Paper detail

Model predictive control of voltage profiles in MV networks with distributed generation

The Model Predictive Control (MPC) approach is used in this paper to control the voltage profiles in MV networks with distributed generation. The proposed algorithm lies at the intermediate level of a three-layer hierarchical structure. At the upper level a static Optimal Power Flow (OPF) manager computes the required voltage profiles to be transmitted to the MPC level, while at the lower level local Automatic Voltage Regulators (AVR), one for each Distributed Generator (DG), track the reactive power reference values computed by MPC. The control algorithm is based on an impulse response model of the system, easily obtained by means of a detailed simulator of the network, and allows to cope with constraints on the voltage profiles and/or on the reactive power flows along the network. If these constraints cannot be satisfied by acting on the available DGs, the algorithm acts on the On-Load Tap Changing (OLTC) transformer. A radial rural network with two feeders, eight DGs, and thirty-one loads is used as case study. The model of the network is implemented in DIgSILENT PowerFactory, while the control algorithm runs in Matlab. A number of simulation results is reported to witness the main characteristics and limitations of the proposed approach.