Source author record

Alain Spang

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

astro-ph.SR astro-ph.IM physics.optics astro-ph

Catalog footprint

Research overview

10works

4topics

4close collaborators

Actions

Is this your work?

Open graph Browse papers

preprint2022arXiv

Building a GRAVITY+ Adaptive Optics Test Bench

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

preprint2022arXiv

The crossed-sine wavefront sensor: first tests and results

The crossed-sine wavefront sensor (WFS) is a pupil plane wavefront sensor that measures the first derivatives of the wavefront. It is made by three main components: a gradient transmission filter (GTF) built from a product of sine functions rotated by 45 degrees around the optical axis, a 2x2 mini-lens array (MLA) at the focus of the tested optical system and a detector array located on a plane conjugated to the pupil. The basic principle consists in acquiring four pupil images simultaneously, each image being observed from different points located behind the GTF. After the simulation work which demonstrated the wavefront reconstruction capability, we are now in the phase of implementation of the prototype in the lab. The crossed-sine WFS could achieve a simultaneous high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to that attained by laser-interferometers. In this paper we introduce seven customized phase masks and make measurements of them.First tests and resultsare demonstrated, based on which we explore the performance of our crossed-sine WFS and make comparisons with that of the laser-interferomete

preprint2016arXiv

Experimental demonstration of a crossed cubes nuller for coronagraphy and interferometry

In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory. It is cheap, compact, and easy to align. The results demonstrate a high extinction rate in monochromatic light and confirm that the device is insensitive to its polarization state. Finally, the first lessons from the experiment are summarized and discussed in view of future space missions searching for extra-solar planets located in the habitable zone, either based on a coronagraphic telescope or a sparse-aperture nulling interferometer

preprint2014arXiv

The RCB star V854 Cen is surrounded by a hot dusty shell

Aims : The hydrogen-deficient supergiants known as R Coronae Borealis (RCB) stars might be the result of a double-degenerate merger of two white dwarfs (WDs), or a final helium shell flash in a planetary nebula central star. In this context, any information on the geometry of their circumstellar environment and, in particular, the potential detection of elongated structures, is of great importance. Methods : We obtained near-IR observations of V854 Cen with the AMBER recombiner located at the Very Large Telescope Interferometer (VLTI) array with the compact array (B $\leq$ 35m) in 2013 and the long array (B $\leq$ 140m) in 2014. At each time, V854 Cen was at maximum light. The $H$ - and $K$ -band continua were investigated by means of spectrally dependant geometric models. These data were supplemented with mid-IR VISIR/VLT images. Results : A dusty slightly elongated over density is discovered both in the $H$ - and $K$ -band images. With the compact array, the central star is unresolved ( $Θ\leq2.5$ \,mas), but a flattened dusty environment of $8 \times 11$ mas is discovered whose flux increases from about $\sim$ 20% in the $H$ band to reach about $\sim$ 50% at 2.3$\micron$, which indicates hot (T $\sim$ 1500\,K) dust in the close vicinity of the star. The major axis is oriented at a position angle (P.A.) of 126 $\pm$ 29 $°$ . Adding the long-array configuration dataset provides tighter constraints on the star diameter ( $Θ\leq1.0$ mas), a slight increase of the overdensity to $12 \times 15$ mas and a consistent P.A. of 133 $\pm$ 49 $°$ . The closure phases, sensitive to asymmetries, are null and compatible with a centro-symmetric, unperturbed environment excluding point sources at the level of 3% of the total flux in 2013 and 2014. The VISIR images exhibit a flattened aspect ratio at the 15-20% level at larger distances ( $\sim$ 1$\arcsec$) with a position angle of 92 $\pm$ 19 $°$ , marginally consistent with the interferometric observations. Conclusions : This is the first time that a moderately elongated structure has been observed around an RCB star. These observations confirm the numerous suggestions for a bipolar structure proposed for this star in the literature, which were mainly based on polarimetric and spectroscopic observations.

preprint2014arXiv

V838 Monocerotis: the central star and its environment a decade after outburst

Aims. V838 Monocerotis erupted in 2002, brightened in a series of outbursts, and eventually developed a spectacular light echo. A very red star emerged a few months after the outburst. The whole event has been interpreted as the result of a merger. Methods. We obtained near-IR and mid-IR interferometric observations of V838 Mon with the AMBER and MIDI recombiners located at the Very Large Telescope Interferometer (VLTI) array. The MIDI two-beam observations were obtained with the 8m Unit Telescopes between October 2011 and February 2012. The AMBER three-beam observations were obtained with the compact array (B $\leq$ m) in April 2013 and the long array (B $\leq$ 140m) in May 2014, using the 1.8m Auxiliary Telescopes. Results. A significant new result is the detection of a compact structure around V838 Mon, as seen from MIDI data. The extension of the structure increases from a FWHM of 25 mas at 8 μm to 70 mas at 13 μm. At the adopted distance of D = 6.1 $\pm$ 0.6 kpc, the dust is distributed from about 150 to 400 AU around V838 Mon. The MIDI visibilities reveal a flattened structure whose aspect ratio increases with wavelength. The major axis is roughly oriented around a position angle of -10 degrees, which aligns with previous polarimetric studies reported in the literature. This flattening can be interpreted as a relic of the 2002 eruption or by the influence of the currently embedded B3V companion. The AMBER data provide a new diameter for the pseudo-photosphere, which shows that its diameter has decreased by about 40% in 10yrs, reaching a radius R $_*$ = 750 $\pm$ 200 R $_{\odot}$ (3.5 $\pm$ 1.0 AU). Conclusions. After the 2002 eruption, interpreted as the merging of two stars, it seems that the resulting source is relaxing to a normal state. The nearby environment exhibits an equatorial over-density of dust up to several hundreds of AU.

preprint2013arXiv

SPIDAST: a new modular software to process spectro-interferometric measurements

Extracting stellar fundamental parameters from SPectro-Interferometric (SPI) data requires reliable estimates of observables and with robust uncertainties (visibility, triple product, phase closure). A number of fine calibration procedures is necessary throughout the reduction process. Testing departures from centro-symmetry of brightness distributions is a useful complement. Developing a set of automatic routines, called SPIDAST (made available to the community) to reduce, calibrate and interpret raw data sets of instantaneous spectro-interferograms at the spectral channel level, we complement (and in some respects improve) the ones contained in the amdlib Data Reduction Software. Our new software SPIDAST is designed to work in an automatic mode, free from subjective choices, while being versatile enough to suit various processing strategies. SPIDAST performs the following automated operations: weighting of non-aberrant SPI data (visibility, triple product), fine spectral calibration (sub-pixel level), accurate and robust determinations of stellar diameters for calibrator sources (and their uncertainties as well), correction for the degradations of the interferometer response in visibility and triple product, calculation of the Centro-Symmetry Parameter (CSP) from the calibrated triple product, fit of parametric chromatic models on SPI observables, to extract model parameters. SPIDAST is currently applied to the scientific study of 18 cool giant and supergiant stars, observed with the VLTI/AMBER facility at medium resolution in the K band. Because part of their calibrators have no diameter in the current catalogs, SPIDAST provides new determinations of the angular diameters of all calibrators. Comparison of SPIDAST final calibrated observables with amdlib determinations shows good agreement, under good and poor seeing conditions.

preprint2013arXiv

The binary Be star $δ$ Scorpii at high spectral and spatial resolution : II The circumstellar disk evolution after the periastron

Classical Be stars are hot non-supergiant stars surrounded by a gaseous circumstellar disk that is responsible for the observed infrared (IR) excess and emission lines. The influence of binarity on these phenomena remains controversial. We followed the evolution of the environment surrounding the binary Be star $δ$ Scorpii one year before and one year after the 2011 periastron to check for any evidence of a strong interaction between its companion and the primary circumstellar disk. We used the VLTI/AMBER spectro-interferometric instrument operating in the K band in high (12000) spectral resolution to obtain information on both the disk geometry and kinematics. Observations were carried out in two emission lines: Br $γ$ (2.172\, $μ$ m) and $\ion{He}{i}$ (2.056\, $μ$ m). We detected some important changes in $δ$ Scorpii's circumstellar disk geometry between the first observation made in April 2010 and the new observation made in June 2012. During the last two years the disk has grown at a mean velocity of 0.2\,km\,s $^{-1}$ . This is compatible with the expansion velocity previously found during the 2001-2007 period. The disk was also found to be asymmetric at both epochs, but with a different morphology in 2010 and 2012. Considering the available spectroscopic data showing that the main changes in the emission-line profiles occurred quickly during the periastron, it is probable that the differences between the 2010 and 2012 disk geometry seen in our interferometric data stem from a disk perturbation caused by the companion tidal effects. However, taking into account that no significant changes have occurred in the disk since the end of the 2011 observing season, it is difficult to understand how this induced inhomogeneity has been "frozen" in the disk for such a long period.

preprint2012arXiv

Stars with the B[e] phenomenon seen by long baseline interferometry

Thanks to the high spatial resolution provided by long baseline interferometry, it is possible to understand the complex circumstellar geometry around stars with the B[e] phenomenon. These stars are composed by objects in different evolutionary stages, like high- and low-mass evolved stars, intermediate-mass pre-main sequence stars and symbiotic objects. However, up to now more than 50% of the confirmed B[e] stars are not well classified, being called unclassified B[e] stars. From instruments like VLTI/AMBER and VLTI/MIDI, we have identified the presence of gaseous and dusty circumstellar disks, which have provided us with some hints related to the nature of these objects. Here, we show our results for two galactic stars with the B[e] phenomenon, HD 50138 and CPD-529243, based on interferometric measurements.

preprint2011arXiv

The galactic unclassified B[e] star HD 50138. II. Interferometric constraints on the close circumstellar environment

HD 50138 is a southern star that presents the B[e] phenomenon, but its evolutionary stage is still not well known. This object presents spectral variability, which can be explained by outbursts or shell phases and spectropolarimetric observations have shown the presence of a non-spherically symmetric circumstellar environment that is responsible for the B[e] phenomenon. Based on recent optical long baseline interferometric observations from the VLTI/MIDI and VLTI/AMBER, and also from the Keck segment-tilting experiment, we study the structure of the circumstellar environment of HD 50138, through a geometrical analytical modeling, also using the recent LITpro software and considering a large space of parameters. We resolve and describe its circumstellar geometry for the first time in detail. The presence of a dusty circumstellar disk with an orientation onto the sky-plane of 71+-7 degrees, which is perpendicular to the polarimetric measurements from the literature, was derived. We also derived that HD 50138 is seen under an intermediate angle related to the line of sight, 56+-4 degrees. In addition, the structure of the disk and the flux contributions of the gas and dust components is discussed.

preprint2006arXiv

First direct detection of a Keplerian rotating disk around the Be star $α$ Arae using the VLTI/AMBER instrument

Aims. We aim to study the geometry and kinematics of the disk around the Be star $α$ Arae as a function of wavelength, especially across the Br $γ$ emission line. The main purpose of this paper is to answer the question about the nature of the disk rotation around Be stars. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a gain by a factor 5 in spatial resolution compared to previous VLTI/MIDI observations. Moreover, it is possible to combine the high angular resolution provided with the (medium) spectral resolution of AMBER to study the kinematics of the inner part of the disk and to infer its rotation law. Results. We obtain for the first time the direct evidence that the disk is in keplerian rotation, answering a question that occurs since the discovery of the first Be star $γ$ Cas by father Secchi in 1866. We also present the global geometry of the disk showing that it is compatible with a thin disk + polar enhanced winds modeled with the SIMECA code. We found that the disk around $α$ Arae is compatible with a dense equatorial matter confined in the central region whereas a polar wind is contributing along the rotational axis of the central star. Between these two regions the density must be low enough to reproduce the large visibility modulus (small extension) obtained for two of the four VLTI baselines. Moreover, we obtain that $α$ Arae is rotating very close to its critical rotation. This scenario is also compatible with the previous MIDI measurements.

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Alain Spang

Research overview

Is this your work?

10 publications

Building a GRAVITY+ Adaptive Optics Test Bench

The crossed-sine wavefront sensor: first tests and results

Experimental demonstration of a crossed cubes nuller for coronagraphy and interferometry

The RCB star V854 Cen is surrounded by a hot dusty shell

V838 Monocerotis: the central star and its environment a decade after outburst

SPIDAST: a new modular software to process spectro-interferometric measurements

The binary Be star $δ$ Scorpii at high spectral and spatial resolution : II The circumstellar disk evolution after the periastron

Stars with the B[e] phenomenon seen by long baseline interferometry

The galactic unclassified B[e] star HD 50138. II. Interferometric constraints on the close circumstellar environment

First direct detection of a Keplerian rotating disk around the Be star $α$ Arae using the VLTI/AMBER instrument

See the researcher in context

Building this map preview

Alain Spang

Research overview

Is this your work?

10 publications

Building a GRAVITY+ Adaptive Optics Test Bench

The crossed-sine wavefront sensor: first tests and results

Experimental demonstration of a crossed cubes nuller for coronagraphy and interferometry

The RCB star V854 Cen is surrounded by a hot dusty shell

V838 Monocerotis: the central star and its environment a decade after outburst

SPIDAST: a new modular software to process spectro-interferometric measurements

The binary Be star δδδ Scorpii at high spectral and spatial resolution : II The circumstellar disk evolution after the periastron

Stars with the B[e] phenomenon seen by long baseline interferometry

The galactic unclassified B[e] star HD 50138. II. Interferometric constraints on the close circumstellar environment

First direct detection of a Keplerian rotating disk around the Be star ααα Arae using the VLTI/AMBER instrument

See the researcher in context

Building this map preview

The binary Be star $δ$ Scorpii at high spectral and spatial resolution : II The circumstellar disk evolution after the periastron

First direct detection of a Keplerian rotating disk around the Be star $α$ Arae using the VLTI/AMBER instrument