Source author record

A. Ajay

A. Ajay appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

7works
4topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

7 published item(s)

preprint2020arXiv

Solubility limit of Ge Dopants in AlGaN: a Chemical and Microstructural Investigation down to the Nanoscale

Attaining low resistivity AlGaN layers is the keystone to improve the efficiency of light emitting devices in the ultraviolet spectral range. Here, we present a microstructural analysis of Ge-doped AlGaN samples with Al mole fraction from x=0 to 1, and nominal doping level in the range of 1E20 cm-3, together with the measurement of Ge concentration and its spatial distribution down to the nm scale. AlGaN:Ge samples with x smaller or equal to 0.2 do not present any sign of inhomogeneity. However, samples with x > 0.4 display micrometer-size Ge crystallites at the surface. Ge segregation is not restricted to the surface: Ge-rich regions with a size of tens of nanometers are observed inside the AlGaN:Ge layers, generally associated with Ga-rich regions around structural defects. With this local exceptions, the AlGaN:Ge matrix present an homogenous Ge composition which can be significantly lower than the nominal doping level. Precise measurements of Ge in the matrix provide a view of the solubility diagram of Ge in AlGaN as a function of the Al mole fraction. The solubility of Ge in AlN is extremely low. Between AlN and GaN, the solubility increases linearly with the Ga mole fraction in the ternary alloy, which suggests that the Ge incorporation takes place by substitution of Ga atoms only. The maximum percentage of Ga sites occupied by Ge saturates around 1%. The solubility issues and Ge segregation phenomena at different length scales likely play a role in the efficiency of Ge as n-type AlGaN dopant, even at Al concentrations where Ge DX centers are not expected to manifest. Therefore, this information can have direct impact in the performance of Ge-doped AlGaN light emitting diodes, particularly in the spectral range for disinfection (around 260 nm), which requires heavily-doped alloys with high Al mole fraction.

preprint2019arXiv

Assessment of AlGaN/AlN superlattices on GaN nanowires as active region of electron-pumped ultraviolet sources

In this paper, we describe the design and characterization of 400-nm-long (88 periods) AlxGa1-xN/AlN (0 < x < 0.1) quantum dot superlattices deposited on self-assembled GaN nanowires for application in electron-pumped ultraviolet sources. The optical performance of GaN/AlN superlattices on nanowires is compared with the emission of planar GaN/AlN superlattices with the same periodicity and thickness grown on bulk GaN substrates along the N-polar and metal-polar crystallographic axes. The nanowire samples are less sensitive to nonradiative recombination than planar layers, attaining internal quantum efficiencies (IQE) in excess of 60% at room temperature even under low injection conditions. The IQE remains stable for higher excitation power densities, up to 50 kW/cm2. We demonstrate that the nanowire superlattice is long enough to collect the electron-hole pairs generated by an electron beam with an acceleration voltage VA = 5 kV. At such VA, the light emitted from the nanowire ensemble does not show any sign of quenching under constant electron beam excitation (tested for an excitation power density around 8 kW/cm2 over the scale of minutes). Varying the dot/barrier thickness ratio and the Al content in the dots, the nanowire peak emission can be tuned in the range from 340 to 258 nm. Keywords: GaN, AlN, nanowire, ultraviolet

preprint2016arXiv

Effect of the quantum well thickness on the performance of InGaN photovoltaic cells

We report on the influence of the quantum well thickness on the effective band gap and conversion efficiency of In0.12Ga0.88N/GaN multiple quantum well solar cells. The band-to-band transition can be redshifted from 395 to 474 nm by increasing the well thickness from 1.3 to 5.4 nm, as demonstrated by cathodoluminescence measurements. However, the redshift of the absorption edge is much less pronounced in absorption: in thicker wells, transitions to higher energy levels dominate. Besides, partial strain relaxation in thicker wells leads to the formation of defects, hence degrading the overall solar cell performance.

preprint2016arXiv

Ge doping of GaN beyond the Mott transition

We present a study of germanium as n-type dopant in wurtzite GaN films grown by plasma-assisted molecular beam epitaxy, reaching carrier concentrations of up to 6.7E20 cm-3 at 300K, well beyond the Mott density. The Ge concentration and free carrier density were found to scale linearly with the Ge flux in the studied range. All the GaN:Ge layers present smooth surface morphology with atomic terraces, without trace of pits or cracks, and the mosaicity of the samples has no noticeable dependence on the Ge concentration. The variation of the GaN:Ge band gap with the carrier concentration is consistent with theoretical calculations of the band gap renormalization due to electron-electron and electron-ion interaction, and Burstein-Moss effect.

preprint2016arXiv

P-i-n InGaN homojunctions (10-40% In) synthesized by plasma-assisted molecular beam epitaxy with extended photoresponse to 600 nm

We report the influence of the In mole fraction on the material and electrical characteristics of p-i-n InxGa1-xN homojunctions (x = 0.10-0.40) synthesized by plasma-assisted molecular-beam epitaxy on GaN-on-sapphire substrates. Junctions terminated with p-InGaN present improved carrier extraction efficiency in comparison with devices capped with p-GaN, due to the deleterious effect of polarization discontinuities on the device performance. We demonstrate that the presence of Mg does not perturb the In incorporation in InGaN, and it leads to a significant reduction of the stacking fault density. p-In0.3Ga0.7N layers with a hole concentration of 3.2x1018 cm-3 are demonstrated. InGaN homojunction devices show a peak EQE = 14+-2% in the blue-to-orange spectral region, and an extended cutoff to 600 nm.

preprint2015arXiv

Intersubband transitions in nonpolar GaN/Al(Ga)N heterostructures in the short and mid-wavelength infrared regions

This paper assesses nonpolar m- and a-plane GaN/Al(Ga)N multi-quantum-wells grown on bulk GaN for intersubband optoelectronics in the short- and mid-wavelength infrared ranges. The characterization results are compared to those for reference samples grown on the polar c-plane, and are verified by self-consistent Schrödinger-Poisson calculations. The best results in terms of mosaicity, surface roughness, photoluminescence linewidth and intensity, as well as intersubband absorption are obtained from m-plane structures, which display room-temperature intersubband absorption in the range from 1.5 to 2.9 um. Based on these results, a series of m-plane GaN/AlGaN multi-quantum-wells were designed to determine the accessible spectral range in the mid-infrared. These samples exhibit tunable room-temperature intersubband absorption from 4.0 to 5.8 um, the long-wavelength limit being set by the absorption associated with the second order of the Reststrahlen band in the GaN substrates.

preprint2015arXiv

Nonpolar m-plane GaN/AlGaN heterostructures with intersubband transitions in the 5 to 10 THz band

This paper assesses intersubband transitions in the 1 to 10 THz frequency range in nonpolar m-plane GaN/AlGaN multi-quantum-wells deposited on free-standing semi-insulating GaN substrates. The quantum wells were designed to contain two confined electronic levels, decoupled from the neighboring wells. Structural analysis reveals flat and regular quantum wells in the two perpendicular inplane directions, with high-resolution images showing inhomogeneities of the Al composition in the barriers along the growth axis. We do not observe extended structural defects introduced by the epitaxial process. Low-temperature intersubband absorption from 1.5 to 9 THz is demonstrated, covering part of the 7 to 10 THz band forbidden to GaAs-based technologies.