Source author record

Wilhelm Kley

Wilhelm Kley appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

36works
9topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

36 published item(s)

preprint2022arXiv

Binary orbital evolution driven by a circumbinary disc

The question whether the interaction of a circumbinary disc with the central binary system leads to shrinking or expansion of the binary orbit has attracted considerable interest as it impacts the evolution of binary black holes and stellar binary stars in their formation phase. We performed two-dimensional hydrodynamical simulations of circumbinary discs for a large parameter set of disc viscosities and thicknesses and two different binary mass ratios for binaries on circular orbits. For those we measured carefully the net angular momentum and mass transfer between disc and binary system, and evaluate the normalised specific angular momentum accretion, $j_\mathrm{s}$ . This is compared to the theoretical, critical specific angular momentum change $j_\mathrm{s,crit}$ that separates contracting from expanding cases which depends on the the binary's mass ratio and the relative accretion onto the two stars. Using finite and infinite disc models we show that the inferred binary evolution is very similar for both setups and confirm that $j_\mathrm{s}$ can be measured accurately with cylindrical simulations that do not include the central binary. However, to obtain the relative accretion onto the stars for non-equal mass binaries, simulations that cover the whole domain including the binary are required. We find that for thick discs with aspect ratio $h = 0.1$ the binaries expand for all viscosities, while discs with $h = 0.05$ lead to an expansion only for larger viscosities with $α$ exceeding $\sim 0.005$. Overall, the regime of binary expansion extends to a much wider parameter space than previously anticipated, but for thin, low viscosity discs the orbits shrink.

preprint2022arXiv

How cooling influences circumbinary discs

Circumbinary disc observations and simulations show large, eccentric inner cavities. Recent work has shown that the shape and size of these cavities depend on the aspect ratio and viscosity of the disc, as well as the binary eccentricity and mass ratio. It has been further shown that, for gaps created by planets, the cooling timescale significantly affects the shape and size of the gap. In this study, we consider the effect of different cooling models on the cavity shape in a circumbinary disc. We compare locally isothermal and radiatively cooled disc models to ones with a parametrised cooling timescale ($β$-cooling), implemented in 2D numerical simulations for varying binary eccentricities. While the shape of the cavity for radiative and locally isothermal models remains comparable, the inner disc structure changes slightly, leading to a change in the precession rate of the disc. With $β$-cooled models, the shape and size of the cavity changes dramatically towards values of $β$=1. Based on our findings, we introduce a parametrised $β$ model that accounts for the shorter cooling timescale inside the cavity while adequately reproducing the results of the radiative model, and we highlight that accurate treatment of the thermodynamics inside the cavity has a significant impact in modelling circumbinary systems.

preprint2021arXiv

Giant planet migration during the disc dispersal phase

Transition discs are expected to be a natural outcome of the interplay between photoevaporation (PE) and giant planet formation. Massive planets reduce the inflow of material from the outer to the inner disc, therefore triggering an earlier onset of disc dispersal due to PE through a process known as Planet-Induced PhotoEvaporation (PIPE). In this case, a cavity is formed as material inside the planetary orbit is removed by PE, leaving only the outer disc to drive the migration of the giant planet. We investigate the impact of PE on giant planet migration and focus specifically on the case of transition discs with an evacuated cavity inside the planet location. This is important for determining under what circumstances PE is efficient at halting the migration of giant planets, thus affecting the final orbital distribution of a population of planets. For this purpose, we use 2D FARGO simulations to model the migration of giant planets in a range of primordial and transition discs subject to PE. The results are then compared to the standard prescriptions used to calculate the migration tracks of planets in 1D planet population synthesis models. The FARGO simulations show that once the disc inside the planet location is depleted of gas, planet migration ceases. This contradicts the results obtained by the impulse approximation, which predicts the accelerated inward migration of planets in discs that have been cleared inside the planetary orbit. These results suggest that the impulse approximation may not be suitable for planets embedded in transition discs. A better approximation that could be used in 1D models would involve halting planet migration once the material inside the planetary orbit is depleted of gas and the surface density at the 3:2 mean motion resonance location in the outer disc reaches a threshold value of $0.01\,\mathrm{g\,cm^{-2}}$.

preprint2020arXiv

Importance of radiative effects in gap opening by planets in protoplanetary disks

Recent ALMA observations revealed concentric annular structures in several young class-II objects. In an attempt to produce the rings and gaps in some of these systems, they have been modeled numerically with a single embedded planet assuming a locally isothermal equation of state. This is often justified by observations targeting the irradiation-dominated outer regions of disks (approximately 100 au). We test this assumption by conducting hydrodynamics simulations of embedded planets in thin locally isothermal and radiative disks that mimic the systems HD 163296 and AS 209 in order to examine the effect of including the energy equation in a seemingly locally isothermal environment as far as planet-disk interaction is concerned. We find that modeling such disks with an ideal equation of state makes a difference in terms of the number of produced rings and the spiral arm contrast in the disk. Locally isothermal disks produce sharper annular or azimuthal features and overestimate a single planet's gap-opening capabilities by producing multiple gaps. In contrast, planets in radiative disks carve a single gap for typical disk parameters. Consequently, for accurate modeling of planets with semimajor axes up to about 100 au, radiative effects should be taken into account even in seemingly locally isothermal disks. In addition, for the case of AS 209, we find that the primary gap is significantly different between locally isothermal and radiative models. Our results suggest that multiple planets are required to explain the ring-rich structures in such systems.

preprint2020arXiv

Solid accretion onto planetary cores in radiative disks

The solid accretion rate, necessary to grow gas giant planetary cores within the disk lifetime, has been a major constraint for theories of planet formation. We tested the solid accretion rate efficiency on planetary cores of different masses embedded in their birth disk, by means of 3D radiation-hydrodynamics, where we followed the evolution of a swarm of embedded solids of different sizes. We found that using a realistic equation of state and radiative cooling, the disk at 5 au is able to cool efficiently and reduce its aspect ratio. As a result, the pebble isolation mass is reached before the core grows to 10 Earth masses, stopping efficiently the pebble flux and creating a transition disk. Moreover, the reduced isolation mass halts the solid accretion before the core reaches the critical mass, leading to a barrier to giant planet formation, and it explains the large abundance of super-Earth planets in the observed population.

preprint2019arXiv

The impact of planet wakes on the location and shape of the water iceline in a protoplanetary disk

Context: Planets in accretion disks can excite spiral shocks, and---if massive enough---open gaps in their vicinity. Both of these effects can influence the overall disk thermal structure. Aims: We model planets of different masses and semimajor axes in disks of various viscosities and accretion rates to examine their impact on disk thermodynamics and highlight the mutable, non-axisymmetric nature of icelines in systems with massive planets. Methods: We conduct a parameter study using numerical hydrodynamics simulations where we treat viscous heating, thermal cooling and stellar irradiation as additional source terms in the energy equation, with some runs including radiative diffusion. Our parameter space consists of a grid containing different combinations of planet and disk parameters. Results: Both gap opening and shock heating can displace the iceline, with the effects being amplified for massive planets in optically thick disks. The gap region can split an initially hot (T>170 K) disk into a hot inner disk and a hot ring just outside of the planet's location, while shock heating can reshape the originally axisymmetric iceline into water-poor islands along spirals. We also find that radiative diffusion does not alter the picture significantly in this context. Conclusions: Shock heating and gap opening by a planet can effectively heat up optically thick disks and in general move and/or reshape the water iceline. This can affect the gap structure and migration torques. It can also produce azimuthal features that follow the trajectory of spiral arms, creating hot zones, "islands" of vapor and ice around spirals which could affect the accretion or growth of icy aggregates.

preprint2016arXiv

A smooth particle hydrodynamics code to model collisions between solid, self-gravitating objects

Modern graphics processing units (GPUs) lead to a major increase in the performance of the computation of astrophysical simulations. Owing to the different nature of GPU architecture compared to traditional central processing units (CPUs) such as x86 architecture, existing numerical codes cannot be easily migrated to run on GPU. Here, we present a new implementation of the numerical method smooth particle hydrodynamics (SPH) using CUDA and the first astrophysical application of the new code: the collision between Ceres-sized objects. The new code allows for a tremendous increase in speed of astrophysical simulations with SPH and self-gravity at low costs for new hardware. We have implemented the SPH equations to model gas, liquids and elastic, and plastic solid bodies and added a fragmentation model for brittle materials. Self-gravity may be optionally included in the simulations and is treated by the use of a Barnes-Hut tree. We find an impressive performance gain using NVIDIA consumer devices compared to our existing OpenMP code. The new code is freely available to the community upon request.

preprint2016arXiv

Dynamical friction for supersonic motion in a homogeneous gaseous medium

The supersonic motion of gravitating objects through a gaseous medium constitutes a classical problem in theoretical astrophysics. Its application covers a broad range of objects and scales from planets up to galaxies. Especially the dynamical friction, caused by the forming wake behind the object, plays an important role for the dynamics of the system. To calculate the dynamical friction, standard formulae, based on linear theory are often used. It is our goal to check the general validity of these formulae and provide suitable expressions for the dynamical friction acting on the moving object, based on the basic physical parameters of the problem. We perform sequences of high resolution numerical studies of rigid bodies moving supersonically through a homogeneous medium, and calculate the total drag acting on the object, which is the sum of gravitational and hydro drag. We study cases without gravity with purely hydrodynamical drag, as well as gravitating objects. From the final equilibrium state of the simulations, we compute for gravitating objects the dynamical friction by direct numerical integration of the gravitational pull acting on the embedded object. The numerical experiments confirm the known scaling laws for the dependence of the dynamical friction on the basic physical parameters as derived in earlier semi-analytical studies. As a new important result we find that the shock's stand-off distance is revealed as the minimum spatial interaction scale of dynamical friction. Below this radius, the gas settles into a hydrostatic state, which causes no net gravitational pull onto the moving body. Finally, we derive an analytic estimate for the stand-off distance that can be used to calculate the dynamical friction force.

preprint2016arXiv

Particle dynamics in discs with turbulence generated by the vertical shear instability

Among the candidates for generating turbulence in accretion discs in situations with low intrinsic ionization the vertical shear instability (VSI) has become an interesting candidate, as it relies purely on a vertical gradient in the angular velocity. Existing simulations have shown that $α$-values a few times $10^{-4}$ can be generated. The particle growth in the early planet formation phase is determined by the dynamics of dust particles. Here, we address in particular the efficiency of VSI-turbulence in concentrating particles in order to generate overdensities and low collision velocities. We perform 3D numerical hydrodynamical simulations of accretion discs around young stars that include radiative transport and irradiation from the central star. The motion of particles within a size range of a fraction of mm up to several m is followed using standard drag formula. We confirm that under realistic conditions the VSI is able to generate turbulence in full 3D protoplanetary discs. The irradiated disc shows turbulence within 10 to 60au. The mean radial motion of the gas is such that it is directed inward near the midplane and outward in the surface layers. We find that large particles drift inward with the expected speed, while small particles can experience phases of outward drift. Additionally, the particles show bunching behaviour with overdensities reaching 5 times the average value, which is strongest for dimensionless stopping times around unity. Particles in a VSI-turbulent discs are concentrated in large scale turbulent eddies and show low relative speeds that allow for growing collisions. The reached overdensities will also allow for the onset streaming instabilities further enhancing particle growth. The outward drift for small particles at higher disk elevations allows for the transport of processed high temperature material in the Solar System to larger distances.

preprint2016arXiv

Planet Formation Imager (PFI): science vision and key requirements

The Planet Formation Imager (PFI) project aims to provide a strong scientific vision for ground-based optical astronomy beyond the upcoming generation of Extremely Large Telescopes. We make the case that a breakthrough in angular resolution imaging capabilities is required in order to unravel the processes involved in planet formation. PFI will be optimised to provide a complete census of the protoplanet population at all stellocentric radii and over the age range from 0.1 to about 100 Myr. Within this age period, planetary systems undergo dramatic changes and the final architecture of planetary systems is determined. Our goal is to study the planetary birth on the natural spatial scale where the material is assembled, which is the "Hill Sphere" of the forming planet, and to characterise the protoplanetary cores by measuring their masses and physical properties. Our science working group has investigated the observational characteristics of these young protoplanets as well as the migration mechanisms that might alter the system architecture. We simulated the imprints that the planets leave in the disk and study how PFI could revolutionise areas ranging from exoplanet to extragalactic science. In this contribution we outline the key science drivers of PFI and discuss the requirements that will guide the technology choices, the site selection, and potential science/technology tradeoffs.

preprint2015arXiv

Evolution of circumbinary planets around eccentric binaries: The case of Kepler-34

The existence of planets orbiting a central binary star system immediately raises questions regarding their formation and dynamical evolution. Recent discoveries of circumbinary planets by the Kepler space telescope has shown that some of these planets reside close to the dynamical stability limit where it is very difficult to form planets in situ. For binary systems with nearly circular orbits, such as Kepler-38, the observed proximity of planetary orbits to the stability limit can be understood by an evolutionary process in which planets form farther out in the disk and migrate inward to their observed position. The Kepler-34 system has a high orbital eccentricity of 0.52. Here, we analyse evolutionary scenarios for the planet observed around this system using two-dimensional hydrodynamical simulations. The highly eccentric binary opens a wide inner hole in the disk which is also eccentric, and displays a slow prograde precession. As a result of the large, eccentric inner gap, an embedded planet settles in a final equilibrium position that lies beyond the observed location of Kepler-34 b, but has the correct eccentricity. In this configuration the planetary orbit is aligned with the disk in a state of apsidal corotation.To account for the closer orbit of Kepler-34 b to the central binary, we considered a two-planet scenario and examined the evolution of the system through joint inward migration and capture into mean-motion resonances. When the inner planet orbits inside the gap of the disk, planet-planet scattering ensues. While often one object is thrown into a large, highly eccentric orbit, at times the system is left with a planet close to the observed orbit, suggesting that Kepler 34 might have had two circumbinary planets where one might have been scattered out of the system or into an orbit where it did not transit the central binary during the operation of Kepler.

preprint2015arXiv

How do giant planetary cores shape the dust disk? HL Tau system

We are observing, thanks to ALMA, the dust distribution in the region of active planet formation around young stars. This is a powerful tool to connect observations with theoretical models and improve our understandings of the processes at play. We want to test how a multi-planetary system shapes its birth disk and study the influence of the planetary masses and particle sizes on the final dust distribution. Moreover, we apply our model to the HL Tau system in order to obtain some insights on the physical parameters of the planets that are able to create the observed features. We follow the evolution of a population of dust particles, treated as Lagrangian particles, in two-dimensional, locally isothermal disks where two equal mass planets are present. The planets are kept in fixed orbits and they do not accrete mass. The outer planet plays a major role removing the dust particles in the co-orbital region of the inner planet and forming a particle ring which promotes the development of vortices respect to the single planetary case. The ring and gaps width depends strongly on the planetary mass and particle stopping times, and for the more massive cases the ring clumps in few stable points that are able to collect a high mass fraction. The features observed in the HL Tau system can be explained through the presence of several massive cores that shape the dust disk, where the inner planet(s) should have a mass on the order of 0.07 Jupiter masses and the outer one(s) on the order of 0.35 Jupiter masses. These values can be significantly lower if the disk mass turns out to be less than previously estimated. Decreasing the disk mass by a factor 10 we obtain similar gap widths for planets with a mass of 10 and 20 Earth masses respectively. Although the particle gaps are prominent, the expected gaseous gaps would be barely visible.

preprint2015arXiv

Wave mediated angular momentum transport in astrophysical boundary layers

Context. Disk accretion onto weakly magnetized stars leads to the formation of a boundary layer (BL) where the gas loses its excess kinetic energy and settles onto the star. There are still many open questions concerning the BL, for instance the transport of angular momentum (AM) or the vertical structure. Aims. It is the aim of this work to investigate the AM transport in the BL where the magneto-rotational instability (MRI) is not operating owing to the increasing angular velocity $Ω(r)$ with radius. We will therefore search for an appropriate mechanism and examine its efficiency and implications. Methods. We perform 2D numerical hydrodynamical simulations in a cylindrical coordinate system $(r, φ)$ for a thin, vertically inte- grated accretion disk around a young star. We employ a realistic equation of state and include both cooling from the disk surfaces and radiation transport in radial and azimuthal direction. The viscosity in the disk is treated by the α-model; in the BL there is no viscosity term included. Results. We find that our setup is unstable to the sonic instability which sets in shortly after the simulations have been started. Acoustic waves are generated and traverse the domain, developing weak shocks in the vicinity of the BL. Furthermore, the system undergoes recurrent outbursts where the activity in the disk increases strongly. The instability and the waves do not die out for over 2000 orbits. Conclusions. There is indeed a purely hydrodynamical mechanism that enables AM transport in the BL. It is efficient and wave mediated; however, this renders it a non-local transport method, which means that models of a effective local viscosity like the α-viscosity are probably not applicable in the BL. A variety of further implications of the non-local AM transport are discussed.

preprint2014arXiv

Migration of massive planets in accreting disks

Massive planets that open a gap in the accretion disk are believed to migrate with exactly the viscous speed of the disk, a regime termed type II migration. Population synthesis models indicate that standard type II migration is too rapid to be in agreement with the observations. We study the migration of massive planets between $2\times10^{-4}$ and $2\times10^{-3} M_\odot$ corresponding to 0.2 to 2 Jupiter masses $M_J$. in order to estimate the migration rate in comparison to type II migration. We follow the evolution of planets embedded in two-dimensional, locally isothermal disks with non-zero mass accretion which is explicitly modelled using suitable in- and outflow boundary conditions to ensure a specific accretion rate. After a certain relaxation time we release the planet and measure its migration through the disk and the dependence on parameters such as viscosity, accretion rate and planet mass. We study accreting and non-accretion planets. The inferred migration rate of the planet is determined entirely by the disk torques acting on it and is completely independent of the viscous inflow velocity, so there is no classical type II migration regime. Depending on the local disk mass the migration rate can be faster or slower than type II migration. From the torques and the accretion rate profile in the disk we see that the gap formed by the planet does not separate the inner from the outer disk as necessary for type II migration, rather gas crosses the gap or is accreted onto the planet.

preprint2014arXiv

Modelling Circumbinary Planets: The case of Kepler-38

Recently, a number of planets orbiting binary stars have been discovered by the Kepler space telescope. In a few systems the planets reside close to the dynamical stability limit. Due to the difficulty of forming planets in such close orbits, it is believed that they have formed further out in the disk and migrated to their present locations. Our goal is to construct more realistic models of planet migration in circumbinary disks, and to determine the final position of these planets. In our work, we focus on the system Kepler-38. The evolution of the circumbinary disk is studied using two-dimensional hydrodynamical simulations. We study locally isothermal disks as well as more realistic models with viscous heating, radiative cooling from the disk surfaces, and radiative diffusion in the disk mid plane. After the disk has been brought into equilibrium, a 115 Earth-mass planet is embedded and its evolution is followed. In all cases the planets stop inward migration near the inner edge of the disk. In isothermal disks with a typical disk scale height of H/r = 0.05, the final outcome agrees very well with the observed location of planet Kepler-38b. For the radiative models, the disk thickness and location of the inner edge is determined by the mass in the system. For surface densities in the order of 3000 g/cm^2 at 1 AU, the inner gap lies close to the binary and planets stop in the region between the 5:1 and 4:1 mean-motion resonances with the binary. A model with a disk with approximately a quarter of the mass yields a final position very close to the observed one. For planets migrating in circumbinary disks, the final position is dictated by the structure of the disk. Knowing the observed orbits of circumbinary planets, radiative disk simulations with embedded planets can provide important information on the physical state of the system during the final stages of its evolution.

preprint2014arXiv

Vertical shear instability in accretion disc models with radiation transport

The origin of turbulence in accretion discs is still not fully understood. While the magneto-rotational instability is considered to operate in sufficiently ionized discs, its role in the poorly ionized protoplanetary disc is questionable. Recently, the vertical shear instability (VSI) has been suggested as a possible alternative. Our goal is to study the characteristics of this instability and the efficiency of angular momentum transport, in extended discs, under the influence of radiative transport and irradiation from the central star. We use multi-dimensional hydrodynamic simulations to model a larger section of an accretion disc. First we study inviscid and weakly viscous discs using a fixed radial temperature profile in two and three spatial dimensions. The simulations are then extended to include radiative transport and irradiation from the central star. In agreement with previous studies we find for the isothermal disc a sustained unstable state with a weak positive angular momentum transport of the order of $α\approx 10^{-4}$. Under the inclusion of radiative transport the disc cools off and the turbulence terminates. For discs irradiated from the central star we find again a persistent instability with a similar $α$ value as for the isothermal case. We find that the VSI can indeed generate sustained turbulence in discs albeit at a relatively low level with $α$ about few times $10^{-4}$

preprint2013arXiv

Bouncing Behavior of Microscopic Dust Aggregates

Context: Bouncing collisions of dust aggregates within the protoplanetary may have a significant impact on the growth process of planetesimals. Yet, the conditions that result in bouncing are not very well understood. Existing simulations studying the bouncing behavior used aggregates with an artificial, very regular internal structure. Aims: Here, we study the bouncing behavior of sub-mm dust aggregates that are constructed applying different sample preparation methods. We analyze how the internal structure of the aggregate alters the collisional outcome and determine the influence of aggregate size, porosity, collision velocity, and impact parameter. Methods: We use molecular dynamics simulations where the individual aggregates are treated as spheres that are made up of several hundred thousand individual monomers. The simulations are run on GPUs. Results: Statistical bulk properties and thus bouncing behavior of sub-mm dust aggregates depend heavily on the preparation method. In particular, there is no unique relation between the average volume filling factor and the coordination number of the aggregate. Realistic aggregates bounce only if their volume filling factor exceeds 0.5 and collision velocities are below 0.1 m/s. Conclusions: For dust particles in the protoplanetary nebula we suggest that the bouncing barrier may not be such a strong handicap in the growth phase of dust agglomerates, at least in the size range of 0.1 mm.

preprint2013arXiv

Erosion of dust aggregates

Aims: The aim of this work is to gain a deeper insight into how much different aggregate types are affected by erosion. Especially, it is important to study the influence of the velocity of the impacting projectiles. We also want to provide models for dust growth in protoplanetary disks with simple recipes to account for erosion effects. Methods: To study the erosion of dust aggregates we employed a molecular dynamics approach that features a detailed micro-physical model of the interaction of spherical grains. For the first time, the model has been extended by introducing a new visco-elastic damping force which requires a proper calibration. Afterwards, different sample generation methods were used to cover a wide range of aggregate types. Results: The visco-elastic damping force introduced in this work turns out to be crucial to reproduce results obtained from laboratory experiments. After proper calibration, we find that erosion occurs for impact velocities of 5 m/s and above. Though fractal aggregates as formed during the first growth phase are most susceptible to erosion, we observe erosion of aggregates with rather compact surfaces as well. Conclusions: We find that bombarding a larger target aggregate with small projectiles results in erosion for impact velocities as low as a few m/s. More compact aggregates suffer less from erosion. With increasing projectile size the transition from accretion to erosion is shifted to higher velocities. This allows larger bodies to grow through high velocity collisions with smaller aggregates.

preprint2013arXiv

Growth and fragmentation of centimetre-sized dust aggregates: the dependence on aggregate size and porosity

We carry out three-dimensional Smoothed Particle Hydrodynamics simulations of spherical homogeneous SiO2 dust aggregates to investigate how the mass and the porosity of the aggregates affects their ability to survive an impact at various different collision velocities (between 1 - 27.5m/s). We explore how the threshold velocities for fragmentation vary with these parameters. Crucially, we find that the porosity plays a part of utmost importance in determining the outcome of collisions. In particular, we find that aggregates with filling factors >37% are significantly weakened and that the velocity regime in which the aggregates grow is reduced or even non-existent (instead, the aggregates either rebound off each other or break apart). At filling factors less than ~37% we find that more porous objects are weaker but not as weak as highly compact objects with filling factors >37%. In addition we find that (for a given aggregate density) collisions between very different mass objects have higher threshold velocities than those between very similar mass objects. We find that fragmentation velocities are higher than the typical values of 1m/s and that growth can even occur for velocities as high as 27.5m/s. Therefore, while the growth of aggregates is more likely if collisions between different sized objects occurs or if the aggregates are porous with filling factor <37%, it may also be hindered if the aggregates become too compact.

preprint2013arXiv

Magnetized Accretion and Dead Zones in Protostellar Disks

The edges of magnetically-dead zones in protostellar disks have been proposed as locations where density bumps may arise, trapping planetesimals and helping form planets. Magneto-rotational turbulence in magnetically-active zones provides both accretion of gas on the star and transport of mass to the dead zone. We investigate the location of the magnetically-active regions in a protostellar disk around a solar-type star, varying the disk temperature, surface density profile, and dust-to-gas ratio. We also consider stellar masses between 0.4 and 2 $M_\odot$, with corresponding adjustments in the disk mass and temperature. The dead zone's size and shape are found using the Elsasser number criterion with conductivities including the contributions from ions, electrons, and charged fractal dust aggregates. The charged species' abundances are found using the approach proposed by S. Okuzumi. The dead zone is in most cases defined by the ambipolar diffusion. In our maps, the dead zone takes a variety of shapes, including a fish-tail pointing away from the star and islands located on and off the midplane. The corresponding accretion rates vary with radius, indicating locations where the surface density will increase over time, and others where it will decrease. We show that density bumps do not readily grow near the dead zone's outer edge, independently of the disk parameters and the dust properties. Instead, the accretion rate peaks at the radius where the gas-phase metals freeze out. This could lead to clearing a valley in the surface density, and to a trap for pebbles located just outside the metal freeze-out line.

preprint2013arXiv

Modelling Accretion in Transitional Disks

Transitional disks are protoplanetary disk around young stars that display inner holes in the dust distribution within a few AU, which is accompanied nevertheless by some gas accretion onto the central star. These cavities could possibly be created by the presence of one or more massive planets. If the gap is created by planets and gas is still present in it, then there should be a flow of gas past the planet into the inner region. It is our goal to study the mass accretion rate into the gap and in particular the dependency on the planet's mass and the thermodynamic properties of the disk. We performed 2D hydro simulations for disks with embedded planets. We added radiative cooling from the disk surfaces, radiative diffusion in the disk midplane, and stellar irradiation to the energy equation to have more realistic models. The mass flow rate into the gap region depends, for given disk thermodynamics, non-monotonically on the mass of the planet. Generally, more massive planets open wider and deeper gaps which would tend to reduce the mass accretion into the inner cavity. However, for larger mass planets the outer disk becomes eccentric and the mass flow rate is enhanced over the low mass cases. As a result, for the isothermal disks the mass flow is always comparable to the expected mass flow of unperturbed disks M_d, while for more realistic radiative disks the mass flow is very small for low mass planets (<= 4 M_jup) and about 50% for larger planet masses. For the radiative disks that critical planet mass for the disk to become eccentric is much larger that in the isothermal case. Massive embedded planets can reduce the mass flow across the gap considerably, to values of about an order of magnitude smaller than the standard disk accretion rate, and can be responsible for opening large cavities. The remaining mass flow into the central cavity is in good agreement with the observations.

preprint2013arXiv

Planet-Disc Interactions and Early Evolution of Planetary Systems

The great diversity of extrasolar planetary systems has challenged our understanding of how planets form, and how their orbits evolve as they form. Among the various processes that may account for this diversity, the gravitational interaction between planets and their parent protoplanetary disc plays a prominent role in shaping young planetary systems. Planet-disc forces are large, and the characteristic times for the evolution of planets orbital elements are much shorter than the lifetime of protoplanetary discs. The determination of such forces is challenging, because it involves many physical mechanisms and it requires a detailed knowledge of the disc structure. Yet, the intense research of the past few years, with the exploration of many new avenues, represents a very significant improvement on the state of the discipline. This chapter reviews current understanding of planet-disc interactions, and highlights their role in setting the properties and architecture of observed planetary systems.

preprint2013arXiv

Protoplanetary disk evolution and stellar parameters of T Tauri binaries in Chamaeleon I

This study aims to determine the impact of stellar binary companions on the lifetime and evolution of circumstellar disks in the Chamaeleon I (Cha I) star-forming region by measuring the frequency and strength of accretion and circumstellar dust signatures around the individual components of T Tauri binary stars. We used high-angular resolution adaptive optics JHKL'-band photometry and 1.5-2.5mu spectroscopy of 19 visual binary and 7 triple stars in Cha I - including one newly discovered tertiary component - with separations between ~25 and ~1000au. The data allowed us to infer stellar component masses and ages and, from the detection of near-infrared excess emission and the strength of Brackett-gamma emission, the presence of ongoing accretion and hot circumstellar dust of the individual stellar component of each binary. Of all the stellar components in close binaries with separations of 25-100au, 10(+15-5)% show signs of accretion. This is less than half of the accretor fraction found in wider binaries, which itself appears significantly reduced (~44%) compared with previous measurements of single stars in Cha I. Hot dust was found around 50(+30-15)% of the target components, a value that is indistinguishable from that of Cha I single stars. Only the closest binaries (<25au) were inferred to have a significantly reduced fraction (<~25%) of components that harbor hot dust. Accretors were exclusively found in binary systems with unequal component masses M_secondary/M_primary < 0.8, implying that the detected accelerated disk dispersal is a function of mass-ratio. This agrees with the finding that only one accreting secondary star was found, which is also the weakest accretor in the sample. The results imply that disk dispersal is more accelerated the stronger the dynamical disk truncation, i.e., the smaller the inferred radius of the disk. (abridged)

preprint2013arXiv

Radiation hydrodynamics integrated in the code PLUTO

The transport of energy through radiation is very important in many astrophysical phenomena. In dynamical problems the time-dependent equations of radiation hydrodynamics have to be solved. We present a newly developed radiation-hydrodynamics module specifically designed for the versatile MHD code PLUTO. The solver is based on the flux-limited diffusion approximation in the two-temperature approach. All equations are solved in the co-moving frame in the frequency independent (grey) approximation. The hydrodynamics is solved by the different Godunov schemes implemented in PLUTO, and for the radiation transport we use a fully implicit scheme. The resulting system of linear equations is solved either using the successive over-relaxation (SOR) method (for testing purposes), or matrix solvers that are available in the PETSc library. We state in detail the methodology and describe several test cases in order to verify the correctness of our implementation. The solver works in standard coordinate systems, such as Cartesian, cylindrical and spherical, and also for non-equidistant grids. We have presented a new radiation-hydrodynamics solver coupled to the MHD-code \PLUTO that is a modern, versatile and efficient new module for treating complex radiation hydrodynamical problems in astrophysics. As test cases, either purely radiative situations, or full radiation-hydrodynamical setups (including radiative shocks and convection in accretion discs) have been studied successfully. The new module scales very well on parallel computers using MPI. For problems in star or planet formation, we have added the possibility of irradiation by a central source.

preprint2013arXiv

The Boundary Layer in compact binaries

Disk accretion onto stars leads to the formation of a Boundary Layer (BL) near the stellar surface where the disk makes contact with the star. Albeit a large fraction of the total luminosity of the system originates from this tiny layer connecting the accretion disk and the accreting object, its structure has not been fully understood yet. It is the aim of this work, to obtain more insight into the Boundary Layer around the white dwarf in compact binary systems. There are still many uncertainties concerning the extent and temperature of the BL and the rotation rate of the white dwarf. We perform numerical hydrodynamical simulations, where the problem is treated in a one-dimensional, radial approximation (slim disk). The turbulence is described by the alpha parameter viscosity. We include both cooling from the disk surfaces and radial radiation transport. The radiation energy is treated in the one-temperature approximation. For a given M_dot our results show a strong dependence on the stellar mass and rotation rate. Both, the midplane and the effective temperature rise considerably with increasing stellar mass or decreasing stellar rotation rate. Our simulations further show, that the radiation energy and pressure are indeed important in the BL. However, some models show a low optical depth in the BL, making it necessary to find a better representation for optically thin regions. The combination of a high mass and a small radius, such as in white dwarfs, can lead to an enormous energy release in the BL, provided the WD rotates slowly. Since the radial extent of BLs is typically very small (about 0.02 to 0.05 R_star), this leads to surface temperatures of a few hundred thousand Kelvin. All of our models showed subsonic infall velocities with Mach numbers of < 0.4 at most.

preprint2012arXiv

Circumstellar disks in binary star systems

In this paper we study the evolution of viscous and radiative circumstellar disks under the influence of a companion star. We focus on the eccentric γ Cephei and α Centauri system as examples and compare the disk quantities such as disk eccentricity and precession rate to previous isothermal simulations. We perform two-dimensional hydrodynamical simulations of the binary star systems under the assumption of coplanarity of the disk, host star and binary companion. We use the grid-based, staggered mesh code FARGO with an additional energy equation to which we added radiative cooling based on opacity tables. The eccentric binary companion perturbs the disk around the primary star periodically. Upon passing periastron spirals arms are induced that wind from the outer disk towards the star. In isothermal simulations this results in disk eccentricities up to ε_disk ~ 0.2, but in more realistic radiative models we obtain much smaller eccentricities of about ε_disk ~ 0.04 - 0.06 with no real precession. Models with varying viscosity and disk mass indicate show that disks with less mass have lower temperatures and higher disk eccentricity. The rather large high disk eccentricities, as indicated in previous isothermal disk simulations, implied a more difficult planet formation in the γ Cephei system due to the enhanced collision velocities of planetesimals. We have shown that under more realistic conditions with radiative cooling the disk become less eccentric and thus planet formation may be made easier. However, we estimate that the viscosity in the disk has to very small, with α \lesssim 0.001, because otherwise the disk's lifetime will be too short to allow planet formation to occur along the core instability scenario. We estimate that the periodic heating of the disk in eccentric binaries will be observable in the mid-IR regime.

preprint2012arXiv

Compression Behaviour of Porous Dust Agglomerates

The early planetesimal growth proceeds through a sequence of sticking collisions of dust agglomerates. Very uncertain is still the relative velocity regime in which growth rather than destruction can take place. The outcome of a collision depends on the bulk properties of the porous dust agglomerates. Continuum models of dust agglomerates require a set of material parameters that are often difficult to obtain from laboratory experiments. Here, we aim at determining those parameters from ab-initio molecular dynamics simulations. Our goal is to improveon the existing model that describe the interaction of individual monomers. We use a molecular dynamics approach featuring a detailed micro-physical model of the interaction of spherical grains. The model includes normal forces, rolling, twisting and sliding between the dust grains. We present a new treatment of wall-particle interaction that allows us to perform customized simulations that directly correspond to laboratory experiments. We find that the existing interaction model by Dominik & Tielens leads to a too soft compressive strength behavior for uni and omni-directional compression. Upon making the rolling and sliding coefficients stiffer we find excellent agreement in both cases. Additionally, we find that the compressive strength curve depends on the velocity with which the sample is compressed. The modified interaction strengths between two individual dust grains will lead to a different behaviour of the whole dust agglomerate. This will influences the sticking probabilities and hence the growth of planetesimals. The new parameter set might possibly lead to an enhanced sticking as more energy can be stored in the system before breakup.

preprint2012arXiv

Low-mass planets in nearly inviscid disks: Numerical treatment

Embedded planets disturb the density structure of the ambient disk and gravitational back-reaction will induce possibly a change in the planet's orbital elements. The accurate determination of the forces acting on the planet requires careful numerical analysis. Recently, the validity of the often used fast orbital advection algorithm (FARGO) has been put into question, and special numerical resolution and stability requirements have been suggested. In this paper we study the process of planet-disk interaction for small mass planets of a few Earth masses, and reanalyze the numerical requirements to obtain converged and stable results. One focus lies on the applicability of the FARGO-algorithm. Additionally, we study the difference of two and three-dimensional simulations, compare global with local setups, as well as isothermal and adiabatic conditions. We study the influence of the planet on the disk through two- and three-dimensional hydrodynamical simulations. To strengthen our conclusions we perform a detailed numerical comparison where several upwind and Riemann-solver based codes are used with and without the FARGO-algorithm. With respect to the wake structure and the torque density acting on the planet we demonstrate that the FARGO-algorithm yields correct results, and that at a fraction of the regular cpu-time. We find that the resolution requirements for achieving convergent results in unshocked regions are rather modest and depend on the pressure scale height of the disk. By comparing the torque densities of 2D and 3D simulations we show that a suitable vertical averaging procedure for the force gives an excellent agreement between the two. We show that isothermal and adiabatic runs can differ considerably, even for adiabatic indices very close to unity.

preprint2012arXiv

The physics of protoplanetesimal dust agglomerates. VII The low-velocity collision behavior of large dust agglomerates

We performed micro-gravity collision experiments in our laboratory drop-tower using 5-cm-sized dust agglomerates with volume filling factors of 0.3 and 0.4, respectively. This work is an extension of our previous experiments reported in Beitz et al. (2011) to aggregates of more than one order of magnitude higher masses. The dust aggregates consisted of micrometer-sized silica particles and were macroscopically homogeneous. We measured the coefficient of restitution for collision velocities ranging from 1 cm/s to 0.5 m/s, and determined the fragmentation velocity. For low velocities, the coefficient of restitution decreases with increasing impact velocity, in contrast to findings by Beitz et al. (2011). At higher velocities, the value of the coefficient of restitution becomes constant, before the aggregates break at the onset of fragmentation. We interpret the qualitative change in the coefficient of restitution as the transition from a solid-body-dominated to a granular-medium-dominated behavior. We complement our experiments by molecular dynamics simulations of porous aggregates and obtain a reasonable match to the experimental data. We discuss the importance of our experiments for protoplanetary disks, debris disks, and planetary rings. The work is an extensional study to previous work of our group and gives a new insight in the velocity dependency of the coefficient of restitution due to improved measurements, better statistics and a theoretical approach.

preprint2011arXiv

The four-populations model: a new classification scheme for pre-planetesimal collisions

Within the collision growth scenario for planetesimal formation, the growth step from centimetre sized pre-planetesimals to kilometre sized planetesimals is still unclear. The formation of larger objects from the highly porous pre-planetesimals may be halted by a combination of fragmentation in disruptive collisions and mutual rebound with compaction. However, the right amount of fragmentation is necessary to explain the observed dust features in late T Tauri discs. Therefore, detailed data on the outcome of pre-planetesimal collisions is required and has to be presented in a suitable and precise format. We propose and apply a new classification scheme for pre-planetesimal collisions based on the quantitative aspects of four fragment populations: the largest and second largest fragment, a power-law population, and a sub-resolution population. For the simulations of pre-planetesimal collisions, we adopt the SPH numerical scheme with extensions for the simulation of porous solid bodies. By means of laboratory benchmark experiments, this model was previously calibrated and tested for the correct simulation of the compaction, bouncing, and fragmentation behaviour of macroscopic highly porous silica dust aggregates. It is shown that previous attempts to map collision data were much too oriented on qualitatively categorising into sticking, bouncing, and fragmentation events. We show that the four-populations model encompasses all previous categorisations and in addition allows for transitions. This is because it is based on quantitative characteristic attributes of each population such as the mass, kinetic energy, and filling factor. As a demonstration of the applicability and the power of the four-populations model, we utilise it to present the results of a study on the influence of collision velocity in head-on collisions of intermediate porosity aggregates.

preprint2010arXiv

Fast and accurate frequency-dependent radiation transport for hydrodynamics simulations in massive star formation

Context: Radiative feedback plays a crucial role in the formation of massive stars. The implementation of a fast and accurate description of the proceeding thermodynamics in pre-stellar cores and evolving accretion disks is therefore a main effort in current hydrodynamics simulations. Aims: We introduce our newly implemented three-dimensional frequency dependent radiation transport algorithm for hydrodynamics simulations of spatial configurations with a dominant central source. Methods: The module combines the advantage of the speed of an approximate Flux Limited Diffusion (FLD) solver with the high accuracy of a frequency dependent first order ray-tracing routine. Results: We prove the viability of the scheme in a standard radiation benchmark test compared to a full frequency dependent Monte-Carlo based radiative transfer code. The setup includes a central star, a circumstellar flared disk, as well as an envelope. The test is performed for different optical depths. Considering the frequency dependence of the stellar irradiation, the temperature distributions can be described precisely in the optically thin, thick, and irradiated transition regions. Resulting radiative forces onto dust grains are reproduced with high accuracy. The achievable parallel speedup of the method imposes no restriction on further radiative (magneto-) hydrodynamics simulations. Conclusions: The proposed approximate radiation transport method enables frequency dependent radiation hydrodynamics studies of the evolution of pre-stellar cores and circumstellar accretion disks around an evolving massive star in a highly efficient and accurate manner.

preprint2010arXiv

Formation of the resonant system HD 60532

Among multi-planet planetary systems there are a large fraction of resonant systems. Studying the dynamics and formation of these systems can provide valuable informations on processes taking place in protoplanetary disks where the planets are thought have been formed. The recently discovered resonant system HD 60532 is the only confirmed case, in which the central star hosts a pair of giant planets in 3:1 mean motion resonance. We intend to provide a physical scenario for the formation of HD 60532, which is consistent with the orbital solutions derived from the radial velocity measurements. Observations indicate that the system is in an antisymmetric configuration, while previous theoretical investigations indicate an asymmetric equilibrium state. The paper aims at answering this discrepancy as well. We performed two-dimensional hydrodynamical simulations of thin disks with an embedded pair of massive planets. Additionally, migration and resonant capture are studied by gravitational N-body simulations that apply properly parametrized non-conservative forces. Our simulations suggest that the capture into the 3:1 mean motion resonance takes place only for higher planetary masses, thus favouring orbital solutions having relatively smaller inclination i=20 degrees. The system formed by numerical simulations qualitatively show the same behaviour as HD 60532. We also find that the presence of an inner disk (between the inner planet and the star) plays a very important role in determining the final configurations of resonant planetary systems. Its damping effect on the inner planet's eccentricity is responsible for the observed antisymmetric state of HD 60532.

preprint2009arXiv

The Dynamical Origin of the Multi-Planetary System HD45364

The recently discovered planetary system HD45364 which consists of a Jupiter and Saturn mass planet is very likely in a 3:2 mean motion resonance. The standard scenario to form planetary commensurabilities is convergent migration of two planets embedded in a protoplanetary disc. When the planets are initially separated by a period ratio larger than two, convergent migration will most likely lead to a very stable 2:1 resonance for moderate migration rates. To avoid this fate, formation of the planets close enough to prevent this resonance may be proposed. However, such a simultaneous formation of the planets within a small annulus, seems to be very unlikely. Rapid type III migration of the outer planet crossing the 2:1 resonance is one possible way around this problem. In this paper, we investigate this idea in detail. We present an estimate for the required convergent migration rate and confirm this with N-body and hydrodynamical simulations. If the dynamical history of the planetary system had a phase of rapid inward migration that forms a resonant configuration, we predict that the orbital parameters of the two planets are always very similar and hence should show evidence of that. We use the orbital parameters from our simulation to calculate a radial velocity curve and compare it to observations. Our model can explain the observational data as good as the previously reported fit. The eccentricities of both planets are considerably smaller and the libration pattern is different. Within a few years, it will be possible to observe the planet-planet interaction directly and thus distinguish between these different dynamical states.

preprint2008arXiv

Migration of Protoplanets in Radiative Disks

In isothermal disks the migration of protoplanets is directed inward. For small planetary masses the standard type-I migration rates are so fast that this may result in an unrealistic loss of planets into the stars. We investigate the planet-disk interaction in non-isothermal disks and analyze the magnitude and direction of migration for an extended range of planet masses. We have performed detailed two-dimensional numerical simulations of embedded planets including heating/cooling effects as well as radiative diffusion for realistic opacities. In radiative disks, small planets with M_planet < 50 M_Earth do migrate outward with a rate comparable to absolute magnitude of standard type-I migration. For larger masses the migration is inward and approaches the isothermal, type-II migration rate. Our findings are particularly important for the first growth phase of planets and ease the problem of too rapid inward type-I migration.

preprint2008arXiv

Simulations of eccentric disks in close binary systems

We study the development of finite eccentricity in accretion disks in close binary systems using a two-dimensional grid-based numerical scheme. We perform detailed parameter studies to explore the dependence on viscosity, disk aspect ratio, the inclusion of a mass-transfer stream and the role of the boundary conditions. We consider mass ratios 0.05<q<0.3 appropriate to superoutbursting cataclysmic binary systems. Instability to the formation of a precessing eccentric disk that attains a quasi-steady state with mean eccentricity in the range 0.3-0.5 occurs readily. The shortest growth times are ~15 binary orbits for the largest viscosities and the instability mechanism is for the most part consistent with the mode-coupling mechanism associated with the 3:1 resonance proposed by Lubow. However, the results are sensitive to the treatment of the inner boundary and to the incorporation of the mass-transfer stream. In the presence of a stream we found a critical viscosity below which the disk remains circular. Incorporation of a mass-transfer stream tends to impart stability for small enough viscosity (or, equivalently, mass-transfer rate through the disk) and does assist in obtaining a prograde precession rate that is in agreement with observations. For the larger q the location of the 3:1 resonance is pushed outwards towards the Roche lobe where higher-order mode couplings and nonlinearity occur. It is likely that three-dimensional simulations that properly resolve the disk's vertical structure are required to make significant progress in this case.

preprint2001arXiv

Nested-grid calculations of disk-planet interaction

We study the evolution of embedded protoplanets in a protostellar disk using very high resolution nested-grid computations. This method allows us to perform global simulations of planets orbiting in disks and, at the same time, to resolve in detail the dynamics of the flow inside the Roche lobe of the planet. The primary interest of this work lies in the analysis of the gravitational torque balance acting on the planet. For this purpose we study planets of different masses, ranging from one Earth-mass up to one Jupiter-mass, assuming typical parameters of the protostellar disk. The high resolution of the method allows a precise determination of the mass flow onto the planet and the resulting torques. The obtained migration time scales are in the range from few times 10^4 years, for intermediate mass planets, to 10^6 years, for very low and high mass planets. Typical growth time scales depend strongly on the planetary mass, ranging from a few hundred years, in the case of Earth-type planets, to several ten thousand years, in the case of Jupiter-type planets.