Source author record

Jianyi Jiang

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

cond-mat.supr-con hep-ex physics.ins-det

Catalog footprint

Research overview

4works

3topics

4close collaborators

Actions

Is this your work?

Open graph Browse papers

preprint2021arXiv

Critical Current Distributions of Recent Bi-2212 Round Wires

Bi-2212 is the only high-field, high-temperature superconductor (HTS) capable of reaching a critical current density $J_{\text{c}}$ (16 T, 4.2 K) of 6500 $\mathrm{A\cdot mm^{-2}}$ in the highly desirable round wire (RW) form. However, state-of-the-art Bi-2212 conductors still have a critical current density ( $J_{\text{c}}$ ) to depairing current density ( $J_{\text{d}}$ ) ratio around 20 to 30 times lower than that of state-of-the-art $\mathrm{Nb-Ti}$ or REBCO. Previously, we have shown that recent improvements in Bi-2212 RW $J_{\text{c}}$ are due to improved connectivity associated with optimization of the heat treatment process, and most recently due to a transition to a finer and more uniform powder manufactured by Engi-Mat. One quantitative measure of connectivity may be the critical current ( $I_{\text{c}}$ ) distribution, since the local $I_{\text{c}}$ in a wire can vary along the length due to variable vortex-microstructure interactions and to factors such as filament shape variations, grain-to-grain connectivity variations and blocking secondary phase distributions. Here we compare $\sim$ 0.1 m length $I_{\text{c}}$ distributions of Bi-2212 RWs with recent state-of-the-art very high- $J_{\text{c}}$ Engi-Mat powder and lower $J_{\text{c}}$ and older Nexans granulate powder. We do find that the $I_{\text{c}}$ spread for Bi-2212 wires is about twice the relative standard of high- $J_{\text{c}}$ $\mathrm{Nb-Ti}$ well below $H_{\text{irr}}$ . We do not yet see any obvious contribution of the Bi-2212 anisotropy to the $I_{\text{c}}$ distribution and are rather encouraged that these Bi-2212 round wires show relative $I_{\text{c}}$ distributions not too far from high- $J_{\text{c}}$ $\mathrm{Nb-Ti}$ wires.

preprint2013arXiv

Performance of Titanium-Oxide/Polymer Insulation in Bi-2212/Ag-alloy Round Wire Wound Superconducting Coils

Conductor insulation is one of the key components needed to make Ag-alloy clad Bi2Sr2CaCu2O8+x (Bi-2212/Ag) superconducting round wire (RW) successful for high field magnet applications as dielectric standoff and high winding current densities (Jw) directly depend on it. In this study, a TiO2/polymer insulation coating developed by nGimat LLC was applied to test samples and a high field test coil. The insulation was investigated by differential thermal analysis (DTA), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), dielectric properties measurement, and transport critical current (Ic) properties measurement. About 29% of the insulation by weight is polymer. When the Bi-2212/Ag wire is full heat treated, this decomposes with slow heating to 400°C in pure O2. After the full reaction, we found that the TiO2 did not degrade the critical current properties, adhered well to the conductor, and provided a breakdown voltage of >100 V, which allowed the test coil to survive quenching in 31.2 T background field, while providing a 2.6 T field increment. For Bi-2212/Ag RW with a typical diameter of 1.0-1.5 mm, this ~15 um thick insulation allows a very high coil packing factor of ~0.74, whereas earlier alumino-silicate braid insulation only allows packing factors of 0.38-0.48.

preprint2013arXiv

Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging

Bi-2212 round wire is made by the powder-in-tube technique. An unavoidable property of powder-in-tube conductors is that there is about 30% void space in the as-drawn wire. We have recently shown that the gas present in the as-drawn Bi-2212 wire agglomerates into large bubbles and that they are presently the most deleterious current limiting mechanism. By densifying short 2212 wires before reaction through cold isostatic pressing (CIPping), the void space was almost removed and the gas bubble density was reduced significantly, resulting in a doubled engineering critical current density (JE) of 810 A/mm2 at 5 T, 4.2 K. Here we report on densifying Bi-2212 wire by swaging, which increased JE (4.2 K, 5 T) from 486 A/mm2 for as-drawn wire to 808 A/mm2 for swaged wire. This result further confirms that enhancing the filament packing density is of great importance for making major JE improvement in this round-wire magnet conductor.

preprint2013arXiv

Transmittance and reflectance measurements at terahertz frequencies on a superconducting BaFe_{1.84}Co_{0.16}As_2 ultrathin film: an analysis of the optical gaps in the Co-doped BaFe_2As_2 pnictide

Here we report an optical investigation in the terahertz region of a 40 nm ultrathin BaFe $_{1.84}$ Co $_{0.16}$ As $_2$ superconducting film with superconducting transition temperature T $_c$ = 17.5 K. A detailed analysis of the combined reflectance and transmittance measurements showed that the optical properties of the superconducting system can be described in terms of a two-band, two-gap model. The zero temperature value of the large gap $Δ_B$ , which seems to follow a BCS-like behavior, results to be $Δ_B$ (0) = 17 cm $^{-1}$ . For the small gap, for which $Δ_A$ (0) = 8 cm $^{-1}$ , the temperature dependence cannot be clearly established. These gap values and those reported in the literature for the BaFe $_{2-x}$ Co $_{x}$ As $_2$ system by using infrared spectroscopy, when put together as a function of T $_c$ , show a tendency to cluster along two main curves, providing a unified perspective of the measured optical gaps. Below a temperature around 20 K, the gap-sizes as a function of T $_c$ seem to have a BCS-like linear behavior, but with different slopes. Above this temperature, both gaps show different supra-linear behaviors.

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Jianyi Jiang

Research overview

Is this your work?

4 publications

Critical Current Distributions of Recent Bi-2212 Round Wires

Performance of Titanium-Oxide/Polymer Insulation in Bi-2212/Ag-alloy Round Wire Wound Superconducting Coils

Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging

Transmittance and reflectance measurements at terahertz frequencies on a superconducting BaFe_{1.84}Co_{0.16}As_2 ultrathin film: an analysis of the optical gaps in the Co-doped BaFe_2As_2 pnictide

See the researcher in context

Building this map preview