On the practical interest of discrete Inverse Polya and Weibull-1 models in industrial reliability studies
Engineers often cope with the problem of assessing the lifetime of industrial components, under the basis of observed industrial feedback data. Usually, lifetime is modelled as a continuous random variable, for instance exponentially or Weibull distributed. However, in some cases, the features of the piece of equipment under investigation rather suggest the use of discrete probabilistic models. This happens for an equipment which only operates on cycles or on demand. In these cases, the lifetime is rather measured in number of cycles or number of demands before failure, therefore, in theory, discrete models should be more appropriate. This article aims at bringing some light to the practical interest for the reliability engineer in using two discrete models among the most popular: the Inverse Polya distribution (IPD), based on a Polya urn scheme, and the so-called Weibull-1 (W1) model. It is showed that, for different reasons, the practical use of both models should be restricted to specific industrial situations. In particular, when nothing is a priori known over the nature of ageing and/or data are heavily right-censored, they can remain of limited interest with respect to more flexible continuous lifetime models such as the usual Weibull distribution. Nonetheless, the intuitive meaning given to the IPD distribution favors its use by engineers in low (decelerated) ageing situations.