BZPEERReading, trust and collaboration for researchDiscover
Workspaces
Network
Opportunities
Account
Researcher profile
Wilfried Blanc contributes to research discovery and scholarly infrastructure.
Trust snapshot
Actions
Identity and collaboration
Claiming links this public author record to a researcher profile and unlocks direct collaboration workflows.
Log in to claimDirect collaboration
Claim this author entity first to unlock direct invitations.
Research graph
Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.
BZPEER is loading the nearby papers, people, topics and institutions for this page.
Published work
Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration.
Developing of new rare-earth (RE)-doped optical fibres for power amplifiers and lasers requires continuous improvements in the fibre spectroscopic properties (like shape and width of the gain curve, optical quantum efficiency, resistance to spectral hole burning and photodarkening...). Silica glass as a host material for fibres has proved to be very attractive. However, some potential applications of RE-doped fibres suffer from limitations in terms of spectroscopic properties resulting from clustering or inappropriate local environment when doped into silica. To this aim, we present a new route to modify some spectroscopic properties of RE ions in silica-based fibres based on the incorporation of erbium ions in amorphous dielectric nanoparticles, grown in-situ in fibre preforms. By adding alkaline earth elements, in low concentration into silica, one can obtain a glass with an immiscibility gap. Then, phase separation occurs under an appropriate heat treatment. We investigated the role of three alkaline-earth elements: magnesium, calcium and strontium. We present the achieved stabilisation of nanometric erbium-doped dielectric nanoparticles within the core of silica fibres. We present the nanoparticle dimensional characterisation in fibre samples. We also show the spectroscopic characterisation of erbium in preform and fibre samples with different compositions. This new route could have important potentials in improving RE-doped fibre amplifiers and laser sources.
Waves billiard which are chaotic in the geometrical limit are known to support non-generic spatially localized modes called scar modes. The interaction of the scar modes with gain has been recently investigated in optics in micro-cavity lasers and vertically-cavity surface-emitting lasers. Exploiting the localization properties of scar modes in their wave analogous phase space representation, we report experimental results of scar modes selection by gain in a doped D-shaped optical fiber.
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to prevent the cooperative upconversion and quenching processes. The fabricated fibers featured pump absorption up to 70dB/m at a pump wavelength of 1611nm. The single-frequency master oscillator with a resonator composed of a pair of fiber Bragg gratings and a thulium-doped fiber was demonstrated with predominantly single ended operation. We achieved a slope efficiency of 22% and a threshold of 22mW at a lasing wavelength of 1944nm.
The chapter is situated in the fields of fiber materials sciences and technologies (particularly dealing with the fiber glass compositions and luminescent ion doping, and transparent glass ceramic optical fibers), and applications such as fiber lasers and amplifiers. We propose to present a review of research activities on rare-earth (RE) and transition metals (TM) doped silica-based optical fibers, aiming at understanding theier spectral properties, and particularly some of their optical transitions that will allow interesting and alternative applications. Silica, as opposed to alternative, low temperature materials, is chosen for practical and economical reasons. Selected RE and TM ions are studied both as probes of their local environment and for their application potentials. In this chapter, we will focus on erbium (Er) ions for the potential spectral 'tailoring' of its gain curve at 1.55 $μ$m, thulium (Tm) as local environment probe along both near infrared transitions around 0.8 and 1.47 $μ$m, and chromium (Cr) for the sensitivity of valency and spectroscopy to the glass composition and its potential as saturable absorber in lasers. We will present some extensive studies on the influence of the local environment on dopants: such as (but not limited to) energy transfer mechanisms between rare-earth ions of same nature (Tm-Tm) or different nature (Yb-Tm), effect of the local phonon energy on Tm ions emission efficiency, broadening of Er ions emission induced by oxide nanoparticles grown in situ during the fabrication process, etc. Knowledge of these effects is essential for photonics applications, and many studies are under progress or are still needed in this field. The potential of some applications which could benefit from the basic studies on materials are also numerically studied : 0.8-$μ$m thulium-doped fiber laser, so-called S-band (1.47 $μ$m) thulium-doped amplifier for telecommunications and laser applications, sensitisation of Tm-based devices using ytterbium sensitized ions.
Silica-based thulium-doped fiber devices operating around 810 nm would extend the spectral range covered by high- power fiber devices. Using a comprehensive numerical model of the fiber we have shown that efficient lasing at 810 nm can be achieved for specific ranges of the laser cavity parameters in silica-based thulium-doped fibers with enhanced 3H4 lifetime up to 58 \mus as measured in our highly alumina-codoped fibers. We present optimization of the thulium-doped fiber and laser cavity parameters and also potential applications of the developed host material in amplifiers and broadband sources.
Rare earth (RE) doped silica-based optical fibers with transparent glass ceramic (TGC) core was fabricated through the well-known modified chemical vapor deposition (MCVD) process without going through the commonly used stage of post-ceramming. The main characteristics of the RE-doped oxyde nanoparticles namely, their density and mean diameter in the fibers are dictated by the concentration of alkaline earth element used as phase separating agent. Magnesium and erbium co-doped fibers were fabricated. Optical transmission in term of loss due to scattering as well as some spectroscopic characteristics of the erbium ions was studied. For low Mg content, nano-scale particles could be grown with and relatively low scattering losses were obtained, whereas large Mg-content causes the growth of larger particles resulting in much higher loss. However in the latter case, certain interesting alteration of the spectroscopic properties of the erbium ions were observed. These initial studies should be useful in incorporating new doped materials in order to realize active optical fibers for constructing lasers and amplifiers.
An efficient method to fabricate transparent glass ceramic fibers containing in-situ grown Er3+-doped oxide nanoparticles is presented. Characterization of the drawn fibers exhibits low loss (0.4 dB/m) and broadened Er3+ emission spectrum. This attractive method offers new scopes for fiber amplifiers.
In rare-earth-doped silica optical fibres, the homogeneous distribution of amplifying ions and part of their spectroscopic properties are usually improved by adding selected elements, such as phosphorus or aluminum, as structural modifier. In erbium ion (Er3+) doped fibres, phosphorus preferentially coordinates to Er3+ ions to form regular cages around it. However, the crystalline structures described in literature never gave particular spectroscopic signature. In this article, we report emission and excitation spectra of Er3+ in a transparent phosphorus-doped silica fibre preform. The observed line features observed at room and low temperature are attributed to ErPO4 crystallites.
The role of some glass network modifiers on the quantum efficiency of the near-infrared fluorescence from the 3H4 level of Tm3+ ion in silica-based doped fibres is studied. Modifications of the core composition affect the spectroscopic properties of Tm3+ ion. Adding 17.4 mol% of AlO3/2 to the core glass caused an increase of the 3H4 level lifetime up to 50 $μ$s, 3.6 times higher than in pure silica glass. The quantum efficiency was increased from 2% to approximately 8%. On the opposite, 8 mol% of PO5/2 in the core glass made the lifetime decrease downto 9 $μ$s. These changes of Tm3+ optical properties are assigned to the change of the local phonon energy to which they are submitted by modifiers located in the vicinity of the doping sites. Some qualitative predictions of the maximum achievable quantum efficiency are possible using a simple microscopic model to calculate the non-radiative de-excitation rates.
The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\degree C in a six-hole MOF, and the maximum sensitivity is reduced. Such passive FBG temperature compensation technique is of great interest for applications involving accurate sensing free of thermal effects.