Source author record

Michel Versluis

Michel Versluis appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

13works
5topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

13 published item(s)

preprint2022arXiv

Super-Resolved Microbubble Localization in Single-Channel Ultrasound RF Signals Using Deep Learning

Recently, super-resolution ultrasound imaging with ultrasound localization microscopy (ULM) has received much attention. However, ULM relies on low concentrations of microbubbles in the blood vessels, ultimately resulting in long acquisition times. Here, we present an alternative super-resolution approach, based on direct deconvolution of single-channel ultrasound radio-frequency (RF) signals with a one-dimensional dilated convolutional neural network (CNN). This work focuses on low-frequency ultrasound (1.7 MHz) for deep imaging (10 cm) of a dense cloud of monodisperse microbubbles (up to 1000 microbubbles in the measurement volume, corresponding to an average echo overlap of 94%). Data are generated with a simulator that uses a large range of acoustic pressures (5-250 kPa) and captures the full, nonlinear response of resonant, lipid-coated microbubbles. The network is trained with a novel dual-loss function, which features elements of both a classification loss and a regression loss and improves the detection-localization characteristics of the output. Whereas imposing a localization tolerance of 0 yields poor detection metrics, imposing a localization tolerance corresponding to 4% of the wavelength yields a precision and recall of both 0.90. Furthermore, the detection improves with increasing acoustic pressure and deteriorates with increasing microbubble density. The potential of the presented approach to super-resolution ultrasound imaging is demonstrated with a delay-and-sum reconstruction with deconvolved element data. The resulting image shows an order-of-magnitude gain in axial resolution compared to a delay-and-sum reconstruction with unprocessed element data.

preprint2022arXiv

US Velocimetry in Participants with Aortoiliac Occlusive Disease

The accurate quantification of blood flow in aortoiliac arteries is challenging but clinically relevant because local flow patterns can influence atherosclerotic disease. To investigate the feasibility and clinical application of two-dimensional blood flow quantification using high-frame-rate contrast-enhanced US (HFR-CEUS) and particle image velocimetry (PIV), or US velocimetry, in participants with aortoiliac stenosis. In this prospective study, participants with a recently diagnosed aortoiliac stenosis underwent HFR-CEUS measurements of the pre- and poststenotic vessel segments. Two-dimensional quantification of blood flow was achieved by performing PIV analysis, which was based on pairwise cross-correlation of the HFR-CEUS images. Visual inspection of the entire data set was performed by five observers to evaluate the ability of the technique to enable adequate visualization of blood flow. The contrast-to-background ratio and average vector correlation were calculated. In two participants who showed flow disturbances, the flow complexity and vorticity were calculated. Results: 35 participants were included. Visual scoring showed that flow quantification was achieved in 41 of 42 locations. In 25 locations, one or multiple issues occurred that limited optimal flow quantification, including loss of correlation during systole, shadow regions, a short vessel segment in the image plane, and loss of contrast during diastole. In the remaining 16 locations, optimal quantification was achieved. The contrast-to-background ratio was higher during systole than during diastole, whereas the vector correlation was lower. Flow complexity and vorticity were high in regions with disturbed flow. Blood flow quantification with US velocimetry is feasible in patients with an aortoiliac stenosis, but several challenges must be overcome before implementation into clinical practice.

preprint2022arXiv

Vorticity-induced flow-focusing leads to bubble entrainment in an inkjet printhead: synchrotron X-ray and volume-of-fluid visualizations

The oscillatory flows present in an inkjet printhead can lead to strong deformations of the air-liquid interface at the nozzle exit. Such deformations may lead to an inward directed air jet with bubble pinch-off and the subsequent entrainment of an air bubble, which is highly detrimental to the stability of inkjet printing. Understanding the mechanisms of bubble entrainment is therefore crucial in improving print stability. In the present work, we use ultrafast X-ray phase-contrast imaging and direct numerical simulations based on the Volume-of-Fluid method to study the mechanisms underlying the bubble entrainment in a piezo-acoustic printhead. We first demonstrate good agreement between experiments and numerics. We then show the different classes of bubble pinch-off obtained in experiments, and that those were also captured numerically. The numerical results are then used to show that the baroclinic torque, which is generated at the gas-liquid interface due to the misalignment of density and pressure gradients, results in a flow-focusing effect that drives the formation of the air jet from which a bubble can pinch-off.

preprint2021arXiv

High-frequency acoustic droplet vaporization is initiated by resonance

Vaporization of low-boiling point droplets has numerous applications in combustion, process engineering and in recent years, in clinical medicine. However, the physical mechanisms governing the phase conversion are only partly explained. Here, we show that an acoustic resonance can arise from the large speed of sound mismatch between a perfluorocarbon microdroplet and its surroundings. The fundamental resonance mode obeys a unique relationship $kR$~$\sim$ 0.65 between droplet size and driving frequency that leads to a 3-fold pressure amplification inside the droplet. Classical nucleation theory shows that this pressure amplification increases the nucleation rate by several orders of magnitude. These findings are confirmed by high-speed imaging performed at a timescale of ten nanoseconds. The optical recordings demonstrate that droplets exposed to intense acoustic waves generated by inter-digital-transducers nucleate only if they match the theoretical resonance size.

preprint2020arXiv

Evaporation-Induced Crystallization of Surfactants in Sessile Multicomponent Droplets

Surfactants have been widely studied and used in controlling droplet evaporation. In this work, we observe and study the crystallization of sodium dodecyl sulfate (SDS) within an evaporating glycerol-water mixture droplet. The crystallization is induced by the preferential evaporation of water, which decreases the solubility of SDS in the mixture. As a consequence, the crystals shield the droplet surface and cease the evaporation. The universality of the evaporation characteristics for a range of droplet sizes is revealed by applying a diffusion model, extended by Raoult's law. To describe the nucleation and growth of the crystals, we employ the 2-dimensional crystallization model of Weinberg [J. Non-Cryst. Solids 1991, 134, 116]. The results of this model compare favorably to our experimental results. Our findings may inspire the community to reconsider the role of high concentration of surfactants in a multicomponent evaporation system.

preprint2020arXiv

Microuidics control the ballistic energy of thermocavitation liquid jets for needle-free injections

Illuminating a water solution with a focused continuous wave laser produces a strong local heating of the liquid that leads to the nucleation of bubbles, also known as thermocavitation. During the growth of the bubble, the surrounding liquid is expelled from the constraining microfluidic channel through a nozzle, creating a jet. The characteristics of the resulting liquid jet was imaged using ultra-fast imaging techniques. Here, we provide a phenomenological description of the jet shapes and velocities, and compare them with a Boundary Integral numerical model. We define the parameter regime, varying jet speed, taper geometry and liquid volume, for optimal printing, injection and spray applications. These results are important for the design of energy-efficient needle-free jet injectors based on microfluidic thermocavitation.

preprint2020arXiv

Rayleigh-Taylor instability by segregation in an evaporating multi-component microdroplet

The evaporation of multi-component droplets is relevant to various applications but challenging to study due to the complex physicochemical dynamics. Recently, Li (2018) reported evaporation-triggered segregation in 1,2-hexanediol-water binary droplets. In this present work, we added 0.5 wt% silicone oil into the 1,2-hexanediol-water binary solution. This minute silicone oil concentration dramatically modifies the evaporation process as it triggers an early extraction of the 1,2-hexanediol from the mixture. Surprisingly, we observe that the segregation of 1,2-hexanediol forms plumes, rising up from the rim of the sessile droplet towards the apex during the droplet evaporation. By orientating the droplet upside down, i.e., by studying a pendant droplet, the absence of the plumes indicates that the flow structure is induced by buoyancy, which drives a Rayleigh-Taylor instability (i.e., driven by density differences & gravitational acceleration). From micro-PIV measurement, we further prove that the segregation of the non-volatile component (1,2-hexanediol) hinders the evaporation near the contact line, which leads to a suppression of the Marangoni flow in this region. Hence, on long time scales, gravitational effects play the dominant role in the flow structure, rather than Marangoni flows. We compare the measurement of the evaporation rate with the diffusion model of Popov (2005), coupled with Raoult's law and the activity coefficient. This comparison indeed confirms that the silicone-oil-triggered segregation of the non-volatile 1,2-hexanediol significantly delays the evaporation. With an extended diffusion model, in which the influence of the segregation has been implemented, the evaporation can be well described.

preprint2012arXiv

Taming Acoustic Cavitation

In this fluid dynamics video we show acoustic cavitation occurring from pits etched on a silicon surface. By immersing the surface in a liquid, gas pockets are entrapped in the pits which upon ultrasonic insonation, are observed to shed cavitation bubbles. Modulating the driving pressure it is possible to induce different behaviours based on the force balance that determines the interaction among bubbles and the silicon surface. This system can be used for several applications like sonochemical water treatment, cleaning of surfaces with deposited materials such as biofilms.

preprint2011arXiv

Bubble size prediction in co-flowing streams

In this paper, the size of bubbles formed through the breakup of a gaseous jet in a co-axial microfluidic device is derived. The gaseous jet surrounded by a co-flowing liquid stream breaks up into monodisperse microbubbles and the size of the bubbles is determined by the radius of the inner gas jet and the bubble formation frequency. We obtain the radius of the gas jet by solving the Navier-Stokes equations for low Reynolds number flows and by minimization of the dissipation energy. The prediction of the bubble size is based on the system's control parameters only, i.e. the inner gas flow rate $Q_i$, the outer liquid flow rate $Q_o$, and the tube radius $R$. For a very low gas-to-liquid flow rate ratio ($Q_i / Q_o \rightarrow 0$) the bubble radius scales as $r_b / R \propto \sqrt{Q_i / Q_o}$, independently of the inner to outer viscosity ratio $η_i/η_o$ and of the type of the velocity profile in the gas, which can be either flat or parabolic, depending on whether high-molecular-weight surfactants cover the gas-liquid interface or not. However, in the case in which the gas velocity profiles are parabolic and the viscosity ratio is sufficiently low, i.e. $η_i/η_o \ll 1$, the bubble diameter scales as $r_b \propto (Q_i/Q_o)^β$, with $β$ smaller than 1/2.

preprint2011arXiv

Microbubble formation and pinch-off scaling exponent in flow-focusing devices

We investigate the gas jet breakup and the resulting microbubble formation in a microfluidic flow-focusing device using ultra high-speed imaging at 1 million frames/s. In recent experiments [Dollet et al., Phys. Rev. Lett. 100, 034504 (2008)] it was found that in the final stage of the collapse the radius of the neck scales with time with a 1/3 power-law exponent, which suggested that gas inertia and the Bernoulli suction effect become important. Here, ultra high-speed imaging was used to capture the complete bubble contour and quantify the gas flow through the neck. It revealed that the resulting decrease in pressure, due to Bernoulli suction, is too low to account for an accelerated pinch-off. The high temporal resolution images enable us to approach the final moment of pinch-off to within 1 μs. We observe that the final moment of bubble pinch-off is characterized by a scaling exponent of 0.41 +/- 0.01. This exponent is approximately 2/5, which can be derived, based on the observation that during the collapse the neck becomes less slender, due to the exclusive driving through liquid inertia.

preprint2010arXiv

Breakup of diminutive Rayleigh jets

Discharging a liquid from a nozzle at sufficient large velocity leads to a continuous jet that due to capillary forces breaks up into droplets. Here we investigate the formation of microdroplets from the breakup of micron-sized jets with ultra high-speed imaging. The diminutive size of the jet implies a fast breakup time scale $τ_\mathrm{c} = \sqrt{ρr^3 / γ}$ of the order of 100\,ns{}, and requires imaging at 14 million frames per second. We directly compare these experiments with a numerical lubrication approximation model that incorporates inertia, surface tension, and viscosity [Eggers and Dupont, J. Fluid Mech. 262, 205 (1994); Shi, Brenner, and Nagel, Science 265, 219 (1994)]. The lubrication model allows to efficiently explore the parameter space to investigate the effect of jet velocity and liquid viscosity on the formation of satellite droplets. In the phase diagram we identify regions where the formation of satellite droplets is suppressed. We compare the shape of the droplet at pinch-off between the lubrication approximation model and a boundary integral (BI) calculation, showing deviations at the final moment of the pinch-off. Inspite of this discrepancy, the results on pinch-off times and droplet and satellite droplet velocity obtained from the lubrication approximation agree with the high-speed imaging results.

preprint2009arXiv

Collapse of Non-Axisymmetric Cavities

A round disk with a harmonic disturbance impacts on a water surface and creates a non-axisymmetric cavity which collapses under the influence of hydrostatic pressure. We use disks deformed with mode m=2 to m=6. For all mode numbers we find clear evidence for a phase inversion of the cavity wall during the collapse. We present a fluid dynamics video showing high speed imaging of different modes, pointing out the characteristic features during collapse.

preprint2006arXiv

Leaping shampoo and the stable Kaye effect

Shear-thinning fluids exhibit surprisingly rich behaviour. One example is the Kaye effect which occurs when a thin stream of a solution of polyisobutylene in Decalin is poured into a dish of the fluid. As pouring proceeds, a small stream of liquid occasionally leaps upward from the heap. This surprising effect, which lasts only a second or so, is named after its first observer A. Kaye, who could offer no explanation for this behaviour. Later, Collyer and Fischer suggested from 250 frames per second cine recordings that the fluid must be highly shear thinning as well as elastic and 'pituitous'. In addition, they concluded that a rigid surface is required to back the reflected liquid stream. While the words bouncing and reflection are associated with non-continuous and elastic effects, we will show here that the Kaye effect is in fact a continuous flow phenomenon. We show that the Kaye effect works for many common fluids, including shampoos and liquid soaps. We reveal its physical mechanism (formation, stability and disruption) through high-speed imaging. The measurements are interpreted with a simple theoretical model including only the shear thinning behaviour of the liquid; elastic properties of the liquid play no role. We show that the Kaye effect can be stable and that it can be directed. We even demonstrate a stable Kaye effect on a thin soap film excluding the necessity of a rigid backing surface.