole dominated mesoscopic multigraphene spin-valves. Local spin-valve measurements show spurious switching behavior in resistance during magnetic field sweeping similar to the signal observed due to spin-injection into multigraphene. The switching behavior has been explained in terms of local Hall effect due to thickness irregularity of the tunnel barrier. Local Hall effect appears due to large local magnetostatic field produced at the roughness in the AlO$_x$ tunnel barrier. The effect of this local Hall effect is found to reduce as temperature is increased above 75 K. The strong local Hall effect hinders spin-injection into multigraphene resulting in no spin signal in non-local measurements.

preprint2012arXiv

Low-field microwave absorption in epitaxial La-Sr-Mn-O films resulting from the angle-tuned ferromagnetic resonance in the multidomain state

We studied magnetic-field induced microwave absorption in 100-200 nm thick La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ films on SrTiO$_{3}$ substrate and found a low-field absorption with a very peculiar angular dependence: it appears only in the oblique field and is absent both in the parallel and in the perpendicular orientations. We demonstrate that this low-field absorption results from the ferromagnetic resonance in the multidomain state (domain-mode resonance). Its unusual angular dependence arises from the interplay between the parallel component of the magnetic field that drives the film into multidomain state and the perpendicular field component that controls the domain width through its effect on domain wall energy. The low-field microwave absorption in the multidomain state can be a tool to probe domain structure in magnetic films with in-plane magnetization.

preprint2012arXiv

Temperature dependence of linewidth in nano-contact based spin torque oscillators: effect of multiple oscillatory modes

We discuss the effect of mode transitions on the current (I) and temperature (T) dependent linewidth (Δf) in nanocontact based spin torque oscillators (STOs). At constant I, Δf exhibits an anomalous temperature dependence near the mode transitions; Δf may either increase or decrease with T depending on the position w.r.t. the mode transition. We show that the behavior of Δf as a function of I can be fitted by the single mode analytical theory of STOs, even though there are two modes present near the mode transition, if the nonlinear amplification is determined directly from the experiment. Using a recently developed theory of two coupled modes, we show that the linewidth near mode transition can be described by an "effective" single-oscillator theory with an enhanced nonlinear amplification that carries additional temperature dependence, which thus qualitatively explain the experimental results.

preprint2011arXiv

Bias dependence of perpendicular spin torque and of free and fixed layer eigenmodes in MgO-based nanopillars

We have measured the bias voltage and field dependence of eigenmode frequencies in a magnetic tunnel junction with MgO barrier. We show that both free layer (FL) and reference layer (RL) modes are excited, and that a cross-over between these modes is observed by varying external field and bias voltage. The bias voltage dependence of the FL and RL modes are shown to be dramatically different. The bias dependence of the FL modes is linear in bias voltage, whereas that of the RL mode is strongly quadratic. Using modeling and micromagnetic simulations, we show that the linear bias dependence of FL frequencies is primarily due to a linear dependence of the perpendicular spin torque on bias voltage, whereas the quadratic dependence of the RL on bias voltage is dominated by the reduction of exchange bias due to Joule heating, and is not attributable to a quadratic dependence of the perpendicular spin torque on bias voltage.

preprint2011arXiv

Frequency modulation of spin torque oscillator pairs

The current controlled modulation of nano-contact based spin torque oscillator (STO) pairs is studied in both the synchronized and non-synchronized states. The synchronized state shows a well behaved modulation and demonstrates robust mutual locking even under strong modulation. The power distribution of the modulation sidebands can be quantitatively described by assuming a single oscillator model. However, in the non-synchronized state, the modulation sidebands are not well described by the model, indicating interactions between the two individual nano-contact STOs. These findings are promising for potential applications requiring the modulation of large synchronized STO arrays.

preprint2011arXiv

Spin-torque oscillator linewidth narrowing under current modulation

We study the behavior of the linewidth of a nano-contact based spin torque oscillator (STO) under application of a radio frequency (100 MHz) modulating current. We achieve a significant (up to 85%) reduction of the STO linewidth when it is modulated across a region of high nonlinearity. The mechanism responsible for the linewidth reduction is the nonlinear frequency shift under the influence of current modulation, which reduces the nonlinear amplification of the linewidth. The reduction of the linewidth during modulation can be quantitatively calculated from the free-running behavior of the STO.

preprint2010arXiv

Non-linear frequency and amplitude modulation of a nano-contact spin torque oscillator

We study the current controlled modulation of a nano-contact spin torque oscillator. Three principally different cases of frequency non-linearity ($d^{2}f/dI^{2}_{dc}$ being zero, positive, and negative) are investigated. Standard non-linear frequency modulation theory is able to accurately describe the frequency shifts during modulation. However, the power of the modulated sidebands only agrees with calculations based on a recent theory of combined non-linear frequency and amplitude modulation.

preprint2009arXiv

Magnetotransport in polycrystalline La$_{2/3}$Sr$_{1/3}$MnO$_{3}$ thin films of controlled granularity

Polycrystalline La$_{2/3}$Sr$_{1/3}$MnO$_{3}$ (LSMO) thin films were synthesized by pulsed laser ablation on single crystal (100) yttria-stabilized zirconia (YSZ) substrates to investigate the mechanism of magneto-transport in a granular manganite. Different degrees of granularity is achieved by using the deposition temperature (T$_{D}$) of 700 and 800 $^{0}$C. Although no significant change in magnetic order temperature (T$_C$) and saturation magnetization is seen for these two types of films, the temperature and magnetic field dependence of their resistivity ($ρ$(T, H)) is strikingly dissimilar. While the $ρ$(T,H) of the 800 $^{0}$C film is comparable to that of epitaxial samples, the lower growth temperature leads to a material which undergoes insulator-to-metal transition at a temperature (T$_{P}$ $\approx$ 170 K) much lower than T$_C$. At T $\ll$ T$_P$, the resistivity is characterized by a minimum followed by ln $\emph{T}$ divergence at still lower temperatures. The high negative magnetoresistance ($\approx$ 20$%$) and ln $\emph{T}$ dependence below the minimum are explained on the basis of Kondo-type scattering from blocked Mn-spins in the intergranular material. Further, a striking feature of the T$_D$ = 700 $^{0}$C film is its two orders of magnitude larger anisotropic magnetoresistance (AMR) as compared to the AMR of epitaxial films. We attribute it to unquenching of the orbital angular momentum of 3d electrons of Mn ions in the intergranular region where crystal field is poorly defined.

preprint2009arXiv

Tailoring exchange bias in half-metallic La$_{2/3}$Sr$_{1/3}$MnO$_{3}$ thin films for spin-valve applications

We have utilized the antiferromagnetic nature and structural/chemical compatibility of La$_{0.45}$Sr$_{0.55}$MnO$_{3}$ with highly spin polarized La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ to prepare epitaxial exchange bias couples. A robust exchange bias (EB) shift of magnetization hysteresis with associated interfacial exchange energy J $\approx$ 0.13 erg/cm$^2$ at 10 K along with enhanced coercivity are reported. The EB effect was engineered to bring coercivity contrast between La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ and cobalt films in La$_{0.45}$Sr$_{0.55}$MnO$_{3}$/La$_{0.67}$Sr$_{0.33}$MnO$_{3}$/SrTiO$_{3}$/Co magnetic tunnel junctions.