Paper detail

Rheology of surface granular flows

The rheology of surface granular flows is investigated by means of measurements of velocity and number density profiles in a quasi-two-dimensional rotating cylinder, half-filled with mono-disperse steel balls. The measurements are made at the center of the cylinder, where the flow is fully-developed, using streakline photography and image analysis . The stress profile is computed from the number density profile using a force balance taking into account wall friction. The profiles for the mean velocity superimpose when distance is scaled by the particle diameter and the velocity by a characteristic shear rate and the particle diameter. The mean velocity is found to decay exponentially with depth in the bed with a decay length of $λ=1.1d$. The r.m.s. velocity is nearly constant near the free surface and below a transition point it decays linearly with depth. The shear rate, obtained by numerical differentiation of the velocity profile, shows a maximum which occurs at the same depth as the transition in the r.m.s. velocity profile. The velocity distribution is Maxwellian above the transition point and a Poisson velocity distribution is obtained deep in the layer. The variation of the apparent viscosity ($η$) with r.m.s. velocity ($u$) shows a relatively sharp transition at the shear rate maximum, and in the region below this point the apparent viscosity varies as $η\sim u^{-1.5}$. The experimental data is compared to predictions of three models for granular flow.