Paper detail

The paradox of controlling complex networks: control inputs versus energy requirement

In this paper, we investigate the linear controllability framework for complex networks from a physical point of view. There are three main results. (1) If one applies control signals as determined from the structural controllability theory, there is a high probability that the control energy will diverge. Especially, if a network is deemed controllable using a single driving signal, then most likely the energy will diverge. (2) The energy required for control exhibits a power-law scaling behavior. (3) Applying additional control signals at proper nodes in the network can reduce and optimize the energy cost. We identify the fundamental structures embedded in the network, the longest control chains, which determine the control energy and give rise to the power-scaling behavior. (To our knowledge, this was not reported in any previous work on control of complex networks.) In addition, the issue of control precision is addressed. These results are supported by extensive simulations from model and real networks, physical reasoning, and mathematical analyses. Notes on the submission history of this work: This work started in late 2012. The phenomena of power-law energy scaling and energy divergence with a single controller were discovered in 2013. Strategies to reduce and optimize control energy was articulated and tested in 2013. The senior co-author (YCL) gave talks about these results at several conferences, including the NETSCI 2014 Satellite entitled "Controlling Complex Networks" on June 2, 2014. The paper was submitted to PNAS in September 2014 and was turned down. It was revised and submitted to PRX in early 2015 and was rejected. After that it was revised and submitted to Nature Communications in May 2015 and again was turned down.