BZPEERReading, trust and collaboration for researchDiscover
Workspaces
Network
Opportunities
Account
Researcher profile
Marco Giordani contributes to research discovery and scholarly infrastructure.
Trust snapshot
Actions
Identity and collaboration
Claiming links this public author record to a researcher profile and unlocks direct collaboration workflows.
Log in to claimDirect collaboration
Claim this author entity first to unlock direct invitations.
Research graph
Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.
BZPEER is loading the nearby papers, people, topics and institutions for this page.
Published work
This paper overviews the 3GPP 5G NR-NTN standard, detailing the evolution from Rel. 18 to 19 and innovations for Rel. 20. Using realistic ns-3 simulations validated against 3GPP calibration data, we evaluate various satellite network configurations. The results highlight the potential of NTNs to extend wireless connectivity to remote areas, serve requests during emergency, and alleviate terrestrial network congestion.
Reliable connectivity is critical for Public Protection and Disaster Relief operations, especially in rural or compromised environments where terrestrial infrastructure is unavailable. In such scenarios, NTNs, and specifically UAVs, are promising candidates to provide on-demand and rapid connectivity on the ground, serving as aerial base stations. In this paper, we implement a setup in which a rotary-wing UAV, equipped with a Starlink Mini terminal, provides Internet connectivity to an emergency ground user in the absence of cellular coverage via LEO satellites. The UAV functions as a Wi-Fi access point, while backhauling the ground traffic through the Starlink constellation. We evaluate the system via both network simulations in ns-3 and real-world flight experiments in a rural environment, in terms of throughput, latency, coverage, and energy consumption under static and dynamic flight conditions. Our results demonstrate that the system can maintain a stable uplink throughput of approximately 30 Mbps up to approximately 200 meters, and with minimal impact on the UAV battery lifetime. These findings demonstrate the feasibility of deploying commercial LEO satellite terminals on UAVs as a practical solution for emergency connectivity.
5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower complexity, energy efficient, mid-market Internet of Things (IoT) applications is still an on-going investigation, currently led by the 3GPP which is extending the NR standard with NR-Light specifications to support devices with reduced capabilities (REDCAP). While REDCAP devices may also operate at mmWaves to improve the network performance, hardware/software simplifications are needed to support balanced and mixed requirements compared to 5G NR systems. In this context, the contributions of this paper are threefold. First, we present some NR-Light use cases for which the support of the mmWave bands is desirable. Second, we describe how 5G NR can be simplified to achieve NR-Light requirements and expectations. Finally, we evaluate via simulation the performance of NR-Light devices operating at mmWaves in an industrial IoT setup, in terms of cost and complexity, throughput, and latency.
In recent years, autonomous networks have been designed with Predictive Quality of Service (PQoS) in mind, as a means for applications operating in the industrial and/or automotive sectors to predict unanticipated Quality of Service (QoS) changes and react accordingly. In this context, Reinforcement Learning (RL) has come out as a promising approach to perform accurate predictions, and optimize the efficiency and adaptability of wireless networks. Along these lines, in this paper we propose the design of a new entity, implemented at the RAN-level that, with the support of an RL framework, implements PQoS functionalities. Specifically, we focus on the design of the reward function of the learning agent, able to convert QoS estimates into appropriate countermeasures if QoS requirements are not satisfied. We demonstrate via ns-3 simulations that our approach achieves the best trade-off in terms of QoS and Quality of Experience (QoE) performance of end users in a teleoperated-driving-like scenario, compared to other baseline solutions.
Artificial intelligence (AI) techniques have emerged as a powerful approach to make wireless networks more efficient and adaptable. In this paper we present an ns-3 simulation framework, able to implement AI algorithms for the optimization of wireless networks. Our pipeline consists of: (i) a new geometry-based mobility-dependent channel model for V2X; (ii) all the layers of a 5G-NR-compliant protocol stack, based on the ns3-mmwave module; (iii) a new application to simulate V2X data transmission, and (iv) a new intelligent entity for the control of the network via AI. Thanks to its flexible and modular design, researchers can use this tool to implement, train, and evaluate their own algorithms in a realistic and controlled environment. We test the behavior of our framework in a Predictive Quality of Service (PQoS) scenario, where AI functionalities are implemented using Reinforcement Learning (RL), and demonstrate that it promotes better network optimization compared to baseline solutions that do not implement AI.
For autonomous vehicles to operate without human intervention, information sharing from local sensors plays a fundamental role. This can be challenging to handle with bandwidth-constrained communication systems, which calls for the adoption of new wireless technologies, like in the mmwave bands, to solve capacity issues. Another approach is to exploit uav, able to provide human users and their cars with an aerial bird's-eye view of the scene otherwise unavailable, thus offering broader and more centralized observations. In this article we combine both aspects and design a novel framework in which uav, operating at mmwave, broadcast sensory information to the ground as a means to extend the (local) perception range of vehicles. To do so, we conduct a full-stack end-to-end simulation campaign with ns-3 considering real UAV data from the Stanford Drone Dataset, and study four scenarios representing different uav-to-ground communication strategies. Our results focus on the trade-off between centralized data processing in the sky vs. distributed local processing on the ground, with considerations related to the throughput, latency and reliability of the communication process.
The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the research community has been investigating Intelligent Reflective Surfaces (IRSs) and Amplify-and-Forward (AF) relays as more energy-efficient alternatives to solve coverage issues in 5G scenarios. Along these lines, this paper relies on a new simulation framework, based on ns-3, to simulate IRS/AF systems with a full-stack, end-to-end perspective, with considerations on to the impact of the channel model and the protocol stack of 5G NR networks. Our goal is to demonstrate whether these technologies can be used to relay 5G traffic requests and, if so, how to dimension IRS/AF nodes as a function of the number of end users.
The worldwide commercialization of fifth generation (5G) wireless networks and the exciting possibilities offered by connected and autonomous vehicles (CAVs) are pushing toward the deployment of heterogeneous sensors for tracking dynamic objects in the automotive environment. Among them, Light Detection and Ranging (LiDAR) sensors are witnessing a surge in popularity as their application to vehicular networks seem particularly promising. LiDARs can indeed produce a three-dimensional (3D) mapping of the surrounding environment, which can be used for object detection, recognition, and topography. These data are encoded as a point cloud which, when transmitted, may pose significant challenges to the communication systems as it can easily congest the wireless channel. Along these lines, this paper investigates how to compress point clouds in a fast and efficient way. Both 2D- and a 3D-oriented approaches are considered, and the performance of the corresponding techniques is analyzed in terms of (de)compression time, efficiency, and quality of the decompressed frame compared to the original. We demonstrate that, thanks to the matrix form in which LiDAR frames are saved, compression methods that are typically applied for 2D images give equivalent results, if not better, than those specifically designed for 3D point clouds.
Accurate scene understanding from multiple sensors mounted on cars is a key requirement for autonomous driving systems. Nowadays, this task is mainly performed through data-hungry deep learning techniques that need very large amounts of data to be trained. Due to the high cost of performing segmentation labeling, many synthetic datasets have been proposed. However, most of them miss the multi-sensor nature of the data, and do not capture the significant changes introduced by the variation of daytime and weather conditions. To fill these gaps, we introduce SELMA, a novel synthetic dataset for semantic segmentation that contains more than 30K unique waypoints acquired from 24 different sensors including RGB, depth, semantic cameras and LiDARs, in 27 different atmospheric and daytime conditions, for a total of more than 20M samples. SELMA is based on CARLA, an open-source simulator for generating synthetic data in autonomous driving scenarios, that we modified to increase the variability and the diversity in the scenes and class sets, and to align it with other benchmark datasets. As shown by the experimental evaluation, SELMA allows the efficient training of standard and multi-modal deep learning architectures, and achieves remarkable results on real-world data. SELMA is free and publicly available, thus supporting open science and research.
In a fully autonomous driving framework, where vehicles operate without human intervention, information sharing plays a fundamental role. In this context, new network solutions have to be designed to handle the large volumes of data generated by the rich sensor suite of the cars in a reliable and efficient way. Among all the possible sensors, Light Detection and Ranging (LiDAR) can produce an accurate 3D point cloud representation of the surrounding environment, which in turn generates high data rates. For this reason, efficient point cloud compression is paramount to alleviate the burden of data transmission over bandwidth-constrained channels and to facilitate real-time communications. In this paper, we propose a pipeline to efficiently compress LiDAR observations in an automotive scenario. First, we leverage the capabilities of RangeNet++, a Deep Neural Network (DNN) used to semantically infer point labels, to reduce the channel load by selecting the most valuable environmental data to be disseminated. Second, we compress the selected points using Draco, a 3D compression algorithm which is able to obtain compression up to the quantization error. Our experiments, validated on the Semantic KITTI dataset, demonstrate that it is possible to compress and send the information at the frame rate of the LiDAR, thus achieving real-time performance.
In many places all over the world rural and remote areas lack proper connectivity that has led to increasing digital divide. These areas might have low population density, low incomes, etc., making them less attractive places to invest and operate connectivity networks. 6G could be the first mobile radio generation truly aiming to close the digital divide. However, in order to do so, special requirements and challenges have to be considered since the beginning of the design process. The aim of this white paper is to discuss requirements and challenges and point out related, identified research topics that have to be solved in 6G. This white paper first provides a generic discussion, shows some facts and discusses targets set in international bodies related to rural and remote connectivity and digital divide. Then the paper digs into technical details, i.e., into a solutions space. Each technical section ends with a discussion and then highlights identified 6G challenges and research ideas as a list.
The millimeter wave (mmWave) band will provide multi-gigabits-per-second connectivity in the radio access of future wireless systems. The high propagation loss in this portion of the spectrum calls for the deployment of large antenna arrays to compensate for the loss through high directional gain, thus introducing a spatial dimension in the channel model to accurately represent the performance of a mmWave network. In this perspective, ray-tracing can characterize the channel in terms of Multi Path Components (MPCs) to provide a highly accurate model, at the price of extreme computational complexity (e.g., for processing detailed environment information about the propagation), which limits the scalability of the simulations. In this paper, we present possible simplifications to improve the trade-off between accuracy and complexity in ray-tracing simulations at mmWaves by reducing the total number of MPCs. The effect of such simplifications is evaluated from a full-stack perspective through end-to-end simulations, testing different configuration parameters, propagation scenarios, and higher-layer protocol implementations. We then provide guidelines on the optimal degree of simplification, for which it is possible to reduce the complexity of simulations with a minimal reduction in accuracy for different deployment scenarios.
Recent developments in robotics and communication technologies are paving the way towards the use of Unmanned Aerial Vehicles (UAVs) to provide ubiquitous connectivity in public safety scenarios or in remote areas. The millimeter wave (mmWave) spectrum, in particular, has gained momentum since the huge amount of free spectrum available at such frequencies can yield very high data rates. In the UAV context, however, mmWave operations may incur severe signal attenuation and sensitivity to blockage, especially considering the very long transmission distances involved. In this paper, we present a tractable stochastic analysis to characterize the coverage probability of UAV stations operating at mmWaves. We exemplify some of the trade-offs to be considered when designing solutions for millimeter wave (mmWave) scenarios, such as the beamforming configuration, and the UAV altitude and deployment.
Vehicle-to-vehicle (V2V) communications have opened the way towards cooperative automated driving as a means to guarantee improved road safety and traffic efficiency. The use of the millimeter wave (mmWave) spectrum for V2V, in particular, holds great promise since the large bandwidth available offers the possibility of realizing high-data-rate connections. However, this potential is hindered by the significant path and penetration loss experienced at these frequencies. It then becomes fundamental to practically evaluate the feasibility of installing mmWave-based technologies in the vehicular scenario, in view of the strict latency and throughput requirements of future automotive applications. To do so, in this paper we present MilliCar, the first ns-3 module for V2V mmWave networks, which features a detailed implementation of the sidelink Physical (PHY) and Medium Access Control (MAC) layers based on the latest NR V2X specifications, the 3GPP standard for next-generation vehicular systems. Our module is open-source and enables researchers to compare possible design options and their relative performance through an end-to-end full-stack approach, thereby stimulating further research on this topic.
3GPP NR V2X represents the new 3GPP standard for next-generation vehicular systems which, among other innovations, supports vehicle-to-vehicle (V2V) operations in the millimeter wave (mmWave) spectrum to address the communication requirements of future intelligent automotive networks. While mmWaves will enable massive data rates and low latency, the propagation characteristics at very high frequencies become very challenging, thereby calling for accurate performance evaluations as a means to properly assess the performance of such systems. Along these lines, in this paper MilliCar, the new ns-3 module based on the latest NR V2X specifications, is used to provide an end-to-end performance evaluation of mmWave V2V networks. We investigate the impact of different propagation scenarios and system parameters, including the inter-vehicle distance, the adopted frame numerology, and the modulation and coding scheme, and provide guidelines towards the most promising V2V deployment configurations.
Millimeter-wave (mmWave) communication is one of the cornerstone innovations of fifth-generation (5G) wireless networks, thanks to the massive bandwidth available in these frequency bands. To correctly assess the performance of such systems, however, it is essential to have reliable channel models, based on a deep understanding of the propagation characteristics of the mmWave signal. In this respect, ray tracers can provide high accuracy, at the expense of a significant computational complexity, which limits the scalability of simulations. To address this issue, in this paper we present possible simplifications that can reduce the complexity of ray tracing in the mmWave environment, without significantly affecting the accuracy of the model. We evaluate the effect of such simplifications on link-level metrics, testing different configuration parameters and propagation scenarios.
Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) offer significant advances beyond LTE, but may be unable to meet the full connectivity demands of the future digital society. Therefore, this article discusses technologies that will evolve wireless networks towards a sixth generation (6G), and that we consider as enablers for several potential 6G use cases. We provide a full-stack, system-level perspective on 6G scenarios and requirements, and select 6G technologies that can satisfy them either by improving the 5G design, or by introducing completely new communication paradigms.
IEEE 802.11bd and 3GPP NR V2X represent the new specifications for next generation vehicular networks, exploiting new communication technologies and new spectrum, such as the millimeter wave (mmWave) band, to improve throughput and reduce latency. In this paper, we specifically focus on the challenges that mmWaves introduce for Vehicle-to-Vehicle (V2V) networking, by reviewing the latest standard developments and the issues that 802.11bd and NR V2X will have to address for V2V operations at mmWaves. To the best of our knowledge, our work is the first that considers a full-stack, end-to-end approach for the design of mmWave V2V networks, discussing open issues that span from the physical to the higher layers, and reporting the results of an end-to-end performance evaluation that highlight the potential of mmWaves for V2V communications.
Communication at millimeter wave (mmWave) frequencies is one of the main novelties introduced in the 5th generation (5G) of cellular networks. The opportunities and challenges associated with such high frequencies have stimulated a number of studies that rely on simulation for the evaluation of the proposed solutions. The accuracy of simulations largely depends on that of the channel model, but popular channel models for mmWaves, such as the Spatial Channel Models (SCMs), have high computational complexity and limit the scalability of the scenarios. This paper profiles the implementation of a widely-used SCM model for mmWave frequencies, and proposes a simplified version of the 3GPP SCM that reduces the computation time by up to 12.5 times while providing essentially the same distributions of several metrics, such as the Signal-to-Interference-plus-Noise Ratio (SINR) in large scale scenarios. We also give insights on the use cases in which using a simplified model can still yield valid results.
The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular systems. However, links in mmWave networks are susceptible to blockage and may suffer from rapid variations in quality. Connectivity to multiple cells - at mmWave and/or traditional frequencies - is considered essential for robust communication. One of the challenges in supporting multi-connectivity in mmWaves is the requirement for the network to track the direction of each link in addition to its power and timing. To address this challenge, we implement a novel uplink measurement system that, with the joint help of a local coordinator operating in the legacy band, guarantees continuous monitoring of the channel propagation conditions and allows for the design of efficient control plane applications, including handover, beam tracking and initial access. We show that an uplink-based multi-connectivity approach enables less consuming, better performing, faster and more stable cell selection and scheduling decisions with respect to a traditional downlink-based standalone scheme. Moreover, we argue that the presented framework guarantees (i) efficient tracking of the user in the presence of the channel dynamics expected at mmWaves, and (ii) fast reaction to situations in which the primary propagation path is blocked or not available.