Source author record

Sandip Bysakh

Sandip Bysakh appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

2works
2topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

2 published item(s)

preprint2020arXiv

Enhanced broad band photoresponse of a partially suspended horizontal array of Silicon microlines fabricated on Silicon-On-Insulator wafers

We report a high Responsivity broad band photo-detector working in the wavelength range 400 nm to 1100 nm in a horizontal array of Si microlines (line width ~1 micron) fabricated on a Silicon-on-Insulator (SOI) wafer. The array was made using a combination of plasma etching, wet etching and electron beam lithography. It forms a partially suspended (nearly free) Silicon microstructure on SOI. The array detector under full illumination of the device shows a peak Responsivity of 18 A/W at 800 nm, at a bias of 1V which is more than an order of magnitude of the Responsivity in a commercial Si detector. In a broad band of 400 nm to 1000 nm the Responsivity of the detector is in excess of 10A/W. We found that the suspension of the microlines in the array is necessary to obtain such high Responsivity. The suspension isolates the microlines from the bulk of the wafer and inhibits carrier recombination by the underlying oxide layer leading to enhanced photo-response. This has been validated through simulation. By using focused illumination of selected parts of a single microline of the array, we could isolate the contributions of the different parts of the microline to the photo-current.

preprint2020arXiv

Fabrication of Germanium-on-insulator in a Ge wafer with a crystalline Ge top layer and buried GeO2 layer by Oxygen ion implantation

The paper reports fabrication of Germanium-on-Insulator (GeOI) wafer by Oxygen ion implantation of an undoped single crystalline Ge wafer of orientation (100). Oxygen ions of energy 200 keV were implanted. The implanted wafer was subjected to Rapid Thermal Annealing to 650 C. The resulting wafer has a top crystalline Ge layer of 220 nm thickness and Buried Oxide layer (BOX) layer of good quality crystalline Germanium oxide with thickness around 0.62 micron. The crystalline BOX layer has hexagonal crystal structure with lattice constants close to the standard values. Raman Spectroscopy, cross-sectional HRTEM with SAED and EDS established that the top Ge layer was recrystallized during annealing with faceted crystallites. The top layer has a small tensile strain of around +0.4\% and has estimated dislocation density of 2.7 x 10^{7}cm^{-2}. The thickness, crystallinity and electrical characteristics of the top layer and the quality of the BOX layer of GeO_{2} are such that it can be utilized for device fabrication.