Source author record

Byung-Joon Lee

Byung-Joon Lee appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

2works
3topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

2 published item(s)

preprint2016arXiv

Beam Emittance Measurement for PLS-II Linac

The PLS-II has a 100 MeV pre-injector for the 3 GeV Linac. A thermionic gun produces electron charge of 200 pC with a bunch duration of 500 ps by a 250 ps triggering pulser. At the pre-injector, one of the most important beam parameters to identify the beam quality is a transverse emittance of electron bunches. Therefore we measure the beam emittance and twiss functions at 100 MeV in order to match the beam optics to beam transport line and go through it to the storage ring. To get the transverse emittance measurement, well-known technique, quadrupole scan, is used at the pre-injector. The emittance were 0.591 mm-mrad in horizontal and 0.774 mm-mrad in vertical direction.

preprint2016arXiv

The Study of TVS Trigger Geometry and Triggered Vacuum Conditions

This presentation focuses on the optimization of the trigger unit of a six-rod TVS. The different configurations of the trigger pin and of the trigger electrode have been considered to study the electric field distribution at the triple points of the unit embedded in the cathode. To optimize the field enhancement, electric field simulations with a planar and a circular heads of the trigger pin in combinations with a convex and a concave shaped trigger electrodes have been done. The simulations were done with an applied trigger pulse voltage of Utrigger = 5 kV and with a discharge voltage the main switch of Uswitch = 20 kV. The experimental values had been Utrigger = 40 kV and Uswitch = 5 kV. The simulation results show that the combination of a circular trigger pin head and a concave trigger electrode yields the highest electric field of 9.6 .106 V/m at the triple point. In-parallel experiments have been performed with those four trigger configurations. The results of the experiments however cannot yet clearly confirm the trend in the results of the field simulations.