Source author record

Eric E. Hellstrom

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

Catalog footprint

Research overview

3works
1topics
4close collaborators

Published work

3 publications

preprint2021arXiv

Critical Current Distributions of Recent Bi-2212 Round Wires

Bi-2212 is the only high-field, high-temperature superconductor (HTS) capable of reaching a critical current density JcJ_{\text{c}}(16 T, 4.2 K) of 6500 A⋅mm−2\mathrm{A\cdot mm^{-2}} in the highly desirable round wire (RW) form. However, state-of-the-art Bi-2212 conductors still have a critical current density (JcJ_{\text{c}}) to depairing current density (JdJ_{\text{d}}) ratio around 20 to 30 times lower than that of state-of-the-art Nb−Ti\mathrm{Nb-Ti} or REBCO. Previously, we have shown that recent improvements in Bi-2212 RW JcJ_{\text{c}} are due to improved connectivity associated with optimization of the heat treatment process, and most recently due to a transition to a finer and more uniform powder manufactured by Engi-Mat. One quantitative measure of connectivity may be the critical current (IcI_{\text{c}}) distribution, since the local IcI_{\text{c}} in a wire can vary along the length due to variable vortex-microstructure interactions and to factors such as filament shape variations, grain-to-grain connectivity variations and blocking secondary phase distributions. Here we compare ∼\sim 0.1 m length IcI_{\text{c}} distributions of Bi-2212 RWs with recent state-of-the-art very high-JcJ_{\text{c}} Engi-Mat powder and lower JcJ_{\text{c}} and older Nexans granulate powder. We do find that the IcI_{\text{c}} spread for Bi-2212 wires is about twice the relative standard of high-JcJ_{\text{c}} Nb−Ti\mathrm{Nb-Ti} well below HirrH_{\text{irr}}. We do not yet see any obvious contribution of the Bi-2212 anisotropy to the IcI_{\text{c}} distribution and are rather encouraged that these Bi-2212 round wires show relative IcI_{\text{c}} distributions not too far from high-JcJ_{\text{c}} Nb−Ti\mathrm{Nb-Ti} wires.

preprint2013arXiv

Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging

Bi-2212 round wire is made by the powder-in-tube technique. An unavoidable property of powder-in-tube conductors is that there is about 30% void space in the as-drawn wire. We have recently shown that the gas present in the as-drawn Bi-2212 wire agglomerates into large bubbles and that they are presently the most deleterious current limiting mechanism. By densifying short 2212 wires before reaction through cold isostatic pressing (CIPping), the void space was almost removed and the gas bubble density was reduced significantly, resulting in a doubled engineering critical current density (JE) of 810 A/mm2 at 5 T, 4.2 K. Here we report on densifying Bi-2212 wire by swaging, which increased JE (4.2 K, 5 T) from 486 A/mm2 for as-drawn wire to 808 A/mm2 for swaged wire. This result further confirms that enhancing the filament packing density is of great importance for making major JE improvement in this round-wire magnet conductor.

preprint2013arXiv

Transmittance and reflectance measurements at terahertz frequencies on a superconducting BaFe_{1.84}Co_{0.16}As_2 ultrathin film: an analysis of the optical gaps in the Co-doped BaFe_2As_2 pnictide

Here we report an optical investigation in the terahertz region of a 40 nm ultrathin BaFe1.84_{1.84}Co0.16_{0.16}As2_2 superconducting film with superconducting transition temperature Tc_c = 17.5 K. A detailed analysis of the combined reflectance and transmittance measurements showed that the optical properties of the superconducting system can be described in terms of a two-band, two-gap model. The zero temperature value of the large gap ΔBΔ_B, which seems to follow a BCS-like behavior, results to be ΔBΔ_B(0) = 17 cm−1^{-1}. For the small gap, for which ΔAΔ_A(0) = 8 cm−1^{-1}, the temperature dependence cannot be clearly established. These gap values and those reported in the literature for the BaFe2−x_{2-x}Cox_{x}As2_2 system by using infrared spectroscopy, when put together as a function of Tc_c, show a tendency to cluster along two main curves, providing a unified perspective of the measured optical gaps. Below a temperature around 20 K, the gap-sizes as a function of Tc_c seem to have a BCS-like linear behavior, but with different slopes. Above this temperature, both gaps show different supra-linear behaviors.

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.