Source author record

Zi-Wei Lin

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

nucl-th nucl-ex hep-ph astro-ph.HE

Catalog footprint

Research overview

21works

4topics

4close collaborators

Actions

Is this your work?

Open graph Browse papers

preprint2022arXiv

A Semi-analytical Method of Calculating Nuclear Collision Trajectory in the QCD Phase Diagram

The finite nuclear thickness affects the energy density $ε(t)$ and conserved-charge densities such as the net-baryon density $n_B(t)$ produced in heavy ion collisions. While the effect is small at high collision energies where the Bjorken energy density formula for the initial state is valid, the effect is large at low collision energies, where the nuclear crossing time is not small compared to the parton formation time. The temperature $T(t)$ and chemical potentials $μ(t)$ of the dense matter can be extracted from the densities for a given equation of state (EOS). Therefore, including the nuclear thickness is essential for the determination of the $T$ - $μ_B$ trajectory in the QCD phase diagram for relativistic nuclear collisions at low to moderate energies such as the RHIC-BES energies. In this proceeding, we will first discuss our semi-analytical method that includes the nuclear thickness effect and its results on the densities $ε(t), n_B(t), n_Q(t)$ , and $n_S(t)$ . Then, we will show the extracted $T(t), μ_B(t), μ_Q(t)$ , and $μ_S(t)$ for a quark-gluon plasma using the ideal gas EOS with quantum or Boltzmann statistics. Finally, we will show the results on the $T$ - $μ_B$ trajectories in relation to the possible location of the QCD critical end point. This semi-analytical model provides a convenient tool for exploring the trajectories of nuclear collisions in the QCD phase diagram.

preprint2022arXiv

A transport model study of multiparticle cumulants in $p+p$ collisions at 13 TeV

Flow-like signals including the ridge structure observed in small collision systems that are similar to those in large collision systems have led to questions about the onset of collectivity in nuclear collisions. In this study, we use the string melting version of a multi-phase transport (AMPT) model with or without the sub-nucleon geometry for the proton to study multiparticle cumulants in $p+p$ collisions at 13 TeV. Both versions of the model produce negative $c_{2}\{4 \}$ values at high multiplicities. In addition, the dependence of $c_{2}\{4 \}$ on the parton cross section is non-monotonous, where only a range of parton cross section values leads to negative $c_{2} \{4 \}$ . Furthermore, the AMPT model with sub-nucleon geometry better describes the multiplicity dependence of $c_{2} \{4 \}$ , demonstrating the importance of incorporating the sub-nucleon geometry in studies of small collision systems.

preprint2022arXiv

Implication of two-baryon azimuthal correlations in $pp$ collisions at LHC energies on the QGP

The near-side depression in two-proton or two-antiproton azimuthal correlations in $pp$ collisions at $\sqrt{s}=$ 7 TeV has been observed experimentally and then qualitatively reproduced in our earlier studies with a multi-phase transport model. In this study, we further investigate the origin of the depression feature in two-baryon correlations in small collision systems. We find that the initial parton-level spatial correlation, a finite expansion in the parton stage, and quark coalescence are important ingredients leading to the near-side depression. In particular, we find that a finite expansion of the parton system leads to a finite space-momentum correlation at hadronization, which then converts the near-side depression in the coordinate space to that in the momentum space. These results suggest that a partonic matter with a finite lifetime is formed in the pp collisions. Further studies are needed to determine whether the partonic matter is near local equilibrium and can thus be called a QGP or far away from local equilibrium.

preprint2022arXiv

Probing high-density nuclear symmetry energy with $Ξ^{-}/Ξ^{0}$ ratio in heavy-ion collisions at $\sqrt{s_{NN}} \sim 3$ GeV

Recent beam energy scan (BES) experiments at RHIC by the STAR Collaboration (PLB {\bf 827},137003 (2022) and PRL {\bf 128}, 202303 (2022)) found that hadronic interactions dominate the collective flow and the proton cumulant ratios are driven by baryon number conservation in a region of high baryon density in $\sqrt{s_{NN}}$ = 3 GeV Au+Au reactions, indicating the dense medium formed in such collisions is likely hadronic matter. Within an updated ART (A Relativistic Transport) model with momentum dependent isoscalar and isovector single-nucleon mean-field potentials corresponding to different symmetry energies at suprasaturation densities, the $n/p$ , $π^{-}/π^{+}$ , $K_{s}^{0}/K^{+}$ , $Σ^{-}/Σ^{+}$ and $Ξ^{-}/Ξ^{0}$ ratios are studied for central Au+Au collisions at $\sqrt{s_{NN}}$ = 3 GeV where the maximum central density reaches about $(3.6\sim 4.0)ρ_0$ . The doubly strange $Ξ^{-}/Ξ^{0}$ ratio is found to have the strongest sensitivity to the variation of high-density nuclear symmetry energy. Thus, the $Ξ^{-}/Ξ^{0}$ ratio in relativistic heavy-ion reactions at $\sqrt{s_{NN}} \sim 3$ GeV may help probe sensitively the poorly known symmetry energy of dense neutron-rich matter critically important for understanding various properties of neutron stars.

preprint2022arXiv

Thermodynamics of partonic matter in relativistic heavy-ion collisions from a multiphase transport model

Using the string melting version of a multiphase transport model, we focus on the evolution of thermodynamic properties of the central cell of parton matter produced in Au $+$ Au collisions ranging from 200 GeV down to 2.7 GeV. The temperature and chemical potentials have been calculated based on both Boltzmann and quantum statistics in order to locate their evolution trajectories in the QCD phase diagram. We demonstrate that the trajectories can depend on many physical factors, especially the finite nuclear thickness at lower energies. However, from the evolution of pressure anisotropy, only partial thermalization can be achieved when the partonic systems reach the predicted QCD phase boundary. It provides some helpful insights to studying the QCD phase structure through relativistic heavy-ion collisions.

preprint2021arXiv

Calculating the initial energy density in heavy ion collisions by including the finite nuclear thickness

The initial energy density produced in heavy ion collisions can be estimated with the Bjorken energy density formula after choosing a proper formation time $τ{_{\rm F}}$ . However, the Bjorken formula breaks down at low energies because it neglects the finite nuclear thickness. Here we include both the finite time duration and finite longitudinal extension of the initial energy production. When $τ{_{\rm F}}$ is not too much smaller than the crossing time of the two nuclei, our results are similar to those from a previous study that only considers the finite time duration. In particular, we find that at low energies the initial energy density has a much lower maximum value but evolves much longer than the Bjorken formula, while at large-enough $τ{_{\rm F}}$ and/or high-enough energies our result approaches the Bjorken formula. We also find a qualitative difference in that our maximum energy density $ε^{\rm max}$ at $τ{_{\rm F}}=0$ is finite, while the Bjorken formula diverges as $1/τ{_{\rm F}}$ and the previous result diverges as $\ln (1/τ{_{\rm F}})$ at low energies but as $1/τ{_{\rm F}}$ at high energies. Furthermore, our solution of the energy density approximately satisfies a scaling relation. As a result, the $τ{_{\rm F}}$ -dependence of $ε^{\rm max}$ determines the $A$ -dependence, and the weaker $τ{_{\rm F}}$ -dependence of $ε^{\rm max}$ in our results at low energies means a slower increase of $ε^{\rm max}$ with $A$ .

preprint2020arXiv

Particle productions and anisotropic flows from the AMPT model for Cu+Au collisions at $\sqrt{s_{NN}}=200$ GeV

We use the string melting version of a multi-phase transport (AMPT) model to study Cu+Au collisions at $\sqrt{s_{NN}}=200$ GeV. The rapidity distributions of identified hadrons show asymmetric dependences on rapidity. In addition, elliptic and triangular flows at mid-rapidity from the AMPT model for pions, kaons, and protons agree reasonably with the experimental data up to $p_{T}\sim1$ GeV $/c$ . We then investigate the forward/backward asymmetry of $v_2$ and $v_3$ . We find that these anisotropic flows are larger on the Au-going side than the Cu-going side, while the asymmetry tends to go away in very peripheral collisions. We also make predictions on transverse momentum spectra of identified hadrons and longitudinal decorrelations of charged particles, where the average decorrelation of elliptic flow in asymmetric Cu+Au collisions is found to be stronger than that in Au+Au collisions.

preprint2020arXiv

Validation and improvement of the ZPC parton cascade inside a box

Cascade solutions of the Boltzmann equation suffer from causality violation at large densities and/or scattering cross sections. Although the particle subdivision technique can reduce the causality violation, it alters event-by-event correlations and fluctuations and is also computationally expensive. Here we evaluate and then improve the accuracy of the ZPC parton cascade for elastic scatterings inside a box without using parton subdivision. We first test different collision schemes for the collision times and ordering time and find that the default collision scheme does not accurately describe the equilibrium momentum distribution at large opacities. We then find a specific collision scheme that can describe very accurately the equilibrium momentum distribution as well as the time evolution towards equilibrium, even at large opacities. We also calculate the shear viscosity and the $η/s$ ratio of the parton systems and confirm that the new collision scheme is more accurate. In addition, we use a novel parton subdivision method to obtain the "exact" evolution of the system. This subdivision method is valid for such box calculations and is so much more efficient than the standard subdivision method that we use a subdivision factor of $10^6$ in this study.

preprint2016arXiv

Anisotropic parton escape is the dominant source of azimuthal anisotropy in transport models

We trace the development of elliptic anisotropy (v2) via parton-parton collision history in two transport models. The parton v2 is studied as a function of the number of collisions of each parton in Au+Au and d+Au collisions at sNN =200 GeV. It is found that the majority of v2 comes from the anisotropic escape probability of partons, with no fundamental difference at low and high transverse momenta. The contribution to v2 from hydrodynamic-type collective flow is found to be small. Only when the parton-parton cross-section is set unrealistically large does this contribution start to take over. Our findings challenge the current paradigm emerged from hydrodynamic comparisons to anisotropy data.

preprint2016arXiv

Origin of the mass splitting of elliptic anisotropy in a multiphase transport model

The mass splitting of elliptic anisotropy ( $v_2$ ) at low transverse momentum is considered as a hallmark of hydrodynamic collective flow. We investigate a multiphase transport (AMPT) model where the $v_2$ is mainly generated by an anisotropic escape mechanism, not of the hydrodynamic flow nature, and where mass splitting is also observed. We demonstrate that the $v_2$ mass splitting in AMPT is small right after hadronization (especially when resonance decays are included); the mass splitting mainly comes from hadronic rescatterings, even though their contribution to the overall charged hadron $v_2$ is small. These findings are qualitatively the same as those from hybrid models that combine hydrodynamics with a hadron cascade. We further show that there is no qualitative difference between heavy ion collisions and small system collisions. Our results indicate that the $v_2$ mass splitting is not a unique signature of hydrodynamic collective flow and thus cannot distinguish whether the elliptic flow is generated mainly from hydrodynamics or the anisotropic parton escape.

preprint2016arXiv

Predictions for $\sqrt {s_{NN}}=5.02$ TeV Pb+Pb Collisions from a Multi-Phase Transport Model

We present predictions from the string melting version of a multi-phase transport model on various observables in Pb+Pb collisions at $\sqrt {s_{NN}}=5.02$ TeV. We use the same version of the model as an earlier study that reasonably reproduced dN/dy, $p_{\rm T}$ -spectra and elliptic flow of charged pions and kaons at low- $p_{\rm T}$ for central and semi-central heavy ion collisions at 200 GeV and 2.76 TeV. While we compare with the already-available centrality dependence data on charged particle $dN/dη$ at mid-pseudorapidity in Pb+Pb collisions at 5.02 TeV, we make predictions on identified particle dN/dy, $p_{\rm T}$ -spectra, azimuthal anisotropies $v_n (n=2,3,4)$ , and factorization ratios $r_{n}(η^{a},η^{b}) (n=2,3)$ for longitudinal correlations.

preprint2015arXiv

Elliptic Anisotropy $v_2$ May Be Dominated by Particle Escape instead of Hydrodynamic Flow

It is commonly believed that azimuthal anisotropies in relativistic heavy ion collisions are generated by hydrodynamic evolution of the strongly interacting quark-gluon plasma. Here we use transport models to study how azimuthal anisotropies depend on the number of collisions that each parton suffers. We find that the majority of $v_2$ comes from the anisotropic escape of partons, not from the parton collective flow, for semi-central Au+Au collisions at 200A GeV. As expected, the fraction of $v_2$ from the anisotropic particle escape is even higher for smaller systems such as d+Au. Our transport model results also confirm that azimuthal anisotropies would be dominated by hydrodynamic flow at unrealistically-high parton cross sections. Our finding thus naturally explains the similarity of azimuthal anisotropies in small and large systems; however, it presents a challenge to the paradigm of anisotropic flow.

preprint2015arXiv

Studying re-scattering effect in heavy-ion collision through $K^*$ Production

We have studied the $K^*$ production within A Multi-Phase Transport model (AMPT) for Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV to understand the hadronic re-scattering effect on the measured yields of the resonance. The hadronic re-scattering of the $K^*$ decay daughter particles ( $π$ and K) will alter their momentum distribution thereby making it difficult to reconstruct the $K^*$ signal through the invariant mass method. An increased hadronic re-scattering effect thus leads to a decrease in the reconstructed yield of $K^*$ in heavy-ion collisions. Through this simulation study we argue that a decrease in $K^*$ /K ratio with increase in collision centrality necessarily reflects the hadronic re-scattering effect. Since the re-scattering occurs in the hadronic phase and $K^*$ has a lifetime of 4 fm/c, we present a toy model based discussion on using measured $K^*$ /K to put a lower limit on the hadronic phase lifetime in high energy nuclear collisions.

preprint2014arXiv

Evolution of transverse flow and effective temperatures in the parton phase from a multi-phase transport model

I study the space-time evolution of transverse flow and effective temperatures in the dense parton phase with the string melting version of a multi-phase transport model. Parameters of the model are first constrained to reproduce the bulk data on the rapidity density, $p_{\rm T}$ spectrum and elliptic flow at low $p_{\rm T}$ for central and mid-central Au+Au collisions at $200A$ GeV and Pb+Pb collisions at $2760A$ GeV. I then calculate the transverse flow and effective temperatures in volume cells within mid-spacetime-rapidity $|η|<1/2$ . I find that the effective temperatures extracted from different variables, which are all evaluated in the rest frame of a volume cell, can be very different; this indicates that the parton system in the model is not in full chemical or thermal equilibrium locally, even after averaging over many events. In particular, the effective temperatures extracted from the parton energy density or number density are often quite different than those extracted from the parton mean $p_{\rm T}$ or mean energy. For these collisions in general, effective temperatures extracted from the parton energy density or number density are higher than those extracted from the parton mean $p_{\rm T}$ in the inner part of the overlap volume, while the opposite occurs in the outer part of the overlap volume. I argue that this indicates that the dense parton matter in the inner part of the overlap volume is over-populated; I also find that all cells with energy density above 1 GeV/fm $^3$ are over-populated after a couple of fm/ $c$ .

preprint2012arXiv

Effects of hadronic potentials on elliptic flows in relativistic heavy ion collisions

Within the framework of a multiphase transport (AMPT) model that includes both initial partonic and final hadronic interactions, we show that including mean-field potentials in the hadronic phase leads to a splitting of the elliptic flows of particles and their antiparticles, providing thus a plausible explanation of the different elliptic flows between $p$ and ${\bar p}$ , $K^+$ and $K^-$ , and $π^+$ and $π^-$ observed in recent Beam Energy Scan (BES) program at the Relativistic Heavy-Ion Collider (RHIC).

preprint2012arXiv

Multiplicity, average transverse momentum and azimuthal anisotropy in U+U collisions at $\sqrt{s_{NN}}$ = 200 GeV using AMPT model

Using a multi-phase transport (AMPT) model that includes the implementation of deformed Uranium nuclei, we have studied the centrality dependence of the charged particle multiplicity, <pT>, eccentricity (e2), triangularity (e3), their fluctuations, elliptic flow (v2) and triangular flow (v3) for different configurations of U+U collisions at midrapidity for \sqrt(s_NN)=200 GeV. The results are compared to the corresponding observations from Au+Au collisions. We find that for the U+U collisions the dNch/dηat midrapidity is enhanced by about 15-40% depending on the collision and model configuration chosen, compared to Au+Au collisions. The tip-to-tip collisions leads to the largest values of Nch,transverse energy (ET) and <pT>. The <e2> and its fluctuation shows a rich centrality dependence, whereas not much variations are observed for <e3> and its fluctuations. The U+U side-on-side collision configuration provides maximum values of <e2> and minimum values of eccentricity fluctuations, whereas for peripheral collisions and mid-central collisions minimum values of <e2> and maximum value of eccentricity fluctuations are observed for body-to-body configuration and the tip-to-tip configuration has minimum value of <e2> and maximum value of eccentricity fluctuations for central collisions. The calculated v2 closely correlates with the eccentricity in the model. It is smallest for the body-to-body configuration in peripheral and mid-central collisions while it is minimum for tip-to-tip configuration in central collisions. For peripheral collisions the v2 in U+U can be about 40% larger than in Au+Au whereas for central collisions it can be a factor 2 higher depending on the collision configuration. It is also observed that the v3(pT) is higher for tip-to-tip and body-to-body configurations compared to other systems for the collision centrality studied.

preprint2011arXiv

Quark Coalescence with Quark Number Conservation and the Effect on Quark-Hadron Scaling

We develop a new formulation of the quark coalescence model by including the quark number conservation in order to describe the hadronization of the bulk of the quark-gluon plasma. The scalings between hadron and quark phase space distributions are shown to depend on the transverse momentum. For hard quarks, our general scalings reproduce the usual quadratic scaling relation for mesons and the cubic scaling relation for baryons. For softer quarks, however, the inclusion of the quark number conservation leads to a linear scaling for the hadron species that dominates the quark number of each flavor, while the scalings of non-dominant hadrons depend on the coalescence dynamics. For charm mesons, we find that the distribution of soft $D$ mesons does not depend on the light quark distribution but the distribution of soft $J/ψ$ mesons is inversely correlated to the light quark distribution.

preprint2003arXiv

Kaon Interferometry at RHIC from AMPT Model

The two-kaon interferometry at RHIC is studied in a multi-phase transport model. Similar to the pion case, we find strong space-time correlation at freeze-out for the kaon emission source, which results in a large positive $R_{\rm out}-t$ term and tends to reduce the $R_{\rm out}/R_{\rm side}$ ratio. Unlike the pion case, the source radii for kaons determined from the emission function are close to the radius parameters extracted from a Gaussian fit to the correlation function.

preprint2002arXiv

Flavor ordering of elliptic flows at high transverse momentum

Based on the quark coalescence model for the parton-to-hadron phase transition in ultra-relativistic heavy ion collisions, we relate the elliptic flow ( $v_2$ ) of high $\pt$ hadrons to that of high $\pt$ quarks. For high $\pt$ hadrons produced from an isospin symmetric and quark-antiquark symmetric partonic matter, magnitudes of their elliptic flows follow a flavor ordering as $(v_{2,π}=v_{2,N}) > (v_{2,Λ}=v_{2,Σ}) > v_{2,K} > v_{2,Ξ} > (v_{2,ϕ}=v_{2,Ω})$ if strange quarks have a smaller elliptic flow than light quarks. The elliptic flows of high $\pt$ hadrons further follow a simple quark counting rule if strange quarks and light quarks have same high $\pt$ spectrum and coalescence probability.

preprint2001arXiv

Charged particle rapidity distributions at RHIC

Using a multiphase transport model (AMPT), which includes both initial partonic and final hadronic interactions, we study the rapidity distributions of charged particles such as protons, antiprotons, pions, and kaons in heavy ion collisions at RHIC. The theoretical results for the total charged particle multiplicity at midrapidity are consistent with those measured by the PHOBOS collaboration in central Au+Au collisions at $\sqrt s$ = 56 and 130 AGeV. We find that these hadronic observables are much more sensitive to the hadronic interactions than the partonic interactions.

preprint2001arXiv

Multistrange baryon production in relativistic heavy ion collisions

Using a multiphase transport model, we study the production of multistrange baryons from the hadronic matter formed in relativistic heavy ion collisions. The mechanism we introduce is the strangeness-exchange reactions between antikaons and hyperons. We find that these reactions contribute significantly to the production of multistrange baryons in heavy ion collisions at SPS energies, which has been found to be appreciably enhanced. We have also made predictions for multistrange baryon production in heavy ion collisions at RHIC and found a similar enhancement.

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Zi-Wei Lin

Research overview

Is this your work?

21 publications

A Semi-analytical Method of Calculating Nuclear Collision Trajectory in the QCD Phase Diagram

A transport model study of multiparticle cumulants in $p+p$ collisions at 13 TeV

Implication of two-baryon azimuthal correlations in $pp$ collisions at LHC energies on the QGP

Probing high-density nuclear symmetry energy with $Ξ^{-}/Ξ^{0}$ ratio in heavy-ion collisions at $\sqrt{s_{NN}} \sim 3$ GeV

Thermodynamics of partonic matter in relativistic heavy-ion collisions from a multiphase transport model

Calculating the initial energy density in heavy ion collisions by including the finite nuclear thickness

Particle productions and anisotropic flows from the AMPT model for Cu+Au collisions at $\sqrt{s_{NN}}=200$ GeV

Validation and improvement of the ZPC parton cascade inside a box

Anisotropic parton escape is the dominant source of azimuthal anisotropy in transport models

Origin of the mass splitting of elliptic anisotropy in a multiphase transport model

Predictions for $\sqrt {s_{NN}}=5.02$ TeV Pb+Pb Collisions from a Multi-Phase Transport Model

Elliptic Anisotropy $v_2$ May Be Dominated by Particle Escape instead of Hydrodynamic Flow

Studying re-scattering effect in heavy-ion collision through $K^*$ Production

Evolution of transverse flow and effective temperatures in the parton phase from a multi-phase transport model

Effects of hadronic potentials on elliptic flows in relativistic heavy ion collisions

Multiplicity, average transverse momentum and azimuthal anisotropy in U+U collisions at $\sqrt{s_{NN}}$ = 200 GeV using AMPT model

Quark Coalescence with Quark Number Conservation and the Effect on Quark-Hadron Scaling

Kaon Interferometry at RHIC from AMPT Model

Flavor ordering of elliptic flows at high transverse momentum

Charged particle rapidity distributions at RHIC

Multistrange baryon production in relativistic heavy ion collisions

See the researcher in context

Building this map preview

Zi-Wei Lin

Research overview

Is this your work?

21 publications

A Semi-analytical Method of Calculating Nuclear Collision Trajectory in the QCD Phase Diagram

A transport model study of multiparticle cumulants in p+pp+pp+p collisions at 13 TeV

Implication of two-baryon azimuthal correlations in pppppp collisions at LHC energies on the QGP

Probing high-density nuclear symmetry energy with Ξ−/Ξ0Ξ^{-}/Ξ^{0}Ξ−/Ξ0 ratio in heavy-ion collisions at sNN∼3\sqrt{s_{NN}} \sim 3sNN​​∼3 GeV

Thermodynamics of partonic matter in relativistic heavy-ion collisions from a multiphase transport model

Calculating the initial energy density in heavy ion collisions by including the finite nuclear thickness

Particle productions and anisotropic flows from the AMPT model for Cu+Au collisions at sNN=200\sqrt{s_{NN}}=200sNN​​=200 GeV

Validation and improvement of the ZPC parton cascade inside a box

Anisotropic parton escape is the dominant source of azimuthal anisotropy in transport models

Origin of the mass splitting of elliptic anisotropy in a multiphase transport model

Predictions for sNN=5.02\sqrt {s_{NN}}=5.02sNN​​=5.02 TeV Pb+Pb Collisions from a Multi-Phase Transport Model

Elliptic Anisotropy v2v_2v2​ May Be Dominated by Particle Escape instead of Hydrodynamic Flow

Studying re-scattering effect in heavy-ion collision through K∗K^*K∗ Production

Evolution of transverse flow and effective temperatures in the parton phase from a multi-phase transport model

Effects of hadronic potentials on elliptic flows in relativistic heavy ion collisions

Multiplicity, average transverse momentum and azimuthal anisotropy in U+U collisions at sNN\sqrt{s_{NN}}sNN​​ = 200 GeV using AMPT model

Quark Coalescence with Quark Number Conservation and the Effect on Quark-Hadron Scaling

Kaon Interferometry at RHIC from AMPT Model

Flavor ordering of elliptic flows at high transverse momentum

Charged particle rapidity distributions at RHIC

Multistrange baryon production in relativistic heavy ion collisions

See the researcher in context

Building this map preview

A transport model study of multiparticle cumulants in $p+p$ collisions at 13 TeV

Implication of two-baryon azimuthal correlations in $pp$ collisions at LHC energies on the QGP

Probing high-density nuclear symmetry energy with $Ξ^{-}/Ξ^{0}$ ratio in heavy-ion collisions at $\sqrt{s_{NN}} \sim 3$ GeV

Particle productions and anisotropic flows from the AMPT model for Cu+Au collisions at $\sqrt{s_{NN}}=200$ GeV

Predictions for $\sqrt {s_{NN}}=5.02$ TeV Pb+Pb Collisions from a Multi-Phase Transport Model

Elliptic Anisotropy $v_2$ May Be Dominated by Particle Escape instead of Hydrodynamic Flow

Studying re-scattering effect in heavy-ion collision through $K^*$ Production

Multiplicity, average transverse momentum and azimuthal anisotropy in U+U collisions at $\sqrt{s_{NN}}$ = 200 GeV using AMPT model