Paper detail

Volume phase holographic gratings for the Subaru Prime Focus Spectrograph: performance measurements of the prototype grating set

The Prime Focus Spectrograph (PFS) is a major instrument under development for the 8.2 m Subaru telescope. Four identical spectrograph modules are located in a room above one Nasmyth focus. A 55~m fiber optic cable feeds light to the spectrographs from a robotic positioner at the prime focus, behind the wide-field corrector developed for Hyper Suprime-Cam. The positioner contains 2400 fibers and covers a 1.3~degree hexagonal field of view. The spectrograph optical design consists of a Schmidt collimator, two dichroic beamsplitters to split the light into three channels, and for each channel a volume phase holographic (VPH) grating and a dual-corrector, modified Schmidt reimaging camera. This design provides a 275~mm collimated beam diameter, wide simultaneous wavelength coverage from 380~nm to 1.26~\textmu m, and good imaging performance at the fast f/1.05 focal ratio required from the cameras to avoid oversampling the fibers. The three channels are designated as the blue, red, and near-infrared (NIR), and cover the bandpasses 380--650~nm (blue), 630--970~nm (red), and 0.94--1.26~\textmu m (NIR). A mosaic of two Hamamatsu 2k$\times$4k, 15~\textmu m pixel CCDs records the spectra in the blue and red channels, while the NIR channel employs a 4k$\times$4k, substrate-removed HAWAII-4RG array from Teledyne, with 15~\textmu m pixels and a 1.7~\textmu m wavelength cutoff. VPH gratings were an obvious choice for PFS and a set of three prototype VPH gratings (one each of the blue, red, and NIR designs) was ordered and has been recently delivered. In this paper we present the design and specifications for the PFS gratings, the plan and setups used for testing both the prototype and final gratings, and results from recent optical testing of the prototype grating set.