Source author record

Claus Heussinger

Claus Heussinger appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

28works
7topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

28 published item(s)

preprint2023arXiv

Collapse of columns of granular rods

Simulation results are presented on the collapse of granular columns composed of rod-like particles. Columns can be stable and free-standing if either the friction coefficient is large enough, or the rods long enough. Destabilizing gravitational forces are counteracted by increased frictional forces between the rods. Different to columns made of spherical particles this is possible, because rod contacts can slide along the rod axes to generate the necessary "frictional cohesion".

preprint2020arXiv

Packings of frictionless spherocylinders

We present simulation results on the properties of packings of frictionless spherocylindrical particles. Starting from a random distribution of particles in space, a packing is produced by minimizing the potential energy of inter-particle contacts until a force-equilibrated state is reached. For different particle aspect ratios $α=10\ldots 40$, we calculate contacts $z$, pressure as well as bulk and shear modulus. Most important is the fraction $f_0$ of spherocylinders with contacts at both ends as it governs the jamming threshold $z_c(f_0)=8+2f_0$. These results highlight the important role of the axial "sliding" degree of freedom of a spherocylinder, which is a zero-energy mode but only if no end-contacts are present.

preprint2019arXiv

Unsteady flow, clusters and bands in a model shear-thickening fluid

We analyse the flow curves of a two-dimensional assembly of granular particles which are interacting via frictional contact forces. For packing fractions slightly below jamming, the fluid undergoes a large scale instability, implying a range of stress and strainrates where no stationary flow can exist. Whereas small systems were shown previously to exhibit hysteretic jumps between the low and high stress branches, large systems exhibit continuous shear thickening arising from averaging unsteady, spatially heterogeneous flows. The observed large scale patterns as well as their dynamics are found to depend on strainrate: At the lower end of the unstable region, force chains merge to form giant bands that span the system in compressional direction and propagate in dilational direction. At the upper end, we observe large scale clusters which extend along the dilational direction and propagate along the compressional direction. Both patterns, bands and clusters, come in with infinite correlation length similar to the sudden onset of system-spanning plugs in impact experiments.

preprint2016arXiv

Athermal rheology of weakly attractive soft particles

We study the rheology of a soft particulate system where the inter-particle interactions are weakly attractive. Using extensive molecular dynamics simulations, we scan across a wide range of packing fractions ($ϕ$), attraction strengths ($u$) and imposed shear-rates ($\dotγ$). In striking contrast to repulsive systems, we find that at small shear-rates generically a fragile isostatic solid is formed even if we go to $ϕ\ll ϕ_J$. Further, with increasing shear-rates, even at these low $ϕ$, non-monotonic flow curves occur which lead to the formation of persistent shear-bands in large enough systems. By tuning the damping parameter, we also show that inertia plays an important role in this process. Furthermore, we observe enhanced particle dynamics in the attraction-dominated regime as well as a pronounced anisotropy of velocity and diffusion constant, which we take as precursors to the formation of shear bands. At low enough $ϕ$, we also observe structural changes via the interplay of low shear-rates and attraction with the formation of micro-clusters and voids. Finally, we characterize the properties of the emergent shear bands and thereby, we find surprisingly small mobility of these bands, leading to prohibitely long time-scales and extensive history effects in ramping experiments.

preprint2016arXiv

Friction-induced Shear thickening: a microscopic perspective

We develop a microscopic picture of shear thickening in dense suspensions which emphasizes the role of frictional forces, coupling rotational and translational degrees of freedom. Simulations with contact forces and viscous drag only, reveal pronounced shear thickening with a simultaneous increase in contact number and energy dissipation by frictional forces. At high densities, when the translational motion is severely constrained, we observe liquid-like gear-states with pronounced relative rotations of the particles coexisting with solid-like regions which rotate as a whole. The latter are stabilised by frustrated loops which become more numerous and persistent with increasing pressure, giving rise to an increasing lengthscale of this mosaique-like structure and a corresponding increase in viscosity.

preprint2016arXiv

Rheological Chaos of Frictional Grains

A two-dimensional dense fluid of frictional grains is shown to exhibit time-chaotic, spatially heterogeneous flow in a range of stress values, $σ$, chosen in the unstable region of s-shaped flow curves. Stress controlled simulations reveal a phase diagram with reentrant stationary flow for small and large stress $σ$. In between no steady flow state can be reached, instead the system either jams or displays time dependent heterogeneous strain rates $\dotγ({\bf r},t)$. The results of simulations are in agreement with the stability analysis of a simple hydrodynamic model, coupling stress and microstructure which we tentatively associate with the frictional contact network.

preprint2016arXiv

Thermalized connectivity networks of jammed packings

Jammed packings of repulsive elastic spheres have emerged as a rich model system within which elastic properties of disordered glassy materials may be elucidated. Most of the work on these packings have focused on the case of vanishing temperature. Here, we explore the elastic properties of the associated connectivity network for finite temperatures, ignoring the breaking of bonds and the formation of new ones. Using extensive Monte Carlo simulations, we find that, as the temperature is increased, the resulting spring network shrinks and exhibits a rapidly softening bulk modulus via a cusp. Moreover, the shear modulus stiffens in a fixed volume ensemble but not in a fixed pressure ensemble. These counter-intuitive behaviors may be understood from the characteristic spectrum of soft modes near isostaticity, which resembles the spectrum of a rod near its buckling instability. Our results suggest a generic mechanism for negative thermal expansion coefficients in marginal solids. We discuss the consequences of bond breaking and an apparent analogy between thermalization and shear.

preprint2016arXiv

Viscoelasticity of reversibly crosslinked networks of semiflexible polymers

We present a theoretical framework for the linear and nonlinear visco-elastic properties of reversibly crosslinked networks of semiflexible polymers. In contrast to affine models where network strain couples to the polymer end-to-end distance, in our model strain rather serves to locally distort the network structure. This induces bending modes in the polymer filaments, the properties of wich are slaved to the surrounding network structure. Specifically, we investigate the frequency-dependent linear rheology, in particular in combination with crosslink binding/unbinding processes. We also develop schematic extensions to describe the nonlinear response during creep measurements as well as during constant-strainrate ramps.

preprint2015arXiv

Free volume under shear

Using an athermal quasistatic simulation protocol, we study the distribution of free volumes in sheared hard-particle packings close to, but below, the random-close packing threshold. We show that under shear, and independent of volume fraction, the free volumes develop features similar to close-packed systems -- particles self-organize in a manner as to mimick the isotropically jammed state. We compare athermally sheared packings with thermalized packings and show that thermalization leads to an erasure of these structural features. The temporal evolution, in particular the opening-up and the closing of free-volume patches is associated with the single-particle dynamics, showing a crossover from ballistic to diffusive behavior.

preprint2015arXiv

Motor-free actin bundle contractility driven by molecular crowding

Modeling approaches of suspended, rod-like particles and recent experimental data have shown that depletion forces display different signatures depending on the orientation of these particles. It has been shown that axial attraction of two rods yields contractile forces of 0.1pN that are independent of the relative axial shift of the two rods. Here, we measured depletion-caused interactions of actin bundles extending the phase space of single pairs of rods to a multi-particle system. In contrast to a filament pair, we found forces up to 3pN . Upon bundle relaxation forces decayed exponentially with a mean decay time of 3.4s . These different dynamics are explained within the frame of a mathematical model by taking pairwise interactions to a multi-filament scale. The macromolecular content employed for our experiments is well below the crowding of cells. Thus, we propose that arising forces can contribute to biological force generation without the need to convert chemical energy into mechanical work.

preprint2014arXiv

(Ir)reversibility in dense granular systems driven by oscillating forces

We use computer simulations to study highly dense systems of granular particles that are driven by oscillating forces. We implement different dissipation mechanisms that are used to extract the injected energy. In particular, the action of a simple local Stokes' drag is compared with non-linear and history-dependent frictional forces that act either between particle pairs or between particles and an external container wall. The Stokes' drag leads to particle motion that is periodic with the driving force, even at high densities around close packing where particles undergo frequent collisions. With the introduction of inter-particle frictional forces this "interacting absorbing state" is destroyed and particles start to diffuse around. By reducing the density of the material we go through another transition to a "non-interacting" absorbing state, where particles independently follow the force-induced oscillations without collisions. In the system with particle-wall frictional interactions this transition has signs of a discontinuous phase transition. It is accompanied by a diverging relaxation time, but not by a vanishing order parameter, which rather jumps to zero at the transition.

preprint2014arXiv

Elasto-plastic response of reversibly crosslinked biopolymer bundles

We study the response of F-actin bundles to driving forces through a simple analytical model. We consider two filaments connected by reversibly bound crosslinks and driven by an external force. Two failure modes under load can be defined. \textit{Brittle failure} is observed when crosslinks suddenly and collectively unbind, leading to catastrophic loss of bundle integrity. During \textit{ductile failure}, on the other hand, bundle integrity is maintained, however at the cost of crosslink reorganization and defect formation. We present phase diagrams for the onset of failure, highlighting the importance of the crosslink stiffness for these processes. Crossing the phase boundaries, force-deflection curves display (frequency-dependent) hysteresis loops, reflecting the first-order character of the failure processes. We evidence how the introduction of defects can lead to complex elasto-plastic relaxation processes, once the force is switched off. Depending on, both, the time-scale for defect motion as well as the crosslink stiffness, bundles can remain in a quasi-permanent plastically deformed state for a very long time.

preprint2014arXiv

Impact of attractive interactions on the rheology of dense athermal particles

Using numerical simulations, the rheological response of an athermal assembly of soft particles with tunable attractive interactions is studied in the vicinity of jamming. At small attractions, a fragile solid develops and a finite yield stress is measured. Moreover, the measured flow curves have unstable regimes, which lead to persistent shearbanding. These features are rationalized by establishing a link between the rheology and the inter-particle connectivity, which also provides a minimal model to describe the flow curves.

preprint2014arXiv

Jamming of Frictional Particles: a Non-equilibrium First Order Phase Transition

We propose a phase diagram for the shear flow of dry granular particles in two dimensions based on simulations and a phenomenological Landau-theory for a nonequilibrium first order phase transition. Our approach incorporates both frictional as well as frictionless particles. The most important feature of the frictional phase diagram is re-entrant flow and a critical jamming point at finite stress. In the frictionless limit the regime of re-entrance vanishes and the jamming transition is continuous with a critical point at zero stress. The jamming phase diagrams derived from the model agree with the experiments of Bi et al. (Nature (2011)) and brings together previously conflicting numerical results.

preprint2014arXiv

Rheology near jamming - the influence of lubrication forces

We study, by computer simulations, the role of different dissipation forces on the rheological properties of highly-dense particle-laden flows. In particular, we are interested in the close-packing limit (jamming) and the question if "universal" observables can be identified that do not depend on the details of the dissipation model. To this end, we define a simplified lubrication force and systematically vary the range $h_c$ of this interaction. For fixed $h_c$ a cross-over is seen from a Newtonian flow regime at small strain rates to inertia-dominated flow at larger strain rates. The same cross-over is observed as a function of the lubrication range $h_c$. At the same time, but only at high densities close to jamming, particle velocity as well as local density distributions are unaffected by changes in the lubrication range -- they are candidates for "universal" behavior. At densities away from jamming, this universality is lost: short-range lubrication forces lead to pronounced particle clustering, while longer-ranged lubrication does not. These findings highlight the importance of "geometric" packing constraints for particle motion -- independent of the specific dissipation model. With the free volume vanishing at random-close packing, particle motion is more and more constrained by the ever smaller amount of free space. On the other side, macroscopic rheological observables, as well as higher-order correlation functions retain the variability of the underlying dissipation model.

preprint2013arXiv

Melting a granular glass by cooling

Driven granular systems readily form glassy phases at high particle volume fractions and low driving amplitudes. We use computer simulations of a driven granular glass to evidence a re-entrance melting transition into a fluid state, which, contrary to intuition, occurs by \emph{reducing} the amplitude of the driving. This transition is accompanied by anomalous particle dynamics and super-diffusive behavior on intermediate time-scales. We highlight the special role played by frictional interactions, which help particles to escape their glassy cages. Such an effect is in striking contrast to what friction is expected to do: reduce particle mobility by making them stick.

preprint2013arXiv

Shear thickening in granular suspensions: inter-particle friction and dynamically correlated clusters

We consider the shear rheology of concentrated suspensions of non-Brownian frictional particles. The key result of our study is the emergence of a pronounced shear-thickening regime, where frictionless particles would normally undergo shear-thinning. We clarify that shear thickening in our simulations is due to enhanced energy dissipation via frictional inter-particle forces. Moreover, we evidence the formation of dynamically correlated particle-clusters of size $ξ$, which contribute to shear thickening via an increase in \emph{viscous} dissipation. A scaling argument gives $η\sim ξ^2$, which is in very good agreement with the data.

preprint2012arXiv

Shear flow of non-Brownian suspensions close to jamming

The dynamical mechanisms controlling the rheology of dense suspensions close to jamming are investigated numerically, using simplified models for the relevant dissipative forces. We show that the velocity fluctuations control the dissipation rate and therefore the effective viscosity of the suspension. These fluctuations are similar in quasi-static simulations and for finite strain rate calculations with various damping schemes. We conclude that the statistical properties of grain trajectories -- in particular the critical exponent of velocity fluctuations with respect to volume fraction ϕ-- only weakly depend on the dissipation mechanism. Rather they are determined by steric effects, which are the main driving forces in the quasistatic simulations. The critical exponent of the suspension viscosity with respect to ϕcan then be deduced, and is consistent with experimental data.

preprint2012arXiv

Stress relaxation through crosslink unbinding in cytoskeletal networks

The mechanical properties of cells are dominated by the cytoskeleton, an interconnected network of long elastic filaments. The connections between the filaments are provided by crosslinking proteins, which constitute, next to the filaments, the second important mechanical element of the network. An important aspect of cytoskeletal assemblies is their dynamic nature, which allows remodeling in response to external cues. The reversible nature of crosslink binding is an important mechanism that underlies these dynamical processes. Here, we develop a theoretical model that provides insight into how the mechanical properties of cytoskeletal networks may depend on their underlying constituting elements. We incorporate three important ingredients: nonaffine filament deformations in response to network strain; interplay between filament and crosslink mechanical properties; reversible crosslink (un)binding in response to imposed stress. With this we are able to self-consistently calculate the nonlinear modulus of the network as a function of deformation amplitude and crosslink as well as filament stiffnesses. During loading crosslink unbinding processes lead to a relaxation of stress and therefore to a reduction of the network modulus and eventually to network failure, when all crosslink are unbound. This softening due to crosslink unbinding generically competes with an inherent stiffening response, which may either be due to filament or crosslink nonlinear elasticity.

preprint2011arXiv

Cooperative crosslink (un)binding in slowly driven bundles of semiflexible filaments

Combining simulations and theory I study the interplay between bundle elastic degrees of freedom and crosslink binding propensity. By slowly driving bundles into a deformed configuration, and depending on the mechanical stiffness of the crosslinking agent, the binding affinity is shown to display a sudden and discontinuous drop. This indicates a cooperative unbinding process that involves the crossing of a free-energy barrier. Choosing the proper crosslinker, therefore, not only allows to change the composite elastic properties of the bundle, but also the relevant time-scales, which can be tuned from the single-crosslink binding rate to the much longer escape time over the free-energy barrier.

preprint2011arXiv

Crosslinked biopolymer bundles: crosslink reversibility leads to cooperative binding/unbinding phenomena

We consider a biopolymer bundle consisting of filaments that are crosslinked together. The crosslinks are reversible: they can dynamically bind and unbind adjacent filament pairs as controlled by a binding enthalpy. The bundle is subjected to a bending deformation and the corresponding distribution of crosslinks is measured. For a bundle consisting of two filaments, upon increasing the bending amplitude, a first-order transition is observed. The transition is from a state where the filaments are tightly coupled by many bound crosslinks, to a state of nearly independent filaments with only a few bound crosslinks. For a bundle consisting of more than two filaments, a series of first-order transitions is observed. The transitions are connected with the formation of an interface between regions of low and high crosslink densities. Combining umbrella sampling Monte Carlo simulations with analytical calculations, we present a detailed picture of how the competition between crosslink shearing and filament stretching drives the transitions. We also find that, when the crosslinks become soft, collective behavior is not observed: the crosslinks then unbind one after the other leading to a smooth decrease of the average crosslink density.

preprint2011arXiv

Theory of Crosslinked Bundles of Helical Filaments: Intrinsic Torques in Self-Limiting Biopolymer Assemblies

Inspired by the complex influence of the globular crosslinking proteins on the formation of biofilament bundles in living organisms, we study and analyze a theoretical model for the structure and thermodynamics of bundles of helical filaments assembled in the presence of crosslinking molecules. The helical structure of filaments, a universal feature of biopolymers such as filamentous actin, is shown to generically frustrate the geometry of crosslinking between the "grooves" of two neighboring filaments. We develop a coarse-grained model to investigate the interplay between the geometry of binding and mechanics of both linker and filament distortion, and we show that crosslinking in parallel bundles of helical filaments generates {\it intrinsic torques}, of the type that tend to wind bundle superhelically about its central axis. Crosslinking mediates a non-linear competition between the preference for bundle twist and the size-dependent mechanical cost of filament bending, which in turn gives rise to feedback between the global twist of self-assembled bundles and their lateral size. Finally, we demonstrate that above a critical density of bound crosslinkers, twisted bundles form with a thermodynamically preferred radius that, in turn, increases with a further increase in crosslinking bonds. We identify the {\it stiffness} of crosslinking bonds as a key parameter governing the sensitivity of bundle structure and assembly to the availability and affinity of crosslinkers.

preprint2010arXiv

Fluctuations and correlations during the shear flow of elastic particles near the jamming transition

We present a numerical study of the flow of an assembly of frictionless soft discs at zero temperature, in the vicinity of and slightly above the jamming density. We find that some of the flow properties, such as the fluctuations in the number of contacts or the shear modulus, display a critical like behaviour that is governed by the proximity to the jamming point. Dynamical correlations during a quasistatic deformation, however, are non critical and dominated by system size. At finite strain rates, these dynamical correlations acquire a finite, strain-rate dependent amplitude, that decreases when approaching the jamming point from above.

preprint2010arXiv

Semiflexible Filamentous Composites

Inspired by the ubiquity of composite filamentous networks in nature we investigate models of biopolymer networks that consist of interconnected floppy and stiff filaments. Numerical simulations carried out in three dimensions allow us to explore the microscopic partitioning of stresses and strains between the stiff and floppy fractions c_s and c_f, and reveal a non-trivial relationship between the mechanical behavior and the relative fraction of stiff polymer: when there are few stiff polymers, non-percolated stiff ``inclusions`` are protected from large deformations by an encompassing floppy matrix, while at higher fractions of stiff material the stiff network is independently percolated and dominates the mechanical response.

preprint2010arXiv

Superdiffusive, heterogeneous, and collective particle motion near the jamming transition in athermal disordered materials

We use computer simulations to study the microscopic dynamics of an athermal assembly of soft particles near the fluid-to-solid, jamming transition. Borrowing tools developed to study dynamic heterogeneity near glass transitions, we discover a number of original signatures of the jamming transition at the particle scale. We observe superdiffusive, spatially heterogeneous, and collective particle motion over a characteristic scale which displays a surprising non-monotonic behavior across the transition. In the solid phase, the dynamics is an intermittent succession of elastic deformations and plastic relaxations, which are both characterized by scale-free spatial correlations and system size dependent dynamic susceptibilities. Our results show that dynamic heterogeneities in dense athermal systems and glass-formers are very different, and shed light on recent experimental reports of `anomalous' dynamical behavior near the jamming transition of granular and colloidal assemblies.

preprint2009arXiv

Statics and Dynamics of the Wormlike Bundle Model

Bundles of filamentous polymers are primary structural components of a broad range of cytoskeletal structures, and their mechanical properties play key roles in cellular functions ranging from locomotion to mechanotransduction and fertilization. We give a detailed derivation of a wormlike bundle model as a generic description for the statics and dynamics of polymer bundles consisting of semiflexible polymers interconnected by crosslinking agents. The elastic degrees of freedom include bending as well as twist deformations of the filaments and shear deformation of the crosslinks. We show that a competition between the elastic properties of the filaments and those of the crosslinks leads to renormalized effective bend and twist rigidities that become mode-number dependent. The strength and character of this dependence is found to vary with bundle architecture, such as the arrangement of filaments in the cross section and pretwist. We discuss two paradigmatic cases of bundle architecture, a uniform arrangement of filaments as found in F-actin bundles and a shell-like architecture as characteristic for microtubules. Each architecture is found to have its own universal ratio of maximal to minimal bending rigidity, independent of the specific type of crosslink induced filament coupling; our predictions are in reasonable agreement with available experimental data for microtubules. Moreover, we analyze the predictions of the wormlike bundle model for experimental observables such as the tangent-tangent correlation function and dynamic response and correlation functions. Finally, we analyze the effect of pretwist (helicity) on the mechanical properties of bundles. We predict that microtubules with different number of protofilaments should have distinct variations in their effective bending rigidity.

preprint2009arXiv

The jamming transition as probed by quasistatic shear flow

We study the rheology of amorphous packings of soft, frictionless particles close to jamming. Implementing a quasistatic simulation method we generate a well defined ensemble of states that directly samples the system at its yield-stress. A continuous jamming transition from a freely-flowing state to a yield stress situation takes place at a well defined packing fraction, where the scaling laws characteristic of isostatic solids are observed. We propose that long-range correlations observed below the transition are dominated by this isostatic point, while those that are observed above the transition are characteristic of dense, disordered elastic media.

preprint2006arXiv

Floppy modes and non-affine deformations in random fiber networks

We study the elasticity of random fiber networks. Starting from a microscopic picture of the non-affine deformation fields we calculate the macroscopic elastic moduli both in a scaling theory and a self-consistent effective medium theory. By relating non-affinity to the low-energy excitations of the network (``floppy-modes'') we achieve a detailed characterization of the non-affine deformations present in fibrous networks.