Researcher profile

V. P. Koshelets

V. P. Koshelets contributes to research discovery and scholarly infrastructure.

ResearcherAffiliation not importedOpen to collaborate

Trust snapshot

Quick read

Trust 21 - Emerging
19works
0followers
4topics
4close collaborators

Actions

Decide how to stay connected

Follow researcher0

Research graph

See the researcher in context

Open full explorer

Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.

Building this graph slice

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

19 published item(s)

preprint2015arXiv

Thermal and electromagnetic properties of Bi$_2$Sr$_2$CaCu$_2$O$_8$ intrinsic Josephson junction stacks studied via one-dimensional coupled sine-Gordon equations

We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $300\,μ\mathrm{m}$ long intrinsic Josephson junction stack consisting of $N = 700$ junctions. The junctions in the stack are combined to $M$ segments where we assume that inside a segment all junctions behave identically. Most simulations are for $M = 20$. For not too high bath temperatures there is the appearence of a hot spot at high bias currents. In terms of electromagnetic properties, robust standing wave patterns appear in the current density and electric field distributions. These patterns come together with vortex/antivortex lines across the stack that correspond to $π$ kink states, discussed before in the literature for a homogeneous temperature distribution in the stack. We also discuss scaling of the thermal and electromagnetic properties with $M$, on the basis of simulations with $M$ between 10 and 350.

preprint2014arXiv

Design and experimental study of superconducting left-handed transmission lines with tunable dispersion and improved impedance match

We continue detailed study of microwave properties of a superconducting left-handed tunable CPW transmission line (LHTL). The line consists of a central conductor, loaded with series of Josephson junctions as fixed inductors; the line is shunted with SQUIDs as tunable inductors. The inductance of the SQUIDs is varied in the range of 0.08-0.5 nH by applying an external dc magnetic field. The circuit is designed to have left- and right-handed transmission bands separated by a variable rejection band. At zero magnetic field, we observed only one pass-band between 8 and 10 GHz within the frequency range of 8-12 GHz. The rejection band is anticipated to appear between 10 GHz and 11 GHz by design, and it has been detected in our previous work. To solve the problem of standing waves and RF leak in measurements of our experimental 20-cell LHTL, we have designed a high-ratio (5-50 Ohm) wideband (8-11 GHz) impedance transformer integrated at the chip, along with improved sample holder. The experimental data are compared with numerical simulations.

preprint2013arXiv

A one-dimensional tunable magnetic metamaterial

We present experimental data on a one-dimensional superconducting metamaterial that is tunable over a broad frequency band. The basic building block of this magnetic thin-film medium is a single-junction (rf-) superconducting quantum interference device (SQUID). Due to the nonlinear inductance of such an element, its resonance frequency is tunable in situ by applying a dc magnetic field. We demonstrate that this results in tunable effective parameters of our metamaterial consisting of 54 SQUIDs. In order to obtain the effective magnetic permeability from the measured data, we employ a technique that uses only the complex transmission coefficient S21.

preprint2013arXiv

Design and experimental study of superconducting left-handed transmission lines with tunable dispersion

We study microwave properties of a superconducting tunable coplanar waveguide (CPW). Pairs of Josephson junctions are forming superconducting quantum interference devices (SQUIDs), which shunt the central conductor of the CPW. The Josephson inductance of the SQUIDs is varied in the range of 0.08-0.5 nH by applying an external dc magnetic field. The central conductor of the CPW contains Josephson junctions connected in series that provide extra inductances; the magnetic field controlling the SQUIDs is weak enough not to influence the inductance of the chain of the single junctions. The circuit is designed to have left- and right-handed transmission properties separated by a variable rejection band; the band edges can be tuned by the magnetic field. We present transmission measurements on CPWs based on up to 120 Nb-AlOx-Nb Josephson junctions. At zero magnetic field, we observed no rejection band in the frequency range of 8-11 GHz. When applying the magnetic field, a rejection band between 7 GHz and 9 GHz appears. The experimental data are compared with numerical simulations.

preprint2013arXiv

Gaussianity revisited: Exploring the Kibble-Zurek mechanism with superconducting rings

In this paper we use spontaneous flux production in annular superconductors to shed light on the Kibble-Zurek scenario. In particular, we examine the effects of finite size and external fields, neither of which is directly amenable to the KZ analysis. Supported by 1D and 3D simulations, the properties of a superconducting ring are seen to be well represented by analytic Gaussian approximations which encode the KZ scales indirectly. Experimental results for annuli in the presence of external fields corroborate these findings.

preprint2013arXiv

Modeling the linewidth dependence of coherent terahertz emission from intrinsic Josephson junction stacks in the hot-spot regime

Recently it has been found that, when operated at large input power, the linewidth of terahertz radiation emitted from intrinsic Josephson junction stacks can be as narrow as some megahertz. In this high-bias regime a hot spot coexists with regions which are still superconducting. Surprisingly, the linewidth was found to decrease with increasing bath temperature. We present a simple model describing the dynamics of the stack in the presence of a hot spot by two parallel arrays of pointlike Josephson junctions and an additional shunt resistor in parallel. Heat diffusion is taken into account by thermally coupling all elements to a bath at temperature T_b. We present current-voltage characteristics of the coupled system and calculations of the linewidth of the radiation as a function of T_b. In the presence of a spatial gradient of the junction parameters critical current and resistance, the linewidth deceases with increasing T_b, similar to the experimental observation.

preprint2013arXiv

Protecting SQUID metamaterials against stray magnetic field

Using superconducting quantum interference devices (SQUIDs) as basic, low-loss elements of thin-film metamaterials has one main advantage: Their resonance frequency is easily tunable by applying a weak magnetic field. The downside, however, is a strong sensitivity to stray and inhomogeneous magnetic fields. In this work, we demonstrate that even small magnetic fields from electronic components destroy the collective, resonant behaviour of the SQUID metamaterial. We also show how the effect of these fields can be minimized. As a first step, magnetic shielding decreases any initially present fields including the earth's magnetic field. However, further measures like improvements in the sample geometry have to be taken to avoid the trapping of Abrikosov vortices.

preprint2013arXiv

Radiation power and linewidth of a semifluxon-based Josephson oscillator

We demonstrate a high-frequency generator operating at ~200GHz based on flipping a semifluxon in a Josephson junction of moderate normalized length. The semifluxon spontaneously appears at the $π$ discontinuity of the Josephson phase artificially created by means of two tiny current injectors. The radiation is detected by an on-chip detector (tunnel junction). The estimated radiation power (at the detector) is ~8nW and should be compared with the dc power of ~100nW consumed by the generator. The measured radiation linewidth, as low as 1.1MHz, is typical for geometrical (Fiske) resonances although we tried to suppress such resonances by placing well-matched microwave transformers at its both ends. Making use of a phase-locking feedback loop we are able to reduce the radiation linewidth to less than 1Hz measured relative to the reference oscillator and defined just by the resolution of our measurement setup.

preprint2013arXiv

Ultra-compact tunable split-ring resonators

We propose tunable superconducting split-ring resonators (SRRs) employing nonlinear Josephson inductance. A fraction of SRR is replaced by Nb-AlOx-Nb Josephson tunnel junctions connected in parallel and forming a superconducting quantum interference device (SQUID), whose inductance is sensitive to the external dc magnetic field. Due to the lumped nature of the Josephson inductance, the SRR can be made very compact and its resonance frequency can be tuned by applying magnetic field. We present the model, results of extensive EM-simulation and experimental data for the SRR weakly coupled to a transmission line within frequency range 11-13 GHz.

preprint2012arXiv

Unusual linewidth dependence of coherent THz emission measured from intrinsic Josephson junction stacks in the hot-spot regime

We report on measurements of the linewidth Δf of THz radiation emitted from intrinsic Josephson junction stacks, using a Nb/AlN/NbN integrated receiver for detection. Previous resolution limited measurements indicated that Δf may be below 1 GHz - much smaller than expected from a purely cavity-induced synchronization. While at low bias we found Δf to be not smaller than ? 500 MHz, at high bias, where a hotspot coexists with regions which are still superconducting, Δf turned out to be as narrow as 23 MHz. We attribute this to the hotspot acting as a synchronizing element. Δf decreases with increasing bath temperature, a behavior reminiscent of motional narrowing in NMR or ESR, but hard to explain in standard electrodynamic models of Josephson junctions.

preprint2010arXiv

Implementation of superconductor-ferromagnet-superconductor pi-shifters in superconducting digital and quantum circuits

The difference between the phases of superconducting order parameter plays in superconducting circuits the role similar to that played by the electrostatic potential difference required to drive a current in conventional circuits. This fundamental property can be altered by inserting in a superconducting circuit a particular type of weak link, the so-called Josephson $π$-junction having inverted current-phase relation and enabling a shift of the phase by $π$. We demonstrate the operation of three superconducting circuits -- two of them are classical and one quantum -- which all utilize such $π$-phase shifters realized using superconductor-ferromagnet-superconductor sandwich technology. The classical circuits are based on single-flux-quantum cells, which are shown to be scalable and compatible with conventional niobium-based superconducting electronics. The quantum circuit is a $π$-phase biased qubit, for which we observe coherent Rabi oscillations and compare the measured coherence time with that of conventional superconducting phase qubits.

preprint2009arXiv

$δ$-biased Josephson tunnel junctions

The behavior of a long Josephson tunnel junction drastically depends on the distribution of the dc bias current. We investigate the case in which the bias current is fed in the central point of a one-dimensional junction. Such junction configuration has been recently used to detect the persistent currents circulating in a superconducting loop. Analytical and numerical results indicate that the presence of fractional vortices leads to remarkable differences from the conventional case of uniformly distributed dc bias current. The theoretical findings are supported by detailed measurements on a number of $δ$-biased samples having different electrical and geometrical parameters.

preprint2009arXiv

A quantitative investigation of the effect of a close-fitting superconducting shield on the coil-factor of a solenoid

Superconducting shields are commonly used to suppress external magnetic interference. We show, that an error of almost an order of magnitude can occur in the coil-factor in realistic configurations of the solenoid and the shield. The reason is that the coil-factor is determined by not only the geometry of the solenoid, but also the nearby magnetic environment. This has important consequences for many cryogenic experiments involving magnetic fields such as the determination of the parameters of Josephson junctions, as well as other superconducting devices. It is proposed to solve the problem by inserting a thin sheet of high-permeability material, and the result numerically tested.

preprint2009arXiv

Spontaneous Fluxoid Formation in Superconducting Loops

We report on the first experimental verification of the Zurek-Kibble scenario in an isolated superconducting ring over a wide parameter range. The probability of creating a single flux quantum spontaneously during the fast normal-superconducting phase transition of a wide Nb loop clearly follows an allometric dependence on the quenching time $τ_{Q}$, as one would expect if the transition took place as fast as causality permits. However, the observed Zurek-Kibble scaling exponent $σ= 0.62\pm0.15$ is two times larger than anticipated for large loops. Assuming Gaussian winding number densities we show that this doubling is well-founded for small annuli.

preprint2009arXiv

Static Properties of Small Josephson Tunnel Junctions in an Oblique Magnetic Field

We have carried out a detailed experimental investigation of the static properties of planar Josephson tunnel junctions in presence of a uniform external magnetic field applied in an arbitrary orientation with respect to the barrier plane. We considered annular junctions, as well as rectangular junctions (having both overlap and cross-type geometries) with different barrier aspect ratios. It is shown how most of the experimental findings in an oblique field can be reproduced invoking the superposition principle to combine the classical behavior of electrically small junctions in an in-plane field together with the small junction behavior in a transverse field that we recently published [R. Monaco et al., J. Appl. Phys. vol 104, 023906 (2008)]. We explore the implications of these results in supposing systematic errors in previous experiments and in proposing new possible applications. We show that the presence of a transverse field may have important consequences, which could be either voluntarily exploited in applications or present an unwanted perturbation.

preprint2008arXiv

Static Properties of Small Josephson Tunnel Junctions in a Transverse Magnetic Field

The magnetic field distribution in the barrier of small planar Josephson tunnel junctions is numerically simulated in the case when an external magnetic field is applied perpendicular to the barrier plane. The simulations allow for heuristic analytical solutions for the Josephson static phase profile from which the dependence of the maximum Josephson current on the applied field amplitude is derived. The most common geometrical configurations are considered and, when possible, the theoretical findings are compared with the experimental data.

preprint2007arXiv

Planar Josephson Tunnel Junctions in a Transverse Magnetic Field

Traditionally, since the discovery of the Josephson effect in 1962, the magnetic diffraction pattern of planar Josephson tunnel junctions has been recorded with the field applied in the plane of the junction. Here we discuss the static junction properties in a transverse magnetic field where demagnetization effects imposed by the junction geometry and configuration of the electrodes are important. Measurements of the critical current versus magnetic field in planar Nb-based high-quality junctions with different geometry, size and critical current density show that it is advantageous to use a transverse magnetic field rather than an in-plane field to suppress the Josephson tunnel current and Fiske resonances in practical applications.

preprint2006arXiv

New Experiments for Spontaneous Vortex Formation in Josephson Tunnel Junctions

It has been argued by Zurek and Kibble that the likelihood of producing defects in a continuous phase transition depends in a characteristic way on the quench rate. In this paper we discuss an improved experiment for measuring the Zurek-Kibble scaling exponent $σ$ for the production of fluxons in annular symmetric Josephson Tunnel Junctions. We find $σ\simeq 0.5$. Further, we report accurate measurements of the junction gap voltage temperature dependence which allow for precise monitoring of the fast temperature variations during the quench.

preprint2006arXiv

Zurek-Kibble Mechanism for the Spontaneous Vortex Formation in $Nb-Al/Al_{ox}/Nb$ Josephson Tunnel Junctions: New Theory and Experiment

New scaling behavior has been both predicted and observed in the spontaneous production of fluxons in quenched $Nb-Al/Al_{ox}/Nb$ annular Josephson tunnel junctions as a function of the quench time, $τ_{Q}$. The probability $f_{1}$ to trap a single defect during the N-S phase transition clearly follows an allometric dependence on $τ_{Q}$ with a scaling exponent $σ= 0.5$, as predicted from the Zurek-Kibble mechanism for {\it realistic} JTJs formed by strongly coupled superconductors. This definitive experiment replaces one reported by us earlier, in which an idealised model was used that predicted $σ= 0.25$, commensurate with the then much poorer data. Our experiment remains the only condensed matter experiment to date to have measured a scaling exponent with any reliability.