Source author record

Julien Lozi

Julien Lozi appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

32works
5topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

32 published item(s)

preprint2024arXiv

Testing magnetospheric accretion as an H$α$ emission mechanism of embedded giant planets: The case study for the disk exhibiting meridional flow around HD 163296

Recent high-sensitivity observations reveal that accreting giant planets embedded in their parental circumstellar disks can emit H$α$ at their final formation stages. While the origin of such emission is not determined yet, magnetospheric accretion is currently a most plausible hypothesis. In order to test this hypothesis further, we develop a simplified, but physical-based model and apply it to our observations taken toward HD 163296 with Subaru/SCExAO+VAMPIRES. We specify under what conditions, embedded giant planets can undergo magnetospheric accretion and emit hydrogen lines. We find that when stellar accretion rates are high, magnetospheric accretion becomes energetic enough to self-regulate the resulting emission. On the other hand, if massive planets are embedded in disks with low accretion rates, earlier formation histories determine whether magnetospheric accretion occurs. We explore two different origins of hydrogen emission lines (magnetospheric accretion flow heated by accretion-related processes vs planetary surfaces via accretion shock). The corresponding relationships between the accretion and line luminosities dictate that emission from accretion flow achieves higher line flux than that from accretion shock and the flux decreases with increasing wavelengths (i.e., from H$α$ to Pa$β$ and up to Br$γ$). Our observations do not detect any point-like source emitting H$α$ and are used to derive the 5$σ$ detection limit. The observations are therefore not sensitive enough, and reliable examination of our model becomes possible if observational sensitivity will be improved by a factor of ten or more. Multi-band observations increase the possibility of efficiently detecting embedded giant planets and carefully determining the origin of hydrogen emission lines.

preprint2022arXiv

A Visible-light Lyot Coronagraph for SCExAO/VAMPIRES

We describe the design and initial results from a visible-light Lyot coronagraph for SCExAO/VAMPIRES. The coronagraph is comprised of four hard-edged, partially transmissive focal plane masks with inner working angles of 36 mas, 55 mas, 92 mas, and 129 mas, respectively. The Lyot stop is a reflective, undersized design with a geometric throughput of 65.7%. Our preliminary on-sky contrast is 1e-2 at 0.1" to 1e-4 at 0.75" for all mask sizes. The coronagraph was deployed in early 2022 and is available for open use.

preprint2022arXiv

Astrometric Accelerations as Dynamical Beacons: Discovery and Characterization of HIP 21152 B, the First T-Dwarf Companion in the Hyades

Benchmark brown dwarf companions with well-determined ages and model-independent masses are powerful tools to test substellar evolutionary models and probe the formation of giant planets and brown dwarfs. Here, we report the independent discovery of HIP~21152~B, the first imaged brown dwarf companion in the Hyades, and conduct a comprehensive orbital and atmospheric characterization of the system. HIP~21152 was targeted in an ongoing high-contrast imaging campaign of stars exhibiting proper motion changes between Hipparcos and Gaia, and was also recently identified by Bonavita et al. (2022) and Kuzuhara et al. (2022). Our Keck/NIRC2 and SCExAO/CHARIS imaging of HIP~21152 revealed a comoving companion at a separation of $0.37^{\prime\prime}$ (16 au). We perform a joint orbit fit of all available relative astrometry and radial velocities together with the Hipparcos-Gaia proper motions, yielding a dynamical mass of $24^{+6}_{-4}\,\mathrm{M_{Jup}}$, which is $1{-}2σ$ lower than evolutionary model predictions. Hybrid grids that include the evolution of cloud properties best reproduce the dynamical mass. We also identify a comoving wide-separation ($1837^{\prime\prime}$ or $7.9 \times 10^4 \, \mathrm{au}$) early-L dwarf with an inferred mass near the hydrogen-burning limit. Finally, we analyze the spectra and photometry of HIP~21152~B using the Saumon & Marley (2008) atmospheric models and a suite of retrievals. The best-fit grid-based models have $f_{\mathrm{sed}}=2$, indicating the presence of clouds, $T_{\mathrm{eff}}=1400 \, \mathrm{K}$, and $\log{g}=4.5 \, \mathrm{dex}$. These results are consistent with the object's spectral type of $\mathrm{T0\pm1}$. As the first benchmark brown dwarf companion in the Hyades, HIP~21152~B joins the small but growing number of substellar companions with well-determined ages and dynamical masses.

preprint2022arXiv

Controlling petals using fringes: discontinuous wavefront sensing through sparse aperture interferometry at Subaru/SCExAO

Low wind and petaling effects, caused by the discontinuous apertures of telescopes, are poorly corrected -- if at all -- by commonly used workhorse wavefront sensors (WFSs). Wavefront petaling breaks the coherence of the point spread function core, splitting it into several side lobes, dramatically shutting off scientific throughput. We demonstrate the re-purposing of non-redundant sparse aperture masking (SAM) interferometers into low-order WFSs complementing the high-order pyramid WFS, on the SCExAO experimental platform at Subaru Telescope. The SAM far-field interferograms formed from a 7-hole mask are used for direct retrieval of petaling aberrations, which are almost invisible to the main AO loop. We implement a visible light dual-band SAM mode, using two disjoint 25 nm wide channels, that we recombine to overcome the one-lambda ambiguity of fringe-tracking techniques. This enables a control over petaling with sufficient capture range yet without conflicting with coronagraphic modes in the near-infrared. We present on-sky engineering results demonstrating that the design is able to measure petaling well beyond the range of a single-wavelength equivalent design.

preprint2022arXiv

Direct Imaging Discovery and Dynamical Mass of a Substellar Companion Orbiting an Accelerating Hyades Sun-like Star with SCExAO/CHARIS

We present the direct-imaging discovery of a substellar companion in orbit around a Sun-like star member of the Hyades open cluster. So far, no other substellar companions have been unambiguously confirmed via direct imaging around main-sequence stars in Hyades. The star HIP 21152 is an accelerating star as identified by the astrometry from the Gaia and Hipparcos satellites. We have detected the companion, HIP 21152 B, in multi-epoch using the high-contrast imaging from SCExAO/CHARIS and Keck/NIRC2. We have also obtained the stellar radial-velocity data from the Okayama 188cm telescope. The CHARIS spectroscopy reveals that HIP 21152 B's spectrum is consistent with the L/T transition, best fit by an early T dwarf. Our orbit modeling determines the semi-major axis and the dynamical mass of HIP 21152 B to be 17.5$^{+7.2}_{-3.8}$ au and 27.8$^{+8.4}_{-5.4}$ $M_{\rm{Jup}}$, respectively. The mass ratio of HIP 21152 B relative to its host is $\approx$2\%, near the planet/brown dwarf boundary suggested from recent surveys. Mass estimates inferred from luminosity evolution models are slightly higher (33--42 $M_{\rm{Jup}}$). With a dynamical mass and a well-constrained age due to the system's Hyades membership, HIP 21152 B will become a critical benchmark in understanding the formation, evolution, and atmosphere of a substellar object as a function of mass and age. Our discovery is yet another key proof-of-concept for using precision astrometry to select direct imaging targets.

preprint2022arXiv

High Contrast and High Angular Imaging at Subaru Telescope

Adaptive Optics projects at Subaru Telescope span a wide field of capabilities ranging from ground-layer adaptive optics (GLAO) providing partial correction over a 20 arcmin FOV to extreme adaptive optics (ExAO) for exoplanet imaging. We describe in this paper current and upcoming narrow field-of-view capabilities provided by the Subaru Extreme Adaptive Optics Adaptive Optics (SCExAO) system and its instrument modules, as well as the upcoming 3000-actuator upgrade of the Nasmyth AO system.

preprint2022arXiv

High Contrast Imaging at the Photon Noise Limit with WFS-based PSF Calibration

Speckle Noise is the dominant source of error in high contrast imaging with adaptive optics system. We discuss the potential for wavefront sensing telemetry to calibrate speckle noise with sufficient precision and accuracy so that it can be removed in post-processing of science images acquired by high contrast imaging instruments. In such a self-calibrating system, exoplanet detection would be limited by photon noise and be significantly more robust and efficient than in current systems. We show initial laboratory and on-sky tests, demonstrating over short timescale that residual speckle noise is indeed calibrated to an accuracy exceeding readout and photon noise in the high contrast region. We discuss immplications for the design of space and ground high-contrast imaging systems.

preprint2022arXiv

Images of Embedded Jovian Planet Formation At A Wide Separation Around AB Aurigae

Direct images of protoplanets embedded in disks around infant stars provide the key to understanding the formation of gas giant planets like Jupiter. Using the Subaru Telescope and Hubble Space Telescope, we find evidence for a jovian protoplanet around AB Aurigae orbiting at a wide projected separation (93 au), likely responsible for multiple planet-induced features in the disk. Its emission is reproducible as reprocessed radiation from an embedded protoplanet. We also identify two structures located at 430-580 au that are candidate sites of planet formation. These data reveal planet formation in the embedded phase and a protoplanet discovery at wide, > 50 au separations characteristic of most imaged exoplanets. With at least one clump-like protoplanet and multiple spiral arms, the AB Aur system may also provide the evidence for a long-considered alternative to the canonical model for Jupiter's formation: disk (gravitational) instability.

preprint2022arXiv

Monitoring inner regions in the RY Tau jet

We present multi-epoch observations of the RY~Tau jet for H$α$ and [\ion{Fe}{2}] 1.644 \micron~emission lines obtained with Subaru/SCExAO+VAMPIRES, Gemini/NIFS, and Keck/OSIRIS in 2019--2021. These data show a series of four knots within 1$\arcsec$ consistent with the proper motion of $\sim$0\farcs3~yr$^{-1}$, analogous to the jets associated with another few active T-Tauri stars. However, the spatial intervals between the knots suggest the time intervals of the ejections of about 1.2, 0.7, and 0.7 years, significantly shorter than those estimated for the other stars. These H$α$ images contrast with the archival VLT/SPHERE/ZIMPOL observations from 2015, which showed only a single knot-like feature at $\sim0\farcs25$. The difference between the 2015 and 2019--2021 epochs suggests an irregular ejection interval within the six-year range. Such variations of the jet ejection may be related to a short-term ($<$1 year) variability of the mass accretion rate. We compared the peaks of the H$α$ emissions with the ZIMPOL data taken in 2015, showing the brighter profile at the base ($<0\farcs3$) than the 2020--2021 VAMPIRES profiles due to time-variable mass ejection rates or the heating-cooling balance in the jet. The observed jet knot structures may be alternatively attributed to stationary shocks, but a higher angular resolution is required to confirm its detailed origin.

preprint2021arXiv

An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru

In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.

preprint2021arXiv

On-sky validation of image-based adaptive optics wavefront sensor referencing

Differentiating between an exoplanet signal and residual speckle noise is a key challenge in high-contrast imaging. Speckles are due to a combination of fast, slow and static wavefront aberrations introduced by atmospheric turbulence and instrument optics. While wavefront control techniques developed over the last decade have shown promise in minimizing fast atmospheric residuals, slow and static aberrations such as non-common path aberrations (NCPAs) remain a key limiting factor for exoplanet detection. NCPA are not seen by the wavefront sensor (WFS) of the adaptive optics (AO) loop, hence the difficulty in correcting them. We propose to improve the identification and rejection of those aberrations. The algorithm DrWHO, performs frequent compensation of static and quasi-static aberrations to boost image contrast. By changing the WFS reference at every iteration of the algorithm, DrWHO changes the AO point of convergence to lead it towards a compensation of the static and slow aberrations. References are calculated using an iterative lucky-imaging approach, where each iteration updates the WFS reference, ultimately favoring high-quality focal plane images. We validate this concept through numerical simulations and on-sky testing on the SCExAO instrument at the 8.2-m Subaru telescope. Simulations show a rapid convergence towards the correction of 82% of the NCPAs. On-sky tests are performed over a 10-minute run in the visible (750 nm). We introduce a flux concentration (FC) metric to quantify the point spread function (PSF) quality and measure a 15.7% improvement. The DrWHO algorithm is a robust focal-plane wavefront sensing calibration method that has been successfully demonstrated on sky. It does not rely on a model nor requires wavefront sensor calibration or linearity. It is compatible with different wavefront control methods, and can be further optimized for speed and efficiency.

preprint2020arXiv

Angular differential kernel phases

To reach its optimal performance, Fizeau interferometry requires that we work to resolve instrumental biases through calibration. One common technique used in high contrast imaging is angular differential imaging, which calibrates the point spread function and flux leakage using a rotation in the focal plane. Our aim is to experimentally demonstrate and validate the efficacy of an angular differential kernel-phase approach, a new method for self-calibrating interferometric observables that operates similarly to angular differential imaging, while retaining their statistical properties. We used linear algebra to construct new observables that evolve outside of the subspace spanned by static biases. On-sky observations of a binary star with the SCExAO instrument at the Subaru telescope were used to demonstrate the practicality of this technique. We used a classical approach on the same data to compare the effectiveness of this method. The proposed method shows smaller and more Gaussian residuals compared to classical calibration methods, while retaining compatibility with the statistical tools available. We also provide a measurement of the stability of the SCExAO instrument that is relevant to the application of the technique. Angular differential kernel phases provide a reliable method for calibrating biased observables. Although the sensitivity at small separations is reduced for small field rotations, the calibration is effectively improved and the number of subjective choices is reduced.

preprint2020arXiv

Laboratory Demonstration of Spatial Linear Dark Field Control For Imaging Extrasolar Planets in Reflected Light

Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts ($\sim$ 5$\times$10$^{-7}$) and separations (1.5--5.2 $λ$/D) needed to image jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2--1.7) and maintains a dark hole whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2--5 more iterations and 20--50 DM commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining dark holes without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.

preprint2020arXiv

On the Chemical Abundance of HR 8799 and the Planet c

Comparing chemical abundances of a planet and the host star reveals the origin and formation path. Stellar abundance is measured with high-resolution spectroscopy. Planet abundance, on the other hand, is usually inferred from low-resolution data. For directly imaged exoplanets, the data are available from a slew of high-contrast imaging/spectroscopy instruments. Here, we study the chemical abundance of HR 8799 and its planet c. We measure stellar abundance using LBT/PEPSI (R=120,000) and archival HARPS data: stellar [C/H], [O/H], and C/O are 0.11$\pm$0.12, 0.12$\pm$0.14, and 0.54$^{+0.12}_{-0.09}$, all consistent with solar values. We conduct atmospheric retrieval using newly obtained Subaru/CHARIS data together with archival Gemini/GPI and Keck/OSIRIS data. We model the planet spectrum with petitRADTRANS and conduct retrieval using PyMultiNest. Retrieved planetary abundance can vary by $\sim$0.5 dex, from sub-stellar to stellar C and O abundances. The variation depends on whether strong priors are chosen to ensure a reasonable planet mass. Moreover, comparison with previous works also reveals inconsistency in abundance measurements. We discuss potential issues that can cause the inconsistency, e.g., systematics in individual data sets and different assumptions in the physics and chemistry in retrieval. We conclude that no robust retrieval can be obtained unless the issues are fully resolved.

preprint2020arXiv

On-sky verification of Fast and Furious focal-plane wavefront sensing: Moving forward toward controlling the island effect at Subaru/SCExAO

High-contrast imaging (HCI) observations of exoplanets can be limited by the island effect (IE). On the current generation of telescopes, the IE becomes a severe problem when the ground wind speed is below a few meters per second. This is referred to as the low-wind effect (LWE). The LWE severely distorts the point spread function (PSF), significantly lowering the Strehl ratio and degrading the contrast. In this article, we aim to show that the focal-plane wavefront sensing (FPWFS) algorithm, Fast and Furious (F&F), can be used to measure and correct the IE/LWE. We deployed the algorithm on the SCExAO HCI instrument at the Subaru Telescope using the internal near-infrared camera in H-band. We tested F&F with the internal source, and it was deployed on-sky to test its performance with the full end-to-end system and atmospheric turbulence. The performance of the algorithm was evaluated by two metrics based on the PSF quality: 1) the Strehl ratio approximation ($SRA$), and 2) variance of the normalized first Airy ring ($VAR$). Random LWE phase screens with a peak-to-valley wavefront error between 0.4 $μ$m and 2 $μ$m were all corrected to a $SRA$ $>$90\% and an $VAR\lessapprox0.05$. Furthermore, the on-sky results show that F&F is able to improve the PSF quality during very challenging atmospheric conditions (1.3-1.4'' seeing at 500 nm). Closed-loop tests show that F&F is able to improve the $VAR$ from 0.27 to 0.03 and therefore significantly improve the symmetry of the PSF. Simultaneous observations of the PSF in the {optical} ($λ= $ 750 nm, $Δλ=$ 50 nm) show that during these tests we were correcting aberrations common to the optical and NIR paths within SCExAO. Going forward, the algorithm is suitable for incorporation into observing modes, which will enable PSFs of higher quality and stability during science observations.

preprint2020arXiv

SCExAO/CHARIS High-Contrast Imaging of Spirals and Darkening Features in the HD 34700 A Protoplanetary Disk

We present Subaru/SCExAO+CHARIS broadband ($JHK$-band) integral field spectroscopy of HD 34700 A. CHARIS data recover HD 34700 A's disk ring and confirm multiple spirals discovered in Monnier et al. (2019). We set limits on substellar companions of $\sim12\ M_{\rm Jup}$ at $0\farcs3$ (in the ring gap) and $\sim5\ M_{\rm Jup}$ at $0\farcs75$ (outside the ring). The data reveal darkening effects on the ring and spiral, although we do not identify the origin of each feature such as shadows or physical features related to the outer spirals. Geometric albedoes converted from the surface brightness suggests a higher scale height and/or prominently abundant sub-micron dust at position angle between $\sim45^\circ$ and $90^\circ$. Spiral fitting resulted in very large pitch angles ($\sim30-50^\circ$) and a stellar flyby of HD 34700 B or infall from a possible envelope is perhaps a reasonable scenario to explain the large pitch angles.

preprint2020arXiv

SCExAO/CHARIS Near-IR Integral Field Spectroscopy of the HD 15115 Debris Disk

We present new, near-infrared ($1.1 - 2.4$ $μm$) high-contrast imaging of the debris disk around HD 15115 with the Subaru Coronagraphic Extreme Adaptive Optics system (SCExAO) coupled with the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS). SCExAO/CHARIS resolves the disk down to $ρ\sim 0.2''$ ($\rm{r_{proj}} \sim 10$ $\rm{au}$), a factor of $\sim 3-5$ smaller than previous recent studies. We derive a disk position angle of $\rm{PA}$ $\sim 279.4^\circ - 280.5^\circ$ and an inclination of $\rm{i}$ $\sim 85.3^\circ - 86.2^\circ$. While recent SPHERE/IRDIS imagery of the system could suggest a significantly misaligned two ring disk geometry, CHARIS imagery does not reveal conclusive evidence for this hypothesis. Moreover, optimizing models of both one and two ring geometries using differential evolution, we find that a single ring having a Hong-like scattering phase function matches the data equally well within the CHARIS field of view ($ρ\lesssim 1''$). The disk's asymmetry, well-evidenced at larger separations, is also recovered; the west side of the disk appears on average around 0.4 magnitudes brighter across the CHARIS bandpass between $0.25''$ and $1''$. Comparing STIS/50CCD optical photometry ($2000-10500$ $Å$) with CHARIS NIR photometry, we find a red (STIS/50CCD$-$CHARIS broadband) color for both sides of the disk throughout the $0.4'' - 1''$ region of overlap, in contrast to the blue color reported at similar wavelengths for regions exterior to $\sim 2''$. Further, this color may suggest a smaller minimum grain size than previously estimated at larger separations. Finally, we provide constraints on planetary companions, and discuss possible mechanisms for the observed inner disk flux asymmetry and color.

preprint2019arXiv

Atmospheric Characterization and Further Orbital Modeling of $κ$ And b

We present $κ$ Andromeda b's photometry and astrometry taken with Subaru/SCExAO+HiCIAO and Keck/NIRC2, combined with recently published SCExAO/CHARIS low-resolution spectroscopy and published thermal infrared photometry to further constrain the companion's atmospheric properties and orbit. $κ$ And b's Y/Y-K colors are redder than field dwarfs, consistent with its youth and lower gravity. Empirical comparisons of its Y-band photometry and CHARIS spectrum to a large spectral library of isolated field dwarfs reaffirm the conclusion from Currie et al. (2018) that it likely has a low gravity but admit a wider range of most plausible spectral types (L0-L2). Our gravitational classification also suggests that the best-fit objects for $κ$ And b may have lower gravity than those previously reported. Atmospheric models lacking dust/clouds fail to reproduce its entire 1--4.7 $μm$ spectral energy distribution, cloudy atmosphere models with temperatures of $\sim$ 1700--2000 $K$ better match $κ$ And b data. Most well-fitting model comparisons favor 1700--1900 $K$, a surface gravity of log(g) $\sim$ 4--4.5, and a radius of 1.3--1.6\,$R_{\rm Jup}$; the best-fit model (DRIFT-Phoenix) yields the coolest and lowest-gravity values: $T_{\rm eff}$=1700 K and $\log g$=4.0. An update to $κ$ And b's orbit with ExoSOFT using new astrometry spanning seven years reaffirms its high eccentricity ($0.77\pm0.08$). We consider a scenario where unseen companions are responsible for scattering $κ$ And b to a wide separation and high eccentricity. If three planets, including $κ$ And b, were born with coplanar orbits and one of them was ejected by gravitational scattering, a potential inner companion with mass $\gtrsim10M_{\rm Jup}$ could be located at $\lesssim$ 25 au.

preprint2019arXiv

First on-sky demonstration of an integrated-photonic nulling-interferometer: The GLINT instrument

The characterisation of exoplanets is critical to understanding planet diversity and formation, their atmospheric composition and the potential for life. This endeavour is greatly enhanced when light from the planet can be spatially separated from that of the host star. One potential method is nulling interferometry, where the contaminating starlight is removed via destructive interference. The GLINT instrument is a photonic nulling interferometer with novel capabilities that has now been demonstrated in on-sky testing. The instrument fragments the telescope pupil into sub-apertures that are injected into waveguides within a single-mode photonic chip. Here, all requisite beam splitting, routing and recombination is performed using integrated photonic components. We describe the design, construction and laboratory testing of our GLINT pathfinder instrument. We then demonstrate the efficacy of this method on sky at the Subaru Telescope, achieving a null-depth precision on sky of $\sim10^{-4}$ and successfully determining the angular diameter of stars (via their null-depth measurements) to milli-arcsecond accuracy. A statistical method for analysing such data is described, along with an outline of the next steps required to deploy this technique for cutting-edge science.

preprint2019arXiv

High-Resolution Near-Infrared Polarimetry and Sub-Millimeter Imaging of FS Tau A: Possible Streamers in Misaligned Circumbinary Disk System

We analyzed the young (2.8-Myr-old) binary system FS Tau A using near-infrared (H-band) high-contrast polarimetry data from Subaru/HiCIAO and sub-millimeter CO (J=2-1) line emission data from ALMA. Both the near-infrared and sub-millimeter observations reveal several clear structures extending to $\sim$240 AU from the stars. Based on these observations at different wavelengths, we report the following discoveries. One arm-like structure detected in the near-infrared band initially extends from the south of the binary with a subsequent turn to the northeast, corresponding to two bar-like structures detected in ALMA observations with an LSRK velocity of 1.19-5.64 km/s. Another feature detected in the near-infrared band extends initially from the north of the binary, relating to an arm-like structure detected in ALMA observations with an LSRK velocity of 8.17-16.43 km/s. From their shapes and velocities, we suggest that these structures can mostly be explained by two streamers that connect the outer circumbinary disk and the central binary components. These discoveries will be helpful for understanding the evolution of streamers and circumstellar disks in young binary systems.

preprint2015arXiv

How to Directly Image a Habitable Planet Around Alpha Centauri with a ~30-45cm Space Telescope

Several mission concepts are being studied to directly image planets around nearby stars. It is commonly thought that directly imaging a potentially habitable exoplanet around a Sun-like star requires space telescopes with apertures of at least 1m. A notable exception to this is Alpha Centauri (A and B), which is an extreme outlier among FGKM stars in terms of apparent habitable zone size: the habitable zones are ~3x wider in apparent size than around any other FGKM star. This enables a ~30-45cm visible light space telescope equipped with a modern high performance coronagraph or starshade to resolve the habitable zone at high contrast and directly image any potentially habitable planet that may exist in the system. We presents a brief analysis of the astrophysical and technical challenges involved with direct imaging of Alpha Centauri with a small telescope and describe two new technologies that address some of the key technical challenges. In particular, the raw contrast requirements for such an instrument can be relaxed to 1e-8 if the mission spends 2 years collecting tens of thousands of images on the same target, enabling a factor of 500-1000 speckle suppression in post processing using a new technique called Orbital Difference Imaging (ODI). The raw light leak from both stars is controllable with a special wavefront control algorithm known as Multi-Star Wavefront Control (MSWC), which independently suppresses diffraction and aberrations from both stars using independent modes on the deformable mirror. We also show an example of a small coronagraphic mission concept to take advantage of this opportunity.

preprint2015arXiv

On-sky demonstration of low-order wavefront sensing and control with focal plane phase mask coronagraphs

The ability to characterize exoplanets by spectroscopy of their atmospheres requires direct imaging techniques to isolate planet signal from the bright stellar glare. One of the limitations with the direct detection of exoplanets, either with ground- or space-based coronagraphs, is pointing errors and other low-order wavefront aberrations. The coronagraphic detection sensitivity at the diffraction limit therefore depends on how well low-order aberrations upstream of the focal plane mask are corrected. To prevent starlight leakage at the inner working angle of a phase mask coronagraph, we have introduced a Lyot-based low-order wavefront sensor (LLOWFS), which senses aberrations using the rejected starlight diffracted at the Lyot plane. In this paper, we present the implementation, testing and results of LLOWFS on the Subaru Coronagraphic Extreme Adaptive Optics system (SCExAO) at the Subaru Telescope. We have controlled thirty-five Zernike modes of a H-band vector vortex coronagraph in the laboratory and ten Zernike modes on sky with an integrator control law. We demonstrated a closed-loop pointing residual of 0.02 mas in the laboratory and 0.15 mas on sky for data sampled using the minimal 2-second exposure time of the science camera. We have also integrated the LLOWFS in the visible high-order control loop of SCExAO, which in closed-loop operation has validated the correction of the non-common path pointing errors between the infrared science channel and the visible wavefront sensing channel with pointing residual of 0.23 mas on sky.

preprint2015arXiv

Space telescope design to directly image the habitable zone of Alpha Centauri

The scientific interest in directly image and identifying Earth-like planets within the Habitable Zone (HZ) around nearby stars is driving the design of specialized direct imaging mission such as ACESAT, EXO-C, EXO-S and AFTA-C. The inner edge of Alpha Cen A and B Habitable Zone is found at exceptionally large angular separations of 0.7 and 0.4 arcseconds respectively. This enables direct imaging of the system with a 0.3m class telescope. Contrast ratios in the order of 1e-10 are needed to image Earth-brightness planets. Low-resolution (5-band) spectra of all planets, will allow establishing the presence and amount of an atmosphere. This star system configuration is optimal for a specialized small, and stable space telescope, that can achieve high-contrast but has limited resolution. This paper describes an innovative instrument design and a mission concept based on a full Silicon Carbide off-axis telescope, which has a Phase Induce Amplitude Apodization coronagraph embedded in the telescope. This architecture maximizes stability and throughput. A Multi-Star Wave Front algorithm is implemented to drive a deformable mirror controlling simultaneously diffracted light from the on-axis and binary companion star. The instrument has a Focal Plane Occulter to reject starlight into a high-precision pointing control camera. Finally we utilize a Orbital Differential Imaging (ODI) post-processing method that takes advantage of a highly stable environment (Earth-trailing orbit) and a continuous sequence of images spanning 2 years, to reduce the final noise floor in post processing to 2e-11 levels, enabling high confidence and at least 90 percent completeness detections of Earth-like planets.

preprint2014arXiv

EXCEDE Technology Development III: First Vacuum Tests

This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and beyond. This will allow it to directly detect and spatially resolve low surface brightness circumstellar debris disks as well as image giant planets as close as in the habitable zones of their host stars. In addition to doing fundamental science on debris disks, EXCEDE will also serve as a technological and scientific precursor for any future exo-Earth imaging mission. EXCEDE uses a Starlight Suppression System (SSS) based on the PIAA coronagraph, enabling aggressive performance. We report on our continuing progress of developing the SSS for EXCEDE, and in particular (a) the reconfiguration of our system into a more flight-like layout, with an upstream deformable mirror and an inverse PIAA system, as well as a LOWFS, and (b) testing this system in a vacuum chamber, including IWA, contrast, and stability performance. The results achieved so far are 2.9e-7 contrast between 1.2-2.0 l/D and 9.7e-8 contrast between 2.0-6.0 l/D in monochromatic light; as well as 1.4e-6 between 2.0-6.0 l/D in a 10% band, all with a PIAA coronagraph operating at an inner working angle of 1.2 l/D. This constitutes better contrast than EXCEDE requirements (in those regions) in monochromatic light, and progress towards requirements in broadband light. Even though this technology development is primarily targeted towards EXCEDE, it is also germane to any exoplanet direct imaging space-based telescopes because of the many challenges common to different coronagraph architectures and mission requirements.

preprint2014arXiv

Experimental study of a low-order wavefront sensor for high-contrast coronagraphic imagers: results in air and in vacuum

For the technology development of the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) - a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D - we developed two test benches simulating its key components, one in air, the other in vacuum. To achieve this level of contrast, one of the main goals is to remove low-order aberrations, using a Low-Order WaveFront Sensor (LOWFS). We tested this key component, together with the coronagraph and the wavefront control, in air at NASA Ames Research Center and in vacuum at Lockheed Martin. The LOWFS, controlling tip/tilt modes in real time at 1~kHz, allowed us to reduce the disturbances in air to 1e-3 lambda/D rms, letting us achieve a contrast of 2.8e-7 between 1.2 and 2 lambda/D. Tests are currently being performed to achieve the same or a better level of correction in vacuum. With those results, and by comparing them to simulations, we are able to deduce its performances on different coronagraphs - different sizes of telescopes, inner working angles, contrasts, etc. - and therefore study its contribution beyond EXCEDE.

preprint2013arXiv

Could Jean-Dominique Cassini see the famous division in Saturn's rings?

Nowadays, astronomers want to observe gaps in exozodiacal disks to confirm the presence of exoplanets, or even make actual images of these companions. Four hundred and fifty years ago, Jean-Dominique Cassini did a similar study on a closer object: Saturn. After joining the newly created Observatoire de Paris in 1671, he discovered 4 of Saturn's satellites (Iapetus, Rhea, Tethys and Dione), and also the gap in its rings. He made these discoveries observing through the best optics at the time, made in Italy by famous opticians like Giuseppe Campani or Eustachio Divini. But was he really able to observe this black line in Saturn's rings? That is what a team of optical scientists from Observatoire de Paris - LESIA with the help of Onera and Institut d'Optique tried to find out, analyzing the lenses used by Cassini, and still preserved in the collection of the observatory. The main difficulty was that even if the lenses have diameters between 84 and 239 mm, the focal lengths are between 6 and 50 m, more than the focal lengths of the primary mirrors of future ELTs. The analysis shows that the lenses have an exceptionally good quality, with a wavefront error of approximately 50 nm rms and 200 nm peak-to-valley, leading to Strehl ratios higher than 0.8. Taking into account the chromaticity of the glass, the wavefront quality and atmospheric turbulence, reconstructions of his observations tend to show that he was actually able to see the division named after him.

preprint2013arXiv

Experimental study of a low-order wavefront sensor for a high-contrast coronagraphic imager at 1.2 lambda/D

High-contrast imaging will be a challenge for future ELTs, because their vibrations create low-order aberrations - mostly tip/tilt - that reduce coronagraphic performances at 1.2 lambda/D and above. A Low-Order WaveFront Sensor (LOWFS) is essential to measure and control those aberrations. An experiment simulating a starlight suppression system is currently developed at NASA Ames Research Center, and includes a LOWFS controlling tip/tilt modes in real-time at 500 Hz. The LOWFS allowed us to reduce the tip/tilt disturbances to 1e-3 lambda/D rms, enhancing the previous contrast by a decade, to 8e-7 between 1.2 and 2 lambda/D. A Linear Quadratic Gaussian (LQG) controller is currently implemented to improve even more that result by reducing residual vibrations. This testbed is developed for the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, and designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D. Although the testbed simulates space conditions, its LOWFS has the same design than on the SCExAO instrument at Subaru telescope, with whom it shares the same kind of problematic. Experimental results show that a good knowledge of the low-order disturbances is a key asset for high contrast imaging, whether for real-time control or for post processing, both in space and on ground telescopes.

preprint2013arXiv

Experimental study of a low-order wavefront sensor for the high-contrast coronagraphic imager EXCEDE

The mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, is designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D. One of the key challenges to achieve those contrasts is to remove low-order aberrations, using a Low-Order WaveFront Sensor (LOWFS). An experiment simulating the starlight suppression system is currently developed at NASA Ames Research Center, and includes a LOWFS controlling tip/tilt modes in real time at 500 Hz. The LOWFS allowed us to reduce the tip/tilt disturbances to 1e-3 lambda/D rms, enhancing the previous contrast by a decade, to 8e-7 between 1.2 and 2 lambda/D. A Linear Quadratic Gaussian (LQG) controller is currently implemented to improve even more that result by reducing residual vibrations. This testbed shows that a good knowledge of the low-order disturbances is a key asset for high contrast imaging, whether for real-time control or for post processing.

preprint2011arXiv

Current results of the PERSEE testbench: the cophasing control and the polychromatic null rate

Stabilizing a nulling interferometer at a nanometric level is the key issue to obtain deep null depths. The PERSEE breadboard has been designed to study and optimize the operation of a cophased nulling bench in the most realistic disturbing environment of a space mission. This presentation focuses on the current results of the PERSEE bench. In terms of metrology, we cophased at 0.33 nm rms for the piston and 80 mas rms for the tip/tilt (0.14% of the Airy disk). A Linear Quadratic Gaussian (LQG) control coupled with an unsupervised vibration identification allows us to maintain that level of correction, even with characteristic vibrations of nulling interferometry space missions. These performances, with an accurate design and alignment of the bench, currently lead to a polychromatic unpolarised null depth of 8.9E-6 stabilized at 3E-7 on the [1.65-2.45] \mum spectral band (37% bandwidth).

preprint2010arXiv

PERSEE: Experimental results on the cophased nulling bench

Nulling interferometry is still a promising method to characterize spectra of exoplanets. One of the main issues is to cophase at a nanometric level each arm despite satellite disturbances. The bench PERSEE aims to prove the feasibility of that technique for spaceborne missions. After a short description of PERSEE, we will first present the results obtained in a simplified configuration: we have cophased down to 0.22 nm rms in optical path difference (OPD) and 60 mas rms in tip/tilt, and have obtained a monochromatic null of 3E-5 stabilized at 3E-6. The goal of 1 nm with additional typical satellite disturbances requires the use of an optimal control law; that is why we elaborated a dedicated Kalman filter. Simulations and experiments show a good rejection of disturbances. Performance of the bench should be enhanced by using a Kalman control law, and we should be able to reach the desired nanometric stability. Following, we will present the first results of the final polychromatic configuration, which includes an achromatic phase shifter, perturbators and optical delay lines. As a conclusion, we give the first more general lessons we have already learned from this experiment, both at system and component levels for a future space mission.

preprint2009arXiv

Phase-Induced Amplitude Apodization on centrally obscured pupils: design and first laboratory demonstration for the Subaru Telescope pupil

High contrast coronagraphic imaging is challenging for telescopes with central obstructions and thick spider vanes, such as the Subaru Telescope. We present in this paper the first laboratory demonstration of a high efficiency PIAA-type coronagraph on such a pupil, using coronagraphic optics which will be part of the Subaru Coronagraphic Extreme-AO (SCExAO) system currently under assembly. Lossless pupil apodization is performed by a set of aspheric PIAA lenses specifically designed to also remove the pupil's central obstruction, coupled with a Spider Removal Plate (SRP) which removes spider vanes by translating four parts of the pupil with tilted plane-parallel plates. An "inverse-PIAA" system, located after the coronagraphic focal plane mask, is used to remove off-axis aberrations and deliver a wide field of view. Our results validate the concept adopted for the SCExAO system, and show that the Subaru Telescope pupil can properly be apodized for high contrast coronagraphic imaging as close as $\approx$ 1 $λ/D$ with no loss of sensitivity. We also verify that off-axis aberrations in the system are in agreement with theory, and that the inverse PIAA system recovers a wide usable field of view for exoplanet detection and disks imaging.

preprint2009arXiv

The Subaru Coronagraphic Extreme AO project

High contrast coronagraphic imaging is a challenging task for telescopes with central obscurations and thick spider vanes, such as the Subaru Telescope. Our group is currently assembling an extreme AO bench designed as an upgrade for the newly commissionned coronagraphic imager instrument HiCIAO, that addresses these difficulties. The so-called SCExAO system combines a high performance PIAA coronagraph to a MEMS-based wavefront control system that will be used in complement of the Subaru AO188 system. We present and demonstrate good performance of two key optical components that suppress the spider vanes, the central obscuration and apodize the beam for high contrast coronagraphy, while preserving the throughput and the angular resolution.