Source author record

Antonio Di Bartolomeo

Antonio Di Bartolomeo appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

13works
4topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

13 published item(s)

preprint2020arXiv

Field emission characteristics of InSb patterned nanowires

InSb nanowire arrays with different geometrical parameters, diameter and pitch, are fabricated by top-down etching process on Si(100) substrates. Field emission properties of InSb nanowires are investigated by using a nano-manipulated tungsten probe-tip as anode inside the vacuum chamber of a scanning electron microscope. Stable field emission current is reported, with a maximum intensity extracted from a single nanowire of about 1$μA$, corresponding to a current density as high as 10$^4$ A/cm$^2$. Stability and robustness of nanowire is probed by monitoring field emission current for about three hours. By tuning the cathode-anode separation distance in the range 500nm - 1300nm, the field enhancement factor and the turn-on field exhibit a non-monotonic dependence, with a maximum enhancement $β\simeq $ 78 and a minimum turn-on field $E_{ON} \simeq$ 0.033 V/nm for a separation d =900nm. The reduction of spatial separation between nanowires and the increase of diameter cause the reduction of the field emission performance, with reduced field enhancement ($β<$ 60) and increased turn-on field ($E_{ON} \simeq $ 0.050 V/nm). Finally, finite element simulation of the electric field distribution in the system demonstrates that emission is limited to an effective area near the border of the nanowire top surface, with annular shape and maximum width of 10 nm.

preprint2020arXiv

Field emission from AlGaN nanowires with low turn-on field

We fabricate AlGaN nanowires by molecular beam epitaxy and we investigate their field emission properties by means of an experimental setup using nano-manipulated tungsten tips as electrodes, inside a scanning electron microscope. The tip-shaped anode gives access to local properties and allows collecting electrons emitted from areas as small as 1$μm^2$. The field emission characteristics are analyzed in the framework of Fowler-Nordheim theory and we find a field enhancement factor as high as $β$ = 556 and a minimum turn-on field $E_{turn-on}$ = 17 V/$μ$m for a cathode-anode separation distance d = 500 nm. We show that for increasing separation distance, $E_{turn-on}$ increases up to about 35 V/$μ$m and $β$ decreases to 100 at d = 1600 nm. We also demonstrate the time stability of the field emission current from AlGaN nanowires for several minutes. Finally, we explain the observation of modified slope of the Fowler-Nordheim plots at low fields in terms of non-homogeneous field enhancement factors due to the presence of protruding emitters.

preprint2020arXiv

Gate-controlled field emission current from MoS$_2$ nanosheets

Monolayer molybdenum disulfide (MoS$_2$) nanosheets, obtained via chemical vapor deposition onto SiO$_2$/Si substrates, are exploited to fabricate field-effect transistors with n-type conduction, high on/off ratio, steep subthreshold slope and good mobility. The transistor channel conductance increases with the reducing air pressure due to oxygen and water desorption. Local field emission measurements from the edges of the MoS$_2$ nanosheets are performed in high vacuum using a tip-shaped anode. It is demonstrated that the voltage applied to the Si substrate back-gate modulates the field emission current. Such a finding, that we attribute to gate-bias lowering of the MoS$_2$ electron affinity, enables a new field-effect transistor based on field emission.

preprint2019arXiv

Pressure-Tunable Ambipolar Conduction and Hysteresis in Ultrathin Palladium Diselenide Field Effect Transistors

A few-layer palladium diselenide (PdSe2) field effect transistor is studied under external stimuli such as electrical and optical fields, electron irradiation and gas pressure. We observe ambipolar conduction and hysteresis in the transfer curves of the PdSe2 material unprotected and as-exfoliated. We tune the ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments. The prevailing p-type transport observed at room pressure is reversibly turned into dominant n-type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristic of the device as required in high-performance logic circuits. The transistor is immune from short channel effects but is affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after several minutes anneal at room temperature. The work paves the way toward the exploitation of PdSe2 in electronic devices by providing an experiment-based and deeper understanding of charge transport in PdSe2 transistors subjected to electrical stress and other external agents.

preprint2019arXiv

Temperature and gate effects on contact resistance and mobility in graphene transistors by TLM and Y-function methods

The metal-graphene contact resistance is one of the major limiting factors toward the technological exploitation of graphene in electronic devices and sensors. A high contact resistance can be detrimental to device performance and spoil the intrinsic great properties of graphene. In this paper, we fabricate graphene field-effect transistors with different geometries to study the contact and channel resistance as well as the carrier mobility as a function of gate voltage and temperature. We apply the transfer length method and the y-function method showing that the two approaches can complement each other to evaluate the contact resistance and prevent artifacts in the estimation of the gate-voltage dependence of the carrier mobility. We find that the gate voltage modulates the contact and the channel resistance in a similar way but does not change the carrier mobility. We also show that the raising temperature lowers the carrier mobility, has negligible effect on the contact resistance, and can induce a transition from a semiconducting to a metallic behavior of the graphene sheet resistance, depending on the applied gate voltage. Finally we show that eliminating the detrimental effects of the contact resistance on the transistor channel current almost doubles the carrier field-effect mobility and that a competitive contact resistance an be achieved by the zig-zag shaping of the Ni contact.

preprint2018arXiv

Environmental effects on the electrical characteristics of back-gated WSe2 field effect transistors

We study the effect of polymer coating, pressure and temperature on the electrical characteristics of monolayer WSe2 back-gated transistors with quasi-ohmic Ni/Au contacts. We find that the removal of a layer of poly(methyl methacrylate) or decreasing the pressure change the device conductivity from p to n-type. We study the current-voltage characteristics as a function of the temperature and measure a gate-tunable Schottky barrier at the contacts with a height of 60 meV in flat-band condition. We report and discuss a change in the mobility and the subthreshold slope observed with increasing temperature. Finally, we estimate the trap density at the WSe2/SiO2 interface and study the spectral photoresponse of the device, achieving a responsivity of 0.5 AW^-1 at 700 nm wavelength and 0.37 mWcm^-2 optical power.

preprint2016arXiv

Observation of field emission from GeSn nanoparticles epitaxially grown on silicon nanopillar arrays

We apply molecular beam epitaxy to grow GeSn-nanoparticles on top of Si-nanopillars patterned onto p-type Si wafers. We use X-ray photoelectron spectroscopy to confirm a metallic behavior of the nanoparticle surface due to partial Sn segregation as well as the presence of a superficial Ge oxide. We report the observation of stable field emission current from the GeSn-nanoparticles. We prove that field emission can be enhanced by preventing GeSn nanoparticles oxidation or by breaking the oxide layer through electrical stress. Finally, we show that GeSn/p-Si junctions have a rectifying behavior.

preprint2016arXiv

Side-gate leakage and field emission in all-graphene field effect transistors on SiO2/Si substrate

We fabricate planar all-graphene field-effect transistors with self-aligned side-gates at 100 nm from the main graphene conductive channel, using a single lithographic step. We demonstrate side-gating below 1V with conductance modulation of 35% and transconductance up to 0.5 mS/mm at 10 mV drain bias. We measure the planar leakage along the SiO2/vacuum gate dielectric over a wide voltage range, reporting rapidly growing current above 15 V. We unveil the microscopic mechanisms driving the leakage, as Frenkel-Poole transport through SiO2 up to the activation of Fowler-Nordheim tunneling in vacuum, which becomes dominant at high voltages. We report a field-emission current density as high as 1uA/um between graphene flakes. These findings are essential for the miniaturization of atomically thin devices.

preprint2016arXiv

Tunable Schottky barrier and high responsivity in graphene/Si-nanotip optoelectronic device

We demonstrate tunable Schottky barrier height and record photo-responsivity in a new-concept device made of a single-layer CVD graphene transferred onto a matrix of nanotips patterned on n-type Si wafer. The original layout, where nano-sized graphene/Si heterojunctions alternate to graphene areas exposed to the electric field of the Si substrate, which acts both as diode cathode and transistor gate, results in a two-terminal barristor with single-bias control of the Schottky barrier. The nanotip patterning favors light absorption, and the enhancement of the electric field at the tip apex improves photo-charge separation and enables internal gain by impact ionization. These features render the device a photodetector with responsivity (3 A/W for white LED light at 3 mW/cm2 intensity) almost an order of magnitude higher than commercial photodiodes. We extensively characterize the voltage and the temperature dependence of the device parameters and prove that the multi-junction approach does not add extra-inhomogeneity to the Schottky barrier height distribution. This work represents a significant advance in the realization of graphene/Si Schottky devices for optoelectronic applications.

preprint2015arXiv

Graphene field effect transistors with Niobium contacts and asymmetric transfer characteristics

We fabricate back-gated field effect transistors using Niobium electrodes on mechanically exfoliated monolayer graphene and perform electrical characterization in the pressure range from atmospheric down to 10-4 mbar. We study the effect of room temperature vacuum degassing and report asymmetric transfer characteristics with a resistance plateau in the n-branch. We show that weakly chemisorbed Nb acts as p-dopant on graphene and explain the transistor characteristics by Nb/graphene interaction with unpinned Fermi level at the interface.

preprint2015arXiv

Graphene Schottky diodes: an experimental review of the rectifying graphene/semiconductor heterojunction

In the past decade graphene has been one of the most studied material for several unique and excellent properties. Due to its two dimensional nature, physical and chemical properties and ease of manipulation, graphene offers the possibility of integration with the exiting semiconductor technology for next-generation electronic and sensing devices. In this context, the understanding of the graphene/semiconductor interface is of great importance since it can constitute a versatile standalone device as well as the building-block of more advanced electronic systems. Since graphene was brought to the attention of the scientific community in 2004, the device research has been focused on the more complex graphene transistors, while the graphene/semiconductor junction, despite its importance, has started to be the subject of systematic investigation only recently. As a result, a thorough understanding of the physics and the potentialities of this device is still missing. The studies of the past few years have demonstrated that graphene can form junctions with 3D or 2D semiconducting materials which have rectifying characteristics and behave as excellent Schottky diodes. The main novelty of these devices is the tunable Schottky barrier height, a feature which makes the graphene/semiconductor junction a great platform for the study of interface transport mechanisms as well as for applications in photo-detection, high-speed communications, solar cells, chemical and biological sensing, etc. In this paper, we review the state-of-the art of the research on graphene/semiconductor junctions, the attempts towards a modeling and the most promising applications.

preprint2014arXiv

Local characterization of ferromagnetic properties in ferromagnet/superconductor bilayer by Point Contact Andreev Reflection Spectroscopy

We realized point contact spectroscopy experiment on ferromagnet/superconductor bilayers. Differential conductance curves show several features that we explained within Bogoliubov-de Gennes formalism considering the presence of two interfaces in the normal-metal-tip/ferromagnet/superconductor device. We demonstrate that such configuration is suitable as local probe of the spin polarization and thickness of ferromagnetic layer, directly on bilayer areas. This is due to the high sensitivity of the Andreev surface states to the physical properties of the ferromagnetic interlayer.

preprint2011arXiv

Charge transfer and trapping as origin of a double dip in the transfer characteristics of graphene based field-effect transistors

We discuss the origin of an additional dip other than the charge neutrality point observed in transfer characteristics of graphene-based field-effect transistors. The double-dip is proved to arise from charge transfer between graphene and metal electrodes, while charge storage at the graphene/SiO2 interface enhances it. Considering different Fermi energy from the neutrality point along the channel and partial charge pinning at the contacts, we propose a model which explains all features in gate voltage loops.