Performance of adiabatic melting as a method to pursue the lowest possible temperature in He and He-He mixture at the He crystallization pressure
We studied a novel cooling method, in which He and He are mixed at the He crystallization pressure at temperatures below . We describe the experimental setup in detail, and present an analysis of its performance under varying isotope contents, temperatures, and operational modes. Further, we developed a computational model of the system, which was required to determine the lowest temperatures obtained, since our mechanical oscillator thermometers already became insensitive at the low end of the temperature range, extending down to ( of pure He). We did not observe any indication of superfluidity of the He component in the isotope mixture. The performance of the setup was limited by the background heat leak of the order of at low melting rates, and by the heat leak caused by the flow of He in the superleak line at high melting rates up to . The optimal mixing rate between He and He, with the heat leak taken into account, was found to be about . We suggest improvements to the experimental design to reduce the ultimate achievable temperature further.