Source author record

Mario Dagenais

Mario Dagenais appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

astro-ph.IM physics.optics physics.ins-det cond-mat.mes-hall

Catalog footprint

What is connected

4works

4topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2022arXiv

Development of an integrated near-IR astrophotonic spectrograph

Here, we present an astrophotonic spectrograph in the near-IR H-band (1.45 -1.65 $μm$) and a spectral resolution ($λ/δλ$) of 1500. The main dispersing element of the spectrograph is a photonic chip based on Arrayed-Waveguide-Grating technology. The 1D spectrum produced on the focal plane of the AWG contains overlapping spectral orders, each spanning a 10 nm band in wavelength. These spectral orders are cross-dispersed in the perpendicular direction using a cross-dispersion setup which consists of collimating lenses and a prism and the 2D spectrum is thus imaged onto a near-IR detector. Here, as a proof of concept, we use a few-mode photonic lantern to capture the light and feed the emanating single-mode outputs to the AWG chip for dispersion. The total size of the setup is 50$\times$30$\times$20 cm$^3$, nearly the size of a shoebox. This spectrograph will pave the way for future miniaturized integrated photonic spectrographs on large telescopes, particularly for building future photonic multi-object spectrographs.

preprint2020arXiv

Integrated Arbitrary Filter with Spiral Gratings: Design and Characterization

We report the design and characterization of a high performance integrated arbitrary filter from 1450 nm to 1640 nm. The filter's target spectrum is chosen to suppress the night-sky OH emission lines, which is critical for ground-based astronomical telescopes. This type of filter is featured by its large spectral range, high rejection ratio and narrow notch width. Traditionally it is only successfully accomplished with fiber Bragg gratings. The technique we demonstrate here is proven to be very efficient for on-chip platforms, which can bring many benefits for device footprint, performance and cost. For the design part, two inverse scattering algorithms are compared, the frequency domain discrete layer-peeling (f-DLP) and the time domain discrete layer-peeling (t-DLP). f-DLP is found to be superior for the grating reconstruction in terms of accuracy and robustness. A method is proposed to resolve the non-uniformity issue caused by the non-zero layer size in the DLP algorithm. The designed 55-notch filter is 50-mm-long and implemented on a compact Si3N4/SiO2 spiral waveguide with a total length of 63 mm. Experimentally, we demonstrate that the device has a insertion loss as low as 2.5 dB, and that the waveguide propagation loss is as low as 0.10 dB/cm. We are also able to achieve uniform notch depths and 3-dB widths of about 28 dB and 0.22 nm, respectively.

preprint2016arXiv

Development of high resolution arrayed waveguide grating spectrometers for astronomical applications: first results

Astrophotonics is the next-generation approach that provides the means to miniaturize near-infrared (NIR) spectrometers for upcoming large telescopes and make them more robust and inexpensive. The target requirements for our spectrograph are: a resolving power of about 3000, wide spectral range (J and H bands), free spectral range of about 30 nm, high on-chip throughput of about 80% (-1dB) and low crosstalk (high contrast ratio) between adjacent on-chip wavelength channels of less than 1% (-20dB). A promising photonic technology to achieve these requirements is Arrayed Waveguide Gratings (AWGs). We have developed our first generation of AWG devices using a silica-on-silicon substrate with a very thin layer of silicon-nitride in the core of our waveguides. The waveguide bending losses are minimized by optimizing the geometry of the waveguides. Our first generation of AWG devices are designed for H band and have a resolving power of around 1500 and free spectral range of about 10 nm around a central wavelength of 1600 nm. The devices have a footprint of only 12 mm x 6 mm. They are broadband (1450-1650 nm), have a peak on-chip throughput of about 80% (-1 dB) and contrast ratio of about 1.5% (-18 dB). These results confirm the robustness of our design, fabrication and simulation methods. Currently, the devices are designed for Transverse Electric (TE) polarization and all the results are for TE mode. We are developing separate J- and H-band AWGs with higher resolving power, higher throughput and lower crosstalk over a wider free spectral range to make them better suited for astronomical applications.

preprint2015arXiv

Non-Resonant Below-Bandgap Two-Photon Absorption in Quantum Dot Solar Cells

We are the first to show with clear experimental results that photons that have energy lower than the transition energy between quantum dots states and valance band can still contribute greatly to the photocurrent via both one-photon absorption process (1PA) and two-photon absorption process (2PA). The tailing states function as both the energy states for low energy photon absorption and the photocarriers extraction pathway. One of the biggest advantages of our method is that it can clearly differentiate the photocurrent due to 1PA process and 2PA process. Both 1PA and 2PA photocurrent generation efficiency in an InAs/GaAs QD device with photon excitation at 1550 nm have been quantitatively evaluated.