Paper detail

Time and Energy Measurement Electronics for Silicon Drift Detector Aimed for X-ray Pulsar Navigation

A readout electronic with high time and energy resolution performance is designed for the SDD (Silicon Drift Detector) signals readout, which is aimed for X-ray pulsar based navigation (XNAV). For time measurement, the input signal is fed into a fast shaping and Constant Fraction Discrimination (CFD) circuit, and then be digitalized by a Time-to-Digital Converter (TDC) implemented in an Field Programmable Gate Array (FPGA), which is designed with a bin size of 2.5 ns. For energy measurement, a slow shaping and analog peak detection circuit is employed to acquire the energy information of input signals, which is then digitalized by a 14-bit Analog-to-Digital Converter (ADC). Both the time and energy measurement results are buffered and packaged in FPGA and then transmitted to Data Processing (DP) system. Test results indicate that the time resolution is about 3 ns, while the FWHM (Full Width at Half Maximum) of energy spectrum is better than 160 eV @ 5.9 keV, with the energy dynamic range from 1 keV to 10 keV. Meanwhile, the linearity test shows that the residual is less than 1.5% with different coming photons.