Researcher profile

Mark S. Lundstrom

Mark S. Lundstrom contributes to research discovery and scholarly infrastructure.

ResearcherAffiliation not importedOpen to collaborate

cond-mat.mes-hall cond-mat.mtrl-sci quant-ph

Trust snapshot

Quick read

Trust 21 - Emerging

9works

0followers

3topics

4close collaborators

Actions

Decide how to stay connected

Follow researcher0

Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.

Building this graph slice

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2015arXiv

Anisotropic in-plane thermal conductivity observed in few-layer black phosphorus

Black phosphorus has been revisited recently as a new two-dimensional material showing potential applications in electronics and optoelectronics. Here we report the anisotropic in-plane thermal conductivity of suspended few-layer black phosphorus measured by micro-Raman spectroscopy. The armchair and zigzag thermal conductivities are ~20 and ~40 W m$^{-1}$ K$^{-1}$ for black phosphorus films thicker than 15 nm, respectively, and decrease to ~10 and ~20 W m$^{-1}$ K$^{-1}$ as the film thickness is reduced, exhibiting significant anisotropy. The thermal conductivity anisotropic ratio is found to be ~2 for thick black phosphorus films and drops to ~1.5 for the thinnest 9.5-nm-thick film. Theoretical modeling reveals that the observed anisotropy is primarily related to the anisotropic phonon dispersion, whereas the intrinsic phonon scattering rates are found to be similar along the armchair and zigzag directions. Surface scattering in the black phosphorus films is shown to strongly suppress the contribution of long-mean-free-path acoustic phonons.

preprint2012arXiv

Electron-Phonon Scattering in Planar MOSFETs: NEGF and Monte Carlo Methods

A formalism for incorporating electron-phonon scattering into the nonequilibrium Green's function (NEGF) framework that is applicable to planar MOSFETs is presented. Restructuring the NEGF equations in terms of approximate summation of transverse momentum modes leads to a rigorous and efficient method of solution. This helps to drastically reduce the computational complexity, allowing treatment of both quantum mechanics and dissipative electron-phonon scattering processes for device sizes from nanometers to microns. The formalism is systematically benchmarked against Monte Carlo solutions of the classical Boltzmann transport for model potential profiles. Results show a remarkably close agreement between the two methods for variety of channel lengths and bias conditions, both for elastic and inelastic scattering processes.

preprint2010arXiv

p-i-n Tunnel FETs vs. n-i-n MOSFETs: Performance Comparison from Devices to Circuits

The band-to-band tunneling transistors have some performance advantages over the conventional MOSFETs due to the <60mV/dec sub-threshold slope. In this paper, carbon nanotubes are used as a model channel material to address issues that we believe will apply to BTBT FETs vs. MOSFETs more generally. We use pz-orbital tight-binding Hamiltonian and the non-equilibrium Green function (NEGF) formalism for rigorous treatment of dissipative quantum transport. A device level comparison of p-i-n TFETs and n-i-n MOSFETs in both ballistic and dissipative cases has been performed previously. In this paper, the possibility of using p-i-n TFETs in ultra-low power sub-threshold logic circuits is investigated using a rigorous numerical simulator. The results show that, in sub-threshold circuit operation, the p-i-n TFETs have better DC characteristics, and can deliver ~15x higher performance at the iso-P_LEAKAGE, iso-VDD conditions. Because p-i-n TFETs can operate at lower VDD than n-i-n MOSFETs, they can deliver ~3x higher performance at the same power (P_OPERATION). This results in ~3x energy reduction under iso-delay conditions. Therefore the p-i-n TFETs are more suitable for sub-threshold logic operation.

preprint2010arXiv

Simulation of the Spin Field Effect Transistors: Effects of Tunneling and Spin Relaxation on its Performance

A numerical simulation of spin-dependent quantum transport for a spin field effect transistor (spinFET) is implemented in a widely used simulator nanoMOS. This method includes the effect of both spin relaxation in the channel and the tunneling barrier between the source/drain and the channel. Account for these factors permits setting more realistic performance limits for the transistor, especially the magnetoresistance, which is found to be lower compared to earlier predictions. The interplay between tunneling and spin relaxation is elucidated by numerical simulation. Insertion of the tunneling barrier leads to an increased magnetoresistance. Numerical simulations are used to explore the tunneling barrier design issues.

preprint2009arXiv

On momentum conservation and thermionic emission cooling

The question of whether relaxing momentum conservation can increase the performance of thermionic cooling device is examined. Both homojunctions and heterojunctions are considered. It is shown that for many cases, a non-conserved lateral momentum model overestimates the current. For the case of heterojunctions with a much heavier effective mass in the barrier and with a low barrier height, however, non-conservation of lateral momentum may increase the current. These results may be simply understood from the general principle that the current is limited by the location, well or barrier, with the smallest number of conducting channels. These results also show that within thermionic emission framework, the possibilities of increasing thermionic cooling by relaxing momentum conservation are limited. More generally, however, when the connection to the source is weak or in the presence of scattering, the situation may be different. Issues that deserve further study are identified.

preprint2008arXiv

Influence of Dimensionality on Thermoelectric Device Performance

The role of dimensionality on the electronic performance of thermoelectric devices is clarified using the Landauer formalism, which shows that the thermoelectric coefficients are related to the transmission, T(E), and how the conducing channels, M(E), are distributed in energy. The Landauer formalism applies from the ballistic to diffusive limits and provides a clear way to compare performance in different dimensions. It also provides a physical interpretation of the "transport distribution," a quantity that arises in the Boltzmann transport equation approach. Quantitative comparison of thermoelectric coefficients in one, two, and three dimension shows that the channels may be utilized more effectively in lower-dimensions. To realize the advantage of lower dimensionality, however, the packing density must be very high, so the thicknesses of the quantum wells or wires must be small. The potential benefits of engineering M(E) into a delta-function are also investigated. When compared to a bulk semiconductor, we find the potential for ~50 % improvement in performance. The shape of M(E) improves as dimensionality decreases, but lower dimensionality itself does not guarantee better performance because it is controlled by both the shape and the magnitude of M(E). The benefits of engineering the shape of M(E) appear to be modest, but approaches to increase the magnitude of M(E) could pay large dividends.

preprint2008arXiv

Performance Analysis of 60nm gate length III-V InGaAs HEMTs: Simulations vs. experiments

An analysis of recent experimental data for high-performance In0.7Ga0.3As high electron mobility transistors (HEMTs) is presented. Using a fully quantum mechanical, ballistic model, we simulate In0.7Ga0.3As HEMTs with gate lengths of LG = 60nm, 85, and 135 nm and compare the result to the measured I-V characteristics including draininduced barrier lowering, sub-threshold swing, and threshold voltage variation with gate insulator thickness, as well as on-current performance. To first order, devices with three different oxide thicknesses and channel lengths can all be described by our ballistic model with appropriate values of parasitic series resistance. For high gate voltages, however, the ballistic simulations consistently overestimate the measured on-current, and they do not show the experimentally observed decrease in on-current with increasing gate length. With no parasitic series resistance at all, the simulated on-current of the LG = 60 nm device is about twice the measured current. According to the simulation, the estimated ballistic carrier injection velocity for this device is about 2.7 x 10^7 cm/s. Because of the importance of the semiconductor capacitance, the simulated gate capacitance is about 2.5 times less than the insulator capacitance. Possible causes of the transconductance degradation observed under high gate voltages in these devices are also explored. In addition to a possible gate-voltage dependent scattering mechanism, the limited ability of the source to supply carriers to the channel, and the effect of nonparabolicity are likely to play a role. The drop in on-current with increasing gate length is an indication that the devices operate below the ballistic limit.

preprint2007arXiv

Band-to-band tunneling in a carbon nanotube metal-oxide-semiconductor field-effect transistor is dominated by phonon assisted tunneling

Band-to-band tunneling (BTBT) devices have recently gained a lot of interest due to their potential for reducing power dissipation in integrated circuits. We have performed extensive simulations for the BTBT operation of carbon nanotube metal-oxide-semiconductor field-effect transistors (CNT-MOSFETs) using the non-equilibrium Green's functions formalism for both ballistic and dissipative quantum transport. In comparison with recently reported experimental data (Y. Lu et al, J. Am. Chem. Soc., v. 128, p. 3518-3519, 2006), we have obtained strong evidence that BTBT in CNT-MOSFETs is dominated by optical phonon assisted inelastic transport, which can have important implications on the transistor characteristics. It is shown that under large biasing conditions two-phonon scattering may also become important.

preprint2005arXiv

Simulation of phonon-assisted band-to-band tunneling in carbon nanotube field-effect transistors

Electronic transport in a carbon nanotube (CNT) metal-oxide-semiconductor field effect transistor (MOSFET) is simulated using the non-equilibrium Green's functions method with the account of electron-phonon scattering. For MOSFETs, ambipolar conduction is explained via phonon-assisted band-to-band (Landau-Zener) tunneling. In comparison to the ballistic case, we show that the phonon scattering shifts the onset of ambipolar conduction to more positive gate voltage (thereby increasing the off current). It is found that the subthreshold swing in ambipolar conduction can be made as steep as 40mV/decade despite the effect of phonon scattering.