Source author record

Chris Dames

Chris Dames appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

physics.app-ph cond-mat.mes-hall physics.optics

Catalog footprint

What is connected

2works

3topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2022arXiv

Extreme fast charging of batteries using thermal switching and self-heating

The long charge time of electric vehicles compared with the refueling time of gasoline vehicles, has been a major barrier to the mass adoption of EVs. Currently, the charge time to 80% state of charge in electric vehicles such as Tesla with fast charging capabilities is >30 minutes. For a comparable recharging experience as gasoline vehicles, governments and automobile companies have set <15 min with 500 cycles as the goal for extreme fast charging (XFC) of electric vehicles. One of the biggest challenges to enable XFC for lithium-ion batteries (LIBs) is to avoid lithium plating. Although significant research is taking place to enable XFC, no promising technology/strategy has still emerged for mainstream commercial LIBs. Here, we propose a thermally modulated charging protocol (TMCP) by active thermal switching for XFC, i.e., retaining the battery heat during XFC with the switch OFF for boosting the kinetics to avoid lithium plating while dissipating the heat after XFC with the switch ON for reducing side reactions. Our proposed TMCP strategy enables XFC of commercial high-energy-density LIBs with charge time <15 min and >500 cycles while simultaneously beating other targets set by US Department of energy (discharge energy density > 180 Wh/kg and capacity loss < 4.5%). Further, we develop a thermal switch based on shape memory alloy and demonstrate the feasibility of integrating our TMCP in commercial battery thermal management system.

preprint2020arXiv

Anisotropic thermal conductivity tensor measurements using beam-offset frequency domain thermoreflectance (BO-FDTR) for materials lacking in-plane symmetry

Many materials have anisotropic thermal conductivity, with diverse applications such as transistors, thermoelectrics, and laser gain media. Yet measuring the thermal conductivity tensor of such materials remains a challenge, particularly for materials lacking in-plane symmetry (i.e., transversely anisotropic materials). This paper demonstrates thermal conductivity tensor measurements for transversely anisotropic materials, by extending beam-offset frequency-domain thermoreflectance (BO-FDTR) methods which had previously been limited to transversely isotropic materials. Extensive sensitivity analysis is used to determine an appropriate range of heating frequencies and beam offsets to extract various tensor elements. The new technique is demonstrated on a model transversely anisotropic material, x-cut quartz (<110> α-SiO2), by combining beam offset measurements from different sample orientations to reconstruct the full in-plane thermal conductivity tensor. The technique is also validated by measurements on two transversely isotropic materials, sapphire and highly oriented pyrolytic graphite (HOPG). The anisotropic measurements demonstrated very good self-consistency in correctly identifying isotropic directions when present, with residual anisotropy errors below 4% for sapphire and 2% for HOPG and quartz. Finally, a computational case study (simulated experiment) shows how the arbitrary in-plane thermal conductivity tensor of a fictitious material with high in-plane anisotropy can in principle be obtained from only a single sample orientation, rather than multiple orientations like the experiments on x-cut quartz.