Source author record

D. Vuillaume

D. Vuillaume appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

18works
8topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

18 published item(s)

preprint2022arXiv

Nanoscale thermal conductivity of Kapton-derived carbonaceous materials

This study explores the potentialities of Scanning Thermal Microscopy (SThM) technique as a tool for measuring thermal transporting properties of carbon-derived materials issued from thermal conversion of organic polymers, such as the most commonly known polyimide (PI), Kapton. For quantitative measurements, the Null Point SThM (NP-SThM) technique is used in order to avoid unwanted effects as the parasitic heat flows through the air and the probe cantilever. Kapton HN films were pyrolysed in an inert atmosphere at temperatures up to 1200°C to produce carbon-based residues with varying degree of conversion to free sp2 disordered carbon. The thermal conductivity of carbon materials ranges from 0.2 to 2 Wm-1K-1 depending on the temperature of the carbonization process (varied between 500°C and 1200°C). In order to validate the applicability of NP-SThM approach to these materials, the results were compared to those obtained with the three more traditional techniques, namely photo-thermal radiometry, flash laser analysis and micro-Raman thermometry. It was found that NP SThM data are in excellent agreement with previous work using more traditional techniques. We used the NP-SThM technique to differentiate structural heterogeneities or imperfections at the surface of the pyrolysed Kapton on the basis of measured local thermal conductivity.

preprint2022arXiv

Thermal and electrical cross-plane conductivity at the nanoscale in poly(3,4-ethylenedioxythiophene):trifuoromethanesulfonate thin films

Cross-plane electrical and thermal transport in thin films of a conducting polymer (poly(3,4-ethylenedioxythiophene), PEDOT) stabilized with trifluoromethanesulfonate (OTf) is investigated in this study. We explore their electrical properties by conductive atomic force microscopy (C-AFM), which reveals the presence of highly conductive nano-domains. Thermal conductivity in cross-plane direction is measured with Null-Point scanning thermal microscopy (NP-SThM): PEDOT:OTf indeed demonstrates non-negligible electronic contribution to the thermal transport. We further investigate the correlation between electrical and thermal conductivity by applying posttreatment: chemical reduction (de-doping) for the purpose of lowering charge carrier concentration and hence, electrical conductivity and acid treatment (over-doping) to increase the latter. From our measurements, we find a vibrational thermal conductivity of 0.34 (+/- 0.04) Wm-1 K-1. From the linear dependence or the electronic contribution of thermal conductivity vs. the electronic conductivity (Widemann-Franz law), we infer a Lorenz number 6 times larger than the classical Sommerfeld value as also observed in many organic materials for in-plane thermal transport. Applying the recently proposed molecular Widemann-Franz law, we deduced a reorganization energy of 0.53 (+/- 0.06) eV.

preprint2020arXiv

Conductance switching at the nanoscale of diarylethene derivatives self-assembled monolayers on La$_{0.7}$Sr$_{0.3}$MnO$_3$

We report on the phosphonic acid route for the grafting of functional molecules, optical switch (dithienylethene diphosphonic acid, DDA), on La0.7Sr0.3MnO3 (LSMO). Compact self-assembled monolayers (SAMs) of DDA are formed on LSMO as studied by topographic atomic force microscopy (AFM), ellipsometry, water contact angle and X-ray photoemission spectroscopy (XPS). The conducting AFM measurements show that the electrical conductance of LSMO/DDA is about 3 decades below that of the bare LSMO substrate. Moreover, the presence of the DDA SAM suppresses the known conductance switching of the LSMO substrate that is induced by mechanical and/or bias constraints during C-AFM measurements. A partial light-induced conductance switching between the open and closed forms of the DDA is observed for the LSMO/DDA/C-AFM tip molecular junctions (closed/open conductance ratio of about 8). We show that, in the case of long-time exposition to UV light, this feature can be masked by a non-reversible decrease (a factor of about 15) of the conductance of the LSMO electrode.

preprint2020arXiv

Electrical molecular switch addressed by chemical stimuli

We demonstrate that the conductance switching of benzo-bis(imidazole) molecules upon protonation depends on the lateral functional groups. The protonated H-substituted molecule shows a higher conductance than the neutral one (Gpro>Gneu), while the opposite (Gneu>Gpro) is observed for a molecule laterally functionalized by amino-phenyl groups. These results are demonstrated at various scale lengths : self-assembled monolayer, tiny nanodot-molecule junction and single molecules. From ab-initio theoretical calculations, we conclude that for the H-substituted molecule, the result Gpro>Gneu is correctly explained by a reduction of the LUMO-HOMO gap, while for the amino-phenyl functionnalized molecule, the result Gneu>Gpro is consistent with a shift of HOMO, which reduces the density of states at the Fermi energy.

preprint2016arXiv

Physical Study by Surface Characterizations of Sarin Sensor on the Basis of Chemically Functionalized Silicon Nanoribbon Field Effect Transistor

Surface characterizations of an organophosphorus (OP) gas detector based on chemically functionalized silicon nanoribbon field-effect transistor (SiNR-FET) were performed by Kelvin Probe Force Microscopy (KPFM) and ToF-SIMS, and correlated with changes in the current-voltage characteristics of the devices. KPFM measurements on FETs allow (i) to investigate the contact potential difference (CPD) distribution of the polarized device as function of the gate voltage and the exposure to OP traces and, (ii) to analyze the CPD hysteresis associated to the presence of mobile ions on the surface. The CPD measured by KPFM on the silicon nanoribbon was corrected due to side capacitance effects in order to determine the real quantitative surface potential. Comparison with macroscopic Kelvin probe (KP) experiments on larger surfaces was carried out. These two approaches were quantitatively consistent. An important increase of the CPD values (between + 399 mV and + 302 mV) was observed after the OP sensor grafting, corresponding to a decrease of the work function, and a weaker variation after exposure to OP (between - 14 mV and - 61 mV) was measured. Molecular imaging by ToF-SIMS revealed OP presence after SiNR-FET exposure. The OP molecules were essentially localized on the Si-NR confirming effectiveness and selectivity of the OP sensor. A prototype was exposed to Sarin vapors and succeeded in the detection of low vapor concentrations (40 ppm).

preprint2014arXiv

Interface Dipole : Effects on Threshold Voltage and Mobility for both Amorphous and Poly-crystalline Organic Field Effect Transistors

We report a detailed comparison on the role of a self-assembled monolayer (SAM) of dipolar molecules on the threshold voltage and charge carrier mobility of organic field-effect transistor (OFET) made of both amorphous and polycrystalline organic semiconductors. We show that the same relationship between the threshold voltage and the dipole-induced charges in the SAM holds when both types of devices are fabricated on strictly identical base substrates. Charge carrier mobilities, almost constant for amorphous OFET, are not affected by the dipole in the SAMs, while for polycrystalline OFET (pentacene) the large variation of charge carrier mobilities is related to change in the organic film structure (mostly grain size).

preprint2014arXiv

On the Mechanical and Electronic Properties of Thiolated Gold Nanocrystals

We present a quantitative exploration, combining experiment and simulation, of the mechanical and electronic properties, as well as the modifications induced by an alkylthiolated coating, at the single NP level. We determine the response of the NPs to external pressure in a controlled manner by using an atomic force microscope tip. We find a strong reduction of their Young modulus, as compared to bulk gold, and a significant influence of strain in the electronic properties of the alkylthiolated NPs. Electron transport measurements of tiny molecular junctions (NP/alkylthiol/CAFM tip) show that the effective tunnelling barrier through the adsorbed monolayer strongly decreases with increasing the applied load, which translates in a remarkable and unprecedented increase of the tunnel current. These observations are successfully explained using simulations based on finite element analysis (FEA) and first-principles calculations that permit to consider the coupling between the mechanical response of the system and the electric dipole variations at the interface.

preprint2013arXiv

Pavlov's dog associative learning demonstrated on synaptic-like organic transistors

In this letter, we present an original demonstration of an associative learning neural network inspired by the famous Pavlov's dogs experiment. A single nanoparticle organic memory field effect transistor (NOMFET) is used to implement each synapse. We show how the physical properties of this dynamic memristive device can be used to perform low power write operations for the learning and implement short-term association using temporal coding and spike timing dependent plasticity based learning. An electronic circuit was built to validate the proposed learning scheme with packaged devices, with good reproducibility despite the complex synaptic-like dynamic of the NOMFET in pulse regime.

preprint2013arXiv

Water Electrolysis and Energy Harvesting with 0D Ion-Sensitive Field-Effect Transistors

The relationship of the gas bubble size to the size distribution critically influences the effectiveness of electrochemical processes. Several optical and acoustical techniques have been used to characterize the size and emission frequency of bubbles. Here, we used zero-dimensional (0D) ion-sensitive field-effect transistors (ISFETs) buried under a microbath to detect the emission of individual bubbles electrically and to generate statistics on the bubble emission time. The bubble size was evaluated via a simple model of the electrolytic current. We suggest that energy lost during water electrolysis could be used to generate electric pulses at an optimal efficiency with an array of 0D ISFETs.

preprint2012arXiv

Low Frequency Dielectric Loss of Metal/Insulator/Organic Semiconductor Junctions in Ambient Conditions

The complex admittance of metal/oxide/pentacene thin film junctions is investigated under ambient conditions. At low frequencies, a contribution attributed to proton diffusion through the oxide is seen. This diffusion is shown to be anomalous and is believed to be also at the origin of the bias stress effect observed in organic field effect transistors. At higher frequencies, two dipolar contributions are evidenced, attributed to defects located one at the organic/oxide interface or within the organic, and the other in the bulk of the oxide. These two dipolar responses show different dynamic properties that manifest themselves in the admittance in the form of a Debye contribution for the defects located in the oxide, and of a Cole-Cole contribution for the defects related to the organic.

preprint2011arXiv

A memristive nanoparticle/organic hybrid synapstor for neuro-inspired computing

A large effort is devoted to the research of new computing paradigms associated to innovative nanotechnologies that should complement and/or propose alternative solutions to the classical Von Neumann/CMOS association. Among various propositions, Spiking Neural Network (SNN) seems a valid candidate. (i) In terms of functions, SNN using relative spike timing for information coding are deemed to be the most effective at taking inspiration from the brain to allow fast and efficient processing of information for complex tasks in recognition or classification. (ii) In terms of technology, SNN may be able to benefit the most from nanodevices, because SNN architectures are intrinsically tolerant to defective devices and performance variability. Here we demonstrate Spike-Timing-Dependent Plasticity (STDP), a basic and primordial learning function in the brain, with a new class of synapstor (synapse-transistor), called Nanoparticle Organic Memory Field Effect Transistor (NOMFET). We show that this learning function is obtained with a simple hybrid material made of the self-assembly of gold nanoparticles and organic semiconductor thin films. Beyond mimicking biological synapses, we also demonstrate how the shape of the applied spikes can tailor the STDP learning function. Moreover, the experiments and modeling show that this synapstor is a memristive device. Finally, these synapstors are successfully coupled with a CMOS platform emulating the pre- and post-synaptic neurons, and a behavioral macro-model is developed on usual device simulator.

preprint2011arXiv

Large array of sub-10 nm single-grain Au nanodots for use in nanotechnology

A uniform array of single-grain Au nanodots, as small as 5-8 nm, can be formed on silicon using e-beam lithography. The as-fabricated nanodots are amorphous, and thermal annealing converts them to pure Au single crystals covered with a thin SiO2 layer. These findings are based on physical measurements, such as atomic force microscopy (AFM), atomic resolution scanning transmission electron microscopy, and chemical techniques using energy dispersive x-ray spectroscopy. A self-assembled organic monolayer is grafted on the nanodots and characterized chemically with nanometric lateral resolution. We use the extended uniform array of nanodots as a new test-bed for molecular electronics devices.

preprint2010arXiv

A Silicon Nanowire Ion-Sensitive Field-Effect-Transistor with elementary charge sensitivity

We investigate the mechanisms responsible for the low-frequency noise in liquid-gated nano-scale silicon nanowire field-effect transistors (SiNW-FETs) and show that the charge-noise level is lower than elementary charge. Our measurements also show that ionic strength of the surrounding electrolyte has a minimal effect on the overall noise. Dielectric polarization noise seems to be at the origin of the 1/f noise in our devices. The estimated spectral density of charge noise Sq = 1.6x10-2 e/sqr(Hz) at 10 Hz opens the door to metrological studies with these SiNW-FETs for the electrical detection of a small number of molecules.

preprint2010arXiv

One-by-one trap activation in silicon nanowire transistors

Flicker or 1/f noise in metal-oxide-semiconductor field-effect transistors (MOSFETs) has been identified as the main source of noise at low frequency. It often originates from an ensemble of a huge number of charges trapping and detrapping. However, a deviation from the well-known model of 1/f noise is observed for nanoscale MOSFETs and a new model is required. Here, we report the observation of one-by-one trap activation controlled by the gate voltage in a nanowire MOSFET and we propose a new low-frequency-noise theory for nanoscale FETs. We demonstrate that the Coulomb repulsion between electronically charged trap sites avoids the activation of several traps simultaneously. This effect induces a noise reduction by more than one order of magnitude. It decreases when increasing the electron density in the channel due to the electrical screening of traps. These findings are technologically useful for any FETs with a short and narrow channel.

preprint2010arXiv

Synthesis and electrical properties of fullerene-based molecular junctions on silicon substrate

We report the synthesis and the electrical properties of fullerene-based molecular junctions on silicon substrate in which the highly π-conjugated molecule C60 (πquantum well) is isolated from the electrodes by alkyl chains (σtunnel barriers). Initially, the Si/SiO2/\sigmaC60 architecture was prepared either by sequential synthesis (3 different routes) or by direct grafting of the presynthesized C60-σ-Si(OEt)3 molecule. We described the chemical synthesis of these routes and the physico-chemical properties of the molecular monolayers. Then, the second σtunnel barrier was added on the Si/SiO2/σC60 junction by applying a hanging mercury drop electrode thiolated with an alkanethiol monolayer. We compared the electronic transport properties of the Si/SiO2/σC60//Hg and Si/SiO2/σC60//\sigmaHg molecular junctions, and we demonstrated by transition voltage spectroscopy that the fullerene LUMO - metal Fermi energy offset can be tailored from ~ 0.2 eV to ~ 1 eV by changing the length of the alkyl chain between the C60 core and the Hg metal electrode (i. e. from direct C60//Hg contact to 14 carbon atoms tunnel barrier).

preprint2009arXiv

An organic nanoparticle transistor behaving as a biological synapse

Molecule-based devices are envisioned to complement silicon devices by providing new functions or already existing functions at a simpler process level and at a lower cost by virtue of their self-organization capabilities. Moreover, they are not bound to von Neuman architecture and this feature may open the way to other architectural paradigms. Neuromorphic electronics is one of them. Here we demonstrate a device made of molecules and nanoparticles, a nanoparticle organic memory filed-effect transistor (NOMFET), which exhibits the main behavior of a biological spiking synapse. Facilitating and depressing synaptic behaviors can be reproduced by the NOMFET and can be programmed. The synaptic plasticity for real time computing is evidenced and described by a simple model. These results open the way to rate coding utilization of the NOMFET in dynamical neuromorphic computing circuits.

preprint2009arXiv

Molecular electronics based on self-assembled monolayers

Since the first measurement of electron tunneling through an organic monolayer in 1971,(Mann and Kuhn, 1971) and the gedanken experiment of a molecular current rectifying diode in 1974,(Aviram and Ratner, 1974) molecular-scale electronics have attracted a growing interest, both for basic science at the nanoscale and for possible applications in nano-electronics. In the first case, molecules are quantum object by nature and their properties can be tailored by chemistry opening avenues for new experiments. In the second case, molecule-based devices are envisioned to complement silicon devices by providing new functions or already existing functions at a simpler process level and at a lower cost by virtue of their self-organization capabilities, moreover, they are not bound to von Neuman architecture and this may open the way to other architectural paradigms. After a brief overview of the nanofabrication of molecular devices, we review in this chapter, the electronic properties of several basic devices, from simple molecules such as molecular tunnel junctions and molecular wires, to more complex ones such as molecular rectifying diodes, molecular switches and memories.

preprint2006arXiv

Electron transport through rectifying self-assembled monolayer diodes on silicon: Fermi level pinning at the molecule-metal interface

We report the synthesis and characterization of molecular rectifying diodes on silicon using sequential grafting of self-assembled monolayers of alkyl chains bearing a pi group at their outer end (Si/sigma-pi/metal junctions). We investigate the structure-performance relationships of these molecular devices and we examine to what extent the nature of the pi end-group (change in the energy position of their molecular orbitals) drives the properties of these molecular diodes. For all the pi-groups investigated here, we observe rectification behavior. These results extend our preliminary work using phenyl and thiophene groups (S. Lenfant et al., Nano Letters 3, 741 (2003)).The experimental current-voltage curves are analyzed with a simple analytical model, from which we extract the energy position of the molecular orbital of the pi-group in resonance with the Fermi energy of the electrodes. We report the experimental studies of the band lineup in these silicon/alkyl-pi conjugated molecule/metal junctions. We conclude that Fermi level pinning at the pi-group/metal interface is mainly responsible for the observed absence of dependence of the rectification effect on the nature of the pi-groups, even though they were chosen to have significant variations in their electronic molecular orbitals