Source author record

Lin Cai

Lin Cai appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

astro-ph.IM eess.SP gr-qc physics.geo-ph Computer Vision eess.SY Graphics Networking and Internet Architecture physics.ins-det Systems and Control

Catalog footprint

What is connected

8works

10topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2023arXiv

For Intelligent and Higher Spectrum Efficiency: A Variable Packing Ratio Transmission System Based on Faster-than-Nyquist and Deep Learning

With the rapid development of various services in wireless communications, spectrum resource has become increasingly valuable. Faster than Nyquist (FTN) signaling, proposed in the 1970s, is a promising paradigm for improving spectrum utilization. This paper proposes intelligent variable-packing-ratio (VPR)-based transmissions for high spectrum efficiency (SE) and security, respectively. Aided by deep learning (DL)-based estimation, the proposed scheme for high SE can achieve a higher capacity with negligible modification to existing communication paradigms (e.g., spectrum allocation or frame structure). Also, for VPR-based secure transmission, a dynamic generation scheme is proposed to produce randomly distributed positions to switch the packing ratio, which can effectively avoid detections and attacks. In addition, we propose a simplified DL-based packing ratio estimation for both of these two scenarios so that the receiver can estimate the packing ratio without any in-band or out-band control messages. Simulation results show that the proposed simplified estimation achieves nearly the same accuracy and convergence speed as the original multi-branch fully-connected structure with a complexity reduction of 20 folds. Finally, we derive the closed-form SE of the proposed VPR transmission under different channels. The numerical results validate the correctness of the derivation and demonstrate the SE gains of the VPR scheme beyond conventional Nyquist transmission.

preprint2022arXiv

I Can Read Your Mind: Control Mechanism Secrecy of Networked Dynamical Systems under Inference Attacks

Recent years have witnessed the fast advance of security research for networked dynamical system (NDS). Considering the latest inference attacks that enable stealthy and precise attacks into NDSs with observation-based learning, this article focuses on a new security aspect, i.e., how to protect control mechanism secrets from inference attacks, including state information, interaction structure and control laws. We call this security property as control mechanism secrecy, which provides protection of the vulnerabilities in the control process and fills the defense gap that traditional cyber security cannot handle. Since the knowledge of control mechanism defines the capabilities to implement attacks, ensuring control mechanism secrecy needs to go beyond the conventional data privacy to cover both transmissible data and intrinsic models in NDSs. The prime goal of this article is to summarize recent results of both inference attacks on control mechanism secrets and countermeasures. We first introduce the basic inference attack methods on the state and structure of NDSs, respectively, along with their inference performance bounds. Then, the corresponding countermeasures and performance metrics are given to illustrate how to preserve the control mechanism secrecy. Necessary conditions are derived to guide the secrecy design. Finally, thorough discussions on the control laws and open issues are presented, beckoning future investigation on reliable countermeasure design and tradeoffs between the secrecy and control performance.

preprint2021arXiv

3D Face From X: Learning Face Shape from Diverse Sources

We present a novel method to jointly learn a 3D face parametric model and 3D face reconstruction from diverse sources. Previous methods usually learn 3D face modeling from one kind of source, such as scanned data or in-the-wild images. Although 3D scanned data contain accurate geometric information of face shapes, the capture system is expensive and such datasets usually contain a small number of subjects. On the other hand, in-the-wild face images are easily obtained and there are a large number of facial images. However, facial images do not contain explicit geometric information. In this paper, we propose a method to learn a unified face model from diverse sources. Besides scanned face data and face images, we also utilize a large number of RGB-D images captured with an iPhone X to bridge the gap between the two sources. Experimental results demonstrate that with training data from more sources, we can learn a more powerful face model.

preprint2020arXiv

The First Round Result from the TianQin-1 Satellite

The TianQin-1 satellite (TQ-1), which is the first technology demonstration satellite for the TianQin project, was launched on 20 December 2019. The first round of experiment had been carried out from 21 December 2019 until 1 April 2020. The residual acceleration of the satellite is found to be about $1\times10^{-10}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$ and about $5\times10^{-11}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.05~{\rm Hz}\,$, measured by an inertial sensor with a sensitivity of $5\times10^{-12}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$. The micro-Newton thrusters has demonstrated a thrust resolution of $0.1~μ{\rm N}$ and a thrust noise of $0.3~μ{\rm N}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}$. The residual noise of the satellite with drag-free control is $3\times10^{-9}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$. The noise level of the optical readout system is about $30~{\rm pm}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$. The temperature stability at temperature monitoring position is controlled to be about $\pm3~{\rm mK}$ per orbit, and the mismatch between the center-of-mass of the satellite and that of the test mass is measured with a precision of better than $0.1~{\rm mm}$.

preprint2020arXiv

The TianQin project: current progress on science and technology

TianQin is a planned space-based gravitational wave (GW) observatory consisting of three earth orbiting satellites with an orbital radius of about $10^5~{\rm km}$. The satellites will form a equilateral triangle constellation the plane of which is nearly perpendicular to the ecliptic plane. TianQin aims to detect GWs between $10^{-4}~{\rm Hz}$ and $1~{\rm Hz}$ that can be generated by a wide variety of important astrophysical and cosmological sources, including the inspiral of Galactic ultra-compact binaries, the inspiral of stellar-mass black hole binaries, extreme mass ratio inspirals, the merger of massive black hole binaries, and possibly the energetic processes in the very early universe or exotic sources such as cosmic strings. In order to start science operations around 2035, a roadmap called the 0123 plan is being used to bring the key technologies of TianQin to maturity, supported by the construction of a series of research facilities on the ground. Two major projects of the 0123 plan are being carried out. In this process, the team has created a new generation $17~{\rm cm}$ single-body hollow corner-cube retro-reflector which has been launched with the QueQiao satellite on 21 May 2018; a new laser ranging station equipped with a $1.2~{\rm m}$ telescope has been constructed and the station has successfully ranged to all the five retro-reflectors on the Moon; and the TianQin-1 experimental satellite has been launched on 20 December 2019 and the first round result shows that the satellite has exceeded all of its mission requirements.

preprint2016arXiv

An analytical method for error analysis of GRACE-like missions based on spectral analysis

The aim of this paper is to present an analytical relationship between the power spectral density of GRACE-like mission measurements and the accuracies of the gravity field coefficients mainly from the point of view of theory of signal and system, which indicates the one-to-one correspondence between spherical harmonic error degree variances and frequencies of the measurement noise. In order to establish this relationship, the average power of the errors due to gravitational acceleration difference and the relationship between perturbing forces and range-rate perturbations are derived, based on the orthogonality property of associated Legendre functions and the linear orbit perturbation theory, respectively. This method provides a physical insight into the relation between mission parameters and scientific requirements. By taking GRACE-FO as the object of research, the effects of sensor noises and time variable gravity signals are analyzed. If LRI measurements are applied, a mission goal with a geoid accuracy of 7.4 cm at a spatial resolution of 101 km is reachable, whereas if the KBR measurement error model is applied, a mission goal with a geoid accuracy of 10.2 cm at a spatial resolution of 125 km is reachable. Based on the discussion of the spectral matching of instrument accuracies, an improvement in accuracy of accelerometers is necessary for the match between the range errors and accelerometer noises in the future mission. Temporal aliasing caused by the time variable gravity signals is also discussed by this method.

preprint2014arXiv

A Geometrical-Based Throughput Bound Analysis for Device-to-Device Communications in Cellular Networks

Device-to-device (D2D) communications in cellular networks are promising technologies for improving network throughput, spectrum efficiency, and transmission delay. In this paper, we first introduce the concept of guard distance to explore a proper system model for enabling multiple concurrent D2D pairs in the same cell. Considering the Signal to Interference Ratio (SIR) requirements for both macro-cell and D2D communications, a geometrical method is proposed to obtain the guard distances from a D2D user equipment (DUE) to the base station (BS), to the transmitting cellular user equipment (CUE), and to other communicating D2D pairs, respectively, when the uplink resource is reused. By utilizing the guard distances, we then derive the bounds of the maximum throughput improvement provided by D2D communications in a cell. Extensive simulations are conducted to demonstrate the impact of different parameters on the optimal maximum throughput. We believe that the obtained results can provide useful guidelines for the deployment of future cellular networks with underlaying D2D communications.

preprint2012arXiv

Error analysis for satellite gravity field determination based on two-dimensional Fourier methods

The time-wise and space-wise approaches are generally applied to data processing and error analysis for satellite gravimetry missions. But both the approaches, which are based on least-squares collocation, address the whole effect of measurement errors and estimate the resolution of gravity field models mainly from a numerical point of indirect view. Moreover, requirement for higher accuracy and resolution gravity field models could make the computation more difficult, and serious numerical instabilities arise. In order to overcome the problems, this study focuses on constructing a direct relationship between power spectral density of the satellite gravimetry measurements and coefficients of the Earth's gravity potential. Based on two-dimensional Fourier transform, the relationship is analytically concluded. By taking advantage of the analytical expression, it is efficient and distinct for parameter estimation and error analysis of missions. From the relationship and the simulations, it is analytically confirmed that the low-frequency noise affects the gravity field recovery in all degrees for the instance of satellite gradiometer recovery mission. Furthermore, some other results and suggestions are also described.