Source author record

A. B. Zorin

A. B. Zorin appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

16works
4topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

16 published item(s)

preprint2022arXiv

Superconducting microwave resonators with non-centrosymmetric nonlinearity

We investigated both theoretically and experimentally open-ended coplanar waveguide resonators with rf SQUIDs embedded in the central conductor at different positions. These rf SQUIDs can be tuned by an external magnetic field and thus may exhibit the non-centrosymmetric nonlinearity of $χ^{(2)}$ type with suppressed Kerr nonlinearity. We demonstrated that this nonlinearity allows for efficient mixing of $λ/2$ and $λ$ modes in the cavity and thus enables various parametric effects with three wave mixing. These effects are the second harmonic generation, the half tone generation, the parametric amplification in both degenerate and non-degenerate regimes and deamplification in degenerate regime.

preprint2016arXiv

Josephson traveling-wave parametric amplifier with three-wave mixing

We develop a concept of the traveling-wave Josephson parametric amplifier exploiting quadratic nonlinearity of a serial array of one-junction SQUIDs embedded in a superconducting transmission line. The external magnetic flux applied to the SQUIDs makes it possible to efficiently control the shape of their current-phase relation and, hence, the balance between quadratic and cubic (Kerr-like) nonlinearities. This property allows us to operate in the favorable three-wave-mixing mode with minimal phase mismatch, an exponential dependence of the power gain on number of sections $N$, a large bandwidth, a high dynamic range, and substantially separated signal ($f_s$) and pump ($f_p$) frequencies obeying relation $f_s+f_i = f_p$, where $f_i$ is the idler frequency. An estimation of the amplifier characteristics with typical experimental parameters, a pump frequency of $12$ GHz, and $N = 300$ yields a flat gain of 20 dB in the bandwidth of 5.6 GHz.

preprint2015arXiv

Magnetization reversal of an individual exchange biased permalloy nanotube

We investigate the magnetization reversal mechanism in an individual permalloy (Py) nanotube (NT) using a hybrid magnetometer consisting of a nanometer-scale SQUID (nanoSQUID) and a cantilever torque sensor. The Py NT is affixed to the tip of a Si cantilever and positioned in order to optimally couple its stray flux into a Nb nanoSQUID. We are thus able to measure both the NT's volume magnetization by dynamic cantilever magnetometry and its stray flux using the nanoSQUID. We observe a training effect and temperature dependence in the magnetic hysteresis, suggesting an exchange bias. We find a low blocking temperature $T_B = 18 \pm 2$ K, indicating the presence of a thin antiferromagnetic native oxide, as confirmed by X-ray absorption spectroscopy on similar samples. Furthermore, we measure changes in the shape of the magnetic hysteresis as a function of temperature and increased training. These observations show that the presence of a thin exchange-coupled native oxide modifies the magnetization reversal process at low temperatures. Complementary information obtained via cantilever and nanoSQUID magnetometry allows us to conclude that, in the absence of exchange coupling, this reversal process is nucleated at the NT's ends and propagates along its length as predicted by theory.

preprint2013arXiv

Nanoscale multifunctional sensor formed by a Ni nanotube and a scanning Nb nanoSQUID

Nanoscale magnets might form the building blocks of next generation memories. To explore their functionality, magnetic sensing at the nanoscale is key. We present a multifunctional combination of a scanning nanometer-sized superconducting quantum interference device (nanoSQUID) and a Ni nanotube attached to an ultrasoft cantilever as a magnetic tip. We map out and analyze the magnetic coupling between the Ni tube and the Nb nanoSQUID, demonstrate imaging of an Abrikosov vortex trapped in the SQUID structure - which is important in ruling out spurious magnetic signals - and reveal the high potential of the nanoSQUID as an ultrasensitive displacement detector. Our results open a new avenue for fundamental studies of nanoscale magnetism and superconductivity.

preprint2013arXiv

NbSi nanowire quantum-phase-slip circuits: dc supercurrent blockade, microwave measurements and thermal analysis

We present a detailed report of microwave irradiation of ultra-narrow superconducting nanowires. In our nanofabricated circuits containing a superconducting NbSi nanowire, a dc blockade of current flow was observed at low temperatures below a critical voltage Vc, a strong indicator of the existence of quantum phase-slip (QPS) in the nanowire. We describe the results of applying microwaves to these samples, using a range of frequencies and both continuous-wave and pulsed drive, in order to search for dual Shapiro steps which would constitute an unambiguous demonstration of quantum phase-slip. We observed no steps, and our subsequent thermal analysis suggests that the electron temperature in the series CrO resistors was significantly elevated above the substrate temperature, resulting in sufficient Johnson noise to wash out the steps. To understand the system and inform future work, we have constructed a numerical model of the dynamics of the circuit for dc and ac bias (both continuous wave and pulsed drive signals) in the presence of Johnson noise. Using this model, we outline important design considerations for device and measurement parameters which should be used in any future experiment to enable the observation of dual Shapiro steps at experimentally accessible temperatures and thus lead to the development of a QPS-based quantum current standard.

preprint2013arXiv

Reversal mechanism of an individual Ni nanotube simultaneously studied by torque and SQUID magnetometry

Using an optimally coupled nanometer-scale superconducting quantum interference device, we measure the magnetic flux originating from an individual ferromagnetic Ni nanotube attached to a Si cantilever. At the same time, we detect the nanotube's volume magnetization using torque magnetometry. We observe both the predicted reversible and irreversible reversal processes. A detailed comparison with micromagnetic simulations suggests that vortex-like states are formed in different segments of the individual nanotube. Such stray-field free states are interesting for memory applications and non-invasive sensing.

preprint2012arXiv

A hybrid superconductor-normal metal electron trap as a photon detector

A single-electron trap built with two Superconductor (S) - Insulator (I) - Normal (N) metal tunnel junctions and coupled to a readout SINIS-type single-electron transistor A (SET A) was studied in a photon detection regime. As a source of photon irradiation, we used an operating second SINIS-type SET B positioned in the vicinity of the trap. In the experiment, the average hold time of the trap was found to be critically dependent on the voltage across SET B. Starting in a certain voltage range, a photon-assisted electron escape was observed at a rate roughly proportional to the emission rate of the photons with energies exceeding the superconducting gap of S-electrodes in the trap. The discussed mechanism of photon emission and detection is of interest for low-temperature noise spectrometry and it can be of relevance for the ampere standard based on hybrid SINIS turnstiles.

preprint2011arXiv

Long hold times in a two-junction electron trap

The hold time $τ$ of a single-electron trap is shown to increase significantly due to suppression of environmentally assisted tunneling events. Using two rf-tight radiation shields instead of a single one, we demonstrate increase of $τ$ by a factor exceeding $10^3$, up to about 10 hours, for a trap with only two superconductor (S) -- normal-metal (N) tunnel junctions and an on-chip resistor $R$ (R-SNS structure). In the normal state, the improved shielding made it possible to observe $τ\sim$ 100 s, which is in reasonable agreement with the quantum-leakage-limited level expected for the two-electron cotunneling process.

preprint2011arXiv

Quantum phase slip interference device based on superconducting nanowire

We propose a transistor-like circuit including two serially connected segments of a narrow superconducting nanowire joint by a wider segment with a capacitively coupled gate in between. This circuit is made of amorphous NbSi film and embedded in a network of on-chip Cr microresistors ensuring a sufficiently high external electromagnetic impedance. Assuming a virtual regime of quantum phase slips (QPS)in two narrow segments of the wire, leading to quantum interference of voltages on these segments, this circuit is dual to the dc SQUID. Our samples demonstrated appreciable Coulomb blockade voltage (analog of critical current of the SQUIDs) and periodic modulation of this blockade by an electrostatic gate (analog of flux modulation in the SQUIDs). The model of this QPS transistor is discussed.

preprint2011arXiv

Superconducting quantum interference devices with submicron Nb/HfTi/Nb junctions for investigation of small magnetic particles

We investigated, at temperature $4.2\,\mathrm{K}$, electric transport, flux noise and resulting spin sensitivity of miniaturized Nb direct current superconducting quantum interference devices (SQUIDs) based on submicron Josephson junctions with HfTi barriers. The SQUIDs are either of the magnetometer-type or gradiometric in layout. In the white noise regime, for the best magnetometer we obtain a flux noise $S_Φ^{1/2}=250\,\mathrm{n}Φ_0/\mathrm{Hz}^{1/2}$, corresponding to a spin sensitivity $S^{1/2}_μ\,\ge\,29\,μ_B/\mathrm{Hz}^{1/2}$. For the gradiometer we find $S_Φ^{1/2}=300\,\mathrm{n}Φ_0/\mathrm{Hz}^{1/2}$ and $S^{1/2}_μ\,\ge\,44\,μ_B/\mathrm{Hz}^{1/2}$. The devices can still be optimized with respect to flux noise and coupling between a magnetic particle and the SQUID, leaving room for further improvement towards single spin resolution.

preprint2011arXiv

Towards the observation of phase locked Bloch oscillations in arrays of small Josephson junctions

We have designed an experiment and performed extensive simulations and preliminary measurements to identify a set of realistic circuit parameters that should allow the observation of constant-current steps at I=2ef in short arrays of small Josephson junctions under external AC drive of frequency f. Observation of these steps demonstrating phase lock of the Bloch oscillations with the external drive requires a high-impedance environment for the array, which is provided by on-chip resistors close to the junctions. We show that the width and shape of the steps crucially depend on the shape of the drive and the electron temperature in the resistors.

preprint2010arXiv

Implementation of superconductor-ferromagnet-superconductor pi-shifters in superconducting digital and quantum circuits

The difference between the phases of superconducting order parameter plays in superconducting circuits the role similar to that played by the electrostatic potential difference required to drive a current in conventional circuits. This fundamental property can be altered by inserting in a superconducting circuit a particular type of weak link, the so-called Josephson $π$-junction having inverted current-phase relation and enabling a shift of the phase by $π$. We demonstrate the operation of three superconducting circuits -- two of them are classical and one quantum -- which all utilize such $π$-phase shifters realized using superconductor-ferromagnet-superconductor sandwich technology. The classical circuits are based on single-flux-quantum cells, which are shown to be scalable and compatible with conventional niobium-based superconducting electronics. The quantum circuit is a $π$-phase biased qubit, for which we observe coherent Rabi oscillations and compare the measured coherence time with that of conventional superconducting phase qubits.

preprint2009arXiv

Pumping properties of the hybrid single-electron transistor in dissipative environment

Pumping characteristics were studied of the hybrid normal-metal/superconductor single-electron transistor embedded in a high-ohmic environment. Two 3 micrometer-long microstrip resistors of CrOx with a sum resistance R=80kOhm were placed adjacent to this hybrid device. Substantial improvement of pumping and reduction of the subgap leakage were observed in the low-MHz range. At higher frequencies 0.1-1GHz, a slowdown of tunneling due to the enhanced damping and electron heating negatively affected the pumping, as compared to the reference bare devices.

preprint2009arXiv

Superconducting phase qubit based on the Josephson oscillator with strong anharmonicity

We propose a superconducting phase qubit on the basis of the radio-frequency SQUID with the screening parameter value $β_L = (2π/Φ_0)LI_c \approx 1$, biased by a half flux quantum $Φ_e=Φ_0/2$. Significant anharmonicity ($> 30%$) can be achieved in this system due to the interplay of the cosine Josephson potential and the parabolic magnetic-energy potential that ultimately leads to the quartic polynomial shape of the well. The two lowest eigenstates in this global minimum perfectly suit for the qubit which is insensitive to the charge variable, biased in the optimal point and allows an efficient dispersive readout. Moreover, the transition frequency in this qubit can be tuned within an appreciable range allowing variable qubit-qubit coupling.

preprint2007arXiv

Quasi-particle transitions in charge-phase qubits probed by rf oscillations

We investigated transitions in Al charge-phase qubits of SQUID-configuration inductively coupled to an rf tank circuit that made it possible to read out the state by measuring the inductance of the qubit. Depending on the flux and charge bias and the amplitude of the rf oscillations we probed either the ground state or a dynamic change of the qubit states which we attributed to stochastic single quasi-particle tunneling onto and off the qubit island and exchange of energy with the qubit. Within this model, a selection rule for quasi-particle-induced transitions in the qubit is discussed.

preprint1999arXiv

Superconducting Electrometer Based on the Resistively Shunted Bloch Transistor

We have fabricated the Bloch transistor shunted on-chip by a small-sized Cr resistor with Rs about 1 kOhm. The Bloch transistor normally consists of two small Josephson junctions connected in series, which in our case have been replaced by two superconducting interferometer loops, each with two junctions in parallel. A capacitively coupled gate is supplied to control the induced charge of the small intermediate electrode (island) of the transistor. The measured I-V curves show no hysteresis and correspond to the operation of a effective Josephson junction at the high-damping and strong-noise limits. The critical current of the system was found to be close to its nominal value, that is in accordance with the electromagnetic environment theory. The I-V curves were modulated by the gate with a period of e and a maximum swing of about 2 /mu_V. Such rather moderate modulation results from the Josephson-to- charging energies ratio, Ej/Ec about 9, in our sample being far from its optimum value of 0.3 up to 1.