Source author record

David Gunnarsson

David Gunnarsson appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

cond-mat.mes-hall cond-mat.supr-con cond-mat.mtrl-sci physics.app-ph physics.ins-det quant-ph

Catalog footprint

What is connected

6works

6topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2021arXiv

Characterizing cryogenic amplifiers with a matched temperature-variable noise source

We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that includes a traveling wave parametric amplifier and a commercial high electron mobility transistor amplifier. We observe system noise temperatures as low as $680^{+20}_{-200}$ mK at 5.7 GHz corresponding to $1.5^{+0.1}_{-0.7}$ excess photons. The system we present has immediate applications in the validation of solid-state qubit readout lines.

preprint2018arXiv

Efficient thermionic operation and phonon isolation by a semiconductor-superconductor junction

Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers and thermal detectors for electromagnetic radiation, especially, rely on the maximization of electro-thermal response and blockade of phonon transport. In this work, we propose and demonstrate that efficient electro-thermal operation and phonon transfer blocking can be achieved in a single solid-state thermionic junction. Our experimental demonstration relies on suspended semiconductor-superconductor junctions where the electro-thermal response arises from the superconducting energy gap, and the phonon blocking naturally results from the transmission bottleneck at the junction. We suspend different size degenerately doped silicon chips (up to macroscopic scale) directly from the junctions and cool these by biasing the junctions. The electronic cooling operation characteristics are accompanied by measurement and analysis of the thermal resistance components in the structures indicating the operation principle of phonon blocking in the junctions.

preprint2016arXiv

Traceable Coulomb Blockade Thermometry

We present a measurement and analysis scheme for determining traceable thermodynamic temperature at cryogenic temperatures using Coulomb blockade thermometry. The uncertainty of the electrical measurement is improved by utilizing two sampling digital voltmeters instead of the traditional lock-in technique. The remaining uncertainty is dominated by that of the numerical analysis of the measurement data. Two analysis methods are demonstrated: numerical fitting of the full conductance curve and measuring the height of the conductance dip. The complete uncertainty analysis shows that using either analysis method the relative combined standard uncertainty (k = 1) in determining the thermodynamic temperature in the temperature range from 20 mK to 200 mK is below 0.5 %. In this temperature range, both analysis methods produced temperature estimates that deviated from 0.39 % to 0.67 % from the reference temperatures provided by a superconducting reference point device calibrated against the Provisional Low Temperature Scale of 2000.

preprint2013arXiv

Dielectric losses in multi-layer Josephson junction qubits

We have measured the excited state lifetimes in Josephson junction phase and transmon qubits, all of which were fabricated with the same scalable multi-layer process. We have compared the lifetimes of phase qubits before and after removal of the isolating dielectric, SiNx, and find a four-fold improvement of the relaxation time after the removal. Together with the results from the transmon qubit and measurements on coplanar waveguide resonators, these measurements indicate that the lifetimes are limited by losses from the dielectric constituents of the qubits. We have extracted the individual loss contributions from the dielectrics in the tunnel junction barrier, AlOx, the isolating dielectric, SiNx, and the substrate, Si/SiO2, by weighing the total loss with the parts of electric field over the different dielectric materials. Our results agree well and complement the findings from other studies, demonstrating that superconducting qubits can be used as a reliable tool for high-frequency characterization of dielectric materials. We conclude with a discussion of how changes in design and material choice could improve qubit lifetimes up to a factor of four.

preprint2009arXiv

Current-Phase Relation and Josephson Inductance of Superconducting Cooper Pair Transistor

We have investigated the Josephson inductance $L_J$ of a Superconducting Cooper Pair Transistor (SCPT). We traced the inductance using microwave reflection measurements on a tuned resonance circuit in which a SCPT was mounted in parallel to a $ \sim 200$ pH strip line inductance. When the inverse of the Josephson inductance, determined on the charge-phase bias plane for a SCPT with a Josephson to Coulomb energy ratio of $E_J/E_C =1.75$, is integrated over the phase, we obtain a current-phase relation, which is strongly non-sinusoidal near the charge degeneracy point.

preprint2008arXiv

Vibronic spectroscopy of an artificial molecule

With advanced fabrication techniques it is possible to make nanoscale electronic structures that have discrete energy levels. Such structures are called artificial atoms because of analogy with true atoms. Examples of such atoms are quantum dots in semiconductor heterostructures and Josephson-junction qubits. It is also possible to have artificial atoms interacting with each other. This is an artificial molecule in the sense that the electronic states are analogous to the ones in a molecule. In this letter we present a different type of artificial molecule that, in addition to electronic states, also includes the analog of nuclear vibrations in a diatomic molecule. Some of the earlier experiments could be interpreted using this analogy, including qubits coupled to oscillators and qubits driven by an intense field. In our case the electronic states of the molecule are represented by a Josephson-junction qubit, and the nuclear separation corresponds to the magnetic flux in a loop containing the qubit and an LC oscillator. We probe the vibronic transitions, where both the electronic and vibrational states change simultaneously, and find that they are analogous to true molecules. The vibronic transitions could be used for sideband cooling of the oscillator, and we see damping up to sidebands of order 10.