Source author record

James C. M. Hwang

James C. M. Hwang appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

cond-mat.mes-hall cond-mat.mtrl-sci

Catalog footprint

What is connected

3works

2topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2016arXiv

Continuous-wave and Transient Characteristics of Phosphorene Microwave Transistors

Few-layer phosphorene MOSFETs with 0.3-um-long gate and 15-nm-thick Al2O3 gate insulator was found to exhibit a forward-current cutoff frequency of 2 GHz and a maximum oscillation frequency of 8 GHz after de-embedding for the parasitic capacitance associated mainly with the relatively large probe pads. The gate lag and drain lag of the transistor was found to be on the order of 1 us or less, which is consistent with the lack of hysteresis, carrier freeze-out or persistent photoconductivity in DC characteristics. These results confirm that the phosphorene MOSFET can be a viable microwave transistor for both small-signal and large-signal applications.

preprint2015arXiv

Phosphorene FETs: Promising transistors based on a few layers of phosphorus atoms

This paper reviews the emergence and progress of phosphorene FETs, all within about a year. In such a short time, back-gated FETs evolved into top-gated FETs, gate length was reduced to the sub-micron range, passivation by high-k dielectrics or hexagonal boron nitride was demonstrated with temporal, thermal and mechanical stability, ohmic contact was achieved down to cryogenic temperatures, and cutoff frequencies was pushed above 10 GHz. These and other attractive characteristics of phosphorene promise the phosphorene FET to be a viable candidate for current-generation flexible electronics as well as future-generation ultra-thin-body low-power-consumption high-speed and high-frequency transistors.

preprint2014arXiv

Temporal and Thermal Stability of Al2O3-passivated Phosphorene MOSFETs

This letter evaluates temporal and thermal stability of a state-of-the-art few-layer phosphorene MOSFET with Al2O3 surface passivation and Ti/Au top gate. As fabricated, the phosphorene MOSFET was stable in atmosphere for at least 100 h. With annealing at 200°C in dry nitrogen for 1 h, its drain current increased by an order of magnitude to approximately 100 mA/mm, which could be attributed to the reduction of trapped charge in Al2O3 and/or Schottky barrier at the source and drain contacts. Thereafter, the drain current was stable between -50°C and 150°C up to at least 1000 h. These promising results suggest that environmental protection of phosphorene should not be a major concern, and passivation of phosphorene should focus on its effect on electronic control and transport as in conventional silicon MOSFETs. With cutoff frequencies approaching the gigahertz range, the present phosphorene MOSFET, although far from being optimized, can meet the frequency and stability requirements of most flexible electronics for which phosphorene is intrinsically advantageous due to its corrugated lattice structure.