Source author record

Martin Treiber

Martin Treiber appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

24works
13topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

24 published item(s)

preprint2022arXiv

Vessel-following model for inland waterways based on deep reinforcement learning

While deep reinforcement learning (RL) has been increasingly applied in designing car-following models in the last years, this study aims at investigating the feasibility of RL-based vehicle-following for complex vehicle dynamics and strong environmental disturbances. As a use case, we developed an inland waterways vessel-following model based on realistic vessel dynamics, which considers environmental influences, such as varying stream velocity and river profile. We extracted natural vessel behavior from anonymized AIS data to formulate a reward function that reflects a realistic driving style next to comfortable and safe navigation. Aiming at high generalization capabilities, we propose an RL training environment that uses stochastic processes to model leading trajectory and river dynamics. To validate the trained model, we defined different scenarios that have not been seen in training, including realistic vessel-following on the Middle Rhine. Our model demonstrated safe and comfortable driving in all scenarios, proving excellent generalization abilities. Furthermore, traffic oscillations could effectively be dampened by deploying the trained model on a sequence of following vessels.

preprint2016arXiv

Calibrating the Local and Platoon Dynamics of Car-following Models on the Reconstructed NGSIM Data

The NGSIM trajectory data are used to calibrate two car-following models - the IDM and the FVDM. We used the I80 dataset which has already been reconstructed to eliminate outliers, unphysical data, and internal and platoon inconsistencies contained in the original data.We extract from the data leader-follower pairs and platoons of up to five consecutive vehicles thereby eliminating all trajectories that are too short or contain lane changes. Four error measures based on speed and gap deviations are considered. Furthermore, we apply three calibration methods: local or direct calibration, global calibration, and platoon calibration. The last approach means that a platoon of several vehicles following a data-driven leader is simulated and compared to the observed dynamics.

preprint2016arXiv

Common feature of concave growth pattern of oscillations in terms of speed, acceleration, fuel consumption and emission in car following: experiment and modeling

This paper has investigated the growth pattern of traffic oscillations by using vehicle trajectory data in a car following experiment. We measured the standard deviation of acceleration, emission and fuel consumption of each vehicle in the car-following platoon. We found that: (1) Similar to the standard deviation of speed, these indices exhibit a common feature of concave growth pattern along vehicles in the platoon; (2) The emission and fuel consumption of each vehicle decrease remarkably when the average speed of the platoon increases from low value; However, when reaches 30km/h, the change of emission and fuel consumption with is not so significant; (3), the correlations of emission and fuel consumption with both the standard deviation of acceleration and the speed oscillation are strong. Simulations show that with the memory effect of drivers taken into account, the improved two-dimensional intelligent driver model is able to reproduce the common feature of traffic oscillation evolution quite well.

preprint2016arXiv

Improved 2D Intelligent Driver Model simulating synchronized flow and evolution concavity in traffic flow

This paper firstly show that 2 Dimensional Intelligent Driver Model (Jiang et al., PloS one, 9(4), e94351, 2014) is not able to replicate the synchronized traffic flow. Then we propose an improved model by considering the difference between the driving behaviors at high speeds and that at low speeds. Simulations show that the improved model can reproduce the phase transition from synchronized flow to wide moving jams, the spatiotemporal patterns of traffic flow induced by traffic bottleneck, and the evolution concavity of traffic oscillations (i.e. the standard deviation of the velocities of vehicles increases in a concave/linear way along the platoon). Validating results show that the empirical time series of traffic speed obtained from Floating Car Data can be well simulated as well.

preprint2016arXiv

Measuring and Modelling Crowd Flows - Fusing Stationary and Tracking Data

The two main data categories of vehicular traffic flow, stationary detector data and floating-car data, are also available for many Marathons and other mass-sports events: Loop detectors and other stationary data sources find their counterpart in the RFID tags of the athletes recording the split times at several stations during the race. Additionally, more and more athletes use smart-phone apps generating track data points that are the equivalent of floating-car data. We present a methodology to detect congestions and estimate the location of jam-fronts, the delay times, and the spatio-temporal speed and density distribution of the athlete's crowd flow by fusing these two data sources based on a first-order macroscopic model with triangular fundamental diagram. The method can be used in real-time or for analyzing past events. Using synthetic "ground truth" data generated by simulations with the Intelligent-Driver Model, we show that, in a real-time application, the proposed algorithm is robust and effective with minimal data requirements. Generally, two stationary data sources and about ten "floating-athlete" trajectories per hour are sufficient.

preprint2015arXiv

Cellular automaton model simulating spatiotemporal patterns, phase transitions and evolution concavity in traffic flow

This paper firstly show that a recent model (Tian et al., Transpn. Res. B 71, 138-157, 2015) is not able to well replicate the evolution concavity in traffic flow, i.e. the standard deviation of vehicles increases in a concave/linear way along the platoon. Then we propose an improved model by introducing the safe speed, the logistic function of the randomization probability, and small randomization deceleration for low-speed vehicles into the model. Simulations show that the improved model can well reproduce the metastable states, the spatiotemporal patterns, the phase transition behaviors of traffic flow, and the evolution concavity of traffic oscillations. Validating results show that the empirical time series of traffic speed obtained from Floating Car Data can be well simulated as well.

preprint2015arXiv

Thresholds in choice behaviour and the size of travel time savings

Travel time savings are usually the most substantial economic benefit of transport infrastructure projects. However, questions surround whether small time savings are as valuable per unit as larger savings. Thresholds in individual choice behaviour are one reason cited for a discounted unit value for small time savings. We demonstrate different approaches for modelling these thresholds using synthetic and stated choice data. We show that the consideration of thresholds is important, even if the discounted unit value for small travel time savings is rejected for transport project appraisal. If an existing threshold is ignored in model estimation, the value of travel time savings will be biased. The presented procedure might also be useful to model thresholds in other contexts of choice behaviour.

preprint2014arXiv

Comparing Numerical Integration Schemes for Time-Continuous Car-Following Models

When simulating trajectories by integrating time-continuous car-following models, standard integration schemes such as the forth-order Runge-Kutta method (RK4) are rarely used while the simple Euler's method is popular among researchers. We compare four explicit methods: Euler's method, ballistic update, Heun's method (trapezoidal rule), and the standard forth-order RK4. As performance metrics, we plot the global discretization error as a function of the numerical complexity. We tested the methods on several time-continuous car-following models in several multi-vehicle simulation scenarios with and without discontinuities such as stops or a discontinuous behavior of an external leader. We find that the theoretical advantage of RK4 (consistency order~4) only plays a role if both the acceleration function of the model and the external data of the simulation scenario are sufficiently often differentiable. Otherwise, we obtain lower (and often fractional) consistency orders. Although, to our knowledge, Heun's method has never been used for integrating car-following models, it turns out to be the best scheme for many practical situations. The ballistic update always prevails Euler's method although both are of first order.

preprint2014arXiv

Crowd Flow Modeling of Athletes in Mass Sports Events -- a Macroscopic Approach

We propose a macroscopic model in form of a dispersion-transport equation for non-congested flow of the athletes which is coupled to a kinematic-wave model for congested flow. The model takes into account the performance (i.e., free-flow speed distributions) of the athletes in the different starting groups. The model is calibrated and validated on data of the German $\textit{Rennsteig Half Marathon 2012}$ and the Swedish $\textit{Vasaloppet 2012}$ cross-country ski race. Simulations of the model allow the event managers to improve the organization by determining the optimum number of starting groups, the maximum size of each group, whether a wave start with a certain starting delay between the groups is necessary, or what will be the effects of changing the course. We apply the model to simulate a planned course change for the Rennsteig Half Marathon 2013, and determine whether critical congestions are likely to occur.

preprint2014arXiv

From Behavioral Psychology to Acceleration Modeling: Calibration, Validation, and Exploration of Drivers Cognitive and Safety Parameters in a Risk-Taking Environment

We investigate a utility-based approach for driver car-following behavioral modeling while analyzing different aspects of the model characteristics especially in terms of capturing different fundamental diagram regions and safety proxy indices. The adopted model came from an elementary thought where drivers associate subjective utilities for accelerations (i.e. gain in travel times) and subjective dis-utilities for decelerations (i.e. loss in travel time) with a perceived probability of being involved in rear-end collision crashes. Following the testing of the model general structure, the authors translate the corresponding behavioral psychology theory - prospect theory - into an efficientmicroscopic traffic modeling with more elaborate stochastic characteristics considered in a risk-taking environment. The formulated model offers a better understanding of drivers behavior, particularly under extreme/incident conditions.

preprint2014arXiv

From Drivers to Athletes -- Modeling and Simulating Cross-Country Sking Marathons

Traffic flow of athletes in classic-style cross-country ski marathons, with the Swedish Vasaloppet as prominent example, represents a non-vehicular system of driven particles with many properties of vehicular traffic flow such as unidirectional movement, the existence of lanes, and, moreover, severe traffic jams. We propose a microscopic acceleration and track-changing model taking into account different fitness levels, gradients, and interactions between the athletes in all traffic situations. The model is calibrated on microscopic data of the $\textit{Vasaloppet 2012}$ Using the multi-model open-source simulator MovSim.org, we simulate all 15 000 participants of the Vasaloppet during the first ten kilometers.

preprint2014arXiv

Microscopic Calibration and Validation of Car-Following Models -- A Systematic Approach

Calibration and validation techniques are crucial in assessing the descriptive and predictive power of car-following models and their suitability for analyzing traffic flow. Using real and generated floating-car and trajectory data, we systematically investigate following aspects: Data requirements and preparation, conceptional approach including local maximum-likelihood and global LSE calibration with several objective functions, influence of the data sampling rate and measuring errors, the effect of data smoothing on the calibration result, and model performance in terms of fitting quality, robustness, parameter orthogonality, completeness and plausible parameter values.

preprint2014arXiv

Microscopic driving theory with non-hypothetical congested steady state: Model and Empirical verification

The essential distinction between the fundamental diagram approach and three-phase theory is the existence of the unique space-gap-speed relationship. In order to verify this relationship, empirical data are analyzed with the following findings: (1) linear relationship between the actual space gap and speed can be identified when the speed difference between vehicles approximates zero; (2) vehicles accelerate or decelerate around the desired space gap most of the time. To explain these phenomena, we propose that, in homogeneous congested traffic flow, the space gap between two vehicles will oscillate around the desired space gap in the noiseless limit. This assumption is formulated in terms of a cellular automaton. Simulations under periodic and open boundary conditions reproduce the empirical findings of three-phase theory. Finally, the model is calibrated and validated. All verification results are acceptable and better than that of previous studies.

preprint2014arXiv

Microscopic driving theory with oscillatory congested states: model and empirical verification

The essential distinction between the Fundamental Diagram Approach (FDA) and Kerner's Three- Phase Theory (KTPT) is the existence of a unique gap-speed (or flow-density) relationship in the former class. In order to verify this relationship, empirical data are analyzed with the following findings: (1) linear relationship between the actual space gap and speed can be identified when the speed difference between vehicles approximates zero; (2) vehicles accelerate or decelerate around the desired space gap most of the time. To explain these phenomena, we propose that, in congested traffic flow, the space gap between two vehicles will oscillate around the desired space gap in the deterministic limit. This assumption is formulated in terms of a cellular automaton. In contrast to FDA and KTPT, the new model does not have any congested steady-state solution. Simulations under periodic and open boundary conditions reproduce the empirical findings of KTPT. Calibrating and validating the model to detector data produces results that are better than that of previous studies.

preprint2014arXiv

Modelling supported driving as an optimal control cycle: Framework and model characteristics

Driver assistance systems support drivers in operating vehicles in a safe, comfortable and efficient way, and thus may induce changes in traffic flow characteristics. This paper puts forward a receding horizon control framework to model driver assistance and cooperative systems. The accelerations of automated vehicles are controlled to optimise a cost function, assuming other vehicles driving at stationary conditions over a prediction horizon. The flexibility of the framework is demonstrated with controller design of Adaptive Cruise Control (ACC) and Cooperative ACC (C-ACC) systems. The proposed ACC and C-ACC model characteristics are investigated analytically, with focus on equilibrium solutions and stability properties. The proposed ACC model produces plausible human car-following behaviour and is unconditionally locally stable. By careful tuning of parameters, the ACC model generates similar stability characteristics as human driver models. The proposed C-ACC model results in convective downstream and absolute string instability, but not convective upstream string instability observed in human-driven traffic and in the ACC model. The control framework and analytical results provide insights into the influences of ACC and C-ACC systems on traffic flow operations.

preprint2014arXiv

Simulation Study of a Traffic Light Assistant Based on Vehicle-Infrastructure Communication

Vehicle-infrastructure communication opens up new ways to improve traffic flow efficiency at signalized intersections. In this study, we assume that equipped vehicles can obtain information about switching times of relevant traffic lights in advance, and additionally counting data from upstream detectors. By means of simulation, we investigate, how equipped vehicles can make use of this information to improve traffic flow. Criteria include cycle-averaged capacity, driving comfort, fuel consumption, travel time, and the number of stops. Depending on the overall traffic demand and the penetration rate of equipped vehicles, we generally find several percent of improvement.

preprint2010arXiv

An Open-Source Microscopic Traffic Simulator

We present the interactive Java-based open-source traffic simulator available at www.traffic-simulation.de. In contrast to most closed-source commercial simulators, the focus is on investigating fundamental issues of traffic dynamics rather than simulating specific road networks. This includes testing theories for the spatiotemporal evolution of traffic jams, comparing and testing different microscopic traffic models, modeling the effects of driving styles and traffic rules on the efficiency and stability of traffic flow, and investigating novel ITS technologies such as adaptive cruise control, inter-vehicle and vehicle-infrastructure communication.

preprint2010arXiv

Calibration and validation of models describing the spatiotemporal evolution of congested traffic patterns

We propose a quantitative approach for calibrating and validating key features of traffic instabilities based on speed time series obtained from aggregated data of a series of neighboring stationary detectors. We apply the proposed criteria to historic traffic databases of several freeways in Germany containing about 400 occurrences of congestions thereby providing a reference for model calibration and quality assessment with respect to the spatiotemporal dynamics. First tests with microscopic and macroscopic models indicate that the criteria are both robust and discriminative, i.e., clearly distinguishes between models of higher and lower predictive power.

preprint2010arXiv

Connectivity statistics of store-and-forward inter-vehicle communication

Inter-vehicle communication (IVC) enables vehicles to exchange messages within a limited broadcast range and thus self-organize into dynamical vehicular ad hoc networks. For the foreseeable future, however, a direct connectivity between equipped vehicles in one direction is rarely possible. We therefore investigate an alternative mode in which messages are stored by relay vehicles traveling in the opposite direction, and forwarded to vehicles in the original direction at a later time. The wireless communication consists of two `transversal' message hops across driving directions. Since direct connectivity for transversal hops and a successful message transmission to vehicles in the destination region is only a matter of time, the quality of this IVC strategy can be described in terms of the distribution function for the total transmission time. Assuming a Poissonian distance distribution between equipped vehicles, we derive analytical probability distributions for message transmission times and related propagation speeds for a deterministic and a stochastic model of the maximum range of direct communication. By means of integrated microscopic simulations of communication and bi-directional traffic flows, we validated the theoretical expectation for multi-lane roadways. We found little deviation of the analytical result for multi-lane scenarios, but significant deviations for a single-lane. This can be explained by vehicle platooning. We demonstrate the efficiency of the transverse hopping mechanism for a congestion-warning application in a microscopic traffic simulation scenario. Messages are created on an event-driven basis by equipped vehicles entering and leaving a traffic jam. This application is operative for penetration levels as low as 1%.

preprint2010arXiv

Online traffic state estimation based on floating car data

Besides the traditional data collection by stationary detectors, recent advances in wireless and sensor technologies have promoted new potentials for a vehicle-based data collection and local dissemination of information. By means of microscopic traffic simulations we study the problem of online estimation of the current traffic situation based on floating car data. Our focus is on the estimation on the up- and downstream jam fronts determining the extension of traffic congestion. We study the impact of delayed information transmission by short-range communication via wireless LAN in contrast to instantaneous information transmission to the roadside units by means of mobile radio. The delayed information transmission leads to systematic estimation errors which cannot be compensated for by a higher percentage of probe vehicles. Additional flow measurements from stationary detectors allow for a model-based prediction which is effective for much lower floating car percentages than 1%.

preprint2010arXiv

Three-phase traffic theory and two-phase models with a fundamental diagram in the light of empirical stylized facts

Despite the availability of large empirical data sets and the long history of traffic modeling, the theory of traffic congestion on freeways is still highly controversial. In this contribution, we compare Kerner's three-phase traffic theory with the phase diagram approach for traffic models with a fundamental diagram. We discuss the inconsistent use of the term "traffic phase" and show that patterns demanded by three-phase traffic theory can be reproduced with simple two-phase models, if the model parameters are suitably specified and factors characteristic for real traffic flows are considered, such as effects of noise or heterogeneity or the actual freeway design (e.g. combinations of off- and on-ramps). Conversely, we demonstrate that models created to reproduce three-phase traffic theory create similar spatiotemporal traffic states and associated phase diagrams, no matter whether the parameters imply a fundamental diagram in equilibrium or non-unique flow- density relationships. In conclusion, there are different ways of reproducing the empirical stylized facts of spatiotemporal congestion patterns summarized in this contribution, and it appears possible to overcome the controversy by a more precise definition of the scientific terms and a more careful comparison of models and data, considering effects of the measurement process and the right level of detail in the traffic model used.

preprint2009arXiv

Enhanced Intelligent Driver Model to Access the Impact of Driving Strategies on Traffic Capacity

With an increasing number of vehicles equipped with adaptive cruise control (ACC), the impact of such vehicles on the collective dynamics of traffic flow becomes relevant. By means of simulation, we investigate the influence of variable percentages of ACC vehicles on traffic flow characteristics. For simulating the ACC vehicles, we propose a new car-following model that also serves as basis of an ACC implementation in real cars. The model is based on the Intelligent Driver Model [Treiber et al., Physical Review E 62, 1805 (2000)] and inherits its intuitive behavioural parameters: desired velocity, acceleration, comfortable deceleration, and desired minimum time headway. It eliminates, however, the sometimes unrealistic behaviour of the Intelligent Driver Model in cut-in situations with ensuing small gaps that regularly are caused by lane changes of other vehicles in dense or congested traffic. We simulate the influence of different ACC strategies on the maximum capacity before breakdown, and the (dynamic) bottleneck capacity after breakdown. With a suitable strategy, we find sensitivities of the order of 0.3, i.e., 1% more ACC vehicles will lead to an increase of the capacities by about 0.3%. This sensitivity multiplies when considering travel times at actual breakdowns.

preprint2009arXiv

Reconstructing the Traffic State by Fusion of Heterogeneous Data

We present an advanced interpolation method for estimating smooth spatiotemporal profiles for local highway traffic variables such as flow, speed and density. The method is based on stationary detector data as typically collected by traffic control centres, and may be augmented by floating car data or other traffic information. The resulting profiles display transitions between free and congested traffic in great detail, as well as fine structures such as stop-and-go waves. We establish the accuracy and robustness of the method and demonstrate three potential applications: 1. compensation for gaps in data caused by detector failure; 2. separation of noise from dynamic traffic information; and 3. the fusion of floating car data with stationary detector data.

preprint2008arXiv

Calibrating Car-Following Models using Trajectory Data: Methodological Study

The car-following behavior of individual drivers in real city traffic is studied on the basis of (publicly available) trajectory datasets recorded by a vehicle equipped with an radar sensor. By means of a nonlinear optimization procedure based on a genetic algorithm, we calibrate the Intelligent Driver Model and the Velocity Difference Model by minimizing the deviations between the observed driving dynamics and the simulated trajectory when following the same leading vehicle. The reliability and robustness of the nonlinear fits are assessed by applying different optimization criteria, i.e., different measures for the deviations between two trajectories. The obtained errors are in the range between~11% and~29% which is consistent with typical error ranges obtained in previous studies. In addition, we found that the calibrated parameter values of the Velocity Difference Model strongly depend on the optimization criterion, while the Intelligent Driver Model is more robust in this respect. By applying an explicit delay to the model input, we investigated the influence of a reaction time. Remarkably, we found a negligible influence of the reaction time indicating that drivers compensate for their reaction time by anticipation. Furthermore, the parameter sets calibrated to a certain trajectory are applied to the other trajectories allowing for model validation. The results indicate that ``intra-driver variability'' rather than ``inter-driver variability'' accounts for a large part of the calibration errors. The results are used to suggest some criteria towards a benchmarking of car-following models.