Paper detail

Time of arrival imaging: The proof of concept for a novel medical imaging modality

It has been shown that with the use of ultra-wideband (UWB) electromagnetic signal and time of arrival (ToA) principle, it is possible to locate medical implants given the permittivity distribution of the body. We propose a new imaging modality using the reverse process to acquire permittivity distributions as a surrogate of human anatomy. In the proposed systems, the locations of the signal source, receiver, and signal shapes are assumed to be known exactly. The measured data is recorded as the time it takes for the signal to travel from the signal source to the signal receiver. The finite-difference-time-domain (FDTD) method is used for the modeling of signal propagation within the phantom, which is used for both simulation and image reconstruction. Image reconstruction is achieved using linear regression on the training pairs, which includes randomly generated images and its corresponding arrival times generated using the FDTD approach. The linear weights of the training images are generated to minimize the difference between the arrival time of the reconstruction image and the measured arrival time. A simulation study using UWB signal with the central frequency of 300 MHz and the Shepp-Logan phantom was carried out. Ten-picosecond timing resolution is used for the simulation and image reconstruction. The quantitative difference between the arrival times of the phantom and the reconstructed image reduced with an increased iteration number. The quantitative error of the reconstructed image reached below 10% after 900 iterations, and 8.4% after 1200 iterations. With additional post-smoothing to suppress the introduced noise pattern through reconstruction, 6.5% error was achieved. In this paper, an approach that utilizes the ToA principle to achieve transmission imaging with radio waves is proposed and validated using a simulation study.