Source author record

Thomas Meitzler

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

cond-mat.mes-hall cond-mat.other physics.optics

Catalog footprint

Research overview

3works

3topics

4close collaborators

Actions

Is this your work?

Open graph Browse papers

preprint2017arXiv

Low Power Microwave Signal Detection With a Spin-Torque Nano-Oscillator in the Active Self-Oscillating Regime

A spin-torque nano-oscillator (STNO) driven by a ramped bias current can perform spectrum analysis quickly over a wide frequency bandwidth. The STNO spectrum analyzer operates by injection locking to external microwave signals and produces an output DC voltage $V_{\rm dc}$ that temporally encodes the input spectrum. We found, via numerical analysis with a macrospin approximation, that an STNO is able to scan a $10~\rm GHz$ bandwidth in less than $100~\rm ns$ (scanning rate $R$ exceeds $100~\rm MHz/ns$ ). In contrast to conventional quadratic microwave detectors, the output voltage of the STNO analyzer is proportional to the amplitude of the input microwave signal $I_{\rm rf}$ with sensitivity $S = dV_{\rm dc}/dI_{\rm rf} \approx 750~\rm mV/mA$ . The minimum detectable signal of the analyzer depends on the scanning rate $R$ and, at low $R \approx 1~\rm MHz/ns$ , is about $1~\rm pW$ .

preprint2016arXiv

Interaction of microwave photons with nanostructured magnetic metasurfaces

A theoretical formalism for the description of the interaction of microwave photons with a thin (compared to the photon wavelength) magnetic metasurface comprised of dipolarly interacting nano-scale magnetic elements is developed. A scattering matrix describing the processes of photon transmission and reflection at the metasurface boundary is derived. As an example of the use of the developed formalism, it is demonstrated, that the introduction of a magnetic metasurface inside a microstrip electromagnetic waveguide quantitatively changes the dispersion relation of the fundamental waveguide mode, opening a non-propagation frequency band gap in the waveguide spectrum. The frequency position and the width of the band gap are dependent on the waveguide thickness, and can be controlled dynamically by switching the magnetic ground state of the metasurface. For sufficiently thin waveguides the position of the band gap is shifted from the resonance absorption frequency of the metasurface. In such a case, the magnetic metasurface inside a waveguide works as an efficient reflector, as the energy absorption in the metasurface is small, and most of the electromagnetic energy inside the non-propagation band gap is reflected.

preprint2011arXiv

Noise properties of a resonance-type spin-torque microwave detector

We analyze performance of a resonance-type spin-torque microwave detector (STMD) in the presence of noise and reveal two distinct regimes of STMD operation. In the first (high-frequency) regime the minimum detectable microwave power $P_{\rm min}$ is limited by the low-frequency Johnson-Nyquist noise and the signal-to-noise ratio (SNR) of STMD is proportional to the input microwave power $P_{\rm RF}$ . In the second (low-frequency) regime $P_{\rm min}$ is limited by the magnetic noise, and the SNR is proportional to $\sqrt{P_{\rm RF}}$ . The developed formalism can be used for the optimization of the practical noise-handling parameters of a STMD.

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.